Files turn hidden when moving!

Whenever I move a file when holding down the Command key it turns the file Hidden as well when it was not before. For note, I am moving a file from one network drive to another
Can anyone help me to stop this from happening
thanks

This may be something with the settings.
There is a section under general in settings about a lever-ish clicker in the side of the ipad, it may be set to lock the spinning of the screen, the switch is located above the volume control if holding the iPad straight up (home button on bottom). Switch it and if you see a rotation symbol then there is your answer. Flick the switch again and there will be the symbol again with a lock picture in it

Similar Messages

ML Automatically sorts files by name when moving from one folder to another.

Hello, i usually used to move a bunch of files like images or mp3s from one folder to another and in Lion, when moving like 20+ files to another folder, they was being placed where you clicked.
Seems that in ML when i move the same amount of same files, rather than placing them at the cursor, it just moves them and sorts by name. How to avoid this?

Anonymous User,
Links just request pages. Maybe the requested page could run the procedure in a before/after header process.
Scott
P.S. If you like, you can show your name in this forum instead of a numeric ID not only by signing your posts, but also by clicking on 'Forum Settings' and setting 'Name visible to others' to Yes. Unsigned, anonymous posts do not always elicit the most thoughtful or immediate responses from volunteer contributors to the forum.

Vector file turning transparent when placing into ps

Hi,
am hoping someone can help me. I have a vector image that I am trying to place into a PS document. For some reason as soon as I click to accept the placement, the vector image becomes transparent.
It is only happening (thankfully) with this particular file so I am assuming it must be some setting in Illustrator that I am not aware of. I purchased the file from a stock image site. (sadly I am not clever enough to create my own lol).
Any ideas?

hi Manish
thanks for the quick response. Unfortunately, I can't share the file. it would be against the TOS of the stock photo site from where I purchased it.
The only way I can prevent other layers from showing through this particular file is by duplicating it. So I'm guessing that the opacity is somehow being reduced. But no idea why, and when I click on the layer it says it is at full opacity, and normal blending. The ppacity remains at full when in Illustrator, so if I put another image behind this particular file then there is no problem. It is only when moving this file into PS that it becomes see through.
Adding a couple of preview screenshots so you can see what I mean.

Edge Animate file turns black when viewed in Folio, but worked great in adobe content viewer before uploading to folio panel.

What am I doing wrong?
I created simple animations to work in DPS. Basically hot spot button that toggle on and off showing features and benefits. When viewed and tested in adobe content viewer, everything worked great. Now that I am ready to upload the folio as an ipa app. The animations turn black over the image that it is supposed to be on top of.
Any help would be much appreciated.

Thanks Neil, that worked once I'd installed it directly into the Applications folder, not within a subfolder.
So if anyone else has this issue, install the Desktop Viewer app for CC and it works for both CS6 and CC.
NOTE, that you need to double-click the Install Adobe Content Viewer.app file, don't look for a file called Install Adobe Content Viewer.air as per the instructions, as they are out of date.
Phew, I have finally got all my DPS functionality back, and have created a V27 app using V28.

Laptop abruptly turns off when moved

When my laptop is moved from one place to another it abruptly looses power and shuts down completely. The connection between the batterey and unit appears to be fine.

Obvious first place to check is the power cord. Is it seated fully in the slot? If it is, is the cord bad? Try turning on the computer and instead of moving the computer, give the power cord a little nudge without touching or moving the computer. If it happens again, then you have a bad card (or the remote possibility of a bad power in jack on the eMac).
Also, does the keyboard effect this? If you unplug the keyboard and mouse, can you still get it to do this shut off by moving the computer? If not and it only does it when the keyboard is connected is you may have a bad USB cable on the keyboard or mouse which is shorting out the +5V supply and causing the machine to shut off.
Patrick

Why are some of my files now missing when moving from pc to mac when using an external drive

I use an external drive for all my files. I moved to a Mac Mini last week. Now I can not view a majority of my backed up files on My Book external drive.
Any ideas???? Thanks in advance,

See Make a split library portable. A portable library can be stored entirely on an external drive and moved between Mac and Windows computers. iTunes takes a little longer to open the library the first time after each switch. If your drive is currently formatted to NTFS then you will need an additional driver to enable OS X to write to the drive, or simply clone the library to an HFS+ drive.
tt2

Screen turns blue when moving the screen up and down

Hi,
I work on my laptop everyday and I move the screen in diffent angles for me to see the screen better from where I am sitting, but recently the screen turns completely blue. I can still see everything but all the white colors turn light blue.
The laptop is brand new.
Regards,

Hi there @SanneSA
Welcome to the HP Support Forums!
I understand that your notebook display is behaving a bit erratically. Since it is new I would recommend calling in to phone support as you will probably resolve the issue faster. You can reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If you wish to continue here, then i am happy to help, just please post the full product number and operating system for your notebook so I can see what I can find to help. Please read the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
For now you can take a look at these documents that may help sort through the display issue.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
Diagnosing a Liquid Crystal Display (LCD) for Damage
This page is more informational about displays, for your reference.
About LCD Panel Defects and Terminology for HP Pavilion or Compaq Presario Notebook PCs
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Toshiba laptop turns off randomly when moved

Hi,
I have a Toshiba Satelite C655 that randomly turns off when moved. In fact, it will not boot back up unless I remove the battery entirely, hold down the power button for 20 seconds, then put the battery back in. Then it boots up fine.
Like I said, it randomly happens when it's bumped or moved.
Any ideas what this could be? We took everything except the processor out and put it back in to ensure nothing was loose.
This laptop has been very rarely used and is in mint condition besides this one flaw.

I hate random problems. They are the hardest to diagnose and take the longest time to figure out. I agree, it sounds like a loose or intermittent connection. But if you have gone in and reseated all of the connections and made sure that the cables are in straight, etc, it could be a defective connector, cable or component. Again, going to take time and effort to figure out which part or piece when moved or bumped is at fault. Either put in the time and effort to figure it out or consider turning this computer into a 'desktop', where it won't be moved or bumped. Same location always with an external monitor, keyboard and mouse.

IMac 27" inch display screen flicker issue when moving files

Whenever a drop a file from Finder to my desktop, the screen flickers. Occasionally, when I move a window, it also flickers, but it's a more consistent problem when dropping the files on the desktop. It only flickers once and returns to a completely normal state.
It does NOT happen when going the other way - from the desktop to Finder.
I purchased the iMac AFTER the original firmware updates, so I haven't had to install any of them from the original problem a couple years ago.
I am wondering if this is a problem that is discussed or if there are any suggestions.
Thanks....

I'm having the same problem. Here are the details I was about to post as a separate thread:
27" iMac 2.7GHz Intel Core i5 with 16Gb RAM. I'm also using a 20" ACD alongside, a set up I have used with my previous 24" iMac. The ACD is being used as an extended desktop (not mirrored).
I've just started noticing an odd effect: When moving a file from a folder onto the desktop, the entire iMac screen flickers and breaks up momentarily before reverting to normal. It is an effect which lasts a fraction of a second and is visually very intrusive.
Weirdly, if I move the file but continue to hold it for a second before releasing to place it on the desktop, there is no flicker.
Similarly, if I open another folder and place the window alongside, moving a file from window to window produces no flicker. It only happens when moving something to the desktop.
The effect does not happen if the ACD is turned off (but connected) or the ACD is used in Mirror mode.
Does this sound like a hardware or software fault?

Authenication needed when moving or saving files to a folder

I've been online searching but can't find a resolution to disabling having to authenticate when moving or saving files to any folder.
I read something about using Terminal and tried the suggestion which was typing in
sudo chawn -R yourshortname . Then putting in my password when prompted. It either will not type my password or not accept it.
Can anyone help? Thanks

You can't disable or correct it with that command. See http://discussions.apple.com/thread.jspa?threadID=1216618 for more information.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to keep links from being broken when moved or file is later split

Which is the best way to make sure that a link to another pdf file is not broken when a file is emailed or moved to a new location off of the server? Should you link a destination or use the hyperlink feature?
If the links are created and the file then has to be split, will the links be retained in the split files?

PDF moved —
PDF#1 has a link to PDF#2. To keep this link functional after putting PDF#1 elsewhere:
--| Relocate PDF#2 with PDF#1; maintaining the same path to the target of the link (which is PDF#2).
--| Or, use Acroat's link tool to modify the link in PDF#1 so that you establish a functional path to wherever PDF#2 is at.
For email, if PDF#1 & PDF#2 are adjacent to one another under some folder/directory & then linked you'd want to email both files together. Both PDFs can be saved &, provided they stay adjacent, the links will work.
PDF split —
PDF#3 has internal links (e.g., a link from PDF page 1 to some other PDF page in PDF#3).
You split PDF#3 by extracting the first 5 PDF pages & now have PDF#4.
Any links in PDF#4, to PDF#3 pages past page 5 will not function.
Use Acrobat's Link tool to modify the link such that it goes from PDF#4 to the desired page in PDF#4.
n.b., There are 3rd party plug-ins for Acrobat that can facilitate bookmark and link management.
A web search will provide a listing.
Be well...

Dreamweaver 8 - not updating links when moving files

I am still having problems getting Dreamweaver 8 to work the
same way as my Dreamweaver MX2004. When I use the file panel in
Dreamweaver 8 to change the name of a file it does not update my
links throughout out site. I have gone to EDIT > PREFERENCE and
made sure that update links when moving files and the Prompt box is
checked.
I have also tried Site > Advanced > Recreate Site Cache
but it's not working.
Can anyone please help. Thank you.

Give me the code from a link that is not managed by DW,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Rockysowner" <[email protected]> wrote in
message
news:e2eoj3$idn$[email protected]..
>I am still having problems getting Dreamweaver 8 to work
the same way as my
> Dreamweaver MX2004. When I use the file panel in
Dreamweaver 8 to change
> the
> name of a file it does not update my links throughout
out site. I have
> gone to
> EDIT > PREFERENCE and made sure that update links
when moving files and
> the
> Prompt box is checked.
> I have also tried Site > Advanced > Recreate Site
Cache but it's not
> working.
>
>
> Can anyone please help. Thank you.
>

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Files turn hidden when moving!

Similar Messages

Maybe you are looking for