Files with raster image file extension ".THM": is it needed on Macs?

I've offloaded AVI videos files from a Canon digital camera. With each AVI file is a THM file. Does it serve any purpose when playing the AVI file in Quicktime on Macs or PCs?

Not really.
The .THM file is a thumbnail image. It acts like an icon preview of the .avi.

Similar Messages

Matching IOS capwap flash image file with Wlc image file

Hello to all Wireless Expert
My question will perhaps seems a little bit obvious for some of you, but here it is :)
I'd like to understand the relation between the Capwap IOS image file that I can see while typing 'dir flash' on an AP, and the version a WLC gives to that AP when joining it. My wlc is running 7.4.100 and on the AP's flash (2602i):
MYCAPWAPAP#dir flash:
Directory of flash:/
2 -rwx 75095 Oct 23 2014 07:54:43 +00:00 event.log
3 -rwx 280 Oct 23 2014 07:57:35 +00:00 lwapp_officeextend.cfg
4 -rwx 49372 Oct 23 2014 09:37:14 +00:00 lwapp_non_apspecific_reap.cfg
5 -rwx 95008 Oct 23 2014 07:54:34 +00:00 lwapp_reap.cfg.bak
10 drwx 2048 Oct 23 2014 07:54:33 +00:00 ap3g2-k9w8-mx.152-4.JB6
51 drwx 128 Oct 23 2014 07:57:38 +00:00 configs
52 -rwx 64 Oct 23 2014 07:54:34 +00:00 sensord_CSPRNG0
53 -rwx 64 Oct 23 2014 07:54:34 +00:00 sensord_CSPRNG1
77 -rwx 95008 Oct 23 2014 07:57:55 +00:00 lwapp_reap.cfg
7 -rwx 7192 Oct 23 2014 09:36:56 +00:00 private-multiple-fs
56 -rwx 0 Mar 26 2014 14:37:17 +00:00 ce
13 drwx 448 Nov 9 2013 19:06:17 +00:00 ap3g2-rcvk9w8-mx
8 -rwx 75303 Oct 22 2014 16:30:26 +00:00 event.capwap
76 -rwx 230 Oct 23 2014 07:57:34 +00:00 env_vars
31739904 bytes total (10376704 bytes free)
Does it mean that the 7.4.100 image file is included in the ap3g2 file? In other word, where is stored the wlc firmware image on the AP? As an AP has a primary image and a backup one, it must be stored somewhere on it, or maybe I'm missing something here!
Thanks,
Theo

Hi Theo,
If you read this post you will understand the ap3g2 represent the AP platform.
https://supportforums.cisco.com/document/77131/understanding-access-point-ios-images
platform-featureset-tar.version.tar
ap1g1 - 700 series (702w beginning with 15.2(4)JB5)
ap1g2 - 1600 series
ap1g3 - 1530 series
ap3g2 - 3700/3600/2700/2600 series (3700 supported beginning with 15.2(4)JB; 2700 beginning with 15.2(4)JB5)
ap3g1 - 3500/1260 series
In lightweight mode, there is Recovery Imange & Full-image. (Recovery image has min files to boot the AP & discover a WLC, then WLC will push the full image according to the software code running on WLC.
ap3g2-k9w8-mx.152-4.JB6
ap3g2-rcvk9w8-mx
In this case you can see some directories with the above name on your AP. So corresponding image should be within these sub-directories.
HTH
Rasika
**** Pls rate all useful responses ****

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

Trouble converting powerpoint files with png images to pdf-Can someone help?

Hello all,
In my line of work, I create and modify large sized posters that are created in powerpoint. I would have the files print ready by converting them to pdf. I usually have little to no issues executing this. However, I have been dealing with an issue of converting ppt files with png images. The size of the ppt is typically a 42x56 file. The several ways to convert to pdf produces an error each time. Png images are very useful as they provide much clarity vs jpegs or tiffs. The 3 ways I have tried below are:
A) File>Print>Adobe PDF>High Quality print settings/300dpi results to an error message that says:
     "Windows cannot print due to a problem with the current print setup. Try one of the following:
     *Check the printer by printing a test page from Windows.
     *Make sure the printer is turned on and online.
     *Reinstall the printer driver"
     A blank pdf opens up (Selected to open file after publishing)
B) File>Save as> Change file type as a pdf results in nothing happening. No pdf is produced.
C) Acrobat>Create PDF results to an error message that says: "An unexpected error occured. PDFMaker was unable to produce the Adobe PDF."
Again, this all happens with ppt files with png images. I took out the png images and attempted to convert to pdf, and the pdf is produced!
Can anyone provide any assistance in creating pdfs with png images or what settings I need to adjust? I am able to covert every other image type (jpeg, tiff, bmp), except for png images.
I am using Microsoft Office 2010 with Adobe Acrobat X on Windows 7 (This happened on Windows XP as well).

>I have a 48 slide presentation that has a small .png image in the "slide
>master" so it will show up on every page.
PowerPoint only has to store one instance of the image even thought it is
displayed on multiple slides. But Acrobat can't do the same, the image has
to be stored for every page that it appears on, so that would explain the
larger file size.
Acrobat is supposed to be able to optimize the storage of common background
images (at least that's the message I see when I do a "Save as..."), but I
have yet to see it to work. Maybe it depends on the application the orginal
file is created in and the PDF conversion method used.
Adding the image into a PDF file later as a watermark instead may be a way
to keep the size down (then it really only does store the object once),
though I believe that watermark images will appear in front of everything
else on the page (not sure if that's a problem for you, it depends on
whether any text or objects in the presentation ever appear in front of the
image).
What are the dimensions and resolution of the image in PowerPoint? You may
be able to go as low as 75 dpi and not notice a difference, it depends on
whether the image contains any areas of high contrast or text.

One of my imacs are saving all my files with a capitalized file extension?!

one of my imacs are saving all my files with a capitalized file extension?! For example: .psd is .PSD this really suck because I keep getting to versions of all my files. Can someone please assist me in fixing this. Thanks! -derek

Welcome to Apple Discussions!
Did you format your hard disk on that Mac any differently?

File size with JPEG Image files

I recently had to re-load all of my photos from an external hard drive due to the fact that my hard drive crashed. When I did, I noticed that the files are JPEG Image files. As a result, the file size is considerably smaller than the original file and the quality is much less.
Any suggestions on how to restore the file to the original format and quality?

Connie:
Yes, it seems you backup the Data folder instead of the Originals folder. Unfortunately, there's nothing you can do at this time.
In the future, I suggest you copy the entire iPhoto Library folder to the external and then keep it updated with a backup application like Digital Backup, Snyk, etc. They compare B (the backup copy) with A (the working copy) and copy new or changed files from A to B to keep them identical. After the initial copy process, the subsequent backups are rather quick, about a minute or less.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Mixed/multipart Request with a image file and a amr audio file

Hi people
I am struggling with multipart/mixed request as i am new to java and http. I basically have to write a java code to send a request with two attachments, an audio amr file and a image file of a proprietry format. following is my code
public static void GetVideo()
     HttpURLConnection httpConnection = null;
InputStream bis = null;
     InputStream bis1 = null;
OutputStream bos = null;
     File audioFile = new File("voicejunk.amr");
     File avatarFile = new File("out.frf");
     System.out.println("Entered Get Video");
     String Boundary = new String("asdfgh");
try
URL url = new URL("http://10.4.21.51:5006/");
httpConnection = (HttpURLConnection) url.openConnection();
     httpConnection.setRequestProperty("Cache-control", "no-cache");
httpConnection.setRequestProperty("Pragma", "no-cache");
httpConnection.setRequestProperty("Content-Type", "multipart/mixed;boundary= \"asdfgh\"");
     httpConnection.setRequestProperty("video-type", "3GPP");
     httpConnection.setRequestProperty("video-encoder", "H.263");
httpConnection.setRequestProperty("audio-encoder", "AMR-NB");
     httpConnection.setRequestProperty("video-size", "QCIF");
     httpConnection.setRequestProperty("video-fps", "10.0");
     httpConnection.setRequestProperty("video-anti-aliasing","yes");
     httpConnection.setRequestProperty("Content-Length", Long.toString(audioFile.length()+avatarFile.length()+(3*Boundary.length())));
     //byte[] bytes = createMessage();
     //httpConnection.setRequestProperty("Content-Length", String.valueOf(bytes.length));
//System.out.println("Size of: "+bytes.length);
     httpConnection.setRequestProperty("Expect", "100-continue");
     httpConnection.setRequestProperty("Connection", "Keep-Alive");
     //String AvatarType = new String("FRF");
httpConnection.setRequestMethod("POST");
     httpConnection.setDoOutput(true);
     bos = new BufferedOutputStream(httpConnection.getOutputStream());
     bos.write(Boundary.getBytes());
     Session session = Session.getDefaultInstance(new Properties());
     ByteArrayOutputStream baos = new ByteArrayOutputStream();
     Message msg = new MimeMessage(session);
MimeBodyPart mbp1 = new MimeBodyPart();
FileDataSource filedatasource1 = new FileDataSource("seestorme.frf");
DataHandler dh1 = new DataHandler(filedatasource1);
mbp1.setDataHandler(dh1);
mbp1.setHeader("Content-Type", "x-seestorm-avatar/frf");
     MimeMultipart mmp = new MimeMultipart();
mmp.addBodyPart(mbp1);
msg.setContent(mmp);
msg.writeTo(baos);
     bos.write(baos.toByteArray());
bos.write(Boundary.getBytes());
     ByteArrayOutputStream baos2 = new ByteArrayOutputStream();
     Message msg2 = new MimeMessage(session);
     MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource filedatasource2 = new FileDataSource("voice.amr");
DataHandler dh2 = new DataHandler(filedatasource2);
mbp2.setDataHandler(dh2);
mbp2.setHeader("Content-Type", "audio/amr-nb");
     MimeMultipart mmp2 = new MimeMultipart();
mmp2.addBodyPart(mbp2);
     msg2.setContent(mmp2);
msg2.writeTo(baos2);
     bos.write(baos2.toByteArray());
bos.write(Boundary.getBytes());
//httpConnection.getOutputStream().write(bytes);
     //httpConnection.getOutputStream().flush();
     System.out.println("Request made");
int result = httpConnection.getResponseCode();
     String Msg1 = new String(httpConnection.getHeaderField(0));
     String Msg2 = new String(httpConnection.getHeaderField(1));
     String Msg3 = new String(httpConnection.getHeaderField(2));
     String Msg4 = new String(httpConnection.getHeaderField(3));
     String Msg5 = new String(httpConnection.getHeaderField(4));
     System.out.println(Msg1+" " + Msg2+" " + Msg3+" " + Msg4+" " + Msg5+" ");
if (HttpURLConnection.HTTP_OK == result) {
          System.out.println("Received HTTP result = " + result);
saveResponseData2(httpConnection.getInputStream(),"SeeStorm.frf");
} else {
System.out.println("Received HTTP result = " + result);
     catch (MessagingException me) {
me.printStackTrace();
catch (MalformedURLException mue) {
mue.printStackTrace();
} catch (ConnectException ce) {
ce.printStackTrace();
} catch (IOException ioe) {
     ioe.printStackTrace();
} finally {
if (null != bis) {
try {
bis.close();
} catch (IOException ioe) {
ioe.printStackTrace();
if (null != httpConnection) {
httpConnection.disconnect();
i frankly have no idea how to create a multipart mixed request with boundaries. I get a bad http request error with the above code. Can please someone help me.
Thanks
Adil Saleem

Your WriteImage servlet needs to read the image file in from wherever it is (hard drive, database, whatever), then write it back out to the browser. To do that, first use the HTTPServletResponse object to send the appropriate headers, then call the getOutputStream() method to get an output stream to write the data to. This data will be sent to the browser which, if you've set the headers correctly, will display it as an image.
It's been a long time since I did this (we abandoned storing images in databases quite a long time ago), so I can't be more specific than that, but hopefully that'll be enough to get you going. If you run into any problems, reply and I'll see if I can help further.

Unzipping files with .car and .sar extension.

Hi,
I'm searching in http://help.sap.com the download for unzipping files with .car and .sar extension.
What is the exact name of the file do that?
The SAP release is 4.7 non unicode 32 bit.
Best regards

http://help.sap.com
click on SAP R/3 and R/3 Enterprise then on Installation & Upgrade Guide, insert user and psw,
click on Downloads tab, click on Download (left side of the web page), click on Support Packages and Patches, and then on Search for Support Packages and Patches, put SAPCAR as search term.

I just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

i just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

cnsst,
Are we talking Edit>Preferences>General>Anti-Aliased Artwork?

Where does Lightroom put HDR in the grid view? Is there anyway to have Lightroom stack the HDR file with the source files?

I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.

Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested?

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Connect the music file with the artwork file post-computer-crash?

I want to retrieve artwork after restoring my computer?
So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
is there a data file and will they automatically sync to the artwork if they are in different locations?
Thank you for your help, Allen

pfanzier wrote:
… is there any reason i shouldn't delete the artwork folder?
All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
pfanzier wrote:
itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

How to delete a jar file after loading image files from it

Hi,
How can I delete a jar file after some image files have been loaded? For example, say, I have "a.jar" which contains an image "a.gif" in the root directory of the c drive. I would like to get the image size and then delete the jar file. Here is the code snippet:
    URL url = new URL("jar:file:/C:\\a.jar!/a.gif");
    Icon icon = new ImageIcon(url);
    System.out.println("icon size ? " + icon.getIconHeight());
    File file = new File("c:\\a.jar");
    while(file.exists())
        file.delete();
        try
            Thread.sleep(100);
        catch (InterruptedException ignored)
    System.out.println("file deleted.");I get the image size correctly but just can not delete the jar file. Apparently the file handle is not released, but how to close it? Any hint will be appreciated.
Justin Jan

I am sure the URLConnection.defaultUseCaches is set before it is connected otherwise I should catch an IllegalStateException on conn.setUseCaches(false).
        try
            URL url = new URL("jar:file:/C:\\a.jar!/a.gif");
         URLConnection conn = url.openConnection();
         conn.setDefaultUseCaches(false);
         conn.setUseCaches(false);
            Icon icon = new ImageIcon(url);
            System.out.println("icon size ? " + icon.getIconHeight());
            url.openConnection().getInputStream().close();
            System.gc();
         System.runFinalization();
            File file = new File("c:\\a.jar");
            while (file.exists())
                file.delete();
                try
                    Thread.sleep(10);
                catch (InterruptedException ignored)
            System.out.println("file deleted.");
        catch (Throwable t)
            t.printStackTrace();

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
2. select file and choose "File... Open" command-o in the Finder
3. drag file to the application icon in the Finder.
4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
To reproduce
Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
"Solution"
The file WILL open using File... Open... command-o while in InDesign application.
Rename the file or folders that have a "#" (shift-3) in the filename.
Report to Adobe if it bugs you.
This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
Untested in Panther or before and
Untested with CS3 and earlier in Snow Leaopard.
Anyone have those and want to try this... ?

In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
You need Soxy 1.0.7 from:
http://www.rorohiko.com/soxy
Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
(Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Files with raster image file extension ".THM": is it needed on Macs?

Similar Messages

Maybe you are looking for