Filespace Available Metric in Grid Control with CDROMs mounted
I getting tried of filespace available alerts being generated against cdrom drives on our Sun Server. Is there are way for Grid to ignore cdroms that are mounted.
You should be aware of the following:
When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
The alert should then be shown as soon as your UDM thresholds values are reached.
The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
If you don't see this, then there is something wrong with you UDM definition.
If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
Regards
Rob
http://oemgc.wordpress.com
Similar Messages
-
Userdefined metrics in grid control with OEM
Hi,
i created a user defined metric to check the size of perticular tablespace, as for that
i wrote a query like select bytes/1024/1024 from dba_data_files where tablespace_name like 'tablespacename'
my query is giving output :100mb
i gave the threshold values like operator= '=', warning = '100', critical = 110. to tset my alert will fire or not
iam not specified any response action for this,
when iam testing it willcollect the value is 100mb, successful.
but my alert is not firing.
can anybody help me out regarding this issueYou should be aware of the following:
When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
The alert should then be shown as soon as your UDM thresholds values are reached.
The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
If you don't see this, then there is something wrong with you UDM definition.
If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
Regards
Rob
http://oemgc.wordpress.com -
11g Grid Control with Dataguard
Hi ,
I need to configure a 11g Grid Control with Dataguard for the repository, are there any documents that i can follow for configuring the dataguard
for the Grid Control 11g, I am interested as how i would be setting up the tns entry in the OMS , since i had to do the failover / switchover etc of OEM Grid Control application across the standby .
Kind regards
KrishHi,
Please follow the document provided below:
How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
Let me know, if you are looking for the same document.
Best Regards,
Venkat -
Suggested concept for Grid Control with DataGuard solution
Hello,
I want a Disaster Recovery solution for OEM Grid Control with DataGuard but with only one OMS running. (11.1)
I have figured out the following.
Installation OEM Grid control om host A. Repository is created on Host A. Connection to database is done thru servicename DBGRDSRV on Host A
Installation OEM Grid control om host B. Repository is created on Host B. Connection to database is done thru servicename DBGRDSRV on Host B
I stop OMS on host B and I drop the database on Host B
Then....
I create a Dataguard configuration for DBGRDSRV, the prim database run on Host A en secondary on Host B
In case of a failure i switch the database. On host B i will have DBGRDSRV as the primary database
I start OMS on host B and the agent.
In case the failure is resolved i switch back eveything
Will thos concept work?
Do i get some troubles with the emkey, and if so, does anybody has a solution for this?
Any help is appreciated
Regards,
Jaap
Edited by: user9956284 on 28-jul-2011 10:44Hi,
Please follow the document provided below:
How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
Let me know, if you are looking for the same document.
Best Regards,
Venkat -
Hello all,
We are working with CDB 10.2.0.0.0 and the GRID CONTROL AGENT 10.2 is installed so we would like to know some best practices, experiences, implemented tests,... that you can share after working with these products. Our aim is to have a large set of metrics so we can choose the most interesting ones.
In other words, we would like to get more metrics than the default defined ones. So we need people that have worked with the products to share their experiences.
Could you share some info with us (like custom SQL metrics)?
Particularly, we are interested in metrics like:
· Total size grouped by folder (all subfolders included)
o Consumed
o Allocated
· Total size grouped by library
o Allocated
· Web Services response time
o Of downloading a document
o Of getting the document info
o Of uploading documents
o Of searching a document
· DB response time
o Of downloading a document
o Of getting the document info
o Of uploading documents
o Of searching a document
· Get the status of an agent
· etcetera...
I used the sqlarea to get some metrics from WS calls. Do you have any advice for getting custom sql metrics?
Thanks in advance for your help.
Best regards.Some numbers can be found in the documentation :
http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm
Though I use more than 2 GB for the OMS installation (AIX).
You may also want to read Metalink note 375509.1 on agent resource consumption :
http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=375509.1 -
10gR2 Grid Control with previous Agents?
I have 10gR2 Grid Control installed on a Linux Server. I want to use it to create a DataGuard standby database. The issue is that the primary database is 10gR2 on a HP-UX server using ASM and the standby database will also be 10gR2 on a HP-UX server using ASM. Will the 10gR2 Linux Grid Control be able to handle this since the agent on the primary will be 10.1.0.4? Note: 10gR2 is available for HP-UX but 10gR2 Grid Control is not yet available so that is why I have 10.1.0.4 agent.
Yes , it is able to handle
-
Is it possible to create user defined metrics in Grid Control 10.2.0.1 ?
Hi,
Is it possible to create user defined metrics(my SQL statement) in Grid Control 10.2.0.1
(not 10.2.0.3) Linux/AIX ?
ŁukaszI am not sure if I am correct, but for reasons best known to them, Oracle replaced rather than add.
Even if you want to do a smart search using the part# (e.g B16242-03) in oracle.com, you get a whole list of results, but when you click on them, you get http://www.oracle.com/errors/404.html
I found this copy http://www.oracle.polcreate.pl/em.102/b16242/toc.htm -
Does Anybody have some information about grid
control/oracleSpreadTable with combo list instead of text cell.
Please help!!
nullAs curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error. -
I've just installed Oracle Express Edition and looks great. Can i connect it to a management server (grid control)?
As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error. -
Installing Grid control with existing IAS
Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?
yes u can install Grid control into existing Application Server installation
-
We've just purchased OEM. We plan 2 installs - one on a development server to monitor development dbs, the other a production server to monitor production dbs. Our technical group wants me to install it on one Windows 2003 Server using vmware giving me 2 virtual servers. This way they only have to purchase 1 physical server yet I get the 2 installs I want. Oracle support said they wouldn't support this type of install.
Has anyone done this?Yes, I have exactly the same setting. Works like a charm, but it does need some hefty resources. As this is only a test setting on my laptop I do not expect much support.
Maybe you should not mention that you run this on vmware when you have a support question ;-)
cu
Andreas -
SSO and EUS with EM Grid Control
Trying to configure both SSO using client certificate authentication process and Enterprise Users, I noted that the parameter used to configure both is the same (oracle.sysman.emSDK.sec.DirectoryAuthenticationType) in emons.properties.
Can I use both SSO and EUS with EM Grid Control???Hello
i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases? -
Alert Log File Monitoring of 8i and 9i Databases with EM Grid Control 10g
Is it possible to monitor alert log errors in Oracle 8i/9i Databases with EM Grid Control 10g and EM 10g agents? If yes, is it possible to get some kind of notification?
I know that in 10g Database, it is possible to use server generated alerts, but what about 8i/9i?
Regards,
MartinHello
i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases? -
Fail to search Oracle Application Server while installing EM Grid Control
Fail to search Oracle Application Server while installing EM Grid Control 10.2.0.2 on Windows XP. All the steps are successful except the last step failed.
I uninstalled the previous Oracle 10g database using the stops of the following link:
http://krsethur.wordpress.com/2006/06/13/uninstalling-oracle-10g-manually-from-windows-xp/
Now I install EM Grid Control with a new database.
I don't have any MetaLink account now.
The log massage from G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Command: oracle.sysman.emcp.agent.AgentPlugInThe log messages from C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43...
Starting Agent
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception:
Management Agent Configuration Assistant is failed.
The following failed messages are recorded:
configureAgent: Search on a non-RAC system: Fail to search Oracle Application Server.
Info: Configuration Assistant "Agent Configuration Assistant" is fail.
*** Starting OUICA ***
Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\
configToolFailedCommands file, backing it up
Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed
Commands.bak
Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry
Configuration Assistant.
...I check all the related service and I can see all the related service are up except that the status of Application server is not running and the OracleCSService is in the starting status all the time.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.2.0
OMS Version : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home : G:\OracleHomes\agent10g
Agent binaries : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL : https://host1.localdomain:3872/emd/main/
Repository URL : https://HOST1:1159/em/upload
Started at : 2009-12-27 19:02:04
Started by user : SYSTEM
Last Reload : 2009-12-27 19:02:04
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 4
Size of XML files pending upload(MB) : 0.04
Available disk space on upload filesystem : 41.63%
Last successful heartbeat to OMS : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.Sorry, it's my mistake. what I am installing is Grid Control 10.2.0.2.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.2.0
OMS Version : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home : G:\OracleHomes\agent10g
Agent binaries : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL : https://host1.localdomain:3872/emd/main/
Repository URL : https://HOST1:1159/em/upload
Started at : 2009-12-27 19:02:04
Started by user : SYSTEM
Last Reload : 2009-12-27 19:02:04
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 4
Size of XML files pending upload(MB) : 0.04
Available disk space on upload filesystem : 41.63%
Last successful heartbeat to OMS : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.Edited by: junez on Dec 27, 2009 4:18 PM -
Grid Control showing excessive amount of disk utilization.
Hi Folks,
I understand that Oracle doesn't support their products 100% on non Oracle VMs, but I thought I might take a stab at it.
I decided to stick with a simple installation of Oracle Grid Control running on a Windows 2003 R2 32 bit os, here are the steps I took.
1. Run Guest OS Windows 2003 R2 32 bit on a Windows 2008 x64 running Hyper-V (Yes I know why not EL5 running XEN, long story)
2. Install Grid Control with Database and Agent versions 10.2.0.2.1
3. Patch agent and oms to 10.2.0.5.0
4. Some minor issues, but managed to get by those.
- First off EM Website shows down, got to take a look at that, probably need to fix the beacon, not sure!
Problem:
- Grid shows that the host running em is over 100% disk utilization.
- According to Metalink this is a known bug in Windows 2000 Performance Counters (not 2003?)
- More specially Microsoft KB article Q310067.
- Metalink Doc Id: 303788.1
- Note, I'm running 2003 on a Hyper-V Guest, so anything can go wrong!
The specific error is:
Metric Disk Device Busy (%)
Disk Device 0 C:
Severity Critical
Alert Triggered Jun 3, 2009 7:57:54 PM
Last Updated Jun 4, 2009 3:48:48 PM
Acknowledged No
Acknowledged By n/a
Message Disk Utilization for 0 C: is 587.86%, crossed warning (80) or critical (95) threshold.
More info:
- Guest is running on a Dual Quad Core Xeon System with 16 GB of RAM
- Guest has dedicated 4096MB of ram
- Guest has dedicated 2 CPUS
- Guest is configured with a Virtual Disk (specifically partition c:\) to be on local Hyper-V disk array
- Windows 2008 Hyper-V host disk array is in a RAID 5 configuration running 10k SAS drives
- Windows 2008 Hyper-V host utilization is literary at most 5% (current is 1%)
- Windows 2008 Hyper-V disk utilization according to graphs is showing 100KB/s usage (less than 1%)
Temporary solution is to turn off the metric, but not sure if that's such a good idea.
- Note that 11g EM and 10g EM running on Hyper-V server had the same issue.
- Note that 11g EM and 10g EM running without visualization had no issues.
Any thoughts?It may be related to Bug 8677212: BACKUP INFORMATION FOR SOME DATABASES SHOWS INCORRECTLY
Although bug info says it for HP-UX, I've also seen the same problem on Grid Control 10.2.0.5 running on Solaris.
You may want to apply 10.2.0.5.4 Grid Control Patch Set Update (PSU) [ID 1139563.1] to fix it.
Best Regards,
Gokhan Atil
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks
Maybe you are looking for
-
IPod not found by PC or iTunes
Hi, My sons ipod has always worked well. Suddenly, it is not recognised by itunes or the pc - windows xp. I took it to the apple shop where they conncected it to their pc and it instantly tried to sync but my pc wont find it in device manager or anyw
-
Submit By Email Doesn't Launch Outlook 2010 as Default Mail Client, though Outlook is properly set a
A form designed in LiveCycle Designer with a Submit By Email button, doesn't launch Outlook 2010 (Standard Edition) when clicked, although Outlook is properly configured as Default Mail Client. Checked with Microsoft and followed all proper steps ye
-
Editable column in tree with columns
Hello, Im constructing a tree with columns with CL_GUI_COLUMN_TREE class and I want to set one of the columns as text type and editable. ¿Do you know how? If I could do it with another class I would also be glad to try it. Thanks.
-
Hi! Its very nice. Plz give me the solution for the following problem -- Plz find the attached vi ( 1. main 2. Mouse over is sub vi of "main") I want to make controls on my front panel mouse sensitive. I have one vi (Mouse over) which full fill my re
-
Goes to 'nothing selected' mode when editing tables entries? (Sometimes)
When trying to edit entries in table cells pages sometimes flips into 'nothing selected' mode and return to the top of the table leaving the cell entry partially changed. This can happen anytime during the typing of characters to replace other text.