Filesystem type

Hello all! I want to see the filesystem type of a partition for example (ntfs) in java. Is this possible in java?
Cheers!

Calin wrote:
Hello all! I want to see the filesystem type of a partition for example (ntfs) in java. Where / how do you want to see this?
Is this possible in java? http://en.wikipedia.org/wiki/Turing_complete

Similar Messages

  • Can't boot after system update: unknown filesystem type

    After running a system update, including updating the kernel, I can't boot to the new kernel.
    On booting, grub loads the kernel image, runs/loads udev, but then fails to mount the root partition with error:
    mount: unknown filesystem type 'ext4'
    I have tried reinstalling the 'linux' package via packman several times, also trying the --recursive argument to make sure all my dependencies were there, and after days of googling and tweaking my system, I'm at a loss.
    Thank goodness I happened to keep a spare kernel laying around in /boot.
    Thanks in advance.
    Last edited by jackrabbit (2012-03-22 23:25:28)

    The OP can read their partition initially though, it's only after udev that they can't.
    Also, try adding "rootfstype=ext4" to your grub kernel line. Is your /boot on a separate partition or part of your / partition?

  • ERROR: /dev/archiso found but the filesystem type is unkown

    My problem is now solved in the previous thread on this topic.  I apologize for a double post!  The previous topic was marked [Solved] and I assumed no one would respond there.
    I had the problem trying to boot from usb: boot device not showing up after 30 seconds and thrown into ramfs$.  The other topic w/ this problem is marked solved so I'm posting my problem again (sorry).
    cat /proc/scsi/scsi shows that device is detected...
    did:
    ln -sf /dev/sdb1 /dev/archiso
    and logged out ("exit")
    but immediately a new error, and kernel panic, so I can't copy/paste output:
    "ERROR: /dev/archiso found but the filesystem type is unkown"
    Sorry about ridiculous pic but it does show kernel panic, just trying to help... couldn't copy output.  I can post dmesg from prior to kernel panic if you want (but it doesn't include errors).
    Thank you for your help.
    I just did:
    cat /lib/udev/rules.d/00-archiso-device.rules
    ACTION=="add|change", SUBSYSTEM=="block", IMPORT{program}="vol_id --export $tempnode"
    ENV{ID_FS_LABEL_ENC}=="ARCHISO_OINGAE2I", SYMLINK+="archiso"
    "SYMLINK+=" ... is "+=" typo?
    Last edited by jaf777 (2009-08-12 17:13:36)

    Same issue:
    The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
    You mention "Sounds like the client system doesn't have an Oracle client installed."
    I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
    What is the right client? Where do i get it?

  • Determine filesystem type - EXT2, FAT32, NTFS, or other

    Is it possible to determine file system type (EXT2, EXT3, FAT32, NTFS or other types) of the host media hard drive/USB key in Java?
    Best Regards,
    Karthigan.

    [email protected] wrote:
    I wrote a back up application. It works great if I am backing up data from NTFS to NTFS or FAT32 or FAT32 - basically across same filesystem types. If I run the same backup application from NTFS to FAT32 media, files that need not be copied over get copied over unnecessarily - because the timestamp accuracy/format of NTFS is different from FAT32. It just is not very appealing if files get copied over for no reason due to timestamp variation across filesystems. I was hoping to see if there was a way around it. The trick in this case might be to create a file on the target volume, set its last-changed date to a certain value, then read back its last-changed date and see whether you get back what you consider to be a date lacking in accuracy. Then instead of comparing an accurate date to an inaccurate date, and doing unnecessary work, you could apply some kind of algorithm to the accurate date to apply the inaccuracy before comparing the two dates. Or something like that.

  • AIM-CUE - Filesystem type unknown ?

    Hi there,
                  I am studying IIUC and I am up to the CUE module. Im pretty sure I have done something stupid. I removed the 1GB CF from the AIM-CUE module, put it in my 2801 CF slot and did a format flash: (I dont know why, I just thought it would let me start fresh ) . Now when the AIM-CUE goes through the boot process I get the following output.
    Initializing memory.  Please wait....
    256 MB SDRAM detected
    BIOS Version: Cisco SE-AIM 01.02
    BIOS Build date: 08/14/03
    System Now Booting ...[BOOT-ASM]
    Filesystem type unknown, partition type 0x1
    kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    kernel_func: kt: 0
    in boot func: kt: 0ÿ
    I can get into the bootloader and use the boot helper to re-install the CUE files, but I guess if they are on the wrong filesystem type they are useless.
    I have searched around and it looks like I need to have the "Filesystem type is reiserfs, partition type 0x83".
    Now the only way I can see to re-format the flash to the reiserfs file system is the put the 1GB CF into a card reader and format it with my PC. Im going to give it a try now, but I also read somewhere there needs to be 2 partitions, however Im unsure what size each partition should be.
    This is a second hand AIM-CUE so I dont have any support for it. Have I rendered my AIM-CUE useless, or is there a way I can dig myself out of this hole I have created ??
    Thanks in advance.
    JP

    Thanks for the reply paolo, however the boot loader / boot helper is the problem. Ive managed to get the right filsesystem type however now its stuck in this constant loop
    Initializing memory.  Please wait.
    256 MB SDRAM detected
    BIOS Version: Cisco SE-AIM 01.02
    BIOS Build date: 08/14/03
    System Now Booting ...[BOOT-ASM]
    Please enter '***' to change boot configuration:
    Filesystem type is reiserfs,partition type 0x83
    kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=aim
    in grub_open1: /bzImage root=/dev/hda1 ro plat=aim
    in grub_open2: /bzImage root=/dev/hda1 ro plat=aim
    in grub_open3: /bzImage root=/dev/hda1 ro plat=aim 1
    in grub_open4: /bzImage root=/dev/hda1 ro plat=aim
    kernel_func: kt: 0
    in boot func: kt: 0ÿ   <--when it gets to here it goes back to the "Initializing memory.  Please wait." and just keeps looping.
    Any ideas why boot helper keeps looping like this ??
    EDIT: Now I am getting "Not a cisco supported CF. Please use cisco supported CF and reinstall the software. System Halted"
    Im guessing the CF may have been on its way out and now it has gone faulty ?

  • [SOLVED] mount: unknown filesystem type 'ext2'

    I probably have the most complicated first-time arch setup that you'll ever hear a n00b post.  XD
    I just finished setting up an encrypted arch box with a usb boot drive (it contains the key-file), but when I go to boot, the system reports the following:
    mount: unknown filesystem type 'ext2'
    Of all the things to break!  Ext2???!
    This is for the default boot mode, when boot into the fallback initramfs mode, the arch box boots up fine (although it takes 2 whole minutes).  I think that the issue is that I'm missing a module in my mkinitcpio.conf file.
    /etc/fstab file:
    UUID=1245ASDF / btrfs discard,autodefrag,compress=lzo,rw,relatime,ssd,space_cache 0 0
    UUID=2245ASDF /boot ext2 rw,noatime 0 2
    UUID=3245ASDF none swap defaults 0 0
    /etc/mkinitcpio.conf file:
    HOOKS="base btrfs udev autodetect modconf block encrypt lvm2 filesystems keyboard fsck"
    /etc/default/grub file:
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda:enc cryptkey=/dev/sdb2:ext2:/keyfile crypto=sha512:twofish-xts-plain64:512:0:"
    Last edited by a-jamesregan (2015-04-13 19:15:48)

    Wow, there was literally a note about the exact issue I was having on the wiki...
    https://wiki.archlinux.org/index.php/Mkinitcpio#MODULES
    Note: If using reiser4, it must be added to the modules list. Additionally, if you will be needing any file system during the boot process that is not live when you run mkinitcpio — for example, if your LUKS encryption key file is on an ext2 file system but no ext2 file systems are mounted when you run mkinitcpio — that file system module must also be added to the MODULES list. See Dm-crypt/System configuration#cryptkey for more details.
    PS: How do I mark an issue as solved?
    Last edited by a-jamesregan (2015-04-13 10:28:20)

  • Mounting problem, mount: unknown filesystem type 'vfat'

    Can't mount vfat partition.
    Mounting problem, mount: unknown filesystem type 'vfat'

    takavar wrote:sorry for the necromancy, but this is the top result on Google search with no answer.
    I am going to close this thread because (a) the thread is more than two years old, abd (b) may or may not be related to your problem.
    Please open a new thread detailing your problem.  Define what is "Solved" by rebooting.  Does the drive mount during a reboot?  Tell us how you are trying to mount the drive, and provide us your /etc/fstab.  You may want to share the the output of sudo fdisk -l /dev/sda
    If you still think it relevant. provide a link back to this thread.
    Thanks

  • First boot fails - Filesystem type unknown, partition type 0x7

    Just done a straight forward install of Arch onto it's own disk drive, however there are two other drives present in the system.
    Grub menu comes up ok but then Arch errors with:
    root (hd2,0)
    Filesystem type unknown, partition type 0x7
    Error 17: Cannot mount selected partition
    Any suggestions?
    Thanks,

    hokasch wrote:
    What you still did not really tell us - how are you booting up? I.e. where is your first grub stage installed? How did you manage things with the debian install? Your problem is the root(x,x) line, not the kernel line. This line specifies the boot partition (grub's root/ where to find the kernel).
    Coming from the windows world where for years we have just relied on changing the boot order of drives in the BIOS to choose which MBR to boot from I simply assumed it was just as easy in the Linux world, this is obviously not the case.
    If you want to continue that way, just install grub to the MBR of each disk with a linux install and configure grub to use that drive as the first drive (e.g. set the root line to hd(0,0) if /boot is the first partition). IIRC, changing the boot order in the Bios will pull the selected drive to the beginning. That would fit your inital error (but you did not say how you booted into grub then...). You can double-check that behaviour by using the find commands in the grub shell (see my earlier post).
    Going with grub2/grub's root by uuid only really makes sense if you put grub2 on the MBR of a drive which is always installed and selected as primary in Bios (obviously, all other grub2 files must be on that drive too).
    Just done another completely clean install and noticed that even though I select 'Partition access method - uuid' it doesn't seem to actually work that way, at least checking menu.lst showed no signs of any uuids.  What is the point of having an install option if it is then ignored.
    This refers to your fstab, not the bootloader config.
    Sorry hokasch, it got a bit difficult to answer your earlier post as by the time I read it Debian had been trashed and I think I had redone the Arch install a few times by then as well.
    If I have understand you correctly what you are saying is that if I were to install arch on a drive which at install time is the only drive in the machine then root(x,x) would refer to hd0 in my case root (hd0,1) as I have an NTFS partition at the beginning of the drive.  Alternatively I could just edit grub's menu.lst afterwards.  That way as long as the drive is first in the BIOS boot order it will boot ok.  My mistake seems to have been trying to install the first grub stage to somewhere other than the MBR, I may have missunderstood the capabilities of partition identification by uuid.
    Ok lets go back to a single drive environment
    hd0,0 = NTFS boot partition
    hd0,1 = Arch /Boot - this contains grub & vmlinuz-linux
    hd0,2 = Arch swap
    hd0,3 = Arch /
    If I want to boot Windows I set hd0,0 as active/bootable, if I want to boot arch I set hd0,1 as active/bootable.  Actually not sure how to change the active partition to a linux one but come back to that later.  For the moment hd0,1 is the bootable partition.  This is the only drive in the system.  I have a by-uuid entry in menu.lst which allows me to boot if the other entries fail.  menu.lst looks like this:
    # (0) Arch Linux
    title Arch Linux
    root (hd0,1)
    kernel /vmlinuz-linux root=/dev/sda4 ro
    initrd /initramfs-linux.img
    Now I see part of the confusion, as you advised, the root (hdx,x) line actually refers to the 'grub root' / 'linux boot' not the 'linux root'.  And the other confusion is that the kernel line root= does not refer to the location of /vmlinuz-linux but to the actual linux root.  Now I think I understand that bit.
    Now to add another disk to the system.  Change drive order in BIOS so that arch disk is top of the boot order.
    Fails to boot: Unable to find root device /dev/sda4!
    Boot to knoppix to see the disk & partition layout:
    hd0,0 = NTFS
    hd0,1 = NTFS
    hd0,2 = NTFS
    hd0,3 = NTFS
    hd0,4 = NTFS
    hd0,4 = NTFS
    hd0,4 = NTFS
    hd1,0 = NTFS boot partition
    hd1,1 = Arch /Boot - this contains grub & vmlinuz-linux
    hd1,2 = Arch swap
    hd1,3 = Arch /
    So clearly /dev/sda4 is now an NTFS partition.
    If appears that grub & linux do not see disk drives in the same order as the BIOS boot order causing /dev/sda4 to point towards the wrong partition.
    Off at a bit of a tangent here but while I think of it is there a way of regenerating the menu.lst to search for instances of windows on NTFS partitions now that I have access to ntfs-3g.
    Thanks,
    Last edited by NickC_UK (2012-02-21 14:25:04)

  • Unknown filesystem type crypto_LUKS

    Hi, I have spare space on my HD so I decided to experiment with encryption following this wiki:
    https://wiki.archlinux.org/index.php/dm-crypt_with_LUKS
    In summary:
    created boot (sda6) and root (sda7) partitions
    formatted boot as ext2 and root with passphrase and then with ext4
    installed the base system
    generated a new initramfs as explained in the wiki:
    MODULES="dm_mod ext4"
    HOOKS="base udev autodetect modconf block keymap encrypt filesystems keyboard fsck"
    added cryptdevice=<device>:<dmname> to kernel boot options:
    linux /vmlinuz-linux cryptdevice=/dev/sda7:cryptroot root=UUID=d3505fe1-4a29-4841-8e80-e953442d8d30 ro quiet
    restarted pc
    On boot it asks for passphrase, but after that it stops with an error regarding crypto_LUKS; here the complete message:
    A password is required to access the cryptroot volume:
    Enter passphrase for /dev/sda7
    fsck: fsck.crypto_LUKS: not founf
    fsck: error 2 while executing fsck.crypto_LUKS for /dev/sda7
    ERROR: fsck failed on '/dev/sda7'
    ********************* WARNING ***********************
    * The root device is not configured to be mounted *
    * read-write! It may be fsck'd again later. *
    mount: unknown filesystem type 'crypto_LUKS'
    You are now being dropped into an emergency shell.
    sh: can't access tty: job control turned off
    [rootfs /]#
    Here it is my fstab: http://pastebin.archlinux.fr/474004
    and lsblk output: http://pastebin.archlinux.fr/474005
    Any idea about the problem?
    Thanks for your time.

    There are two discrepencies between your kernel parameters and fstab:
    1) The kernel parameter UUID for real root differs from the UUID given for /dev/mapper/cryptroot in your fstab; if cryptroot is your real root partition, the UUIDs should be the same.
    2) Your fstab instructs the system to mount the root partition as read-write, while the kernel parameters specify read-only. (the kernel parameter should be read-write, which is what the warning in the output above is about).
    Change those and see if it helps.

  • BTRFS not mounting (unknown filesystem type)

    Hi everyone,
    From a USB drive I have been trying to install Arch in the fashion given in https://wiki.archlinux.org/index.php/In … Btrfs_root, I have upgraded the system to the newest kernel (3.3.6) and using the instructions created 2 partitions on /dev/sda. One being for Grub to boot the system, and the other being the btrfs.
    I have been unable to mount the btrfs device (/dev/sda2), I keep getting the error
    [root@archiso ~]# mount -o defaults,noatime /dev/sda2 /mnt/btrfs-root
    mount: unknown filesystem type 'btrfs'
    mount, i.e. util-linux is the newest version 2.21.1
    any help is really appreciated

    Well, I think the problem is caused by the loaded kernel being unable to find it's modules (the btrfs module included) because they got uninstalled when you upgraded the kernel package. You could try manually loading the module with modprobe (using -f if you get errors regarding versions), but I can't recommend that course of action, nor can I guarantee that it will fix your mounting problem.

  • Mount: unknown filesystem type 'LVM2_member'

    I recently did a pacman -Syu with some consequences.  I still had grub1 running and it was automatically upgraded to grub2, which is fine, but apparently grub-install was run on the mbr (I really think that was very inappropriate as that did break my system).  Anyhow, on to chroot, I update /etc/default/grub as I have an LVM on top of an encrypted root and add this:
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda5:VGarch"
    and this to mkinitcpio.conf:
    HOOKS="base udev autodetect fsck modconf block encrypt lvm2 filesystems"
    then update both:
    mkinitcpio -p linux
    grub-mkconfig -o /boot/grub/grub.conf
    and then update again for good measure while we're still in the chroot.  However, upon reboot I get the ominous error message:
    mount: unknown filesystem type ‘LVM2_member’
    EDIT: i moved fsck behind filesystems in hooks with no effect
    Last edited by thoth (2013-07-03 01:31:06)

    Post the entire kernel command line you are using (/proc/cmdline).
    Note that the upgrade to grub2 will not have automatically installed grub to disk. So if you have not installed grub to disk, you need to do that in order to configure it correctly.
    i.e. grub-install was *not* run on the mbr as part of the package upgrade.
    See /var/lib/pacman/local/grub-2.00.5043-2/install.
    But your config file for the old grub will have been moved to a .pacsave when that package was removed by pacman.
    Last edited by cfr (2013-07-07 23:28:53)

  • Free space & filesystem type

    I am new to unix , i want to know - how to check filesystem SAN / NFS & total free space in system.

    Well, a beginners' course in Unix is far beyond the scope of this forum.
    Please get the friendly manual, and feel free to make use of Google and the like.
    A hint: Start with df command. Output will differ for various flavours of Unix.
    For more info type:
    man df
    hope this helps

  • /tmp on different partition [quesiton on size and filesystem type]

    Hi,
    This is my partition schema (in mind, still have to apply and go ahead for the installation process)
    /home   xfs   
    /        ext4
    /var    reiserfs
    /tmp    ??
    /boot   ext2   primary
    windows   primary
    Now, I want also a primary partition for windows.
    The /tmp question is,
    what size and what filesystem should I choose during the partitioning procedure?
    The reason why on a different partition ?
    I use Lynis and want to get a higher score
    I never understood how to encrypt the hole thing during the installation, and I want to know also if it's good to install windows first and than linux? so the MBR gets overwrited or the opposite?

    I would use LVM on top of LUKS. The wiki will get you started in the right direction but mostly addresses putting everything on one encrypted partition (no LVM). Basically, you need to encrypt a partition with LUKS and then partition that encrypted partition with LVM.

  • Unknown filesystem type 'nilfs2'

    Got this error
    Module nilfs2 packed to initrd via MODULES='nilfs2' in /etc/mkinitcpio.conf.
    How can I fix this?

    A few questions....
    What exactly was the problem to begin with? 
    It was a bit unclear as to whether ot not you wanted or did not wnat nilfs2 in your initramfs, or if it was simply throwing some kind of error at you or what.
    What did you do to fix it? 
    Simply saying that you fixed it and then ending the thread discussion is not very cool.  It does nothing for the community, or future users in search of help.  So please indicate what you did to fix the problem.
    If it is solved, could you mark the thread as such?
    Edit the first post and prepend [Solved] to the title.  This will help those future seekers of help in finding threads that actually have solutions.  Though I would strongly encourage you to actually put a solution before doing this.  I guess I would also encourage you to clarify the question as well.

  • Read only filesystem problem

    Hi,
    I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
    If i tried to remount it read-write using command
    mount -o remount,rw /
    i got this:
    sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
    mount: /dev/mapper/VG0-archlinux2: can't read superblock
    Only reboot helps.
    my machine is (uname -a):
    Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
    /etc/mtab (when problem occured):
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
    run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sda1 /boot ext2 rw,relatime 0 0
    /dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
    binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
    gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
    dmesg output is this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
    [ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
    [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000130000000 aka 4864M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
    [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
    [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
    [ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000cfee0000 00040
    [ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
    [ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048175
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.003333] Fast TSC calibration using PIT
    [ 0.006666] Detected 2813.035 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000031] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002140] Mount-cache hash table entries: 256
    [ 0.002315] Initializing cgroup subsys cpuacct
    [ 0.002317] Initializing cgroup subsys memory
    [ 0.002326] Initializing cgroup subsys devices
    [ 0.002327] Initializing cgroup subsys freezer
    [ 0.002328] Initializing cgroup subsys net_cls
    [ 0.002330] Initializing cgroup subsys blkio
    [ 0.002349] tseg: 00cff00000
    [ 0.002351] CPU: Physical Processor ID: 0
    [ 0.002352] CPU: Processor Core ID: 0
    [ 0.002353] mce: CPU supports 6 MCE banks
    [ 0.002358] LVT offset 0 assigned for vector 0xf9
    [ 0.002362] using AMD E400 aware idle routine
    [ 0.002998] ACPI: Core revision 20120320
    [ 0.019730] ftrace: allocating 17970 entries in 71 pages
    [ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
    [ 0.165799] Performance Events: AMD PMU driver.
    [ 0.165802] ... version: 0
    [ 0.165803] ... bit width: 48
    [ 0.165803] ... generic registers: 4
    [ 0.165804] ... value mask: 0000ffffffffffff
    [ 0.165805] ... max period: 00007fffffffffff
    [ 0.165806] ... fixed-purpose events: 0
    [ 0.165807] ... event mask: 000000000000000f
    [ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.199154] Booting Node 0, Processors #1 #2
    [ 0.235675] Brought up 3 CPUs
    [ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
    [ 0.239344] devtmpfs: initialized
    [ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.241490] NET: Registered protocol family 16
    [ 0.241574] node 0 link 0: io port [c000, ffff]
    [ 0.241576] TOM: 00000000d0000000 aka 3328M
    [ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
    [ 0.241580] node 0 link 0: mmio [a0000, bffff]
    [ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
    [ 0.241588] TOM2: 0000000130000000 aka 4864M
    [ 0.241589] bus: [00, 03] on node 0 link 0
    [ 0.241590] bus: 00 [io 0x0000-0xffff]
    [ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
    [ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
    [ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
    [ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
    [ 0.241649] ACPI: bus type pci registered
    [ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252350] PCI: Using configuration type 1 for base access
    [ 0.252819] bio: create slab <bio-0> at 0
    [ 0.252870] ACPI: Added _OSI(Module Device)
    [ 0.252871] ACPI: Added _OSI(Processor Device)
    [ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253366] ACPI: EC: Look up EC in DSDT
    [ 0.258796] ACPI: Interpreter enabled
    [ 0.258802] ACPI: (supports S0 S3 S4 S5)
    [ 0.258819] ACPI: Using IOAPIC for interrupt routing
    [ 0.261632] ACPI: No dock devices found.
    [ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [ 0.261768] PCI host bridge to bus 0000:00
    [ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
    [ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
    [ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
    [ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    [ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
    [ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [ 0.262309] pci 0000:00:12.2: supports D1 D2
    [ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.262590] pci 0000:00:13.2: supports D1 D2
    [ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
    [ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
    [ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
    [ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
    [ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.269300] pci 0000:02:00.0: supports D1 D2
    [ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
    [ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
    [ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
    [ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [ 0.276136] pci 0000:03:0e.0: supports D1 D2
    [ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
    [ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.283252] vgaarb: loaded
    [ 0.283253] vgaarb: bridge control possible 0000:01:00.0
    [ 0.283281] PCI: Using ACPI for IRQ routing
    [ 0.291632] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
    [ 0.291778] NetLabel: Initializing
    [ 0.291779] NetLabel: domain hash size = 128
    [ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291789] NetLabel: unlabeled traffic allowed by default
    [ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.293841] Switching to clocksource hpet
    [ 0.298189] pnp: PnP ACPI init
    [ 0.298200] ACPI: bus type pnp registered
    [ 0.298257] pnp 00:00: [bus 00-ff]
    [ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.298303] pnp 00:01: [io 0x0010-0x001f]
    [ 0.298304] pnp 00:01: [io 0x0022-0x003f]
    [ 0.298306] pnp 00:01: [io 0x0044-0x005f]
    [ 0.298307] pnp 00:01: [io 0x0062-0x0063]
    [ 0.298308] pnp 00:01: [io 0x0065-0x006f]
    [ 0.298310] pnp 00:01: [io 0x0074-0x007f]
    [ 0.298311] pnp 00:01: [io 0x0091-0x0093]
    [ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.298316] pnp 00:01: [io 0x0220-0x0225]
    [ 0.298317] pnp 00:01: [io 0x0290-0x0294]
    [ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
    [ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298785] pnp 00:02: [io 0x4100-0x411f]
    [ 0.298789] pnp 00:02: [io 0x0228-0x022f]
    [ 0.298791] pnp 00:02: [io 0x040b]
    [ 0.298792] pnp 00:02: [io 0x04d6]
    [ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.298794] pnp 00:02: [io 0x0c14]
    [ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
    [ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
    [ 0.298798] pnp 00:02: [io 0x0c6f]
    [ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
    [ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
    [ 0.298804] pnp 00:02: [io 0x4210-0x4217]
    [ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
    [ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
    [ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
    [ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
    [ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
    [ 0.298889] system 00:02: [io 0x040b] has been reserved
    [ 0.298891] system 00:02: [io 0x04d6] has been reserved
    [ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.298894] system 00:02: [io 0x0c14] has been reserved
    [ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
    [ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.298899] system 00:02: [io 0x0c6f] has been reserved
    [ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
    [ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
    [ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
    [ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
    [ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298986] pnp 00:03: [dma 4]
    [ 0.298988] pnp 00:03: [io 0x0000-0x000f]
    [ 0.298989] pnp 00:03: [io 0x0080-0x0090]
    [ 0.298991] pnp 00:03: [io 0x0094-0x009f]
    [ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.299038] pnp 00:04: [irq 0 disabled]
    [ 0.299049] pnp 00:04: [irq 8]
    [ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.299088] pnp 00:05: [io 0x0070-0x0073]
    [ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.299114] pnp 00:06: [io 0x0061]
    [ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.299147] pnp 00:07: [irq 13]
    [ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
    [ 0.299272] pnp 00:08: [io 0x03f7]
    [ 0.299279] pnp 00:08: [irq 6]
    [ 0.299281] pnp 00:08: [dma 2]
    [ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
    [ 0.299445] pnp 00:09: [irq 4]
    [ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.299507] pnp 00:0a: [io 0x0060]
    [ 0.299509] pnp 00:0a: [io 0x0064]
    [ 0.299516] pnp 00:0a: [irq 1]
    [ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
    [ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
    [ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
    [ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
    [ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
    [ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.299768] pnp: PnP ACPI: found 13 devices
    [ 0.299769] ACPI: ACPI bus type pnp unregistered
    [ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
    [ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
    [ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306249] NET: Registered protocol family 2
    [ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.309859] TCP: reno registered
    [ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309974] NET: Registered protocol family 1
    [ 0.710572] pci 0000:01:00.0: Boot video device
    [ 0.710585] PCI: CLS 4 bytes, default 64
    [ 0.710637] Unpacking initramfs...
    [ 0.774193] Freeing initrd memory: 3700k freed
    [ 0.776235] PCI-DMA: Disabling AGP.
    [ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.776307] PCI-DMA: using GART IOMMU.
    [ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.779581] LVT offset 1 assigned for vector 0x400
    [ 0.779589] IBS: LVT offset 1 assigned
    [ 0.779613] perf: AMD IBS detected (0x0000001f)
    [ 0.779743] audit: initializing netlink socket (disabled)
    [ 0.779753] type=2000 audit(1348861535.663:1): initialized
    [ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.790783] VFS: Disk quotas dquot_6.5.2
    [ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.790894] msgmni has been set to 7909
    [ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.791075] io scheduler noop registered
    [ 0.791076] io scheduler deadline registered
    [ 0.791112] io scheduler cfq registered (default)
    [ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.791449] GHES: HEST is not enabled!
    [ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.833141] Linux agpgart interface v0.103
    [ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.833378] mousedev: PS/2 mouse device common for all mice
    [ 0.833425] rtc_cmos 00:05: RTC can wake from S4
    [ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.833577] cpuidle: using governor ladder
    [ 0.833578] cpuidle: using governor menu
    [ 0.833689] drop_monitor: Initializing network drop monitor service
    [ 0.833749] TCP: cubic registered
    [ 0.833835] NET: Registered protocol family 10
    [ 0.833965] NET: Registered protocol family 17
    [ 0.833973] Key type dns_resolver registered
    [ 0.834070] PM: Hibernation image not present or could not be loaded.
    [ 0.834076] registered taskstats version 1
    [ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
    [ 0.835479] Freeing unused kernel memory: 760k freed
    [ 0.835631] Write protecting the kernel read-only data: 8192k
    [ 0.839453] Freeing unused kernel memory: 1488k freed
    [ 0.841313] Freeing unused kernel memory: 612k freed
    [ 0.848497] systemd-udevd[70]: starting version 189
    [ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.861403] Floppy drive(s): fd0 is 1.44M
    [ 0.868797] ACPI: bus type usb registered
    [ 0.868817] usbcore: registered new interface driver usbfs
    [ 0.868825] usbcore: registered new interface driver hub
    [ 0.868995] usbcore: registered new device driver usb
    [ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.869785] QUIRK: Enable AMD PLL fix
    [ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [ 0.871224] SCSI subsystem initialized
    [ 0.872843] libata version 3.00 loaded.
    [ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.877278] hub 1-0:1.0: USB hub found
    [ 0.877281] hub 1-0:1.0: 6 ports detected
    [ 0.878035] FDC 0 is a post-1991 82077
    [ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.887266] hub 2-0:1.0: USB hub found
    [ 0.887269] hub 2-0:1.0: 6 ports detected
    [ 0.887719] ahci 0000:00:11.0: version 3.0
    [ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 0.888332] scsi0 : ahci
    [ 0.888396] scsi1 : ahci
    [ 0.888447] scsi2 : ahci
    [ 0.888494] scsi3 : ahci
    [ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [ 0.944618] hub 3-0:1.0: USB hub found
    [ 0.944624] hub 3-0:1.0: 3 ports detected
    [ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [ 1.001279] hub 4-0:1.0: USB hub found
    [ 1.001285] hub 4-0:1.0: 3 ports detected
    [ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [ 1.057932] hub 5-0:1.0: USB hub found
    [ 1.057938] hub 5-0:1.0: 3 ports detected
    [ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [ 1.114589] hub 6-0:1.0: USB hub found
    [ 1.114595] hub 6-0:1.0: 3 ports detected
    [ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [ 1.171271] hub 7-0:1.0: USB hub found
    [ 1.171277] hub 7-0:1.0: 2 ports detected
    [ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
    [ 1.373774] ata2: softreset failed (device not ready)
    [ 1.373843] ata2: applying PMP SRST workaround and retrying
    [ 1.373866] ata1: softreset failed (device not ready)
    [ 1.373934] ata1: applying PMP SRST workaround and retrying
    [ 1.425928] hub 2-4:1.0: USB hub found
    [ 1.426276] hub 2-4:1.0: 4 ports detected
    [ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
    [ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.542034] ata1.00: configured for UDMA/133
    [ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
    [ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
    [ 1.565919] ata2.00: configured for UDMA/100
    [ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
    [ 1.570090] scsi4 : pata_atiixp
    [ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.571032] scsi5 : pata_atiixp
    [ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.583928] sda: sda1 sda2 sda3 sda4
    [ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
    [ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
    [ 1.780391] Switching to clocksource tsc
    [ 1.850813] usbcore: registered new interface driver usbhid
    [ 1.850814] usbhid: USB HID core driver
    [ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
    [ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
    [ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
    [ 1.925431] device-mapper: uevent: version 1.0.3
    [ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
    [ 2.294160] REISERFS (device dm-3): using ordered data mode
    [ 2.294161] reiserfs: using flush barriers
    [ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
    [ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
    [ 3.521243] systemd-udevd[196]: starting version 192
    [ 3.731543] vboxdrv: Found 3 processor cores.
    [ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
    [ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
    [ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.078340] ACPI: Power Button [PWRB]
    [ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.078391] ACPI: Power Button [PWRF]
    [ 4.118249] wmi: Mapper loaded
    [ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
    [ 4.266129] EDAC MC: Ver: 2.1.0
    [ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
    [ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
    [ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
    [ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
    [ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.460371] MCE: In-kernel MCE decoding enabled.
    [ 4.461269] AMD64 EDAC driver v3.4.0
    [ 4.461326] EDAC amd64: DRAM ECC disabled.
    [ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
    [ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
    [ 5.157960] kvm: Nested Virtualization enabled
    [ 5.157964] kvm: Nested Paging enabled
    [ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
    [ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
    [ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
    [ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
    [ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 5.445767] microcode: CPU0: patch_level=0x01000086
    [ 5.513053] ath: EEPROM regdomain: 0x809c
    [ 5.513060] ath: EEPROM indicates we should expect a country code
    [ 5.513064] ath: doing EEPROM country->regdmn map search
    [ 5.513067] ath: country maps to regdmn code: 0x52
    [ 5.513070] ath: Country alpha2 being used: CN
    [ 5.513073] ath: Regpair used: 0x52
    [ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.720419] microcode: CPU1: patch_level=0x01000086
    [ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.721373] microcode: CPU2: patch_level=0x01000086
    [ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
    [ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.296714] Disabling lock debugging due to kernel taint
    [ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
    [ 6.321474] Linux media interface: v0.10
    [ 6.384863] Linux video capture interface: v2.00
    [ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
    [ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
    [ 6.469404] usbcore: registered new interface driver uvcvideo
    [ 6.469407] USB Video Class driver (1.1.1)
    [ 7.020908] usbcore: registered new interface driver snd-usb-audio
    [ 7.051400] set resolution quirk: cval->res = 384
    [ 8.232297] reiserfs: enabling write barrier flush mode
    [ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
    [ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.462516] wlan0: authenticated
    [ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
    [ 11.471130] wlan0: associated
    [ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
    [ 27.419761] fuse init (API version 7.19)
    [ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
    [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    [ 2088.845667] ata1: SError: { HostInt Handshk }
    [ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845694] ata1.00: status: { DRDY }
    [ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845716] ata1.00: status: { DRDY }
    [ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845737] ata1.00: status: { DRDY }
    [ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845758] ata1.00: status: { DRDY }
    [ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845779] ata1.00: status: { DRDY }
    [ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845800] ata1.00: status: { DRDY }
    [ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845820] ata1.00: status: { DRDY }
    [ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845841] ata1.00: status: { DRDY }
    [ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845862] ata1.00: status: { DRDY }
    [ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845883] ata1.00: status: { DRDY }
    [ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845905] ata1.00: status: { DRDY }
    [ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845927] ata1.00: status: { DRDY }
    [ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845947] ata1.00: status: { DRDY }
    [ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845970] ata1.00: status: { DRDY }
    [ 2088.845978] ata1: hard resetting link
    [ 2089.329937] ata1: softreset failed (device not ready)
    [ 2089.329948] ata1: applying PMP SRST workaround and retrying
    [ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2089.498245] ata1.00: configured for UDMA/133
    [ 2089.509941] sd 0:0:0:0: [sda]
    [ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.509956] sd 0:0:0:0: [sda]
    [ 2089.509959] Sense Key : 0xb [current] [descriptor]
    [ 2089.509966] Descriptor sense data with sense descriptors (in hex):
    [ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.509987] 1a 07 b2 c7
    [ 2089.509996] sd 0:0:0:0: [sda]
    [ 2089.509999] ASC=0x0 ASCQ=0x0
    [ 2089.510004] sd 0:0:0:0: [sda] CDB:
    [ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
    [ 2089.510021] end_request: I/O error, dev sda, sector 436711063
    [ 2089.510032] Buffer I/O error on device dm-3, logical block 631
    [ 2089.510035] lost page write due to I/O error on dm-3
    [ 2089.510058] sd 0:0:0:0: [sda]
    [ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510066] sd 0:0:0:0: [sda]
    [ 2089.510068] Sense Key : 0xb [current] [descriptor]
    [ 2089.510073] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510091] 1a 07 b2 c7
    [ 2089.510099] sd 0:0:0:0: [sda]
    [ 2089.510101] ASC=0x0 ASCQ=0x0
    [ 2089.510106] sd 0:0:0:0: [sda] CDB:
    [ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
    [ 2089.510121] end_request: I/O error, dev sda, sector 436711095
    [ 2089.510126] Buffer I/O error on device dm-3, logical block 635
    [ 2089.510129] lost page write due to I/O error on dm-3
    [ 2089.510140] sd 0:0:0:0: [sda]
    [ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510146] sd 0:0:0:0: [sda]
    [ 2089.510149] Sense Key : 0xb [current] [descriptor]
    [ 2089.510153] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510171] 1a 07 b2 c7
    [ 2089.510178] sd 0:0:0:0: [sda]
    [ 2089.510181] ASC=0x0 ASCQ=0x0
    [ 2089.510185] sd 0:0:0:0: [sda] CDB:
    [ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
    [ 2089.510200] end_request: I/O error, dev sda, sector 436711103
    [ 2089.510205] Buffer I/O error on device dm-3, logical block 636
    [ 2089.510208] lost page write due to I/O error on dm-3
    [ 2089.510212] Buffer I/O error on device dm-3, logical block 637
    [ 2089.510215] lost page write due to I/O error on dm-3
    [ 2089.510220] Buffer I/O error on device dm-3, logical block 638
    [ 2089.510222] lost page write due to I/O error on dm-3
    [ 2089.510227] Buffer I/O error on device dm-3, logical block 639
    [ 2089.510230] lost page write due to I/O error on dm-3
    [ 2089.510245] sd 0:0:0:0: [sda]
    [ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510252] sd 0:0:0:0: [sda]
    [ 2089.510254] Sense Key : 0xb [current] [descriptor]
    [ 2089.510258] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510276] 1a 07 b2 c7
    [ 2089.510284] sd 0:0:0:0: [sda]
    [ 2089.510286] ASC=0x0 ASCQ=0x0
    [ 2089.510290] sd 0:0:0:0: [sda] CDB:
    [ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
    [ 2089.510305] end_request: I/O error, dev sda, sector 436711135
    [ 2089.510310] Buffer I/O error on device dm-3, logical block 640
    [ 2089.510313] lost page write due to I/O error on dm-3
    [ 2089.510317] Buffer I/O error on device dm-3, logical block 641
    [ 2089.510320] lost page write due to I/O error on dm-3
    [ 2089.510325] Buffer I/O error on device dm-3, logical block 642
    [ 2089.510327] lost page write due to I/O error on dm-3
    [ 2089.510332] Buffer I/O error on device dm-3, logical block 643
    [ 2089.510335] lost page write due to I/O error on dm-3
    [ 2089.510400] sd 0:0:0:0: [sda]
    [ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510407] sd 0:0:0:0: [sda]
    [ 2089.510409] Sense Key : 0xb [current] [descriptor]
    [ 2089.510414] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510432] 1a 07 b2 c7
    [ 2089.510440] sd 0:0:0:0: [sda]
    [ 2089.510442] ASC=0x0 ASCQ=0x0
    [ 2089.510446] sd 0:0:0:0: [sda] CDB:
    [ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
    [ 2089.510461] end_request: I/O error, dev sda, sector 436711335
    [ 2089.510502] sd 0:0:0:0: [sda]
    [ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510509] sd 0:0:0:0: [sda]
    [ 2089.510511] Sense Key : 0xb [current] [descriptor]
    [ 2089.510515] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510533] 1a 07 b2 c7
    [ 2089.510541] sd 0:0:0:0: [sda]
    [ 2089.510543] ASC=0x0 ASCQ=0x0
    [ 2089.510548] sd 0:0:0:0: [sda] CDB:
    [ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
    [ 2089.510563] end_request: I/O error, dev sda, sector 436711479
    [ 2089.510610] sd 0:0:0:0: [sda]
    [ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510617] sd 0:0:0:0: [sda]
    [ 2089.510619] Sense Key : 0xb [current] [descriptor]
    [ 2089.510623] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510641] 1a 07 b2 c7
    [ 2089.510649] sd 0:0:0:0: [sda]
    [ 2089.510651] ASC=0x0 ASCQ=0x0
    [ 2089.510656] sd 0:0:0:0: [sda] CDB:
    [ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
    [ 2089.510670] end_request: I/O error, dev sda, sector 436711663
    [ 2089.510713] sd 0:0:0:0: [sda]
    [ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510720] sd 0:0:0:0: [sda]
    [ 2089.510722] Sense Key : 0xb [current] [descriptor]
    [ 2089.510727] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510744] 1a 07 b2 c7
    [ 2089.510752] sd 0:0:0:0: [sda]
    [ 2089.510754] ASC=0x0 ASCQ=0x0
    [ 2089.510759] sd 0:0:0:0: [sda] CDB:
    [ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
    [ 2089.510774] end_request: I/O error, dev sda, sector 436711831
    [ 2089.510812] sd 0:0:0:0: [sda]
    [ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510819] sd 0:0:0:0: [sda]
    [ 2089.510821] Sense Key : 0xb [current] [descriptor]
    [ 2089.510825] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510843] 1a 07 b2 c7
    [ 2089.510851] sd 0:0:0:0: [sda]
    [ 2089.510854] ASC=0x0 ASCQ=0x0
    [ 2089.510858] sd 0:0:0:0: [sda] CDB:
    [ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
    [ 2089.510873] end_request: I/O error, dev sda, sector 436711959
    [ 2089.510919] sd 0:0:0:0: [sda]
    [ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510926] sd 0:0:0:0: [sda]
    [ 2089.510928] Sense Key : 0xb [current] [descriptor]
    [ 2089.510933] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510951] 1a 07 b2 c7
    [ 2089.510959] sd 0:0:0:0: [sda]
    [ 2089.510961] ASC=0x0 ASCQ=0x0
    [ 2089.510966] sd 0:0:0:0: [sda] CDB:
    [ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
    [ 2089.510980] end_request: I/O error, dev sda, sector 436712135
    [ 2089.511030] sd 0:0:0:0: [sda]
    [ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511037] sd 0:0:0:0: [sda]
    [ 2089.511039] Sense Key : 0xb [current] [descriptor]
    [ 2089.511043] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511061] 1a 07 b2 c7
    [ 2089.511069] sd 0:0:0:0: [sda]
    [ 2089.511071] ASC=0x0 ASCQ=0x0
    [ 2089.511076] sd 0:0:0:0: [sda] CDB:
    [ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
    [ 2089.511090] end_request: I/O error, dev sda, sector 436711055
    [ 2089.511111] sd 0:0:0:0: [sda]
    [ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511118] sd 0:0:0:0: [sda]
    [ 2089.511120] Sense Key : 0xb [current] [descriptor]
    [ 2089.511125] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511144] 1a 07 b2 c7
    [ 2089.511151] sd 0:0:0:0: [sda]
    [ 2089.511154] ASC=0x0 ASCQ=0x0
    [ 2089.511158] sd 0:0:0:0: [sda] CDB:
    [ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
    [ 2089.511173] end_request: I/O error, dev sda, sector 436711071
    [ 2089.511188] sd 0:0:0:0: [sda]
    [ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511195] sd 0:0:0:0: [sda]
    [ 2089.511197] Sense Key : 0xb [current] [descriptor]
    [ 2089.511201] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511219] 1a 07 b2 c7
    [ 2089.511227] sd 0:0:0:0: [sda]
    [ 2089.511230] ASC=0x0 ASCQ=0x0
    [ 2089.511234] sd 0:0:0:0: [sda] CDB:
    [ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
    [ 2089.511249] end_request: I/O error, dev sda, sector 436711079
    [ 2089.511263] sd 0:0:0:0: [sda]
    [ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511270] sd 0:0:0:0: [sda]
    [ 2089.511272] Sense Key : 0xb [current] [descriptor]
    [ 2089.511277] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511295] 1a 07 b2 c7
    [ 2089.511302] sd 0:0:0:0: [sda]
    [ 2089.511305] ASC=0x0 ASCQ=0x0
    [ 2089.511309] sd 0:0:0:0: [sda] CDB:
    [ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
    [ 2089.511324] end_request: I/O error, dev sda, sector 436711087
    [ 2089.511343] ata1: EH complete
    [ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
    error.log (only part related to the current session):
    Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    Sep 28 20:20:21 localh

    uzsolt wrote:
    I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
    I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
    Errors in logs:
    Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
    Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
    Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
    Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
    Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
    Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
    Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
    Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
    Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
    Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
    Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
    Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
    Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
    Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
    Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
    Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
    Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
    Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
    Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
    Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
    Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
    Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
    Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
    Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
    Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
    Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
    The other partition works well on same disk as I wrote above.
    Is /home on /dev/sda3?

Maybe you are looking for

  • Data pump with flashback_scn or flashback_time

    Dear Gurus, The Oracle database version in used is 11gR2. We don't have flashback enabled for the database. However to run a data pump export with consistency, can we turn on FLASHBACK_SCN or FLASHBACK_TIME? Best rac110g

  • Sort of an ipad question. Re: DVD digital copies

    Can you copy DVDs and/or Blu Rays that come with a free digital copy into your itunes library? If you can, are those same movies able to be transferred to your iPad? i have about 5 movies in my DVD/Blu Ray collection that came with digital copies and

  • My MPB 13 late 2011 is using too much ram?

    Hi my mbp was running slow with 4gb of ram so i upped it to 16gb. It was previously constantly maxing out at 4gb but right now even at 16gb it is maxing out. I have attached a screenshot. is this normal or is there some hardware defects? THANK IN ADV

  • How do I change the weather widget location from Cupertino to my location?

    How do I change the weather widget from Cupertino to my location?

  • Scb_*.tmp Files

    I am facing a problem similar to the problem here. http://www.linuxquestions.org/questions/showthread.php?threadid=74955 Basically, I am using MS Sql Server JDBC driver. After running my servlet for a while, I got a �Too many open files� error. Then