FileUpload UI element -"browse"label is not coming in Hungrian for Hungrian

Folks,
We are using FileUpload ui element in our application, our application supports English , Hugrian languages, Problem is here , label on browse button coming in English for hungrian users.
I believe no need to add any translation to browse label in .xlf file,
can any one tell me how to add Hungrian translation to Browse label, how to check standard translations of file upload ui element?
Thanks & Regards,
Veera.

Hi Anup,
portal User language is already hungray and rest of the labels in page are coming in hungrian as we maintained in -hu.xlf file.but for FileUpload ui element there is no option to map label of "browse" button with a message pool attribute.
Thanks & Regards,
Veera.

Similar Messages

Resp Person Tab is not coming in CJ20N for a particular project type

Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol Pareek

Hey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol

Document Browser Tab is not coming in CV01N,CV02N,CV03N.

Dear Expert,
can anyone guide me for getting Document Browser Tab in CV01N,CV02N,CV03N. i have activated the Browser flage in DCSWITCH(Browser ACL Customizing Switch).
Regards
Bhuwan Tiwari

Hi Bhuwan
Go to SPRO>DMS>Control Data>Activate Browsers and ACLS.
Tick the relevant selection.
When you go to CV01N and press Button Select Document Via ( Ctrl + F7 ) you get new browser .You can togle between two browsers.
With Regards
Mangesh Pande
Edited by: MANGESH PANDE on May 11, 2009 7:57 AM

Cenvat clearing account is not coming in MIRO for Basic excise

Dear sir,
I have created the PO . After that i did GR for same at that I capture excise invocie& post it.
Accounting document is created for the same
here is accounting enrtry
        cenvat Basic = 100 debit
        cenvat edu cess = 2 debit
       Cenvat Higher Ecess =1 debit.
   Cenvat clearing account = 103 credit
when i go the miro
after simulating in miro i found
cenvat clearing account = 2 debit
but it should be 103 debit
why this is coming please help me...

Hi,
Generally it happens if CENVAT Clearing Account in not assigned in OB40 to the Tax Account Keys. But, as per you it has been maintained. So the following if you are using Tax Procedure TAXINN;
SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Condition-Based Excise Determination > Classify Condition Types

Records is not coming in Delta for Inventory Cubes.

Hi..All
We are working on BW3.5 SP11 since 01.07.2005.
We are facing a very serious problem in Inventory management data extraction from R/3 since 24.08.2005.
Our active data sources of Inventory Mangement are as follow.
     2LIS_03_BF
     2LIS_03_BX
     2LIS_03_UM
We were regularly getting records through delta as per given schedule after intialisation on 01.07.2005 to till 23.08.2005.
On 24.08.2005 -- Delta schedule we had find out there are some records that were created in R/3 did not come in BW.
On 24.08.2005 -- records loaded in PSA was 20550. The same is appering in RSA3(EXTRACTORS) also.
The Last material document loaded was 4900154552 date 23.08.2005 time 16:56:05 of R/3, but there are many other material documents that were created on the same day but are missing in the extraction.
On 25.08.2005 delta schedule records are getting 0 (Zero). Not a single record is getting in RSA3 (Extractor).
on 26.08.2005 situation is still as it is. No record is coming.
Where as our average records per day is approx. 20000 nos.
The update mode for inventory is Unserialised V3 update, and the update program in R/3 is running perfectly fine as per schdule with no errors.
We could not understand why suddenly stop the extraction of records FOR INVENTORY MANAGEMENT. Because rest all
data sources like Purchasing,Sales and Distribution,Quality Mangement, and PP is working fine on same date.
We checked the data in extractor checker with giving UPDATE MODE "F"-Transfer all requested data.
Still it is showing 0 (Zero Records) for data sources 2LIS_03_BF,2LIS_03_UM.
The situation is still as it is as of now.
This is very crutial for our business. All inventory reports are showing data which is 3 days old.
Please give your advice on this issue. And how to get the records in PSA from R/3.
Regards,
Navin

Hi Ravindra,
Thanks for giving input. The problem got solved.
There was a problem with QRFC Table. Tcode LBWQ
Status was wait.
Thanks for giving feedback.
Regards,
Navin

My TEXT messages are not coming in except for when im on wifi...this never happened before to me! if i turn Imessage OFF on my phone and ipad it still doesnt come in! HELP

im not getting my TEXT messages anymore until i get around Wifi and then they flow in....i have Imessage on on both iphone and ipad...i tried turning OFF Imessage and they still dont come in!

If they are coming in when you are around wifi, are the bubbles blue or green? SMS messages (green) are cellular and wifi would have nothing to do with this. They won't be carried over wifi. If they are blue bubbles, then they are iMessages and are coming in when you get to wifi because you are finally able to receive data, since you say you have cellular data turned off.

Data is not coming in RSA3 for LIS Data Source 2LIS_02_S174

Hi BW Experts,
We got one requirement on LIS. I haven't work on LIS previously.
Data Source Name: 2LIS_02_S174, This is activated and able to see in T-Code: OMO2.
First we checked the contents of S174 in SE11 & RSA3 and found 0 Records before filling the Setup Tables.
Then we filled the Setup Tables for S174 and finally got 0 Records in RSA3 as well as in S174 table also after filling the Setup Tables.
I have Given version name : &(A
We dont know, what are the settings we need to do before filling the Setup Tables. But we checked job overview in SM37 and it was taking 120 Sec.
Thanks in advance
Regards
Pinky Reddy

Hi Pinky
Yes, LBWG is the generic T Code for deleting the setup tables of any application area. You need to enter your application area number in LBWG which deletes the content of all the setup tables pertaining to that application area.
Please make sure before performing LBWG that you have activated the extract structure for the particular Datasource in LBWE.
For filling 2LIS_02_S174, use OLI3BW.
Thanks
Nirmit

When I 'zoom' my browser, it does not hold the zoom for the next view and I have to 're-zoom, it used to stay at a chosen level of zoom, any ideas?'

I used to be when I zoomed the view using Ctrl and mouse wheel that the next page would be at the sam elevel of zoom. Now I have to re-zoom every time I open a page.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

/ZF5 and TDS Exemption is not coming for custom PF contribution

Hi Friends,
Need help regarding the custom PF deduction, requirement is
IF GROSS - HRA < 6500 then *12%
IF GROSS - HRA > 6500 then Only BASIC * 12%
for this i written pcr and places in the schema also and in payslip PF amount's are coming correctly.
Now my problem is PF Tax exemption i.e., Agg. of Chapter VI is not taking and if retro (any arrears) CF PF is not coming.
can any one please tell how to get the Carry forward PF while in retro and PF exemption for TDS.
please tell PCR and in which Schema i has to add.
My Problem is CF PF is not coming and Exemption u/s 10 also not coming
Screen shots for what i have done:
PCR:
SCHEMA:
INN1 - Gross to Net Calculation
INAL - Monthly factoring and storage (cumul.of gross amount)
Thanks and Best Regards,
Praneeth kumar

Hi Friends,
My requirement is for only one PSA - TANA, PF Basis amount has to check the wage types Basic (2100) and Additional Allowances (3800).
logic is if Basic + Addl. Allowance is less than 6500, the 12% on Basic + Addl. Allownace
if Basic + Addl. Allowance is greater than 6500, the 12% on Basic wage type only.
I changed my PCR and while running the payroll, it is calculating the PF 12% and again 12% and storing in the wage types /3f1,/3f3......
problem is, pcr is checking the /111 EPF Basis and according to logic it is multiplying 12% on that amount. but i want the result like check the EPF Basis and do according to logic and store the values.
system behaving :
Basic - 7727
Allow - 1289
total = 9016
calculation: 7727*12% = 928
system is calculating = 928*12% = 111
PCR:
Payslip:
Best Regards,
Praneeth kumar

Cisco 4503 "1000BaseLH" SFP light is not coming ---- Urgent

Dear Team,
I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine.
Please suggest.
CORE#show int GigabitEthernet1/18
GigabitEthernet1/18 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet Port, address is 001e.4aa6.b891 (bia 001e.4aa6.b891)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, Auto-speed, link type is auto, media type is 1000BaseLH
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
CORE#show inventory
NAME: "GigabitEthernet1/18", DESCR: "1000BaseLH"
PID: TRF5735AALB202 , VID: A1 , SN: OPA11241478
Thank You,
Abhisar.

Dear Reza,
we connected cable and it came up. The conclusion is single m9de sfps does not show light where multimode sfp shows light when sfp is connected on switch port.
Thank you for your suggesion.
Thank You,
Abhisar.

BOM items are not coming in Subcontracting PO

Hi,
I have created a Finish good material and also have made BOM for that Finish material when I am trying to make a Subcontracting PO for that Finish material the BOM items are not coming in PO for that Finish material only for other material BOM items are coming properly.
regards,
zafar
Edited by: zafar_karnalkar on May 29, 2010 1:48 PM

Hi,
Pl. recheck the BOM.
Bom usage 1.
Item Type : L
SAM

Cisco 4503 "1000BaseLH" SFP light is not coming

Dear Team,
I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine.
Please suggest.
CORE#show int GigabitEthernet1/18
GigabitEthernet1/18 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet Port, address is 001e.4aa6.b891 (bia 001e.4aa6.b891)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, Auto-speed, link type is auto, media type is 1000BaseLH
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
CORE#show inventory
NAME: "GigabitEthernet1/18", DESCR: "1000BaseLH"
PID: TRF5735AALB202 , VID: A1 , SN: OPA11241478
Thank You,
Abhisar.

Thanks Marvin,
It is solved.
https://supportforums.cisco.com/discussion/12464296/cisco-4503-1000baselh-sfp-light-not-coming-urgent
Thank You,
Abhisar.

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to) and offset -1
                               DATE TO      var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to)
                               DATE TO      var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

The first two issues sound like a video driver problem.
What is the make/model of your video card/chip?
What is the installed video driver number and date?
For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
Good luck,
Hunt

WBS element output not coming properly .

Hi ,
I have a customized report with , project(proj-pspid) ,wbs element( prps-posid) as selection parameters . The output is coming preperly when project is given as output but is not coming properly when wbs element is given as input. I am using PSJ logical database . Not sure why in debugging while giving only wbs element it is going to 'Conversion_exit_abpsn_input' instead of teh conversion exit 'Conversion_exit_abpsp_input' . Any idea on how it can be resolved?

Hi,
Please refer the WBS element to PSPNR (PRPS-PSPNR) instead of prps-posid ,
prps-posid refers to exit 'Conversion_exit_abpsn_input' and not 'Conversion_exit_abpsp_input'.
Regards,
Srini.

FileUpload UI element -"browse"label is not coming in Hungrian for Hungrian

Similar Messages

Maybe you are looking for