Files with .a extension using ftp transport

Hi.
Am using ftp adapter in osb to read .txt files(e.g. abcd.txt) from ftp location, process the body/text() in OSB and then place the incoming file to an outbound folder.
the flow is like ftp-> Proxy Service->Business Service->outbound ftp
the service works fine where then is less load or the no. of incoming files is less.
However,sometimes the outbound folder contains the files with .a extension at the end.(e.g. abcd.txt.a)
Can someone tell me the rootcause of these .a file creation and the scenarios in which the .a files are created.
Also,please tell me what are these .a files meant for?
How,can I eliminate this while configuring the services using ftp transport.
Thanks in adavance

I had this recently with a variety of FTP servers, FileZilla, Microsoft etc.
For me, it happened when the file already exists in the destination and I was expecting the destination file to be overwritten. My application would generate the same filename, say FileA.txt and expect that to be overwritten, but with OSB 10gR3 I would get files with .a stuck on the end.
This functionality changed between ALSB and OSB and I had a patch developed to restore the ALSB functionality.
I spent ages looking at it, and debugging FTP commands and going from memory, I'm pretty certain that the FTP adapter doesn't implement the correct FTP spec for the RNFR command according to the RFC in the case where a file already exists - it doesn't handle overwrite.
Hope that may help.
Pete

Similar Messages

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

Posting a File with Date Time using FTP in a BPM scenario

Hi All,
I have got a following requirement within the BPM ::-
Step 1: We receive a file from an external system using FTPS with File Content Conversion Mode. The file is a comma separated file.
Step 2 : We need to write the same file without any changes in data elements to another File System. The file to be written will be comma separated.
Step 3 : The data will be mapped to an RFC and there will be a RFC Call to the ECC system.
Step 4 : On successful call to RFC, the file will be dumped into the SAP File system also.
The issue here is in Step 2. The additional requirement for Step 2 is to name the file with the following convention -
ABCDEF_<Date in MMDDYYYY>_<Time in HHMMSS>_<Time in ms>_data.txt
Can you help me on how to configure this from within the BPM ? I have seen blogs and replies in forum on using UDF's for the same. I am not sure on how to do this in BPM.
Please help !!!
Thanks,
Amit

Hi,
I dont think you required BPM in this case,you can achieve this requirement using Multi mapping.
3 Receive comunication channels
1)to send file to receive File directory9Content conversion required)
2)RFC Receiver Communication channel to make a cal to SAP ECC to send RFC..
3)One more File communication channel to send data to SAP File System.
refer below blog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regarding r file name use dynam ic configuration UDF or ASMA to chnage file name format to your desired format,if you decided to use UDF then map root nod of receiver file structure in multimapping.
Regards,
Raj

[SOLVED]Can't save a file with tex extension using vim

Hello there people,i decided to learn LATEX but vi won't let me save my files with the tex extension.It says:
"test.tex" E212: Can't open file for writing
Does anyone know why vim is denying to save it with this extension?Please help!
Last edited by sepuku (2011-06-04 01:21:44)

I just noticed that when i'm in /home/sepuku i'm able to save the files normally.But i created a directory specially for latex!
So when i cd /home/sepuku/latexprojects i can't save anything.I think that this has something to do with the permissions maybe?And how to i make my user able to copy/paste/remove /edit/create files and dirs? :S
ls -al test.tex returns:
-rw-r--r-- 1 sepuku users 70 Jun 4 06:01 test.tex

SSIS 2008 - Sending file with dynamic name using FTP task

Hi - Thanks for taking a look - (I'm very new to SSIS.)
I'm trying to create an SSIS 2008 package that does the following:
1) Execute a stored procedure on SQL.
2) Download the results as a CSV file to a 'local' location. The file name is set using a variable ("User::LocalFilePath") dynamically based on the current time:
@[User::LocalFilePath] + "GreatReportName_" + "_" +(DT_STR,4,1252) DatePart("yyyy",getdate()) + Right("0" + (DT_STR,4,1252) DatePart("m",getdate()),2) + "_" + Right("0"
+ (DT_STR,4,1252) DatePart("d",getdate()),2) + "_" + Right("0" + (DT_STR,4,1252) DatePart("hh",getdate()),2) + "_" + Right("0" + (DT_STR,4,1252) DatePart("mi",getdate()),2)
+ "_" + Right("0" + (DT_STR,4,1252) DatePart("ss",getdate()),2) + ".csv"
3) Transfer the CSV file to an FTP site.
4) Delete the CSV file from the 'local' location.
I've been able to do steps 1 and 2 so far. However when trying the move the newly created file to the FTP site I get the error:
"Error: 0xC002917C at Send to FTP, FTP Task: The variable "User::LocalFilePath" doesn't contain file path(s)."
(When I set the "IsLocalPathVariable" to "False" and use a file previously created the file is correctly transferred to the FTP site. This proves that the FTP details are correct and that the "RemotePathVariabe" is working
correctly.)
I have set the variable ("User::LocalFilePath") to "EvaluateAsExpression" in the variable properties.
Can anyone help?
Many Thanks,
UnoT

Hi Vaibhav,
Thanks for your response. I set the "DelayValidation" to "True". However
that didn't make any difference.
I added in all the breakpoints, but it didn't give any results (I may be doing this incorrectly?):
Any other suggestions?
Thanks,
UnoT

HT204382 how do i make a voice file with mp3 extension using my imac?

I tried using Quicktime and picking audio file and using the microphone and burning the voice file but my cd player that i need to use only plays mp3 files and the files that are burned are only mp4. please help

ITunes will convert to mp3

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

Files with .ejb extension

Hi,
I am using the <javadoc> task in an Ant build file. I have several EJB files with th extension .ejb that I want to have included in my javadocs.
I have the following code:
<target name="javadoc" description="Build Java Documentation">
 <javadoc destdir="${doc.dir}">
 <fileset dir="src">
 <include name="**/*.ejb" />
 </fileset>
 </javadoc>
</target>However, when I run this I get the following error:
[javadoc] javadoc: Illegal package name: "C:\src\com\test\ejb\CommandInputEJB.ejb"I do need the .ejb file extension for another tool to work (Ejbgen). Is there a way to get this working?
Thanks in advance for any help!
Arjan Huijzer

Hi Arjun
I'm still learning all of this myself with Ant, but looking at your script, it does not appear to be complete. I understand that you need to have certain tags included. The Ant task documentation gives good information, but in brief, in the list of parameters, the required options are indicated. Your script as a minimum, must include either 'sourcepath', 'sourcepatheref', or 'sourcefiles' and you then must include '<d>destdir' (which you already use).
You can find the documentation here:
http://ant.apache.org/manual/CoreTasks/javadoc.html
I have never included external files such as the EJB ones you are using, but I have written my own script for generating JavaDoc HTML output. Feel free to use it if it helps.
It uses an external file for the package list (sourcepath), called from the property:
 <property name="JDOCSOURCELIST" value="JDOCSourceList.properties" /> 
This is the same as the -sourcepath option of the standard JavaDoc docelt. It is formatted:
<code>
com.supersaus.server
com.supersaus.server.factories
\\\\S5\\Documentation\\com\\supersaus\\common\\Association.java
\\\\S5\\Documentation\\com\\supersaus\\common\\CData.java
</code>
Other properties used in the script are:
<code>
<property name="JDOCDIRECTORY" value="JavaDocOutput" />
<property name="SOURCECODEROOT" value="\\\\S5\\Documentation" />
<property name="STYLESHEET" value="./stylesheet.css" />
<property name="BOTTOM" value="Supersaus 2004" />
<property name="DOCTITLE" value="Supersaus Common Files" />
<property name="LINK" value="http://java.sun.com/j2se/1.4.2/docs/api" />
<property name="OVERVIEW" value="doc-files\\Saus_Overview.htm" />
</code>
The main ant target is built up as follows:
<code>

<target name="BuildJavaDoc">
<splash/> 
<echo message="Please wait whilst the document is generated into the folder ${JDOCDIRECTORY}" />
 
 <javadoc destdir="${JDOCDIRECTORY}"
 sourcePath="${SOURCECODEROOT}"
 packageList="${JDOCSOURCELIST}"
 maxmemory="180M"
 stylesheetfile="${STYLESHEET}"
 bottom="${BOTTOM}"
 Doctitle="${DOCTITLE}"
 Windowtitle="${DOCTITLE}"
 Overview="${OVERVIEW}" >
 <Link href="${LINK}"/>
 </javadoc>
</target>
</code>
Hope all this helps?
Best wishes and good luck
Supersaus

How to output a postscript file with .ps extension name in jsp?

Hi,
I could use a servlet to output a postscript file with .ps file extension name. But I tried to do the same with jsp, for some reason, jsp always outputs a file with .jsp extension name though the content is postscript. Could anyone help me on this? Here is my jsp code:
<%@page contentType="application/postscript"%>
<%@page pageEncoding="UTF-8"%>
<%@page import="java.util.*" %>
<%@page import="java.io.*" %>
<jsp:useBean id="corresv" class="oiintranet.CorresVBean" scope="request"/>
<%
response.setContentType("application/postscript");
String corresId = request.getParameter("Id");
corresv.setCorresId(corresId);
PrintWriter output = response.getWriter();
output = corresv.getResult(output);
output.flush();
%>
In the bean corresv:
public class CorresVBean extends BaseBean {
private String corresId;
public void setCorresId(String s) {
this.corresId = s;
public PrintWriter getResult(PrintWriter output) {
//get postscript file content from a socket, one string line each time until reaches "X_END"
String str;
while ((str = in.readLine()) != null) {
if (str.equals("X_END")) break;
output.println (str);
output.close();
}catch(Exception e) {
e.printStackTrace();
return output;
Thank you in advance.
Geraldine

Hi
Every time u want to make a file u need to make its extension. I am talking
about general scenario like word, excel so even when u make spool file
so u need to give extension.
like
Spool temp.sql
it will save u r file as sql file.
hope it will help
regards

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Display jsp files with .html extension

my problem is very straight forward i want all my jsp pages to be shown with .html extension. like if i have a page test.jsp and I access it through a hyperlink Test then in the browser's address bar i want it test.html .. any ideas ..

That's is one odd request. The source for the page still shows that they're loading a .jsp file. To do what you want, you'd have to write javascript for every such link that handled that type of request.
However, if you actually want all files with .html extensions to be processed like jsps you can:
1. you can remap the JSP servlet in your web.xml file to another extension (though i'm not sure if thats part of the spec)
2. you can also use the <jsp-property-group> element in web.xml to specify other files as JSPs. (thats definitely in the spec)

Search and find jpg files with uppercase extension

Macbook pro 13 inch retina display with OS X Yosemite.
Some of the images I'm working on are being saved with all uppercase extension .JPG.
My questions is:
1) Does anyone know why this is happening?
2) Is there a way to search all the files that have the uppercase extension .JPG?
3) How could I change all the files with uppercase extension .JPG either individually or batch all the files automatically?
4) Is there a way to have my files saved with the normal lowercase .jpg extension for future files?
Thank you.

Which program are you using to edit your jpeg images?
On a normal Mac with HFS Journaled disk format, there is not any difference with upper case or lower case file names - only if you have formatted the disk as a "HFS Journaled Case Sensitive" can you have two files that differ only in case. For example on a disk with normal formatting, if you had a file called abc.jpg you could not create another file called abc.JPG (you will get an error if you try), but on a disk that was formatted as HFS Journaled Case Sensitive you could have both files.
So in your case the upper case files would be opened if you typed in the lower or upper case name.
Do you have a few files with this upper case issue or lots?
If you have only a few just rename them in Finder (Yosemite Finder now has a nice rename feature) - just highlight all the files you want to rename then right-click or control-click and select the item in the options dialog that appears named "Rename xx items" where xx is the number of items you had highlighted.
If you have a lot let me know and will tell you a different way that is easier but involves using the command line in Terminal.
Is it possible you accidentally had the caps lock key pressed when you typed in a name? In any event it doesn't really matter how they got the upper case name, simply changing the names to lower case should fix the problem so that it doesn't happen again.

Trying to convert video files with an extension of IDI_DVD to digital files itunes and imovies can read can someone help me

Can someone please tell me how I can convert video files with an extension of IDI_DVD to a file itunes and imovie can read? Thanks.

Thanks for the reply, The files are on a DVD disk. I coverted my family VHS tapes to digital dvds using an HP Media Centre PC five or more years ago cant remember the program but if I get info on the disk ,on the Mac it tells me the extension is IDI_DVD.

How can u open a file with .exe extension after it was unpacked?

Thank you Linc Davis for THE ARCHIVER, I was able to unpacked the program. However, after it was unpacked, I clicked the file wtih .exe extension and I got a message that this file will not be extract with this program. Is there another way to open file with .exe extension after it was unpacked by THE ARCHIVER...??? Any assistance is highly appreciated.

.exe files are Windows executables and do not run in OS X. You would have to install Windows to use it.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Reading & Writing files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR

Hi Folks,
How to read & write files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR.
Please let me tell if anybody knows asap.
Thanks & Regards,
Anderson

Thanks Jon,
But, I know how to read the file if we give exact file path
I need to get the path and read file(s) with same extension files in the same folder using adobe air, not single file.
Don't have file path even, i have folder path, in that somany files are there. So i need to get which are the same extension(Ex: ".txt", ".sas") files
If you have any idea , please help me out
Regards,
Vijay.

Files with .a extension using ftp transport

Similar Messages

Maybe you are looking for