Files won't save since Maverick upgrade
I have a file that exist in a folder and would like to replace it with an updated version of the same file (example.xls with example.xls) it asks if I want to replace and I say yes but the original file remains. I must first delete the original then svae the new version. This is only since I did the Maverick upgrade. Is there a fix for this.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
Safari pages won't load since Mavericks upgrade
Installed Mavericks a few days ago on my iMac and some really annoying bugs have been introduced to Mail (7.3) and Safari (7.0.6). I can't automatically add multiple addresses to emails anymore using the space bar; I have to manually type out certain addresses, add commas, etc. Certain webpages, including youtube and google, won't load on Safari. Chat support had me repair permissions with disk utility, clear cookies and reset safari, but none worked. It was also suggested that I do an SMC reset, a PRAM reset, and a safe reboot. I haven't done any of these, basically because I'm nervous about introducing any more wonkiness that I can't undo. I've been reading about similar problems with Mavericks for months now (I only upgraded because I needed it for Final Cut) , but I never see any solutions. Can anyone help me??? Thanks.
Go step by step and test.
1. Power cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
2 Empty Caches
1. Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
Option click the "Go" menu in the Finder menu bar.
Select "Library" and then "Caches".
Look for the folder 'com.apple.Safari"
Right click "com.apple.Safari" and select "Move to Trash"
Relaunch Safari.
3. Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
4. Remove all third party addons, plugins and anti-virus software
Run EtreCheck .
https://discussions.apple.com/docs/DOC-6173
5. Deselect Proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
Best. -
Binary files won't open since I upgraded Firefox for my mac.
Ever since I've updated my Firefox for my mac, I can't open Binary files. Example: When I click on an email attachment a window opens - You have chosen to open
"File Name"
which is a: Binary File
from: http:/where.ever
Would you like to save this file?
When I chose "save file" my "downloads" window would pop up but the file would not be there.
I was able to remedy that problem to the point at which the file would show up in the "downloads" window but when I attempted to open the file I would get:
! Couldn't open the file. It may be corrupt or a file format that Preview
doesn't recognize.
So far this has happened with all Binary files I have attempted to open since my Firefox update.
Never had this problem before.
== This happened ==
Every time Firefox opened
== I updated FirefoxExactly the same problem. It doesn't happen with Safari. Seeking help before I abandon Firefox!
-
Screen saver won't start since Lion upgrade. Two different machines, same issue.
Screen saver won't start since Lion upgrade. Two different machines, same issue. Help
For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith -
My trash won't empty since I upgraded to Lion.
Other than using rm -rf ~/.Trash/* in the terminal what can I do. Reparing permissions didn't hpl.
regards
robinI have the same problem. I can put things into the trash, but when i empty the trash it makes the crumple noise like its throwing it away and the files stay in the trash and the icon stays full. I have 10.7.2. I also have Parallels installed on my machine.
Before this problem, I was unable to add files to my trash can and then I removed this program called CleanMyMac, which I guess wasn't compatible with Lion, and now I can at least add items to the trash can. It seems I am having a lingering issue due to that program.
I have a case with Apple Senior Support Analysts and they can't figure it out...
Please help!! I do not want to format and start all over just to empty my trash can
I also do not want to install Trash It (which would empty the trash i've heard) but will not resolve my issue only cover it up.
Thanks!! -
CS4 Photoshop - saving on NAS storage - open file won't save without renaming it.
open file won't save without renaming it. If you try to save a file that you have adjusted in CS4 Photoshop on a networked drive, it won't save it. If you rename it, sure. If you are working on the local drive it is not a problem.
By the way, we have 2 users in house. Both on Mac systems and both are using CS4 Creative Suite. One Mac is OSX 10.6.8 - the other is Mac OSX 10.8.3. The older Mac system does not have a problem.
Is this a Mac operating system problem? would upgrading to CS6 solve the issue for our Mac OSX 10.8 ?Try the forum for Adobe Acrobat.
-
I just purchased Final Cut Studio today. I'm going through the tutorial and my files won't save in the folders created for the tutorial on my HD. I go to "send to" for Motion and Motion opens and asks for a data rate. Then when i choose one Motion opens it's window but there is no project. Any clue?
If you copied the files to your hard drive before working with them, make sure you have permission to both READ and WRITE to all the files involved. Highlight a file and hit Command i (Get Info) to see how the permissions are set. You can change them there if needed.
-DH -
Why does my mouse go behind illustrator CS6 window since maverick upgrade?
why does my mouse go behind illustrator CS6 window since maverick upgrade? I can see the mouse becaus I can highlight items, but to get the mouse back in front I need to click out of Illy and then click back in. Slightly annoying.
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check if there is an update for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers -
Addresssourcesync high cpu since maverick upgrade what to do?
Addresssourcesync high cpu since maverick upgrade what to do?
1 enable dead connnection detection in sqlnet.ora and/or set an idle time on the default profile.
2 v$session last_call_et in seconds.
Generally this is a result of 'programs' connecting for every statement via jdbc et other drivers.
You can choose to configure connection pooling in conjunction with multithreaded servers.
Open_cursor is NOT an instance wide limit though, it is session wide.
Sybrand Bakker
Senior Oracle DBA -
Issues with .mov files from Canon 5d mk3 - since Mavericks upgrade...
Hello,
Ever since I upgraded my OS to Mavericks, Premier Pro has been refusing to 'see' .mov files in my projects. In the timeline the bits of .mov footage are appearing as red blocks, in the preview pane you get 'Awaiting media' then the red block of doom.
So currently I'm having to convert footage from .mov to mp4v - then it seems to be OK. The upgrading to Mavericks could be a coincidence ... but before that I had no issues with PP.
This is my system:
Processor 2.8 GHz Intel Core i5
OS X 10.9.1 (13B42)
Graphics ATI Radeon HD 5750 1024 MB
Memory 12 GB 1333 MHz DDR3
I would love some help/ideas on this - it's doing my head in having to convert .mov files, and having to back convert stuff in my existing projects ... please help!
Best - Abbottssnapper
[Text formatting corrected. Please type your posts into the browser, as copy/paste often leaves unwanted code.]
Message was edited by: Jim Simon>Ever since I upgraded my OS to Mavericks
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question -
Mail Issues since maverick upgrade
Since upgrading to Mavericks I have been having the several issues with Mail. The are as follows:
Scrolling is available intermittently or not working at all (using Magic Mouse)
Problem: Scrolling works for a while when using mail, then stops working. I have to click on the side bar to go up and down on all scroll screction within mail. This issue only resolves when quitting Mail, and sometimes will only work again when shutting down and restarting my iMac.
Scrolling on folders withing the main body of my iMac also stop working from time to time and only resolves when force quitting finder, or restarting my mac (or somethime shutting down and restarting the mac).
Email address pull down menu does not close down
Problem: When typing an new email and selecting an outgoing address the pull down menu appears, but once an address is chosen using the mouse curser the pull down menu remains on screen and does not close down automatically. I can not close it with teh mouse curser and have to use the keyboard (return or tab buttins) to close down the drop down address menu. It used to close down prior to Maverick upgrade. The pull down menu remains on screen blocking access to the CC and Subject sections.
Saving Mail attachments to desktop folders does not work.
Problem: Saving attachements from mail does not work at all using the drop down menu within mail. The process of using the save attachments menu within mail seems to work, but when you go to the folder after using this process, the item or items have not been saved.
Click and drag is the only way to move attahcements from mail to desktop folders now.
Mail will not quit automatically when shutting down Imac
Problem: When shutting down my iMac, mail will no longer quit automatically and prevents the shut down. Once shut down has been selected, Mail will no longer quit and I have to use Force Quite to shut it down.
Would welcome suggestions on how to resolve these issue.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Mail won't launch after Mavericks upgrade OS X 10.9
This is part of the error message I receive:
Process: Mail [315]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: 7.0 (1816)
Build Info: Mail-1816000000000000~1
Code Type: X86-64 (Native)
Parent Process: launchd [185]
Responsible: Mail [315]
User ID: 501
Date/Time: 2013-11-02 21:36:27.404 -0700
OS Version: Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID: 66917214-C98E-90B9-0022-46A9AFC950C9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5078fff8
VM Regions Near 0x7fff5078fff8:
MALLOC_SMALL 00007fb792856000-00007fb793000000 [ 7848K] rw-/rwx SM=S/A
--> STACK GUARD 00007fff4cf90000-00007fff50790000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Stack 00007fff50790000-00007fff50f90000 [ 8192K] rw-/rwx SM=COW thread 0
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00007fff94402000 CFEqual + 352
1 com.apple.CoreFoundation 0x00007fff943edd18 CFBasicHashFindBucket + 3528
2 com.apple.CoreFoundation 0x00007fff943ecf1f CFDictionaryGetValue + 111
3 com.apple.CoreText 0x00007fff8c022570 TBaseFont::CopyAttributeInternal(void const*) const + 68
4 com.apple.CoreText 0x00007fff8c0bafaf TInstanceFont::CopyTraitsInternal() const + 43
5 com.apple.CoreText 0x00007fff8c0b446b TBaseFont::CopyTraits(bool) const + 35
6 com.apple.CoreText 0x00007fff8c0bafd2 TInstanceFont::CopyTraitsInternal() const + 78
I've tried verifying the disk, and repairing the desk, but can't find a fix. It won't launch at all ever since the Mavericks upgrade.If you did not install the software following the upgrade but did some form of transfer or migration then you should probably uninstall and then use the Cleaner Tool. After that install using the discs or a downloaded set of installation files.
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
Mov files won't open on mavericks
hello
i have a problem to open a mov video file that created in iMovie through mountain lion.
since i upgrade to mavericks that mov file won't open.
i try all the ways by using most of the convertor application that i can use.
even try with quick time 7 adding codecs packages and perian but nothing show on ....
i can't get even infos from that file. It only shows that is 8,9 GB of space and nothing more.
please if you have an advise on this , i would be grateful
thank you
Dimitris .GreeceI couldn't even find any QuickTime files on your page.
-
Mac Book Pro slow with boot up since Mavericks upgrade
Hi folks,
my mac book pro is booting up very slow and running slow as well since I upgraded to Mavericks.
Tried cleaning up, booting in safe mode, veryfying disk utility but nothing detected.
Can someone check my ETRE or does anyone have another idea what I can do to better the overall performance of my mac?
Thanks and cheers
EtreCheck version: 1.9.11 (43) - report generated 10 June 2014 1:19:56 pm GMT+2
Hardware Information:
MacBook Pro (15-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,3
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:14:20
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (91.53 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents:
[loaded] com.facebook.videochat.[redacted].plist Support
User Login Items:
Skype
Dropbox
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 Support
Silverlight: Version: 4.0.50826.0 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
DuckDuckGo: Version: 1.6.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 212.05 GB
Destinations:
My Passport for Mac [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 2
Oldest backup: 2014-05-15 12:51:17 +0000
Last backup: 2014-05-30 21:29:41 +0000
Size of backup disk: Excellent
Backup size 931.16 GB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% WindowServer
3% Dropbox
1% fontd
0% com.apple.WebKit.WebContent
0% Skype
Top Processes by Memory:
172 MB com.apple.WebKit.WebContent
143 MB Safari
82 MB Skype
78 MB Dropbox
66 MB mds_stores
Virtual Memory Information:
1.90 GB Free RAM
1.18 GB Active RAM
190 MB Inactive RAM
495 MB Wired RAM
273 MB Page-ins
0 B Page-outs[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
Western Digital Software and Mavericks
Remove the software.
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Files won't save to remote in CS4.
I started this website in CS3 and right before my upgrade, the "Save to Remote" stopped saving. I have upgraded to CS4 and still on this one website, I can not "Save to Remote". Nothing changes on the remote end after my save.
Any ideas on what to check out?
I created a new site and started from scratch copying the files from the remote to my new local folder and still it won't save to remote. Not sure what to check but there must be a setting wrong somewhere.
Thanks.You may want to look at the dates and times for both the files on your computer and those on your server. They should be the same but for some reason the ones on the server are not being updated. After identifying the ones that are "out of sync" then deleted the old ones from your server manually and "put" the ones on your computer. try with one file first.
Hope it helps
Patrick
Maybe you are looking for
-
Some Blu rays and DVDs come with digital copies and you inset them into the dvd drive and it downloads the movie to itunes and then you can put them on any iDevice. The new iMac does not have a dvd or disc drive. What can I do?
-
Tracking the change of value/ New insert within a table
Hi! Can you please suggest any way to track the change/s we are making in the Table. I tried the following: 1. Activated the Log option for the table in Technical Setting 2. Through SCU3 we are able to see the changes that has occurred in the table.
-
Help on COPA material Valuation
Dear All, Our client has 3 manufacturing plants. 2 in Delhi, 1 in Pune Plant in Pune manufactures few products and on the other side receives manufactured products from Delhi plants and does some processing then despatch to customers. The processing
-
Selecting unused dates for list
Ok, last one for today.. I'm trying to populate a select list with Month-Year values between the first entry in the table and the previous month(sysdate - 1 month). At the moment I have this, which will select all months between the last entry in the
-
I am trying to complete the task within Task Notification email itself. I configured the custom email template to have all the actions of the assigned task (displays as expected). When the user clicks on any action link, it open email client with app