FileSelectPopup, discriminate multiple types with same extension

Hi,
When using a file select popup with multiple file types of the SAME extension, such as:
FileSelectPopup ("", "(8 bit)*.tiff", "(8 bit)*.tiff;(16 bit)*.tiff", "Save As", VAL_SAVE_BUTTON, 0, 0, 1, 1, file);
Is there any way to know which "save as type" was selected by the user on the popup?
(win7x86; CVI 2010)
cheers,
Diz
Solved!
Go to Solution.

I dodn't focused on the "save" option enabled.
In such a situation I would design a small options panel with abutton to select the destination filename using FileSelectPopup, a radio button or a ring to discriminate the file format and usual OK and Abort buttons.
This unless you can determine the final file format from the origin of your data (i.e. if you are saving a 8bit image, use 8-bit TIFF format and so on, provided you must not perform format conversion during save).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Reading & Writing files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR

Hi Folks,
How to read & write files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR.
Please let me tell if anybody knows asap.
Thanks & Regards,
Anderson

Thanks Jon,
But, I know how to read the file if we give exact file path
I need to get the path and read file(s) with same extension files in the same folder using adobe air, not single file.
Don't have file path even, i have folder path, in that somany files are there. So i need to get which are the same extension(Ex: ".txt", ".sas") files
If you have any idea , please help me out
Regards,
Vijay.

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Topic: Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the same collection type. When I use OracleXML getXML to generate xml, the tag for all elements created for any of the matching types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from the work_references_t type (i.e., there are no <comment_in>, <erratum_in>, <republished_from> or <republished_in> elements)
sample result is:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
The above xml should be:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_IN>
<COMMENT_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_IN_ITEM>
</ERRATUM_IN>
<COMMENT_ON>
<ERRATUM_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</ERRATUM_IN_ITEM>
</ERRATUM_IN>
<REPUBLISHED_FROM>
<REPUBLISHED_FROM_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</REPUBLISHED_FROM_ITEM>
</REPUBLISHED_FROM>
<REPUBLISHED_IN>
<REPUBLISHED_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</REPUBLISHED_IN_ITEM>
</REPUBLISHED_IN>bracketed portion [] is contained within the refsource string to indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the dtd, the dtd includes the appropriate elements (comment_in, erratum_in, republished_from and republished_in). However, it incorrectly defines refsource and note multiple times (once for each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the
same collection type. When I use OracleXML getXML to generate
xml, the tag for all elements created for any of the matching
types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)
select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from
the work_references_t type (i.e., there are no <comment_in>,
<erratum_in>, <republished_from> or <republished_in> elements)
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
bracketed portion [] is contained within the refsource string to
indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the
dtd, the dtd includes the appropriate elements (comment_in,
erratum_in, republished_from and republished_in). However, it
incorrectly defines refsource and note multiple times (once for
each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more
concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

Multiple Clusters with same computers

Is there a way to set up multiple clusters with the same computers.
For example
Cluster A has computers 1, 2
Cluster B has computers 1, 2, 3, 4, 5
The reason behind this is that computers 1 and 2 are always available, but 3, 4, 5 are used during the day. I'd like to have a day cluster and a night cluster that I can just select as needed.

Hi Jake, I was playing with this type of thing when FCS1 first came out using some old powerbooks.
Yes you can kind of do this using UNMANAGED SERVICES but I will stand corrected for COMPRESSOR3.app.
In FCS2, compressor 3, simply if you use *MANAGED SERVICES* of the service nodes available through a defined a specific cluster (you would have used appleqmaster utility.app) than I believe those service nodes are dedicated to that cluster.
Sure you can make 'INSTANCES" of compressor for example and the 'renderer" instances dedicated to particular cluster using this as an example... let say...
HOST1 = MACPRO8CORE with 4 instances of compressor (as C1,C2,C3,C4 via vi 4 virtual clusters) and 8 instances of renderer (R1,R2,..R7 & R8).
HOST2 = MACBOOKPRO with 1 instance of compressor (as C1 & C2 with 2 virtual clusters) and 2 instances of renderer (R1,R2).
HOST3 = PowerbookG4 with 1 instance of compressor (as C1) and 1 instances of renderer (R1).
only as an example
ClusterA: Host1[C1,C2C3, R1,R2,R4,R5), Host2[C2]
ClusterB: Host1[C4, R6,R3,R6,R7), Host2[C2,R1R2], HOST3{C1,R1]
In fact I just tried it...
However as I thought for managed services be assured that you cannot SHARE a service node with two or more clusters. I will stand corrected.
Messy but seems to work but useless with the powerbook you'd agree
However depending on your workflow and commecrial needs (say for busness prioriries for a specific client) for best results use *UNMANAGED SERVICES* ....
Simply hook everything up over GBE, with all the usual tweaks such as "NEVER COPY SOURCE" and MOUNTING all source targets and compressor work files over HFS on the GBE subnet (and many other tweaks) and treat the set up as a huge bucket.
Use priority on the batch submission. It's not too smart but at least you have some manipulation over the queues.
The resource manager in QMASTER is not so smart. So despite a service node going idle it does not seem to redirect work from wone node to another for load balancing..
I have only tried this with SEGMENTED TRANSCODING.
Rendering (Shake) works great and seem simpler. My time is with multipass segented transcoding where I want H.264 from DVCPROHD and dont want to wait all day for it, especially where I have tweaked the timing in compressor a bit.
Try it out.
BTW as many contest on this forum, QMASTER/COMPRESSOR can be a bugger to fix if it plays up. and it has for me as well.
post your results.
HTH.
w

Multiple contacts with same phone number

I have multiple contacts with the same phone number. Skype will not permit the creation of a second contact with the same phone number.

I have the same problem with my contacts.
I have one external phone number and then use extensions for their desks. I want to embed the extension number in the contact name and use the common phone number.
Any ideas or solutions?
Thanks

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

FileSelectPopup, discriminate multiple types with same extension

Similar Messages

Maybe you are looking for