Filesize of 92010NT_CLT.zip ????
Is it really true that the filesize of 92010NT_CLT.zip
(Oracle9i Database Release 2 Client for Microsoft Windows
XP) is 625,558,536 bytes.
I used GetRight to download it, the filesize is
625,543,653 bytes.
No, that looks like an error - you have the correct file size listed here.
We will make sure to refresh this page.
OTN
Similar Messages
-
Download 92010NT_CLT.zip Corrupted
I've tried to download the 9i NT client software (92010NT_CLT.zip (625,558,536 bytes) twice now, and end up with a corrupted file after approx a 2.5hr download.
The indicated data rate is around 60Kbs.
I used different client workstations, one on my office cable modem connection, and one on a client's high speed connection. In both cases the data rate was low (approx 60kbs). However, a quick experiment from another client site, sustained a 260kbs data rate for several minutes from downloa east, although the download could not be completed at that location for non-technical reasons.
Any suggestions to make a successful download more likely would be appreciated.Please try the following direct url: http://otn.oracle.com/software/htdocs/devlic.html?http://download-west.oracle.com/otn/nt/oracle8i/win817client.zip
-
Is the 92010NT_CLT.ZIP a valid ZIP file. I have downloaded it three times and each time WINZIP indicates it is an invalid ZIP file. I successfully downloaded and unzipped disk 1 - 3.
Thanks
John.Please try the following direct url: http://otn.oracle.com/software/htdocs/devlic.html?http://download-west.oracle.com/otn/nt/oracle8i/win817client.zip
-
Cannot download 92010NT_CLT.zip
I'm trying to download the version 9 client for NT/2000/XP but it's saying the file is not found. Is there another way to download this?
I had the same problem. I found another post in this forum that had a link to http://edelivery.oracle.com/ I'm downloading Oracle 9i (9.2.0.1.0) right now.
-
Cannot download Oracle Client 9.2.0.1
Hi,
I'm tring to download the oracle client 9.2.0.1, but when I click on 92010NT_CLT.zip I always receive the message "The page cannot be displayed".
Please let me know if you have some network problem or my Browser configuration are wrong.
Best Regards,
Alfredo Ingenito.I have posted your question in the Downloads Issues. The people who monitor that forum should be able to help you.
Please check this thread for more information:
Not Able to download Oracle Client 9.2.0.1 - ASAP
I apologize for the inconvenience. -
Oracle 9i Client for windows downl;oad
I am unable to download the complete file 92010NT_CLT.zip.
AFAIK, nothing. Download it again. :((
The whole file was not downloaded. So, you will have to start again. -
Hi,
Can i install Oracle 9i Database R2 onto Windows 98SE?
In this link "Oracle9i Database Release 2 Client for Windows 98/NT/2000/XP, do i have to download "92010NT_CLT.zip" for Win98 OR just download Disk1,2,3 on top of the page "http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html"?
ThanksCan i install Oracle 9i Database R2 onto Windows 98SE?No.
Oracle9i Database Release 2 Client for Windows 98/NT/2000/XPThis is just the client installation (SQL Net, SQL Plus, etc) which apparently will work on '98.
Disk1,2,3 on top of the page These are the files for the database which will not work on '98. -
I've tried to download the 9i NT client software (92010NT_CLT.zip (625,558,536 bytes) from:
http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html
twice now, and end up with a corrupted file after approx a 2.5hr download (mean rate of around 60Kbs) on my own cable modem connection, and on my client's high speed connection.
Is there a site from which I can download he the client software at a higher mean bps?Started yesterday one job and at morning its status was TRANSFERRED.
18MB and 12h download time
GUID: {ADD1B985-5FCF-4461-BE8C-196561C283F4} DISPLAY: 'CCMDTS Job'
TYPE: DOWNLOAD STATE: TRANSFERRED OWNER: NT AUTHORITY\SYSTEM
PRIORITY: LOW FILES: 1 / 1 BYTES: 18128896 / 18128896
CREATION TIME: 23.01.2014 18:12:35 MODIFICATION TIME: 24.01.2014 5:31:15
COMPLETION TIME: 24.01.2014 5:31:15 ACL FLAGS:
NOTIFY INTERFACE: UNREGISTERED NOTIFICATION FLAGS: 11
RETRY DELAY: 60 NO PROGRESS TIMEOUT: 2419200 ERROR COUNT: 0
PROXY USAGE: NO_PROXY PROXY LIST: NULL PROXY BYPASS LIST: NULL
DESCRIPTION:
JOB FILES:
18128896 / 18128896 WORKING
http://server:80/SMS_DP_SMSPKGE$/PRI0003A/TortoiseSVN-1.6.16.21511-x64-sv
n-1.6.17.msi -> C:\Windows\SysWOW64\CCM\Cache\PRI0003A.4.System\TortoiseSVN-1.6.16.21511-x64-svn-1.6.17.msi
NOTIFICATION COMMAND LINE: none
owner MIC integrity level: SYSTEM
owner elevated ? true
This job is read-only to the current CMD window because the job's mandatory
integrity level of SYSTEM is higher than the window's level of HIGH.
Peercaching flags
Enable download from peers :false
Enable serving to peers :false
CUSTOM HEADERS: NULL -
I Cannot download the 9i client zip file for win 2000 (92010NT_CLT.zip). I successfully downloaded the 3 server files yesterday but since last night I cannot download anymore. The server keeps returning a bad or no response.
Thanks for your response, will try that link when I get back to that machine. Meanwhile if you are interested in the messages, here is the sequence of non-events:
Went to adobe.com
Clicked on Adobe Reader
Clicked on the Download link (yellow button)
A small window popup window appears, title "Adobe Download Manager," text "Installing Adobe Download Manager" with green progress bar. While the green dots chase each other at the bottom left of the Firefox screen there is a message, "Waiting for get,adobe.com"
After a while the popup disappears and I'm left looking at what I suppose is a trouble shooting window which details problems that may occurr "Depending on your security settings, you may encounter these steps:"
(it's at: http://get.adobe.com/reader/download/?installer=Reader_10_English_for_Windows&a=ARH&a=Air_ Installer&d=McAfee_Security_Scan_Plus&os=XP&browser=Firefox&type=xpi&xpiinstalled=1)
Looking at the add-ons in Firefox Adobe Download Manager is already installed. However, there is no link to downloading Reader X
That's the problem.
David -
Hello all,
I am a beginner in DBMS, so please pardon my ignorance, however silly it may be.
I have started taking classes for SQL from a reputed institute(in India). In practical sessions, we work on this isql*plus 9i environment.
As I need some extra practice at Home, I need to setup up the same. What all things are required for it?
I have downloaded following from this oracle site:
92010NT_Disk1.zip (612,802,971 bytes)
92010NT_Disk2.zip (537,604,934 bytes)
92010NT_Disk3.zip (254,458,106 bytes)
Oracle9i Database Release 2 Client for Microsoft Windows 98/2000/NT/XP
92010NT_CLT.zip (625,543,653 bytes)
I donot know what do to next, How do you set up a server? client? anything else?
What are the required settings?
Sum up all, I want a something where I can run/save my sql statements, just a begineer thing like create a table, update a table, do some query..Please help me out setting an environment....1. You dont need the client installation as client is part of server installation.
2. Use documentation (installtion guide), it will help you in your first steps: http://download-uk.oracle.com/docs/html/A95493_01/toc.htm -
Oracle9i Database Release 2 Client for Microsoft Windows 98/2000/NT/XP
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name - N/A
- Filename:
http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip
- Date/Time
17.00 GMT 27/09/02
- Browser + Version
Internet Explorer 5.5
- O/S + Version
Windows 2000
- Error Msg
Keep getting page load failure for this software. Is the page down, or is it just getting a lot of hits? I need to get this file asap, but don't have ability to download via SAC during specified hours (i.e. out of office hours here in UK)have you try to download it by using Downloader such as DAP or FlashGet.
Because if you use those application they can continue the rest of the downloaded file -
I am from the HP3000 world and am new to the oracle world. I want to enter and execute Oracle PL/SQL and SQL statements so as to become familiar with Oracle SQL. That is, build database tables, insert data, and retrieve the data directly and thru views, etc.
The download and install of Oracle9i Database Release 2 for Microsoft Windows 98/2000/nt/xp via the 92010nt_clt.zip file onto my pc seemed to complete successfully. I have Windows xp on my pc.
When I start SQLPlus Worksheet, a dialog box comes up with questions for which I do not know the answers.
The dialog box wants login option (1. login to the oracle management server, or 2. connect directly to a database), username, password, service, and connect&as (normal, sysdba, sysoper) responses.
During setup, as best as I can recall, there were no requests for, or displays of, this information.
Any suggestions on how to determine (or generate) the correct answers to the dialog box input requests ?
Any help provided would be greatly appreciated.You can configure the client using the Net Easy Config tool which will create/modify the existing TNSNAMES file contents.
TQ,
M M Sheriff -
Use of getright to download oracle software
hi
due to problems at our isp, i cant download oracle software complete !
i want to use getright to resume download after a not completed download, but
getright cant download it.
for example, the newest client for windows:
http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip
added in getright i got the following log:
-----StartRequest---------------2002/06/07-09:48:13-----
Connecting to: download.oracle.com (via 192.168.0.1)
!!!! ----Header Sent----
GET http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip HTTP/1.1
Host: download.oracle.com
Range: bytes=0-
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; Q312461)
Accept: */*
Cookie: ORA_UCM_VER=%2FMP%2F8r_xbctgj55MP%2F8p%5Dv%60areh33MP%2F8%2F26%2C65%2C7%2C22MP%2F8-04*43*5*00; ORA_UCM_INFO=2~7A7FCC372D8727CAE034080020CB1B7C~xxxxx~xxxxxxxx~xxxxxxxxx~DEU~de~1~/2/~1~null~1; ORA_UCM_SRVC=2*OTN~1~0~//~null~*GMO~1~0~//~null
Pragma: no-cache
Cache-Control: no-cache
!!!! ----Header Recv----
!!!! Disconnected...Retrying
when i use wget for linux i got the following log:
wget http-user=xxxxxxxxx http-passwd=xxxxxxxxx --load-cookies=/mnt/oracle/tmp/1
http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip
--11:25:08-- http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip
=> `92010NT_CLT.zip'
Auflvsen des Hostnamen ;download.oracle.com+.... fertig.
Verbindungsaufbau zu download.oracle.com[213.35.100.1]:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 302 Found
Platz: http://download-uk.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip[folge]
--11:25:09-- http://download-uk.oracle.com/otn/nt/oracle9i/9201/92010NT_CLT.zip
=> `92010NT_CLT.zip'
Auflvsen des Hostnamen ;download-uk.oracle.com+.... fertig.
Verbindungsaufbau zu download-uk.oracle.com[213.35.38.54]:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 302 Found
Platz: http://profile.oracle.com/jsp/realms/otnLogin.jsp?remoteIp=213.6.3.125&globalId=&redirectUrl=http%3a%2f%2fdownload-uk.oracle.com%3a80%2fotn%2fnt%2foracle9i%2f9201%2f92010NT_CLT.zip[folge]
--11:25:09-- http://profile.oracle.com/jsp/realms/otnLogin.jsp?remoteIp=213.6.3.125&globalId=&redirectUrl=http%3a%2f%2fdownload-uk.oracle.com%3a80%2fotn%2fnt%2foracle9i%2f9201%2f92010NT_CLT.zip
=> `otnLogin.jsp?remoteIp=213.6.3.125&globalId=&redirectUrl=http%3a%2f%2fdownload-uk.oracle.com%3a80%2fotn%2fnt%2foracle9i%2f9201%2f92010NT_CLT.zip'
Auflvsen des Hostnamen ;profile.oracle.com+.... fertig.
Verbindungsaufbau zu profile.oracle.com[148.87.9.202]:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 200 OK
Ldnge: nicht spezifiziert [text/html]
[ <=> ] 3,947 10.17K/s
11:25:11 (10.17 KB/s) - ;otnLogin.jsp?remoteIp=213.6.3.125&globalId=&redirectUrl=http%3a%2f%2fdownload-uk.oracle.com%3a80%2fotn%2fnt%2foracle9i%2f9201%2f92010NT_CLT.zip+ gespeichert [3947]
thx for your help
pbok i solved the problem.
thx -
Error on importing cimsap.zip
Hi experts,
I have upgraded my portal to EP 7 SP 14. I am trying to configure DI. When I try to import cimsap.zip, I am getting following errors. CR_Content.zip is successfully imported. Has anybody faced this problem before? Please help.
One more thing is I am able to access CMS,CBS, DTR,SLD webguis. but devinf page is not opening. Any clues?
Regards,
Mehul
Error Message:
Import finished with 73 errors: 906 of 979 objects loaded
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_Namespace.Name
SAP_Namespace
CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_ManagedType.Name
SAP_ManagedType
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterfaceHi Mehul,
try to go to the administration page of the SLD and choose for profile. In here select the option 'objectmanager'. Here set the following settings:
BufferInstances -> false
RejectUnsupportedCIMQualifiers -> false
StrictModifyClassChecks -> false
after this save the settings and stop and start the SLD from within the SLD itself. Then re-import the CIM model and the contect (so both CIMSAP and the CRdelta).
This should solve the error messages (I had the same issue before).
Regards,
Nico...
P.S. Please put the question on solved if this solves this issue for you as well to help other people with the same problem. -
Filesize a problem when uploading a file to Oracle via JDBC?
Hello,
I am trying to upload a file via JDBC to an Oracle Database (into a BLOB field). The file is converted to a byte array for uploading.
While processing the request the following error is thrown :
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R Caused by: java.sql.SQLException: Datengr��e gr��er als max. Gr��e f�r diesen Typ: 485323
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at java.lang.Throwable.<init>(Throwable.java)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at java.lang.Throwable.<init>(Throwable.java)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at java.sql.SQLException.<init>(SQLException.java:52)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.ttc7.TTCItem.setArrayData(TTCItem.java:95)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.dbaccess.DBDataSetImpl.setBytesBindItem(DBDataSetImpl.java:2414)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.driver.OraclePreparedStatement.setItem(OraclePreparedStatement.java:1134)
[31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr R at oracle.jdbc.driver.OraclePreparedStatement.setBytes(OraclePreparedStatement.java:2170)
("Datengr��e gr��er als max. Gr��e f�r diesen Typ" means: "Filesize bigger than maximum allowed size for this type")
A blob is able to hold files with gigabyte size, a simple 460k file should not cause this JDBC error. I had a test with a 127k file, too, same error (different file types tested: html, doc, pdf, ...). Is this a problem of the driver or is there anythig I am doing wrong?
Many thanks in advance for your help,
Rommie.My problem is not to retrieve the file but to upload
it. I checked the examples and only saw examples for
retrieving a BLOB or CLOB, but not for inserting it
into the database
Maybe I am blind ... if so, please publish your link
to the example.The page at:
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/advanced/advanced.html
Has a subsection that reads:
LOB Datatype [19-Feb-2003]
The term large object (LOB) refers to a data item that is too large to be stored directly in a database table. This sample application demonstrates how to read and write LOB datatype.The Oracle JDBC drivers provide support for two types of LOBs: BLOBs (unstructured binary data) and CLOBs (character data). BLOB and CLOB data is accessed and referenced using a locator stored in the database table.
Download Now (ZIP, 76KB)
Readme
Source
The zip is a standalone Java application that will create any needed tables, populate them with example data (both LOBs and CLOBs) from the data files in the zip and then put up a Swing gui that will allow you to add additional LOB and CLOB data to the table. Everything is there, the readme explains the 2 properties files you need to edit. The only other thing besides reading comprehension that you need to supply is DB connection information with the necessary privileges.
The Source link is a link to the main code, but does not include all the code in the package. However, it contains the code to write CLOBs and BLOBs into the database.
The Readme explains everything. It also has code excerpts, including the code used to read the sample data from file and write it into the LOBs and CLOBs.
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/advanced/LOBSample/Readme.html
Look for "loadSamples"
Maybe you are looking for
-
OMS is up and running but unable to get the console page through web browser
Hi All, I have a wierd issue here. I have my OMS running successfully, but I am not able access it through HTTPS connection in web browser. My version of OEM is 11.1.0.1 It was working till yesterday, I am not sure what happened suddenly that its n
-
After some years of faithful service my PC died and I am not able to get Premiere Pro 1.5 to work on the new PC. I had several HDD with my video files on and the C: drive died. I have reinstalled the original drives so all my files are recovered and
-
Steady Stream of "Searching for movie data in the file..." Error Messages
My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found.
-
Qosmio PX30t-A-119 is not connecting to WLAN
My PC keeps telling me no connections are available. My router is on and my phone &'iPad can connect to it but my Qosmio can't. I managed to connect it via an Ethernet cable but when I removed it it still can't pick up any broadband signal. Any ideas
-
Planning layout - not executeable anymore
Hello, I have changed a planning layout. In detail: I changed the heading of two columns. Not more. Then I transported the layouts. When I execute WebInterface I receive following error message: "The environment has changed. Layout is not executeable