Files with extension .sbc

i recently started using vodafone email to listen to the messages but i receive them in files with extension.sbc
any software to open those files and listen to my messages???

Check [this page|http://www.neowin.net/forum/lofiversion/index.php/t540796.html] Doesn't look promising. Proprietary technology so if the main company doesn't support Macs then you're probably out of luck.

Similar Messages

HT204382 Hello, which one should I download to be able to view a file with extension .avi ? Thanks.

Hello, which one should I download to be able to view a file with extension .avi ? Thanks.

Try Perian.
(68748)

What adobe app can decode files with extensions bup, ifo, vob?

What adobe app can decode files with extensions bup, ifo, vob?

>bup, ifo
Nothing... those are part of the file structure of a DVD
>vob
This is the actual video on a DVD... so Premiere Elements or Premiere Pro

Elements 7: Unable to view or edit files with extension cr2

Had to reload elements 7 after disk crash. Restored from backups. Unable to view or edit files with extension cr2

Unable to view or edit files with extension cr2
Which Canon camera model? Elements 7 is probably just too old to use the required Camera Raw plugin for your camera.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Camera Raw (the plugin used to read Raw files) is constantly updated to support new cameras as they come on to the market.

When a file with extension .htm as a product from Epilex is opened, there was a notify a screen, "This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer"

My company has decided to use Epiplex software.
But when a file with extension .htm as a product from Epilex is opened, there was a notify a screen,
"This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer".
I prefer to use Mozilla than Internet Explorer. Would u please handle Mozilla browser along this problem to be available in this matter?

This might be simple but it works well for me.
1.
Right click on the tool bar in IE8 and uncheck adobe PDF to disable. Click yes when it ask if you are sure.
2.
Open Adobe
READER located in the start menu.
3.
Click on Edit and then on Preferences.
4.
Select the "General" category.
5.
Click on "Select default PDF handler"
6.
Adobe Reader should be already selected. Change it to reader if it is not.
7.
Click on "Apply" and except changes.
8.
Restart the computer and you are done.
Now you can open and save PDF's from IE8. Once you save it, you can right click and "open with" Acrobat if you choose.
Be careful to not make Acrobat the default or you have to start over.
You can still create PDF's from docs, scans, and picture like before. You might think this is a work around but it really isn't.
Some forms that are available on the internet can't be opened by Acrobat for security reasons.
Good luck! P.S. I am not an IT tech but I play one on TV.

Photoshop wont let me save files with Extensions...

Photoshop isn't letting me save my files with extensions any more. It's only saving files as copy's and I have to add the extensions manually. This happened around the time I updated to OSX maverics, and is driving me crazy as it is extremely time consuming. I'm using CS5 version. Please Help!!

Thankyou! That worked to fix the file extensions part of the problem. I had somehow changed it to "never "instead of "always".
I'm still having the error message problem that photoshop is forcing me to save the file as a copy though. See the attached photo for the error message I'm receiving.
Do you know how to fix this? So that I can save work to the original image?

Preview program stoped to open files with extension .JPG

When open the files with the extension ".jpg" Preview program opens a gray window and everything, but in the information window shows the photo. In what could be the problem?

anything that is intermittent - and thus, non-reproducable - is a nightmare to troubleshoot and fix. From what little evidence there is, I would almost think of some third factor - other software? - that may be in play. maybe someone with more expertise can help...
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " OS X Yosemite " where it may get a more rapid response from your fellow users.
ÇÇÇ

Original application file with extension .flc not opening

hi,
I have got an requirement from my end user for DMS. He operates a software named FLOW LOGIC CONTROL, from there he generates a document with extension .flc.
I am able to check in the docuemnt in DIR, but when I try to access the same through DIR, it does not open.
I have defined work station application as FLC with file format as .flc and application (path and programme name) as %AUTO% for Define work station application in network in customizing.
Do I need to define application other then %AUTO% ? If so what it will be?
I have tried to open same file through DIR on the desktop where the software is running, but there also I could not open original application file.
Kindly help me resolving the issue.
Thanks and Regards,
Niraj Sikligar

Hi NIraj
The filed which I mentioned to You mentions the Path of the application which is used to display or change the Original Alpplication file.
example.
If you want to change or display Word document that you have checked in the content server, when you say display the system find the path where this Program ( eg. WINWORD.Exe ) .
eg Path C:\Program Files\Microsoft Office\OFFICE11\WINWORD.exe
Check in your PC this Path.Whenever you open a word document it uses this path for winword.exe to process word document.
So in your case the program may be installed in your PC or on some anather Computer.If its on your local machine the Mention * %AUTO%
If 2D or 3D Document mention it as suggested earlier reply.( I Think in your case a Engineering document is getting generated.And it must be 2D or 3D doucment. ).
If your program in on anather machine then give path name of that program.
Please press F1 in the field * Path with program Name * to check the help for possible entries.This will help you to solve the problem.
Hope this helps you
With regards
Mangesh Pande

HT4769 How to open a FULL HD video file with extension .mpeg2 in Final Cut Pro X ?

I would like to know How to Import or Open a Video FULL HD in Final Cut Pro X or Final Cut Pro 7.0.3 . . . I only can Open a HD video but not a FULL HD.
May need some codec ??? May some setup . . .
Whithout info , I have to RECODE a file to downgrade resolution . . . using a software like a Hand Brake to CONVERT to another extension like .mov, m4p, mkv, etc . . .
Same problem occur with a " iMovie " software comming with OS Lion . . .
So, why ?
Double work . . . double file occupied in hard drive . . . lost time !
Someone can Help Me ?
Thanks,
jbgodoy

@daguerratype
The Spatial Conform is one of the things I tried. Unfortunately none of its settings fixed the aspect ratio. When I choose "Fit", it simply shows it as 4:3 and leaves left and right black borders on a 16:9 timeline. When I choose "Fill", it zooms the 4:3 video and chops off the top and bottom parts.
@Thomas Emmerich
This is a decent workaround. Fortunately my clips are named in such a way that I can easily drop them all in the timeline and do a Command-F (Find) to search by clip name, highlight all of them in the search results, then use the Inspector to modify the properties of all the clips at once. I have to change X-scale to 133% and Spatial Conform to "Fit", and now at least it fits the 16:9 timeline properly.
Thanks to both replies. I still hope Apple adds a way to fix the clip in the Event browser so that I don't have to do this workaround.

Javadoc out of files with extensions jpd/jws/ejb/jcx

Hi,
I see lot of messages on this newsgroup for javadoc help (unfortunately without any reply with solution except temporarily changing extension to .java).
I am facing the same problem of creating javadoc out of jpd/jws/ejb/jcx or .work file itself.
Can anyone please guide me?
regards,
-Ranjan

What do you mean "just like a java file"? Does it contain class, constructor, method and field declarations? Javadoc comments are interpreted only ahead of these declarations.
The javadoc tool is limited to java source files. It's pretty much a precondition of the javadoc tool that a source file must be able to be compiled by the javac compiler. Javadoc uses parts of javac to parse the source file and build a doc structure, using javac internal data structures. If your files cannot be compiled by javac, they are unlikely to be parsed by the javadoc tool (though there are exceptions for Java source files that have compiler errors). Javadoc tool also looks for the ".java" extension on files.

Open file with extension is .Z

I need open file xxxx.Z for read its content.
I looker for in java.uitl.zip and classes Zip and GZIP aren't useful.

as jholdstock reply has error,I already correct this problem.
in my job,I don't want to uncompress file ,but I'want to read this data file so I also add
method readLine() to this class .
* @(#)UncompressInputStream.java 0.3-2 18/06/1999
* This file is part of the HTTPClient package
* Copyright (C) 1996-1999 Ronald Tschal?r
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free
* Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307, USA
* For questions, suggestions, bug-reports, enhancement-requests etc.
* I may be contacted at:
* [email protected]
* correct something and add readLine() by [email protected]
//package HTTPClient;
import java.io.IOException;
import java.io.EOFException;
import java.io.InputStream;
import java.io.FileInputStream;
import java.io.FilterInputStream;
* This class decompresses an input stream containing data compressed with
* the unix "compress" utility (LZC, a LZW variant). This code is based
* heavily on the <var>unlzw.c</var> code in <var>gzip-1.2.4</var> (written
* by Peter Jannesen) and the original compress code.
* @version 0.3-2 18/06/1999
* @author Ronald Tschal?r
public class UncompressInputStream extends FilterInputStream {
* @param is the input stream to decompress
* @exception IOException if the header is malformed
public UncompressInputStream(InputStream is) throws IOException{
     super(is);
     parse_header();
byte[] one = new byte[1];
public synchronized int read() throws IOException{
     int b = in.read(one, 0, 1);
     if (b == 1) return (one[0] & 0xff);
     else return -1;
// string table stuff
private static final int TBL_CLEAR = 0x100;
private static final int TBL_FIRST = TBL_CLEAR + 1;
private int[] tab_prefix;
private byte[] tab_suffix;
private int[] zeros = new int[256];
private byte[] stack;
// various state
private boolean block_mode;
private int n_bits;
private int maxbits;
private int maxmaxcode;
private int maxcode;
private int bitmask;
private int oldcode;
private byte finchar;
private int stackp;
private int free_ent;
// input buffer
private byte[] data = new byte[10000];
private int bit_pos = 0, end = 0, got = 0;
private boolean eof = false;
private static final int EXTRA = 64;
public synchronized int read(byte[] buf, int off, int len) throws IOException {
     if (eof) return -1;
     int start = off;
     /* Using local copies of various variables speeds things up by as much as 30% ! */
     int[] l_tab_prefix = tab_prefix;
     byte[] l_tab_suffix = tab_suffix;
     byte[] l_stack = stack;
     int l_n_bits = n_bits;
     int l_maxcode = maxcode;
     int l_maxmaxcode = maxmaxcode;
     int l_bitmask = bitmask;
     int l_oldcode = oldcode;
     byte l_finchar = finchar;
     int l_stackp = stackp;
     int l_free_ent = free_ent;
     byte[] l_data = data;
     int l_bit_pos = bit_pos;
     // empty stack if stuff still left
     int s_size = l_stack.length - l_stackp;
     if (s_size > 0){
          int num = (s_size >= len) ? len : s_size ;
          System.arraycopy(l_stack, l_stackp, buf, off, num);
          off += num;
          len -= num;
          l_stackp += num;
          }//if (s_size > 0)
     if (len == 0){
          stackp = l_stackp;
          return off-start;
          }//if (len == 0)
// loop, filling local buffer until enough data has been decompressed
     main_loop: do{
          if (end < EXTRA) fill();
          int bit_in = (got > 0) ? (end - end%l_n_bits)<<3 : (end<<3)-(l_n_bits-1);
          while (l_bit_pos < bit_in){
          // check for code-width expansion
               if (l_free_ent > l_maxcode){
                    int n_bytes = l_n_bits << 3;
                    l_bit_pos = (l_bit_pos-1) +
                    n_bytes - (l_bit_pos-1+n_bytes) % n_bytes;
                    l_n_bits++;
                    l_maxcode = (l_n_bits==maxbits) ? l_maxmaxcode : (1<<l_n_bits) - 1;
                    if (debug) System.err.println("Code-width expanded to " + l_n_bits);
                    l_bitmask = (1<<l_n_bits)-1;
                    l_bit_pos = resetbuf(l_bit_pos);
                    continue main_loop;
                    }//if (l_free_ent > l_maxcode)
               // read next code
               int pos = l_bit_pos>>3;
               int code = (((l_data[pos]&0xFF) | ((l_data[pos+1]&0xFF)<<8) | ((l_data[pos+2]&0xFF)<<16)) >> (l_bit_pos & 0x7)) & l_bitmask;
               l_bit_pos += l_n_bits;
               // handle first iteration
               if (l_oldcode == -1){
                    if (code >= 256){ throw new IOException("corrupt input: " + code + " > 255"); }
                    l_finchar = (byte) (l_oldcode = code);
                    buf[off++] = l_finchar;
                    len--;
                    continue;
                    }//if (l_oldcode == -1)
               // handle CLEAR code
               if (code == TBL_CLEAR && block_mode){
                    System.arraycopy(zeros, 0, l_tab_prefix, 0, zeros.length);
                    l_free_ent = TBL_FIRST - 1;
                    int n_bytes = l_n_bits << 3;
                    l_bit_pos = (l_bit_pos-1) +
                    n_bytes - (l_bit_pos-1+n_bytes) % n_bytes;
                    l_n_bits = INIT_BITS;
                    l_maxcode = (1 << l_n_bits) - 1;
                    l_bitmask = l_maxcode;
                    if (debug) System.err.println("Code tables reset");
                    l_bit_pos = resetbuf(l_bit_pos);
                    continue main_loop;
                    }//if (code == TBL_CLEAR && block_mode)
               // setup
               int incode = code;
               l_stackp = l_stack.length;
               // Handle KwK case
               if (code >= l_free_ent){
                    if (code > l_free_ent) throw new IOException("corrupt input: code=" + code + ", free_ent=" + l_free_ent);
                    l_stack[ --l_stackp ] = l_finchar;
                    code = l_oldcode;
                    }//if (code >= l_free_ent)
               // Generate output characters in reverse order
               while (code >= 256){
                         l_stack[--l_stackp] = l_tab_suffix;//xxxx
                         code = l_tab_prefix;
                         }//while(code >= 256 )
               l_finchar = l_tab_suffix;
               buf[off++] = l_finchar;
               len--;          // And put them out in forward order
               s_size = l_stack.length - l_stackp;
               int num = (s_size >= len) ? len : s_size ;
               System.arraycopy(l_stack, l_stackp, buf, off, num);
               off += num;
               len -= num;
               l_stackp += num;     // generate new entry in table
               if (l_free_ent < l_maxmaxcode){
                    l_tab_prefix[l_free_ent] = l_oldcode;
                    l_tab_suffix[l_free_ent] = l_finchar;
                    l_free_ent++;
                    }//if(l_free_ent < l_maxmaxcode)          // Remember previous code
               l_oldcode = incode;          // if output buffer full, then return
               if (len == 0){
                    n_bits   = l_n_bits;
                    maxcode = l_maxcode;
                    bitmask = l_bitmask;
                    oldcode = l_oldcode;
                    finchar = l_finchar;
                    stackp   = l_stackp;
                    free_ent = l_free_ent;
                    bit_pos = l_bit_pos;
                    return off-start;
                    }//if(len == 0 )
               }//while (l_bit_pos < bit_in)
               l_bit_pos = resetbuf(l_bit_pos);
          } //main_loop: do
     while (got > 0);
     n_bits   = l_n_bits;
     maxcode = l_maxcode;
     bitmask = l_bitmask;
     oldcode = l_oldcode;
     finchar = l_finchar;
     stackp   = l_stackp;
     free_ent = l_free_ent;
     bit_pos = l_bit_pos;
     eof = true;
     return off-start;
     /**     * Moves the unread data in the buffer to the beginning and resets     * the pointers.     */
     private final int resetbuf(int bit_pos)    {
          int pos = bit_pos >> 3;
          System.arraycopy(data, pos, data, 0, end-pos);     end -= pos;     return 0;
     private final void fill() throws IOException    {
          got = in.read(data, end, data.length-1-end);
          if (got > 0) end += got;
     public synchronized long skip(long num) throws IOException    {
          byte[] tmp = new byte[(int) num];
          int got = read(tmp, 0, (int) num);
          if (got > 0) return (long) got;
          else         return 0L;
     public synchronized int available() throws IOException    {
          if (eof) return 0;
          return in.available();
     private static final int LZW_MAGIC = 0x1f9d;
     private static final int MAX_BITS = 16;
     private static final int INIT_BITS          = 9;
     private static final int HDR_MAXBITS      = 0x1f;
     private static final int HDR_EXTENDED     = 0x20;
     private static final int HDR_FREE          = 0x40;
     private static final int HDR_BLOCK_MODE     = 0x80;
     private void parse_header() throws IOException    {
          // read in and check magic number
          int t = in.read();
          if (t < 0) throw new EOFException("Failed to read magic number");
          int magic = (t & 0xff) << 8;
          t = in.read();
          if (t < 0) throw new EOFException("Failed to read magic number");
          magic += t & 0xff;
          if (magic != LZW_MAGIC)     throw new IOException("Input not in compress format (read " + "magic number 0x" + Integer.toHexString(magic) + ")");     // read in header byte
          int header = in.read();     if (header < 0) throw new EOFException("Failed to read header");
          block_mode = (header & HDR_BLOCK_MODE) > 0;
          maxbits    = header & HDR_MAXBITS;
          if (maxbits > MAX_BITS)         throw new IOException("Stream compressed with " + maxbits + " bits, but can only handle " + MAX_BITS + " bits");
          if ((header & HDR_EXTENDED) > 0)         throw new IOException("Header extension bit set");
          if ((header & HDR_FREE) > 0)         throw new IOException("Header bit 6 set");
          if (debug)     {         System.err.println("block mode: " + block_mode);         System.err.println("max bits:   " + maxbits);     }
          // initialize stuff
          maxmaxcode = 1 << maxbits;
          n_bits     = INIT_BITS;
          maxcode    = (1 << n_bits) - 1;
          bitmask    = maxcode;     oldcode    = -1;
          finchar    = 0;
          free_ent   = block_mode ? TBL_FIRST : 256;
          tab_prefix = new int[1 << maxbits];
          tab_suffix = new byte[1 << maxbits];
          stack      = new byte[1 << maxbits];
          stackp     = stack.length;
          for (int idx=255; idx>=0; idx--)         tab_suffix[idx] = (byte) idx;
          }//private void parse_header() throws IOException
     public String current_str="";
     public String buf_str="";
     public int start_pos=0;
     public String readLine() throws IOException {
          int find_pos=current_str.indexOf("\n",start_pos);
          while( find_pos < 0 ){
               byte[] buf = new byte[1000];
               buf_str=current_str.substring(start_pos);
               start_pos=0;
               int got=0;
               got=read(buf);
               if(got < 0) { return null; }
               current_str=buf_str + new String(buf,0,got);
               find_pos=current_str.indexOf("\n",start_pos);
               }//while
          find_pos=current_str.indexOf("\n",start_pos);
          String ret_str=current_str.substring(start_pos,find_pos);
          start_pos=find_pos+1;
          return ret_str;
     private static final boolean debug = false;
     public static void main (String args[]) throws Exception    {
          if (args.length != 1)     {         System.err.println("Usage: UncompressInputStream <file>");         System.exit(1);     }
          //InputStream in = new UncompressInputStream(new FileInputStream(args[0]));
          UncompressInputStream in = null ;
          try { in = new UncompressInputStream(new FileInputStream(args[0])); }
          catch ( Exception e) {System.out.println(e.toString() ); System.exit(-1); }
          long beg = System.currentTimeMillis();
          String tt;
          int i=0;
          try {
               while(true){
                    tt=in.readLine();
                    if(tt==null) break;
                    System.out.println( tt);
                    i++;
          catch(Exception e){System.out.println(e.toString()); }
          long end = System.currentTimeMillis();
          System.err.println("Time: " + (end-beg)/1000. + " seconds");

Generating RSS Feeds using files with extension .xml

Bonjour!
Apologies if this is not the correct forum - please redirect me if necessary.
I am trying to create an .xml file to upload to my server allowing me to generate rss feeds on my web site. If i understand correctly (I am a beginner webmaster) for my RSS feed to be valid, the first line must read for example '<?xml version="1.0" ?>
<rss version="0.91"> which is the case in my document until I save it! When I try to save the text file as .xml MAC OSX treats it as a Word File. I have tried saving as .txt with the same result. Trying to change the extension once the file has been uploaded to my server doesn't work either - the RSS feed validators still pick the document up as a Word file.
http://www.immobilier.rimcka.com/rss.xml
Could you advise, please?
Merci

What APP are you using to save it?
Might drop it on FileWiz and see if it has a Type/Creator code.
Might give BBEdit a look/try...
http://www.barebones.com/products/bbedit/
http://www.barebones.com/products/bbedit/featuresweb.shtml
"Syntax coloring and function navigation support for HTML, JavaScript, Perl, PHP, Ruby, SQL, XHTML, XML, and YAML Improved!"
Or any of these...
http://www.versiontracker.com/php/qs.php?mode=basic&action=search&str=xml+edit&s rchArea=macosx&submit=Go

Java file with extension xclass

Hello, anyone knows why a java class can have that extension? Is some sort of encryption? How is done?
Thanks, Simon.

Hi, thanks for the answer, but I don�t think it is that, because the application having this files doesn�t have the 95-98 look and feel. All the application is done in java, but in some directories it have files like example.xclass. Is the first time I see something like that, and I�m really intrigued...

How do I download files with extension?

Downloads via CEPHTMLEngine are locked.
FileReader is not working.
Node http.get is slow and strange.
Maybe something else?

Try the free irfanview instead:
http://www.irfanview.com

How to include header files with different extensions

Hi,
When i include a header file with extension .ch (myincludefile.ch), the compiler gives error messages but when i change the extension to .h, the problem disappears.
Can anyone help me getting rid of this problem?
For example, for the line below, I get a warning such as, "attempt to redefine MY_CONST without #undef". Remember when i change the extension to .h, the problem disappears.
#define MY_CONST 500 /* Constant */
Thank you very much

I don't see how the name of the file could cause or prevent error messages, except when template declarations are involved. So let's assume for now that the file has a template declaration.
The Templates chapter of the C++ Users Guide explains about including or separating template declarations and their definitions.
If you have only a template declaration in a file and the compiler needs the definition, it will look for another file with the same base name and include it automatically. For example, if you have files foo.h and foo.cc, and foo.h has a template declaration, the compiler will include foo.cc automatically, even if you didn't intend for that to happen. You can wind up with multiple delcaration errors that way.
When looking for a file containing template definitions, the compile will not include a .h file, so as not to create recursive inclusion. If changing the file name to .h causes your problem to disappear, it seems like an unwanted automatic inclusion is the problem.
You can try two things to find out:
1. Compile with the -H option. The compiler will output an indented list of all included files. See if you are getting a file you didn't intend, or the same file twice.
2. Compile with option -template=no%extdef. It disables the automatic search for template definitions.
If you find an unintended included file this way, you will probably have to change the names or organizaiton of some of the files. Our implementation of the C++ standard library depends on NOT using the -template=no%extdef option, which might mean you can't use that option.

Files with extension .sbc

Similar Messages

Maybe you are looking for