Filesharing via Ethernet

I am linked to our two other Macs (a G4 iMac running OS X 10.3.9 & new Intel MacBook) and the internet via an ethernet LAN of patch cables and switches. There are no problems with internet access, and in the past it worked fine for local file sharing but now when I try to connect to the G4 which correctly shows by name under Network in the finder I receive a "Connection failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again" message and the Finder sometimes crashes. I get the same response using the menu Go method with the IP address. The G4 can connect with my G5 without problems. I have tried with firewalls off without improvement. Are there any known software or other issues?
PowerPC G5 iMac Mac OS X (10.4.10)

This "lost" alias issue comes up quite often here... wish it were easier to fix/diagnose!
You might try toggling off the Finder>Preferences>Sidebar>Show Network Icon, then reboot 2 to 4 times before toggling it back on.
Trashing these works sometimes...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/com.apple.networkConfig.plist
Reboot... of course you dont have to trash them, you can just move them to the desktop to drag back if it doesn't work.

Similar Messages

Powerbook G4 can't connect via ethernet but connects via airport

We have a small office network connected to an Efficient Networks DSL router that's managed by our isp. The router has 4 ports and a linksys 8 port switch is connected to one of those ports. Another D-Link wireless router/switch is connected to another port.
2 i-macs connect without problem via ethernet cable. They are set to DHCP and get 192.xx private addresses. Both run 10.4.5. Another older imac running 9.2.2. also has no problems.
I recently purchased a powerbook G4 and it will not connect via ethernet to the Efficient networks router. At first it was connected to the linksys, so decided to connect it direct to the Efficient Networks router. With DHCP, it acquires a 169. internet address which is self generated (i.e. no real connection). I tried to give it a static private address (talking to the isp provider). They could see the powerbook but saw all zero's (presumable mac address). By the way the Powerbook works perfectly at home connected via ethernet cable to a D-Link router connected to a cable modem so it's not a physical problem. I even checked the ethernet cable I used in the office with another computer - no problem.
When I switch to airport in the office, the powerbook connects to the network and the internet. I get some strange warning messages showing the server's and the router's private ip addresses. I click ok, and the powerbook finds an unassigned private ip address. It's the only way it will work, but it causes problems, because I can't connect to one of the network printers. Speed also isn't great.
Can anyone give me advise how to proceed. I am no expert on this stuff so keep it as simple as possible.
Tks

Tim,
Thanks for your help. Here's what I've done before reading your e-mail. The D-Link DI-524 wireless router is connected to the Effiicent Neworks DSL router as you mentioned. One ethernet port of the EFF.Net. router is connected to the WAN port of the DI-514.
Because I have a D-Link router at home which works flawlessly with my powerbook, I decided to connect the ethernet cable of the powerbook to the D-Link which has 4 ethernet ports. Lo and behold, the powerbook acquired a private ip address and connected to the LAN and internet!
When I connected the powerbook direct to the Efficient Networks router, it could not communicate. I believe that there must be some software incompatibility between the powerbook and the Efficient Networks router. By connecting to the D-Link, the D-Link assigned an ip address to the powerbook, and it could connect to the server, lan, etc..
Only problem is that I have a Brother network printer that cannot connect to the powerbook. My powerbook cannot find it on the network. Because there is a linksys switch connected to the efficient networks router's third ethernet port, maybe as you said, going through the D-Link via DHCP (when the Linksys is also acting as a DHCP server, might cause this type of problem. What do you think?
As a final note, other imac G5's connected to the linksys switch (which then connects to the Efficient Network's router) have no problem connecting to the lan or internet and have no problem connecting to any of the printers. When I put the powerbook on that switch, I could not connect to the internet - i.e. whether connecting via the lynksys switch or direct with the efficient networks router - same results: no internet connection whether manually or via DHCP.
So the imac G5 has no problem with the efficient networks router but the powerbook G4 hits a brick wall. The G4 likes the D-Link router. I am concerned (and I will have to check this) that if I turn off the dhcp server feature from the D-Link, that whatever software issue crops up between the powerbook and the Efficient Networks router, will rise up again, because the D-Link will act like a simple switch (just like my linksys switch), and we'll be back to square zero. In any case, no harm in trying. This may be the cause of the Powerbook not seeing that Brother printer (even though it sees another printer and other macs).
Having spent hours reading about network problems, I think it's safe to say that macs have problems with certain routers. Why a G5 works and a powerbook G4 doesn't is beyond me, but clearly software must play a role.

Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

How to connect a pc via Ethernet to an Airport Extreme

For about a year I have had an Airport Extreme running my iBook laptop on wifi and the iMac on Ethernet. I also have an IBM Thinkpad (T/P) running Windows 2000 which I wanted to connect via Ethernet cable to the AE and get on the internet to use various ham radio applications written for peecee's only. So far I have not been able to get the T/P to connect to the web, trying every way to get the thing to connect. The T/P is a second hand unit from work and I have no manual for it. There is also little documentation in the AE booklet concerning Ethernet and non-Mac gear. Does anyone have a suggestion as to how I can make this work, or another website that may have more specific info?
Message was edited by: bob.c

You are absolutely right about nothing with Windows being easy..... The ethernet cable is plugged in and I went to Network Connections and followed the wizard. Now I have a small icon on the right side of the bottom bar, looks like two computer screens but only one is green. A right click on it says the local area network is connected and sending 100 Mbps but receiving zero. If I go to Tools/Internet options, I can go thru the Internet Connection wizard for setting up a LAN. One of the pages asks to configure the proxy settings and has two choices: automatic discovery or "Use automatic configuration script" with a box labeled "Address". I don't know what to put in this address but have tried the IP address and the router address: no joy.There is also a check box for Manual Proxy server and I have tried both Yes and No....again, no joy. It's as though the T/P sees the internet doorway but can't bring anything back thru the door! Any further ideas sure would help. Thanks!

Airport Extreme: How to connect a Linksys VOIP device via ethernet

Hi there!
I am trying to connect Linksys PAP2T device via ethernet to my Aiport Extreme. It gets an address assigned 10.0.1.2 but when I access the device, I am not able to connect to internet. Do I need to key in my network password anywhere?

Okay, so to answer my own question after considerable sleuthing . . . for anyone else trying to do this:
Connect your computer to the bridge using an ethernet cable, then open a browser and enter the following address: http://169.254.1.250
This will take you to a login page: leave the username field blank, enter "admin" in the password.
You will see the Cisco setup page. I selected manual setup and entered the name of my network and password. I got a progress bar and finally the wireless network light on the bridge started flickering.

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

How do I connect a PC via ethernet to my new Airport Extreme router?

I just replaced an old Actiontec router with a new Apple Airport Extreme router to work with my Verizon FIOS service. Connection to all Apple products via ethernet or wireless works OK, however I cannot get the PC up and running via its ethernet connection to the Airport Extreme. Any help would be much appreciated.

If your other devices are working then it is probably the PC's IP configuration.
First, make sure that the PC is actually connected to the Extreme by verifying the lights are on at the Ethernet ports on the PC and the Extreme.
If you are using DHCP to manage the IP addresses then make sure that the PC is configured to "Obtain IP Address Automatically" for both IP versions 4 and 6.
When I replaced my Linksys w/ an Extreme I forgot that I had a couple devices configured with static (manual) IPs. My old one used the "192.168.1.nn" and my Extreme defaulted to "10.0.1.nn". Once i converted all the static IPs to the correct subnet then all was good.

No internet access via ethernet port

Hi, have been using my emac via ethernet cable to router, for many months with NO problem accessing internet and others cabled to same router also having no problem and I have used my Pwr Mac wtih no problem and have never had to make any specific settings to either to access the net via the router which gets its wifi signal from elsewhere. With system preferences > network > ethernet open I can see the the router is being recognized cause it appears or dissappears as soon as I plug or unlug the ethernet cable. I open "Activity Monitor" and occasionally, very briefly, there will be data incoming( green spikes ) or outgoing( red spikes ). HD verified OK, ran disk permnissions and scripts. Have not yet run Apple or other( Micro-mat ) hardware testing programs tho I will later. Does anyone know if there is a PLIST file that can get corrupted that would affect ethernet port functioning properly? My guess it is hardware but since I can see the router is recognized makes me wonder about corrupt file ergo a system error or possibly inloaded some file that caused conflict. I also booted from my external drive and tried accessing from the cloned OS system and still did not work. The cloned system is the original has never been updated, nor has any of the applications in clone, so, if it was "system" problem the clone should have worked. However, I had cloned user ergo newest documents, library etc, so that would be the only possible source of conflicts when booted from clone system....Thx Ran

Ping test should be interesting.
Start by pinging router address. Should be able to ping building router if you can figure out it's address.
Could you go wireless to building net? You might buy a usb dongle.
USB dongle
Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard.
http://rokland.com/store/productinfo.php?productsid=319
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 2 Year Warranty.
http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
There are usb to ethernet cable.
You could try another browser.
*MAC Address*
Every ethernet port has a unique MAC Address. A router can block on a MAC Address. That is why I suggest you check out your router.
Note MAC is not Mac. MAC is all upper case.
definition: http://en.wikipedia.org/wiki/Mac_address
*Ethernet port hardware*
I'd say this was some kind of strange hardware problem.
*Dns problem?*
It has symptoms of a DNS problem. The little traffic is a symptom of the problem. You said all the numbers were the same, however.
Verify DNS
apple > system preferences > network
Double click on network connection you are using.
Pick the TCP/IP tab.
Verify that you have a DNS Server. If you do not, look on your windows machine and see what the net address is. You can also pick using DHCF and still enter you DNS server address.
You can use
harddrive > applications > utilities > network utility
to diagnose the situation.
You can ping google.com. Result:
Ping has started ...
PING google.com (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
If that does work, try pinging 64.233.167.99 Result:
Ping has started ...
PING 64.233.167.99 (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
--- 64.233.167.99 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
If pinging 17.254.3.183 works but pinging Google.com doesn't. You have a bad DNS Server address.
BDAqua suggests in a post.
You can use OpenDNS for looking up web addresses.
Put these numbers in Network>TCP/IP>DNS Servers for a try...
208.67.222.222
208.67.220.220
I think they now pretend you need to join to use, but you don't.
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger
(Please note that you do not need to a joint Open DNS to use it.)
http://discussions.apple.com/message.jspa?messageID=5908432#5908432
Google provides free dns lookup too. There numbers are:
8.8.8.8
8.8.4.4
Robert
=======================================================
I suggest that you try pinging Google.com.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ping -c4 google.com
PING google.com (64.233.187.99): 56 data bytes
64 bytes from 64.233.187.99: icmp_seq=0 ttl=245 time=177.617 ms
64 bytes from 64.233.187.99: icmp_seq=1 ttl=245 time=251.899 ms
64 bytes from 64.233.187.99: icmp_seq=2 ttl=245 time=169.291 ms
64 bytes from 64.233.187.99: icmp_seq=3 ttl=245 time=250.119 ms
--- google.com ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 169.291/212.232/251.899/38.894 ms
mac $ ping -c4 64.233.187.99
PING 64.233.187.99 (64.233.187.99): 56 data bytes
64 bytes from 64.233.187.99: icmp_seq=0 ttl=245 time=176.723 ms
64 bytes from 64.233.187.99: icmp_seq=1 ttl=245 time=247.889 ms
64 bytes from 64.233.187.99: icmp_seq=2 ttl=245 time=176.890 ms
64 bytes from 64.233.187.99: icmp_seq=3 ttl=245 time=244.623 ms
--- 64.233.187.99 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 176.723/211.531/247.889/34.744 ms
mac $
Analysis: If you cannot ping Goolge.com but you can ping 64.233.187.99, then you need to enter you dns address. For some reason Mac OS X sometimes doesn't set the dns. You can set it manually.
apple > system preferences > network
tcp/ip tab and enter address of dns servers
example 162.33.160.100
You will need to use a different number.
PS.
You are a little short on stating results. You state what you did, but I have to guess the result.
Did: X
Result: Y
Did:
1) Power Book's ethernet cable plugged into router port 5. Working to yahoo.com.
2) Unplugged power book's ethernet cable from router
3) Plugged eMac's ethernet cable into port 5.
Result: eMac using Firefox was not able to access yahoo.com
Robert

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Connecting Time Capsule to a Windows 7 PC via Ethernet

Hi,
I have the following network configuration:
- Speedport (Deutsche Telekom AG) as DSL Router (I need that router for the IPTV)
- Connected to this router are two laptops and the Time capsule (WLAN)
Everything is working fine. However, I try now for days to connect my Windows 7 PC via Ethernet to this network via the Time Capsule. Due to location it is not possible to connect the Windows 7 PC directly to DSL Router or to connect the Time Capsule by cable to the router.
I think I tried every possible configuariton but without any improvements. Does anyone have an Idea what I can do ???
Windows is always telling "no identified network" and it always shows a park bench
Hope anyone have an idea ! Thanx for your help
TC - Firmware: 7.4.2

try http://www.microsoft.com/mac/remote-desktop-client
Allan

Filesharing via Ethernet

Similar Messages

Maybe you are looking for