FileUpload PJC in Oracle 9iAS 1.0.2.0.0

Dear Experts.
I'm trying the FileUpload PJC with Oracle iAS 9i (1.0.2.0.0) with Forms 6i Release 2. Have not used ant patches, is the FileUpload utility will work in this configuration?
Or any other things i need to run the FileUpload utility.
And i struggling to configure the FileUpload utility in the server.
Please help me
Hopefully,
Vijayakumar Sethuramalingam

In fact when installing 9iAS 1.0.2.2.2, the default report server name looks like this REP60_TEST.INTNET.MU.
My original tnsnames.ora was like this
REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
I added an alias to the tnsnames.ora file
now my tnsnames.ora is like this
REP60TEST,REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
This is working fine
Thanks

Similar Messages

Error in the assistant of installation of Oracle 9ias 9.0.2 single sing-on

Install oracle 9ias 9.0.2.0, but when this in the assisting existing Oracle 9ias single singn-on the error that the host or port are not been worth appears. in the host sijita.uptc.edu.co places and in the port 7777. That it can be the error??? one doesn't also eat to pull up the Apache service because the following error appears:
$ apachectl start
Syntax error on line 6 of /u06/oracle/ora9ias/Apache/Apache/conf/mod_osso.conf:
Unable to deobfuscate the SSO server config file,
/u06/oracle/ora9ias/Apache/Apache/conf/osso/osso.conf, error Bad padding
pattern detected in the last block.
/u06/oracle/ora9ias/Apache/Apache/bin/apachectl start: httpd could not be started
WARNING!! Direct use of apachectl within Oracle9iAS is
deprecated. Using apachectl in conjunction with opmn may lead
to unexpected behavior (such as opmn automatically restarting
OHS after it has been shutdown using apachectl). Please use
dcmctl (located at ORACLE_HOME/dcm/bin/dcmctl) instead.
apachectl may not be shipped with future versions of Oracle9iAS.
$ httpd start
Ouch! ap_mm_create(1048576, "/tmp/apache/logs/mm.1262") failed
Error: MM: mm:core: failed to open memory file (No such file or directory):
OS: No such file or directory

9iAS (9.0.2.0.1) is desupported and will not be certified against any new OS releases...
Regards,
Martin

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

DISCOVERER REPORT ISSUE IN Oracle 9iAS

Hi All,
I am trying to export file on Oracle 9iAS using discoverer using excel format, But not able to export in proper format. Can anyone help me for this please
Regards
Kumar

Please reply for this

Setup problem in Oracle 9iAS

I like to install my machine in Oracle 9ias. My machine has the Windows 2000 OS and Oracle 9i DB. When i clicked the Isetup.exe from the cd getting the error
"Setup has detected that your isuite Product Install has not been setup correctly, probably because the installation was aborted Please restart setup"
Please give me some suggestion for installing Oracle 9iAS

Do you have SP 2 or higher ?
Do you want to install only J2EE and Web Cache or another kind of installation ?
Joel Pérez

Multiple Copy to Print on Oracle 9iAS Report

Dear Friends
When I an Trying to Print a Report on Oracle 9iAS, and Pass the Parameter More than One in Numbers of Copies it returns error wirh Error Code 1
Report Error Code REP-50157,
After Each Page One Blank Page Printed, On some documenttaion they mentioned that pass BACKGROUND = NO in URL, I did the same but probelm remains
Can you Help me ?

You should post this question in the general application server forum for an appropriate response: Oracle Application Server - General
OTN

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How to tell the version of the ORacle 9iAS?

How to find the version information about the Oracle 9iAS (Not OC4J) from Enterprise Manager? In windows, we can always use help-->about to get the version number, how do I know the version of the application server is 9.0.2 or 9.0.3?
thanks

AS rel 2 is 9.0.2, never 9.0.3. But AS suite has many many product components that has different version number strings depending on your installations and your set of installed Patch Sets (e.g. you could have Infrastructure 9.0.2.3.0 and Core RSFs 9.0.1.4.0a)
OC4J has been released as 9.0.3, next full AS is 9.0.4 (according to Metalink but who knows, maybe it'll be 10.0.1, 10.1.4 or whatever sounds marketingishly good)

Oracle 9iAS on Solaris w/Oracle 8.1.6 on NT 4

We are currently running Oracle 7.3.4 on NT 4 w/Oracle Application Server 4.0.8.1 on NT 4. We are planning to set up a new Oracle 8.1.6 database server to replace the 7.3.4 database, and after that set up a Solaris box with Oracle 9iAS to replace the OAS 4.0.8.1. Can someone (ideally from Oracle) comment whether there are any issues which would cause problems between such a final set up? I heard that database-wise 8.1.5 was the minimum necessary to work with iAS even back when it was 8iAS. In any case, I would like to get some confirmation that the NT database and the Solaris Application Server will not have problems. I didn't see any comments about problems in a quick look at the 9iAS release notes or installation guide.
Thanks.
-Ken Ho

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Todd Eisemann ([email protected]):
HI
Can anyone tell me the mystical secrets buried in Note 131299.1? I have this same problem on a Pentium 4. Yet, I do not have an Oracle support contract. I bought the OTN bundle, but did not buy any support.
Do I have to buy support just to load any of the OTN bundle on my new P4 system?
thanks
<HR></BLOCKQUOTE>
problem @see: http://developer.intel.com/design/processor/future/manuals/knownissue.htm
solution @see: JRE Version 1.2.2_007 for Microsoft Windows
(http://java.sun.com/products/jdk/1.2/jre/download-windows.html)to get new symcjit.dll, replace old version.
null

Where can i find the temp file in oracle 9ias ver 9.0.3

Hi All,
When I am trying to deploy stateless session bean(SLSB)in oracle 9ias ver 9.0.3,i am getting the following exception
SequenceHome_StatelessSessionHomeWrapper3.java:9: SequenceHome_StatelessSessionHomeWrapper3 should be declared abstract; it does not define create (java.lang.String) in SequenceHome_StatelessSessionHomeWrapper3
public class SequenceHome_StatelessSessionHomeWrapper3 extends com.evermind.server.ejb.RemoteStatelessSessionEJBHome implements sequence.SequenceHome
and one more where can i find this temp file.I want to see this SequenceHome_StatelessSessionHomeWrapper3.java file..how its possible
Thanks and Regards,
Bala

Try this link - it should always point to the latest iteration

[b]How to deploy forms 6i on Oracle 9iAS[/b]

Hello,
Anybody knows hot to deploy forms 6i on Oracle 9iAS (WEB).
Oracle 9i Application contains several options
1. Oracle9iAS installation.
1.1 J2EE and Web Cache.
1.2 Portal and Wireless.
1.3 Business Intelligence and Forms.
2. Oracle9iAS Infrastructure installation.
3. Oracle9iAS Developer Kits installation.
I want to know , Which option should i select in order to deploy the forms on web.
Thank You.
Rahul

I'm not sure if you can deploy Forms6i on 9iAS. Anyway, this is not the right forum for this question. Please repost your question in the 9iAS General forum or in one of the Forms-related iDS forums.

How To Deploy Forms 6i on Oracle 9iAS (WEB)

Hello,
Anybody knows hot to deploy forms 6i on Oracle 9iAS (WEB).
Oracle 9i Application contains several options
1. Oracle9iAS installation.
1.1 J2EE and Web Cache.
1.2 Portal and Wireless.
1.3 Business Intelligence and Forms.
2. Oracle9iAS Infrastructure installation.
3. Oracle9iAS Developer Kits installation.
I want to know , Which option should i select in order to deploy the forms on web.
Thank You.
Rahul

1.3 Business Intelligence and Forms.
Please post Forms questions in the Forms Forum.
More info in the Forms Upgrade Center:
http://otn.oracle.com/products/forms/htdocs/upgrade

How to Deploy forms 6i on Oracle 9iAS

Hello,
Anybody knows hot to deploy forms 6i on Oracle 9iAS (WEB).
Oracle 9i Application contains several options
1. Oracle9iAS installation.
1.1 J2EE and Web Cache.
1.2 Portal and Wireless.
1.3 Business Intelligence and Forms.
2. Oracle9iAS Infrastructure installation.
3. Oracle9iAS Developer Kits installation.
I want to know , Which option should i select in order to deploy the forms on web.
Thank You.
Rahul

1.3 Business Intelligence and Forms.
Please post Forms questions in the Forms Forum.
More info in the Forms Upgrade Center:
http://otn.oracle.com/products/forms/htdocs/upgrade

Integration of Oracle 9iAS Email with Portal-URGENT!!!!

Hi all,
Is it possible to integrate Oracle 9iAS Email component with Oracle Portal so that we can do away with the need for installing Exchange Portlets?Can neone throw more light in this regard.
Regds.
Kiran.

9iAS comes with an Email Server, if that is what you are asking.
You could always write an IMAP portlet, which allows you to read/send mail.
Hi all,
Is it possible to integrate Oracle 9iAS Email component with Oracle Portal so that we can do away with the need for installing Exchange Portlets?Can neone throw more light in this regard.
Regds.
Kiran.

Oracle 9iAS Orion Server Crashes on Running RWSERVLET

We are developing a product with JSP as front end,EJB as middle tier and Oracle as DB.Oracle 9iAS is the deployment environment.We are using the RWSERVLET configuration. We have configured Orion to communicate with RWSERVLET.Rwservlet copied to web-inf/classes folder,entry given in web.xml accordingly.Two JAR files copied to lib folder.When the first request goes from client the report is getting displayed fine.
There is a delay in displaying the output of the request.If in case another request is sent from the same client before the first request is served by the reports server,the RWServlet makes the Orion of Oracle 9iAS to crash.The middle tier aborts with the following message..
# HotSpot Virtual Machine Error, EXCEPTION_ACCESS_VIOLATION
# Error ID: 4F533F57494E13120E43505002D4
abnormal program termination
Also, in reports there is no way of finding whether the report server is still serving the request or has finshed the request,so that atleast we can stop the user from making the second request,if the report server is serving the first request.IS IT A BUG IN RWSERVLET???? - Oracle Reports Team.Has it been rectified??.Is there a way of finding whether the report server has served the request or not??.We are in the end of our project and Oracle Reports have created this problem for us....
Please help Oracle Reports Team.Help!!!!!!
Gracelin

hello,
for your problem with the crash of OC4J, i would contact oracle support services.
if you set up the reports server database queues, it will mirror the server queue into a database table, where you can check what the status of your job is.
regards,
the oracle reports team --pw

FileUpload PJC in Oracle 9iAS 1.0.2.0.0

Similar Messages

Maybe you are looking for