FileUpload: writing path problem

Hi everybody,
I have a little problem with FileUpload.
When I used 'Browse' button for finding file. Path is written into Context. And I can upload selected file with using context.
but instead of using 'Browse' button, if I write path into textedit element. It doesn't work. How can I fix it.

Hi,
Im having a similar problem with the FileUpload element, with the difference that the page doesnt respond when I write something into the InputField element (that comes with the FileUpload element) without a \. In other cases Im able to catch the exception (if it isnt a valid path) and give a message to the user.
I understand the correct way of using the FileUpload element is with the help of the browse button, but I need to cover any mistake the user can make. Is there anything I can do?
Thanks

Similar Messages

Path problem for "Load VRML File.vi" in EXE

Hello,
The new integrated 3d Picture Control functionality in LabVIEW 8.20 is amazing. It is a really easy to use implementation of OpenGL. I've discovered one bug/issue when building VI's to an exe that includes the 3d Picture Control:
If "Load VRML File.vi" is used, in the executable, you will encounter a LabVIEW Error 7 due to a path problem in the following vi:
NI_3D Picture Control.lvlib:Load VRML File.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Read WRL file.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Initialize.vi
The File Not Found problem will prevent the vrml file from loading. Navigating down into the subVI's of the "Load VRML File.vi" shown above easily reveals the problem. I've included a screenshot of the diagram of that VI. The relative
path resulting from the double "Strip Path" operation is not valid
in the executable. I'm not sure where that "definitions" file resides
in the runtime deployment or if it's even included, so fixing the path to account for the differences in the exe vs. development environment path is not an option. I'm also usually very hesitant to make any mods to anything in vi.lib.
For the development environment, the "definitions" file can be found at: [LabVIEW 8.2 dir]\vi.lib\picture\3D Picture Control
The easy fix is to include the "definitions" file in the same directory as your exe when you build. Fortuitously, this does the trick because the first strip path gives the path to the exe and then the second strip path results in the path to the directory where the exe resides.
Hopefully NI will fix this path reference properly in future revisions.
Enjoy!
Attachments:
WRL Debug.jpg ‏77 KB

Hi Chris,
Thanks a lot for the feedback! This was reported to R&D (# 47F9DJIQ) for further investigation.
Regards,
Justin D

Path problem while refering the file in tomcat

In the jsp file i am going to update one property file which resides in the same folder using file output stream.
it gives path problem.how can refer the path of that file

try using getServletContext().getRealPath(java.lang.String path)..You can check out the API for more detail regarding this method.

Path problem when moving from Mac to PC

Adobenoob wrote:
Hi,
I'm trying to move our Adobe InDesign installation from Mac to PC, but I ran into a path problem. A lot of our publications/documents in Adobe InDesign have linked to pictures in the filesystem (Windows 2008 R2 server). It goes like this:
DTP:Produktbilleder:0893ny:0893_467+468_05_Agrp frit_.tif
And is linked like this directly from InDesign.
The actual path is:
/Volumes/DTP/Produktbilleder/0893ny/0893_467+468_05_Agrp frit_.tif
On the PC I cannot use that path notation and have to go like this:
F:\DTP\Produktbilleder\0893ny\0893_467+468_05_Agrp frit_.tif
When the publication/document in InDesign have the Mac link "hardcoded" the PC path will not work.
Is there a relatively easy way to get the InDesign on PC to use the Mac link or does one have to change all the "hardcoded" links in the publications/documents?
I hope you understand my question - don't hesitate to ask for more info.
Best Regards
Brian

Hi,
I have just tested the function - and it seems that the files have to be in the same folder. It is not recursive as I see it. And since we have tens of thousand of pictures in thousands of different folders it does not seem to work.
Any other suggestions?
Regards

Path problem in windows os

Dear friends,
some time I meet a strange class path problem under windows enviroment. that is, the class path uses "/" to splite directory while not "\". so java will report error message like "NoClassFoundError: com/boland/...". I think there should be a way to adjust this environment problem. but I don't know how to set this. I will greatly appreciate if you happen to know this and let me know.
Best wishes,
Sam

You reported an error in a package statement or reference. This is nothing to do with the OS folder structure per se, altho that is how it is implemented on a given platform like windows. Classpath statements are NOT platform independent, due to path separator issues. You should not use a system-wide classpath variable anyway, as this is really quite bad practice. Instead, create a run script for you program, and put the -cp switch in there. In any case, you should be referencing packages (separated by dots) in there anyway, not actual paths.

Path problem during Change of Original

Hello,
I am facing path problem while changing the Original file in a DIR.
let say i created a DIR x and attached file a.txt from c:\ and saved the DIR.
Now if i use cv02 and select a original for change the popup window comes with data carrier and original file path the path is shown as c:\a.txt which is actual original path.
if i click on continue it is opening the c:\a.txt files and changes are done on the original file on my pc.
This way my original file is changed on pc and in DIR also.
I want to know how to avoid this?.
Regards
Shiv

That is why they call it document "Management". The Original File is in the "Vault" where it can be managed, not on the desktop. If you want to protect/save the file on your desktop, set the flag in the config of the workstation application to not allow "rename" of the temporary file. You are just attempting to circumvent the intended design of the system. What you should really do is set the flag to "delete" the file after check-in.

File path problem

I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
I am doing this as an example so that I can apply it to all of my file problems....
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
pathexample.zip ‏122 KB

First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to <Filepath>\"Current path" . Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Help File Path Problem

Hi,
I recently upgraded to a new computer and I have Develope toolbox and some other extensions from Web Assist and curiously when I click on HELP button in any of them I receive in error message like the one below.....virtually all of the error messages are the same. I known that it is a path problem, but when I follow the path indicated in the error message I find the file exactly where it should be on the computer.....hmmmm...any ideas out there?
Firefox can't find the file at /MacHD/Users/jimelander/Library/Application Support/Adobe/Dreamweaver 9/Configuration/Shared/DeveloperToolbox/classes/temp.htm

I think un install ADDT then reinstall it..
Hope this helps
Mohnkhan
http://www.mohitech.com

Shortest path problem in ABAP

Hi experts,
Is it possible to write the code for the "Shortest path problem" in ABAP?If yes, what is the code?
Moderator Message: Don't expect members to spoon-feed you
Edited by: Suhas Saha on Jul 25, 2011 11:13 AM

Hi munish,
I dont think there is any thing wrong with the ABAP code.
Try testing your ABAP mapping using transaction code SXI_MAPPING_TEST in XI.
Enter the Details asked and then enter TEst data in XML format..
Also, you can make use of the Trace element to find out if there is any thing wrong with the code.
Include the following Statements after every step in the ABAP code to ensure that the particular step is completed successfully.
data : l_trace type string.
concatenate l_trace '<Message you want to display>' into l_trace.
trace->trace(level = '<level>'
message =l_trace).
The trace is visible in SXMB_MONI (click on "Trace" in the left pane to view).
using this you will get to know i the code is functioning as desired.
Regards,
Yashaswee.

Custom mySQL - updating path / problem with pre-installed mySQL

I've got a custom mySQL installation setup and humming along on a 10.6.4 server. The problem is although I've updated the paths to search on usr/local/mysql/bin, when I try to access by using the shortcut mysql i get this error: Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' . To be clear, mySQL is working fine - it's just the shortcut that's not.
This makes me think that the shell is looking first at the default [not enabled] apple mysql install. So something in my paths must be wiggy.
I had this working perfectly on my 10.4 Xserve but the no one, I'm at a loss.
Has anyone else run into this - any tips? I'm not going to be running the Apple install of mySQL.

Actually, my problem is not with the socket location but with the data directory location. But I think is caused by the same path problem to data as yours was with socket. I have posted this question to the Mac OS X Technologies > Unix forum. If you could take a look, I would appreciate it.
Thanks.

Help Files Path Problem

Hi,
I recently upgraded to a new computer and I have Develope
toolbox and some other extensions from Web Assist and curiously
when I click on HELP button in any of them I receive in error
message like the one below.....virtually all of the error messages
are the same. I known that it is a path problem, but when I follow
the path indicated in the error message I find the file exactly
where it should be on the computer.....hmmmm...any ideas out there?
Firefox can't find the file at
/MacHD/Users/jimelander/Library/Application
Support/Adobe/Dreamweaver
9/Configuration/Shared/DeveloperToolbox/classes/temp.htm

OleLena wrote:
> Firefox can't find the file at
/MacHD/Users/jimelander/Library/Application
> Support/Adobe/Dreamweaver
> 9/Configuration/Shared/DeveloperToolbox/classes/temp.htm
I'd check to ensure that you have the latest versions of the
WebAssist extensions as this may have been fixed. I seem to recall
seeing this issue when the primary browser (from Dreamweaver's
perspective, the one that F12 or preview in browser opens up) is
not open when the help is accessed. Try having your browser open
and then access the help.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Mirrored volumes pathing problems

mirrored volumes pathing problems
I am running Windows 2008 Server Datacenter.
I created some mirrored volumes with disk administrator.
These disk are in a fibre channel fabric.
All paths go down so disk administrator losses the disks.
All paths come up and disk administrator recovers the disks.
The mirrors all show as failed.
There are disks that show as failed, and disks that show as foreign.
When I import the foreign disks.
One of the mirrored volume starts resyncing, and the other mirrored volume comes up as 2 simple volumes.
Both mirrored volumes were in sync when the paths went down.
So I expected them to come back up as mirrored volumes when the paths come back up.
There is no I/O running at the time of the path failures.

So let me see if I understand correctly.
2 volumes presented to 2008 Datacenter via fibre channel
Volumes are then mirrored via windows
Disks drop off line and then the second mirror is 2 simple volumes but the first is rebuilding.
So question 1 - Is it for read performance that the disks are mirrored?
Question 2 - what disk errors appear in the event log when this happens
Question 3 - whats the HBA used in the server
Question 4 - Whats the backend staorage
Question 5 - Is MPIO being used?
Do we know the reason that the paths became unavailable? That would be probably my biggest concern.
Also when the simple volumes came back up was the data available?
Brad Held http://windorks.wordpress.com

I need to buy final cut pro software and i need it to support arabic writing the problem iam in germany the i tune here does not

i need to buy final cut pro software and i need it to support arabic writing the problem iam in germany the i tune here does not give you chance to choose the
language

If you want the menus and dialogues of the app to be in Arabic, that's not possible, there is no Arabic version of this software.
If you just want to write Arabic language titles, etc., the language of the app is irrelevant, the input of different languages is handled by the OS, and Arabic input is always available.
All Apple software is multilingual, no matter where you buy it. For example, the user interface for Final Cut Pro can be switched among English, Chinese, French, German, and Japanese.

Afp path folder want to delete, path writing gives problem

tell application "Finder"
          mount volume "afp://advo:[email protected]/Anup/Temp"
          if (exists "Temp") then
                    --                    do shell script "rm -rf afp://advo:[email protected]/Anup/Temp"
                    --do shell script "rm -rf Volume/Anup/Temp"
end if
end tell
I want change here do shell script "rm -rf PATH" path of my remote machine is ("afp://advo:[email protected]/Anup/Temp")
no error is there when above script run, but folder Temp is not deleted

further I modified this script to get path till Temp folder
but this folder is not getting deleted
set folderVolumes to "/Volumes/" as POSIX file as alias
set volumeNames to list folder folderVolumes without invisibles
tell application "Finder"
          mount volume "afp://advo:[email protected]/Anup/Temp"
repeat with theItem in volumeNames
if theItem contains "Anup" then
                              do shell script "rm -Rf /Volumes/MAC-PRO/Anup/Temp/"
end if
end repeat
end tell

Path Problem: Can't Load Database Settings From A File

I am writing a swing application with the following functionality: 
(1) There is a base class that supports things like changing the look and feel – this is done via a JDialog that loads all the installed lafs from which the user selects a choice. 
(2) Enables the user to set/change the physical database properties – location, password usernames and the like. - 
The idea is that when the application starts up for the first time the user will be asked to provide the database settings and then they will be stored in a file and then every time the application starts the settings will be loaded from this file. This works out fine!!!!!!!!! 
 
Now here is the problem: 
All the above is supported by an abstract class that extends JFrame (I’ve put abstract after testing) - MySuperFrame. After testing, I packaged this class together with other utility classes into a jar file. 
So my application which inherits from MySuperFrame fails on start-up with an exception that the database settings file cannot be found – And I know that it is in the jar file. 
+ 
I think that my problem is the path and nothing but the path – or relative path.+ 
 
This is the structure of my project: 
There is the src and the bin directories and then there is an external folder (not a package inside these two folders) called files (this is where my database settings file is stored). 
How do I solve this problem? 
How do I make sure my application loads the settings file regardless of where it is? I thought of passing the database settings file to a constructor of a database settings dialog class. But I don’t know how to sort out the path issue. 
 
Please give me advice on how to implement that?

Apologies for the bad formatting on the original posting. Here is the formmatted posting:
Hi All,
I am writing a swing application with the following functionality:
(1) There is a base class that supports things like changing the look and feel – this is done via a JDialog that loads all the installed lafs from which the user selects a choice.
(2) Enables the user to set/change the physical database properties – location, password usernames and the like. -
The idea is that when the application starts up for the first time the user will be asked to provide the database settings and then they will be stored in a file and then every time the application starts the settings will be loaded from this file. This works out fine!!!!!!!!!
Now here is the problem:
All the above is supported by an abstract class that extends JFrame (I’ve put abstract after testing) - MySuperFrame. After testing, I packaged this class together with other utility classes into a jar file.
So my application which inherits from MySuperFrame fails on start-up with an exception that the database settings file cannot be found – And I know that it is in the jar file.
+
I think that my problem is the path and nothing but the path – or relative path.+
This is the structure of my project:
There is the src and the bin directories and then there is an external folder (not a package inside these two folders) called files (this is where my database settings file is stored).
How do I solve this problem?
How do I make sure my application loads the settings file regardless of where it is? I thought of passing the database settings file to a constructor of a database settings dialog class.*{color:#ff0000} But I don’t know how to sort out the path issue.{color}*
Please give me advice on how to implement that?

FileUpload: writing path problem

Similar Messages

Maybe you are looking for