Files Transferred to Revel..Why?

Only 4 of my 2600 photo's were transfered to Revel.From a Windows XP computer to a new Windows 8 computer,I received an e-mail from Adobe saying they had been moved to a new home,Where! Any idea's or comments why?

Ronnie-
Your Photoshop.com account only had 4 photos in it. They migrated to your Photoshop.com library in Revel. You also have 54 photos in Ronnie's library that you have since uploaded.
My best guess without knowing any details is that you are an Elements user and have 2600 photos stored in the Elements organizer. If this is the case, then they only are saved to the cloud at Photoshop.com if the Sync was setup and enabled. The only files that migrated to Revel were ones that were already stored at Photoshop.com when the migration took place.
You can upload additional photos to Revel from your hard drive if you have more that you want to store. Here is a link showing all the ways to get photos into Revel:
FAQ: How do I add (upload) files to Revel?
http://forums.adobe.com/thread/1162795?tstart=0
Pattie

Similar Messages

  • Why does it say "doesn't accept file transfers"?

    when I try to send a file over ichat I keep getting the message that "ichat doesn't accept file transfers"  What am I doing wrong?

    HI,
    It can depend on which Jabber server you are using and what has been enabled on that particular Server.
    That's one possible.
    Another is that the Applications at the other end is not set up to accept File Transfers, such as someone logged in to AIM Express in a web browser will have limited abilities.
    Finally, AIM file transfers are on a different port and or internet protocol and this port (and or the Protocol) may not be allowed though your Mac settings in.
    Lets start with the last.
    AIM Logins in version up to and including version 5 are on port 5190 by default using the TCP Protocol.
    We (The regular posters) have been suggesting using port 443 for this for a long time. Now iChat 6 and Messages in Mountain Lion actually use port 443.
    File Transfers on on Port 5190 but use the UDP Protocol.
    It always uses this and this cannot be changed.
    In the Mac Firewall in some versions of the OS UDP traffic can be blocked.
    Check the Advanced Button settings.
    Of course the port has to be opened in the modem (if it routes) or your router.
    In some cases such as the Port Forwarding method you can have models that specify Protocol as well as ports.  Opneing it for 5190 and TCP can block it being opened for 5190 and UDP.
    If you are using UPnP (Or Apple's Port Mapping Protocol) you should not have problems.
    With the second option above you can pull down the Video Menu and open Connection Doctor.
    This will tell you your Capabilities.
    In a Buddy List highlight a Buddy.
    Use the CMD and i keys together (Get Info)
    The Capabilities tab in here will tell you whether the Buddy has the abilities to File Transfer.
    The first option I suggested can only really be checked using a Third Party Jabber app such as Psi
    Basically after you set up an Account  in Psi you can access an option called Service Discovery that iChat (and Messages in Mountain Lion) does not do.
    This will tell you if the server is set up for File Transfers or Group chats plus things called Transports.
    With some servers you will need to (sub) register for the Services you also want to be active.
    Using this method to view Google's GoogleTalk server tells you nothing about the Services they have active.
    As you may have worked out you may need to check out the server's ability if you are using a Jabber servers even if the symptom looks more like reason two.
    12:01 PM      Saturday; December 1, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Not all my Jpeg files from elements moved to Revel, why?

    I went in to check what files from elements were downloaded in the new Revel system and a significant number of my Jpeg pictures did not move over.  Is there a reason?  OMG I hope figuring out which ones weren't moved will be easy like "download whole elements library" or something to that effect.
    I got an email that said my download was complete but on some page somewhere in the MANY places I have been to sort this out  the "all files have been downloaded" was not yet highlighted so does that mean that things are not done yet?
    OMG I am so frustrated.  I am ready to store my pictures on Amazon Cloud.  Seems like a more friendly system.  I am not a tech savy person.  I know enough to be frustrated.

    Jan-
    I'm sorry you are having so much trouble. I will try to answer your questions. First, we have  a lot of FAQ's that you may want to look at that will help you. See these:
    Forum FAQ's:
    forums.adobe.com/community/ps.com_sharing_and_storage/faq
    Forum for Revel users:
    forums.adobe.com/community/revel
    FAQ's about the transition from Photoshop.com to Revel:
    http://www.photoshop.com/misc/membership-faq
    FAQ's about Revel and subscriptions:
    http://www.adobe.com/products/revel/faq.html
    Elements organizer/Revel Help:
    http://helpx.adobe.com/elements-organizer/using/revel.html
    Getting Started with Revel:
    http://www.adobe.com/support/revel/gettingstarted/revel_gs.html
    SHARE
    FAQ: How do I share my photos in Revel?
    http://forums.adobe.com/message/5092831#5092831
    UPLOAD
    FAQ: How do I add (upload) files to Revel?
    http://forums.adobe.com/thread/1162795?tstart=0
    EDIT
    FAQ: How do I edit photos in Revel?
    http://forums.adobe.com/message/5088287#5088287
    MOVING FILES
    FAQ: How do I create libraries and albums, and put my photos into them?
    http://forums.adobe.com/thread/1182585?tstart=0
    QUESTIONS ABOUT FILES TRANSITIONING TO REVEL
    Your album structure will be moved to Revel along with your JPEGs. There is not a concept of albums within albums in Revel, so the file structure will be flattened.
    Will my web galleries be moved to Revel?
    Your web galleries will become albums in Revel. Current album links will continue to work.
    Will my group albums be moved to Revel?
    Group albums will not be moved, but the JPEG photos in the albums will be moved to Revel.
    Take a look at these and let me know what questions remain.
    Pattie

  • Why does file date show 1970 on files transfered to iTunes app window?

    I am finding that files transfered to the apps section in iTunes shows last updated time different from the actual file date on the Mac.
    This is happening for both Numbers, Pages and PDF HD . I just did a file sync of a PDF I created and the date in the iTunes window shows 5/27/70 9:00 am (should have been 6/30/10 12:52 pm, the date that is on the original Mac file). Dates vary between 1970 and 1971. There wasn't even a Mac on those dates!!!
    Only one PDF has the correct date which is the iPad Manual (downloaded from Apple). All the files that have incorrect dates were PDF files created from my applications (Finale, InDesign, and DVDpedia). I have tested other downloaded PDFs from other sources and they all show 1970's dates on them in the iTunes App window.
    This really has no real impact other than being able to determine if the most recently created file is the one on the iPad. Now, I have to delete the current file in the iTunes window and add the file again from the Mac finder to be sure. Not at all a good solution.
    Is this an iTunes bug

    On older computers there was a PRAM battery that would last only so long then needed changing. If the battery went dead then when the computer started it would default to a the dates you have noted.
    iTunes will use the current system date to reflect the 'date added' information.
    http://www.macupgrades.co.uk/store/productinfo.php?productsid=314
    MJ

  • Is there a way to prevent LR from reducing size (pixels) of files transfered to Photoshop as a psd file for editing?

    The subject line says it all.  I have discovered that LR reduces the size of files transferred to Photoshop for further editing when compared to the same RAW file processed in ACR in Photoshop.  For example, a psd file created by LR from a 36 MB RAW file will typically result in a 100 MB psd file.  The same RAW file processed similarly in Photoshop will result in a file around 300 MB.  This makes a huge difference when the files are converted to JPEGs for printing.  The smaller LR psd files result in JPEGs typically under 500 KB where the Photoshop JPEGs are typically around 1.5 MB.   

    Whew!  I didn't think this would turn into such a long discussion!.     OK - my error,  spatial data not color.  But that is loosing focus on my question.  My objective is to get the best print possible from the final JPEG file used for printing..  As previously noted, for a given RAW file w/similar adjustments but with one processed in LR and the other in PS , a print made from the larger of two resulting JPEG files, the larger JPEG file resulting from only  PS ACR processing (i.e., no LR) will result in a better print.  Elie-d appears to have answered my basic question. If LR will always pass a 103 MB file then I assume there is no way to change this size.  In case anyone is interested here is some additional info for consideration.  Both LR & PS using 8 bit mode and 240 ppi..  Procedure in LR: 1) download RAW files from camera CD; 2) make adjustments to photo;  3) using Edit in External Processor, photo transferred to PS in PSD format, 8 bit. 4) file size around 100 MB (103 MB per elie-d).  Procedure in PS:  1) download RAW file to hard drive with Nikon View2; 2) open file in PS - auto opens in ACR; 3) apply essentially the same adjustments (e.g., exposure, highlight, shadow, etc) ) as applied in LR;  4) file opened in PS editor;  5) resulting PSD file size with no further processing (i.e., no layers, etc.) is 310 MB).  The resulting JPEG file created from the LR PSD is typically less than 200 KB whereas the JPEG from the PS PSD will generally be around 1.5 MB.   As an academic question it would still be interesting to know why one gets different size PSD files from LR and PS and what, if any, affect this has on print quality.  As for now I will not use LR to process RAW files.  I prefer the larger PSD & JPEG files I get using just PS            

  • IChat File Transfers fail on 10.7.x Server

    I started this Post over in the iChat FORUM, and it was suggested I post here too: https://discussions.apple.com/thread/3840760
    I have an OS X Server 10.6 setup with iChat and it works perfectly.
    This Mac is connected directly to the WWW, no firewall.
    I have an OS X Server 10.7 setup with iChat and it works perfectly EXCEPT for File Transfers
    This Mac is connected directly to the WWW, with a Netgear FVS336Gv2.
    I have opened all the correct ports for TCP & UDP and mapped them to my OSX Server 10.7 at 192.168.2.100
    I am totally stumped now, why should JUST file transfers do not work?
    This iChat OSX Server 10.7 is setup for people on the same server, using the same domain.
    File Transfer in iChat WORKS on the internal network OK :-)
    File Transfer in iChat DOESN'T WORK on external network :-(
    Here is a screenshot of my routers portforwarding...
    http://www.jrpmedia.co.uk/shared/Remote%20Desktop%20Picture.jpg

    If you are having intermittent or sporadic file transfer problems.. or experiencing only one way file transfers on a local lan:
    Pick One:
    5222 TCP Client authenticates and sends txt messages to the Server on this port.(Apparently TLS if avaialble)
    5223 TCP Client authenticates and sends txt messages to the Server on this port.(Legacy Forced SSL)
    Enable these:
    16402 UDP ClientA communicates with ClientB directly on this port for video chat. (Apparently SIP)
    7777 TCP - Screwy file transfer proxy port.
    From what I can tell about file transfers:
    File transfer proxy.
    ClientA tells Server to tell ClientB that there is a file waiting to be picked up at ClientA on a "randomly" assigned ClientA port.
    ClientB fails to directly connnect to ClientB on this "randomly" chosen port.
    ClientA fails then reverts to proxy mode. KEY STEP
    ClientA sends the file to the Server on this 7777 tcp port.
    Server proxies the file to the ClientB.
    Warning: Having too many directly connectable ports between ClientA and ClientB can cause confusing communcation failures for file transfers between iChat/Messages clients. If one of the clients is able to establish partial communication, it will not properly fail then revert to proxy mode.
    We don't want to open a crap load of ports for file transfer and therefore prefer to have it transfer files via the server proxy port
    Communication flow required to get this to go:
    from clientA to server  5222-5223 (pick one), 7777 for auth and file transfer
    from clientB to server  5222-5223 (pick one), 7777 for auth and file transfer
    from client to client 16402 for video
    The above solved our screwy partially working file transfers... hopefully this helps someone.

  • Problems with File Transfers Over Firewire 800

    Problems with File Transfers Over Firewire 800.
    Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
    Any thoughts...
    Dual 2.7 GHz PowerPC G5
    Mac OSX 10.4.3
    Dual 2.7 GHz PowerPC G5   Mac OS X (10.4.3)  

    Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

  • Problem with Jabber and file transfers WAN - LAN-Users - a solution!

    Hi,
    I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT.
    I had this problem to and found an easy solution:
    My situation
    iChat-Server behind a Netgear ProSafe FireWall. I opened the needed Ports including Port 7777 (the Port for the iChat-proxy (proxy65).
    The iChat-Server is configured to host the domain "server.ourdomain.com" (as an example).
    This address can be reached from the LAN and also from the WAN-side.
    From the LAN-side the DNS redirects to 192.168.1.1, from the WAN this domain redirects to our official IP-address (the WAN-IP of the FireWall).
    I tried nearly all kinds of mentioned solutions, but nothing helped.
    The really easy solution is: I just added our official IP to the "Hosted Domains" in the iChat-section of Server-Admin.
    After that change, the transfers are made via the proxy65 of iChat-Server. The transfers are shown in the log /private/var/jabberd/log/proxy65.log.
    I think, that the other posters who also have this kind of problem are working in a similar setup (domain name of server is used from the LAN AND the WAN-side with different IP-addresses (LAN-IP & WAN-IP).
    This solution will only work, if the WAN-IP is a fixed address.
    svenc

    Until the introduction of file promises in AIR Athena, it  has never been possible to drag remote files out of an AIR application.
    You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
    Hope this is helpful. Please let me know if I could help more.

  • I bought a new computer, and i have transfered everything using home share, file transfers, etc.. yet still when i go to sync, itunes tells me ipod can only be synced with one computer... is there a way to retire the relationship with the old computer?

    i bought a new computer.  the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer?  i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..

    if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
    though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it.

  • How to find out the size of files transferred over the SQL * Net?

    I am trying to test the Advanced Compress (AC) for 11g Data Guard. When the AC is turned on, the archived log files are supposed to be compressed on the primary database server and sent over SQL*Net, then decompressed on the standby db server. We will see the file sizes are the same on both primary and standby servers. I want to verify that the AC works by monitoring how much data are sent over SQL*Net. Per Oracle, AC uses 35% less of the bandwith. That means the size of the files transferred should be at least 65% of the original size.
    Is there a way to find out the size through Oracle utilities? If not, how to find out by OS utilities? OS is Solaris 5.10.
    Thanks.

    I'm not sure this can be done via SQL*Net, but a network packet sniffer between the two servers should be able to help - you might want to contact your network team.
    HTH
    Srini

  • Items In Use for File Transfers

    Whenever I transfer several files at a time (7+ or so), I get the error "The operation cannot be complete because the item "(insert filename here)" is in use."
    I have tried the lsof command in Terminal with no results. This happens with different files (mainly pictures, as I transfer those in large amounts) and from both local drives and card readers or USB drives. The files are usually being moved to a network attached storage that is in the Finder exceptions for indexing. The files aren't always new, so I do not think finder is indexing them. If I click "ok" (and in doing so cancel the transfer) and start it again, it works just fine (until it decides to hit another file and repeats the process).
    It's a very annoying little problem because it forces me to micromanage large file transfers. Any ideas?

    As a workaround consider
    ditto
    Sometimes I get a scrap file in the trash that cannot be deleted for the same reason, although I find no obvious cause. Sometimes it's the mail app and a stray RSS file, but not always. Even then I have to shutdown and restart mail, which is really not acceptable to me.
    Usually a logout/in unhooks it but that's not a solution either.
    You might try transferring the files using a new account with no apps running or even installed other than the defaults.

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • File Transfers in Chat Rooms?

    We're running OS X Server 10.8.3. Is there any known way to have the ability to transfer files inside of a Chat Room? I find it mind-numbing that this isn't possible. We cannot use the chat room feature at all without this. Does anyone know of a way to get it to work or are we stuck now having to look for a third party chat room product?
    thanks,
    Ben

    I'm not sure either of you understood my question. I'll try to make it more clear, in case anyone else has any ideas or feedback that could help:
    We are using Mac OS X Server, 10.8.3. We are using the "Messages Server" service. When using a "persistent chat room" -- one of the supposed features of OS X Server. From http://www.apple.com/osx/server/features/#communication ...
    "Messages Server brings the collaborative power of instant messaging to your organization. Now workgroups can transfer files securely, share group messages, conduct audio conferences, even broadcast a presentation, movie, or photo slideshow to other Messages users running OS X."
    And from the OS X Server product overview PDF, pg. 18...
    Group Collaboration Made Easy
    Messages Server works with OS X to automatically populate users’ buddy lists with
    members of the groups to which they belong, so it’s easy for them to start communicating. And thanks to store-and-forward functionality, Messages Server allows users
    to send messages to buddies who are online, combining the advantages of instant
    messaging and email.
    Messages users can request Messages Server to create and host a persistent chat
    room. Perfect for virtual-team scenarios, project-specific discussions, and real-time,
    blow-by-blow updates, the chat room allows individuals to join at any time, leave
    when they need to—even log out and shut down—and still come back to review
    all communications from the time the chat room opened.
    Here's the problem I'm perplexed by:
    File transfers work just fine when doing 1-to-1 chats. However, in a "Chat Room", they do not work at all.
    I realize that this may be "just how it is" but I was wondering if anyone had any knowledge of a way to make it possible. Seems like a ridiculous limitation, and one that makes the entire (otherwise useful) feature of "persistent chat rooms" all but moot for us.
    thanks,
    Ben

  • Disconnect from WiFi Button in Yosemite (Faster File Transfers via Airdrop)

    Hi all! Just thought I'd share a great new pro-tip I found that's pretty handy.
    Sometimes file transfers through a complex or busy network with a  (think hotel lobby or coffee shop), Airdrop file transfers can run extremely slow vs. it going from computer to computer via no network (Ad Hoc). I was determined to find a work around for disconnecting from a WiFi network without turning off Wifi.
    Anyways, Yosemite introduced a much asked for feature - The disconnect from WiFi button! Just hold down option while you select the WiFi indicator on the menu bar and click disconnect! Your WiFi will continue to be on and it simply won't connect to that network again. If you now search for other computers in AirDrop, it will find them and be a much faster computer to computer connection.

    Testing in a new User will quickly tell you if the problem is system wide or if it's your User's folder that contains the problem.
    CREATE A NEW USER
    Go to System Preferences --> Create a New User in Users & Groups Switch to the New User by logging out/in or use Fast User Switching.
    Enter your Apple ID and password.
    Test Markup in Mail using the iCloud account.
    Continue testing to see what works in the new User.
    Do you still see the issue?
        If yes, then the problem is with your base files.
        If no, then the problem is in your User's folder.
    Finder - my iMac name is - iMacs iMac. All of a sudden it become iMacs iMac (2) and latter iMacs iMac (6). What are these numbers ?
    In System Preferences > Sharing you can see name. When Finder adds a number it indicates it's seeing another drive with the same name. You can select to rename but this could also be an indication of issues at the base level.
    Do you have an external drive that could be used to clone your drive in case you need to do a clean install?

  • File transfers not working

    my file transfers have suddenly stopped working, they start and crap out around a quarter of the way through. the majority of people that im talking to are not on ichat but aim on windows. what can i do, and if i have to delete and re install how do i save my buddy list?

    Hi:
    If you think your iChat problems might be from corrupted ichat preferences files, the "sledge hammer" approach would be to delete the five com.apple.ichat.*.plist files that are in your Home folder's Library folder's Preferences folder. The next time you launch iChat, it will be just like a first-time-ever launch of iChat, so you will need to re-enter all the iChat account information when the iChat startup wizard launches, and your iChat preferences, in particular, remembering things like resetting your iChat > Preferences > Video > Bandwidth to None and stuff like that. Your buddy list is maintained on AIM's servers, not your computer, so it's safe.
    (if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons above)

Maybe you are looking for