Files transferred from external hard drive (backed up from pc) are locked. Can't unlock & can't delete them from Mac now.
I just picked up a new Mac and have been trying to transfer files backed up to an external hard drive from a PC. I was able to transfer some of the files without issue, but most of the files show that they are locked. Now that they are on the Mac I can't unlock or delete them.
Try http://www.apple.com/ie/support/macbasics/
This will explain Mac in PC terminology
Allan
Similar Messages
-
Transfer old mac files from external hard drive back onto my mac
I just had my logic board replaced by Apple, out of warranty, on my 2008 Macbook pro. As advised by Apple, I had another computer store copy my entire hard drive onto an external drive as a backup. The guy at the other computer store wiped the hard drive on my computer and I sent it away for the repair.
I have my laptop back but for the life of me can't figure out how to copy my external hard drive back onto my macbook. Please help??!! I have already been without my computer for the 10 days it took Apple to do the repair and need to get my work done. The guy at the computer store said he made an exact copy of my hard drive. He also said that since my external hard drive was a little older (never used but purchased a few years ago) it might take a few hours to copy because it took him a few hours to get the files off my mac. Thanks to anyone who can help!Why don't you attach the HDD with your data on it to your MBP and then drag and drop your folders to your restored MBP.
Ciao.
When you say that he made an exact copy of your MBP HDD, is it a clone with the OS on it? If so you can use Disk Utility>Restore to copy the information to your MBP.
Message was edited by: OGELTHORPE -
Can Time Machine on a Mac Book Pro 10.5.8 back up an external hard drive (working files) to another external hard drive (WD dual backup)?
I have Mountain Lion here ready to upgrade, but I'm scared of what will happen - there's always something when you upgrade, but I guess that's for a different post!
Yes, it's a different post, but let's make a comment any way.
Your power pc apps will not work when you upgrade to Mountain Lion. You will have to replace all the apps you use. -
Copying saved iphoto library from external hard drive back to Macbook Pro
Please help, I have accidentally managed to permanently delete my iphoto library and by this I mean that I somehow dragged my library into trash and then emptied it. I don't know how this happend but I quite quickly found out I had done it and shut my computer down. I have since done a recovery with disk drill and have hopefully recovered most of my photos though I havent had time to look through all the 1000's of photos yet. I do have a copied version of my library on an external hard drive that I did in 2012 and I have tried to copy this library back to my pictures folder so i at least have my photos up to 2012 back but it is not working. I have read through some of the threads on here regarding iphoto library back ups and I think the issue might be that the external hard drive is formatted Fat32 and not os extended.
I am hoping someone can help me get this working. Here are the facts.
1. I am running iphoto 11, version 9.2.3 on a macbook pro running os x 10.6.8
2. The copied iphoto library is on an external hard drive that is fat32 formatted. I can open the package contents and see the originals folder with all the yearly folders inside and all the numbered folders inside that with the pictures in them, so I know the pictures are there.
3. If I try to copy the library folder over to the pictures folder on the macbook i just get a pop up window saying 'preparing to copy iphoto library' and the scrolling bar but the copy doesn't actually start.
4. If I try to open the library through iphoto by holidng down the option key, iphoto tells me that the library has to be upgraded but i am reluctant to upgrade the original copy of the library. I would prefer to copy it first in case anything goes wrong but then i have the problem above that the copy doesn't work
Thank you in advance for any help.The copied iphoto library is on an external hard drive that is fat32 formatted.
Therein lies the problem. iPhoto libraries need to be stored, placed on a disk formatted OS X Extended (journaled). The FAT format doesn't support the complexity of an iPhoto library and can, and more often than not, corrupt a library.
Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download the free version of iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed, i.e. in the Pictures folder of your MBP. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT -
How do I import movie event to iMovie 9.0.9 from external hard drive back up copy
I was using an external hard drive as my primary location for iMovie events and projects when that hard drive crashed. I was able to recover the data and save it to a new hard drive, but now iMovie 9.0.9 does not recognize the iMovie Events that were recovered and saved on the new hard drive (because iMovie didn't place them there in the first place). The recovered iMovie Projects work fine, but when I put the iMovie events into a folder called "iMovie Events" on the external hard drive, iMovie doesn't recognize them. In iMovie, under Events, I can see the name of the recovered iMovie Event, but when I click on it, it says no movie clips available.
I have a 2010 mac Mini with OS X 10.9., and haven't upgraded to iMovie 11 yet because when I tried, it mixed up the iMovie events and I couldn't see them all.
I appreciate your help.That's the way they appear. In the <event name> folder, there are the clips and a few subfolders including Thumbnails and something else (I'm not in front of my mac right now). One other thing: the projects that use these events work. I can play the project, i just can't see the clips in the Events section. Unfortunately I hadn't gotten around to creating projects from all of these events yet, so i only some of the events have corresponding projects.
When I drag the <event name> folder into the iMovie Events folder and then run iMovie, an event icon will appear for that event (in current year 2014, even though the event may be years old), but I can't play or see the clips. Any other suggestions?
Thanks again. -
I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please
Upgrade the version of itunes on the new computer
Itunes.com for free download.
Peace -
My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!
This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2 -
I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy. -
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
Also note which method you're using to create a backup.
Clinton -
On the advice of the Chicago Mac Genius Bar, in order to get better performance on my few years old MBA, I copied my Home folders (but not Library) to an external hard drive, created a new user, deleted the old user, and tried to copy the Home folder contents from the external hard drive back to the MBA under the new user. However, I get an error message and can't open most of the folders on the external hard drive (e.g. "The folder “Desktop” can’t be opened because you don’t have permission to see its contents.") Help! Thanks.
As captfred says, yes (as long as the drive is formatted for a Mac, not Windoze).
You might want to review the [Time Machine Tutorial|http://www.apple.com/findouthow/mac/#timemachinebasics] and perhaps browse [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum). -
Audio problems after transferring from external hard drive.
I've transferred an unfinished movie from an external hard drive back onto my mac but now when I play it the audio jolts and is crackly for lack of a better word. How can I fix this?
It's a birthday present for someone that I need to give today so help would be much appreciated!Is your external drive formatted for Mac? Should be Mac OS extended or Mac OS extended (journaled). If it's not, you will need to reformat using the Utilities/Disk Utility app on your Mac -- but reformatting will erase all data on the drive.
The bad playback may just be an iMovie playback display problem that might not appear on your final project. Quickly share your project to iDVD and play it there to see if the sound acts up. If it doesn't, then it's just a playback display issue in iMovie. That can be caused by overlapping sound tracks or too many audio clips or effects, although you didn't mention whether you were talking about audio embedded in your video clips or separate audio clips in your audio track.
The most favored audio format is .aiff, so if you have separate audio clips check your format to see what you have got, and if not .aiff try converting it to .aiff. You can do that in iTunes or by exporting it under Expert Settings as an aiff file to your desktop and then dragging it back in to your movie.
You could try the old standby of closing iMovie and trashing the file com.apple.iMovie.plist found in User (your name)/Library/Preferences. Then do a permissions repair using the Utilities/Disk Utility app on your Mac. Make sure you have at least 15GB of free space for iMovie to work efficiently.
If you are using iTunes music, you might try first burning the music to a music CD, and then importing it from there into your iMovie project.
Hope this helps. Perhaps others will have more suggestions. -
How do I move my iTunes library from my external hard drive back to my computer?
Just wondering how do I move my entire iTunes library from my external hard drive back to my computer? It was moved to an external hard drive a few years ago, and now I'm wondering how to move it back to my iMac to increase performance.
Where does it belong in the computer?
Any suggestions?The library itself is the /Home/Music/iTunes/ folder in its entirety. Did you also change where preference files were stored? Normally, they would be in the /Home/Library/Preferences/ folder.
-
In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6. I do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from losing any files? Also, does anyone know how to search the iTunes store by price? I'm particularly interested in movies and audiobooks... Thanks
iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first. Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one? The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless). To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes. To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
Realize what you are talking about is not "backup". Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded. -
I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?
If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.
Maybe you are looking for
-
Convert seconds to [h]:mm:ss format on report text box
I want to convert seconds to hh:mm:ss format on the report text box. I use =Format(Sum([MyTime])/(24*60*60),"hh:nn:ss"), but it does not work if the hours more than 24 hours, since the format is for the time format for the day. I need the result sho
-
What Are The Steps Get Back iTunes Library After PC Crash?
Thanks in advance for any/all help. My PC got infected, then crashed and I was unable to backup libraries in advance. So, is there a way that I can recover by copying the files on my iPod (20Gb) back to my machine that has a new, clean version of iTu
-
Upgrading a Unibody Aluminium Macbook from 10.6.8 to ?
Hi Id like to upgrade one of my older macs, but im not sure what I can upgrade to. Im not sure what year it is - its the rareish unibody macbook (aluminium) which looks exactly the same as a Macbook pro 13. Specs are:- 10.6.8 2.4ghz Intel Core 2 Duo
-
Process only when there is a change in source file
Hi Experts, My scenario is File to File. Requirement is, source file need to be picked up only if there is change in the data. Please guide me the approach for this. Thanks Kishore
-
Flash variables will not pass on enterFrame
I currently have the following code setup to pass variables to a flash when a button is clicked: on click flashSprite = sprite("videoplayer") rootRef = flashSprite.getVariable("root1", false) rootRef.setUpDoc(the moviePath&"xml"&dirPat