FileStatsAgent Metadata.framework [Error]: couldn't get the client port
11/7/13 6:13:42.507 PM FileStatsAgent[75343]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:13:55.026 PM FileStatsAgent[75347]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:14:09.915 PM FileStatsAgent[75348]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:14:22.726 PM FileStatsAgent[75349]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:14:37.792 PM FileStatsAgent[75350]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:14:52.650 PM FileStatsAgent[75352]: Metadata.framework [Error]: couldn't get the client port
11/7/13 6:15:06.098 PM FileStatsAgent[75353]: Metadata.framework [Error]: couldn't get the client port
This console message is repeating, non-stop, every 15 seconds.
Anyone have any suggestions to make it stop?
It seems the problem was a broken database Spotlight.
That's what helped me:
sudo rm -rf /.Spotlight-V100
cd /System/Library/LaunchDaemons
sudo launchctl load -w com.apple.metadata.mds.plist
That will start the re-indexing your hard drive to Spotlight.
From https://discussions.apple.com/thread/2760349
Similar Messages
-
Hi,
Received a pdf by email. When I attempt to open it, I receive the message, "File Error- Couldn't open the file", is there any way I can open it?
Thanks,
GrahamAre you using Adobe Reader or Preview to view the file? Can you get the sender to resend the file?
Cheers, Tom -
Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
However, when I print from Safari or another program, I have no problems
== YesterdayThe only solution to corrupted files is to restore from your back up.
Regards
TD -
I get an Internal LR/Gmail error "Couldn't get 'My Contacts' group id". Could this be due to a Gmail password change and if so how do I rectify it?
Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks. -
Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?
Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully
Have you tried resetting your iPod: Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~ -
I couldn't get the blurry letters to take even though I entered them right. So I checked the help button. But, no one has responded. I tried to go back into the sync screen but it says my email address is invalid. How can I set up my mobile?
Not sure if this helps:-
The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work. Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple Store and explain that they were gifted to you and ask how you can use them. The best way to gift music files is to buy the gift tokens and give these. Hope above helps. -
How to get the WD port number of the actual system?
Hello everybody,
In my application I'm calling a Sap Gui transaction through an ITS WebGUI link that is generated dynamically by an action method. Works find so far.
However, as the code has to run on various systems (development, test, production) I also have to generate the system and port name dynamically. System name is no problem, but how can I get the WD port of the actual system? Is there any method or variable for that? Couldn' find anything so far...
Thanks in advance for any help!Hello,
As Thomas mentioned, you have to use the utility class to construct the URL for any application.
you have two options here
Option 1 -> Prefix your generated WebGUI link with '/' and pass it to the method CL_URL->HOST in the URL parameter. this method will prefix the corresponding http:<host>:port to the passed in URL.
Option 2 -> you can directly use the method CL_URL->ITS to generate your entire web GUI link.
BR, Saravanan -
Want to get the Client Machine name from Oracle Forms
Hi,
I want to get the Client machine name from the Oracle Forms.
I have attached web_util.pll.
I use user_name := webutil_clientinfo.get_host_name;
but i am getting following error - WebUtil Error:WUC-015: Your form must contain the following Bean for this function to be available: oracle.forms.webutil.clientinfo.GetClientInfo.
Can any one help me in this!
Thanks & Regards,
Avinash Bhamare.
Pune.Hi,
I have written the code on when-button-pressed trigger of a push button -
DECLARE
user_name VARCHAR2(50);
BEGIN
user_name := client_win_api_environment.get_computer_name;
message('user_name is :'||user_name);
message('user_name is :'||user_name);
END;
And on clicking on this button i am getting error -
frm-40734:Internal Error:PL/SQL error occurred
Can any one help in this asap please!
Thanks & Regards,
Avinash. -
How to get the client date and time ?
Dear Sirs...
Using jdeveloper 10.1.2.0
How can i get the client date and time using the HttpServletRequest ?
thanks for any help in advance
best regardsIf your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
Ronald -
How to get the client identity from the certificate at server side
hi, this is ravi kiran,
I am working on a project which requires, receiving a signed file from the client side and verify whether the file is signed by a valid certificate that is there in the servers keystore.
How can i get the client certificate at server side and check with the certificates already present in the servers keystore.
i have no idea how to do this
can any one help me
thanx in advanceHi Ravi, did you get any answer to your question ?
I'm also after a similar problem, please share your solution, if you have any. -
How to get the CLIENT OS USER NAME using Apex
Dear All,
I know there are many other posts (some of them are very old) discuss about this issue. But unfortunately most of the posts endup with NO PROPER ANSWER. But still I believe that tehre has to be some way to do this. So this is my requirement.
I am using custom authentication module and I want to get the CLIENT MACHINE OS USER NAME for that. But I do not want to do any authentication against the client user domain.
How can I get this?
* There are some other way to get this using VB Scripts. But thats not a real solution for this due to followings
01. User has to manually allow to run VB scripts. So if user dissable that then we canot get the required info
02. Its working only with specific browsers(Mainly in IE and also we can get that thing work after installing plugins to Firefox.). So this is also depends with the bvrowser and plugings.
What I want to do is to get this info using a common way which is not depends with the browser or any thirdparty plugins.
Thanks,
AlexIts good that you did some searching in the forums before you posted the question.
Most modern browsers would consider what you require as a security/privacy issue and prevents such information from being transmitted available(easily). IE might let you pull out this using a VB script or activex control. Browser specific addons/extension could work but they need some kind of installation to start with. Java could be a way to do it with all browsers, but the end user still has to grant access before it can do any such thing.
Lets say you were able to pull out such information from an end user, what would be next, get his mail id from outlook ? , access his browsing history, steal credit card information or read cookies?
Add to that , what if the end user accesses it using any other OS(linux,macintosh or even a smartphone) ? what about windows vista and windows 7 OS's , are you going to write code to handle all those cases too ?
Here's a blog posting which explains using NTLM authentication with Apex(it still needs configuration from the end user)
What I want to do is to get this info using a common way which is not depends with the browser or any thirdparty plugins.I guess if this is the question, then the answer would have to be no. I don't think you will be able to find a method that passes this information from the client side without any modification/configuration at their side -
Hello everybody, I'm a student new with java, I'm developing a little server application - running standalone, and I'm trying to get the client Ip address, have a look on my code snippet:
InetAddress fromcli;
while(true){
welcomeSKT.accept()
fromcli = welcomeSKT.getInetAddress();
System.out.println("The client Ip Address is: " + fromcli.getHostAddress() + '\n');
The sysout println returns the 0.0.0.0 that is the server address, mapped to more than one interface eg:(loopback and eth0) - But if with the getInetAddress() method I get the server address where is the difference with the getLocalHost()? - By the way, anyone has a suggestion to print out the client remote address.
Thank you in advance....
Jeppojeps
Edited by: jeppojeps on Mar 24, 2008 3:36 AMOh, sorry of course welcomeSKT is a ServerSocket, actually the snippet that I put is a part of the code, here below I put the complete program, in order to clarify my question, however I would like to know if it's possible to understand from the server side the client IP address, and if yes how...
Thank you in advance...
* THIS simple TCP server receives some numbers in input by the client and give back the sum - actually the exceptions are managed in a uncomplete way....but this is my first java program...be patient with me...
* @jeppojeps
* @0.1
import java.io.*;
import java.net.*;
public class ServerTCP
// instance variables - replace the example below with your own
public static void main(String[] args) throws Exception
String clientSentence;
String capitalized;
InetAddress fromcli;
String clientIp;
String portIp;
int z=0;
int port=0;
if (args.length == 0 ){
System.out.println("Usage: ServerTCP lport" + '\n');
System.exit(-1);
else
port = Integer.parseInt(args[0]);
if(port <= 1024) {
System.out.println("Remember dude, only root can use a portnumber < 1024" + '\n');
else{
ServerSocket welcomeSKT = new ServerSocket(port);
System.out.println("Server instance started:" + '\n');
while(true){
Socket connectionSocket = welcomeSKT.accept();
BufferedReader InfromClient = new BufferedReader (new
InputStreamReader(connectionSocket.getInputStream()));
DataOutputStream outToClient =
new DataOutputStream(connectionSocket.getOutputStream());
outToClient.writeBytes("Hello give me some numbers and I'll give you the sum" + '\n');
fromcli = welcomeSKT.getInetAddress();
System.out.println("The client Ip Address is: " + fromcli.getHostAddress() + '\n');
clientSentence = InfromClient.readLine();
for(int i = 0 ; i < clientSentence.length() ; i++) {
try {
Character c = new Character(clientSentence.charAt(i));
capitalized = c.toString();
int x = Integer.parseInt(capitalized);
System.out.println("Number digited from the client: " + x + '\n');
z+=x;
catch(NumberFormatException nfe) {
System.out.println("Text: " + clientSentence.charAt(i));
capitalized = Integer.toString(z);
outToClient.writeBytes("The sum of the given number is: " + capitalized + '\n');
welcomeSKT.close();
} -
Get the client (caller) IP in a RESTFul web service resource
Hello,
How i can get the client (caller) IP inside a RESTFul web service resource?
Something like for SOAP Web Services
MessageContext msgCtxt = wsCtxt.getMessageContext();
HttpServletRequest req = (HttpServletRequest) msgCtxt.get(MessageContext.SERVLET_REQUEST);
String clientIP = req.getRemoteAddr();
Thank You1) Are you trying to create a RESTful web service in LabVIEW?
or
2) Are you wondering about creating a thin client to consume the web service?
A1) Web Services in LabVIEW
A2) LabVIEW WebUI Builder You can create a VI to act as a client for your web services, but not a thin client (i.e. running in the browser)
Chris
Certified LabVIEW Architect
Certified TestStand Architect
Maybe you are looking for
-
Trouble with JVC GY-HD100: trying to capture in DV NOT HDV
Hello all! First let me say I am a long-time reader of these boards and they have saved me on many, many occasions. However, this is my first post! I have used FCP for over 6 years with my trusty Canon XL1 and XL1s with relatively few issues. I recen
-
File Content Conversion on the Sender Adapter in PI 7.1
Hi Experts I am working on a file to Proxy scenario where my file is fixed format length which will have only one Structures (Details Records) that would be coming from the text file but in the message type I have delcared Header, Detail , Trailer, H
-
Is it possible to delete a relationship from the BP ?
Hello experts, I'd would like to replace a function partner SH (having the same number as the DO) by another from R3 to CRM5. At the begining i have in R3 this partner AG 3901007 RE 3901007 RG 3901007 WE 3901007 In R3 by the transaction VD02, I repl
-
Problems transferring multiple files
I'm trying to write a program to transfer multiple files from a client to a server, but I'm having trouble getting the server to distinguish between them. I have tried both buffered streams, and straight input/output streams, and in both cases, the s
-
The App Store screen is way off to the right so I can't access it. It has the little spinning wheel I can see when I swipe up to see what's open. It won't close. Should I try to force it? How much more time should I give it? I did just give Google so