FileVault and TimeMachine simple question

I have a mid-2009 15" MBP running Mavericks, with an external TimeMachine volume.
I recently turned on FileVault. Everything seems to be working.
What I can't figure out and can't find, is whether the TM volume was also encrypted at the same time.
Obviously if it's not, this is not a good thing, and I'd want to encrypt it as well.
If it's not, then, can I tell FileVault to do it, and how do I do that?
If you can point me at a relevant bulletin I will be happy.
TIA

What I can't figure out and can't find, is whether the TM volume was also encrypted at the same time.
It wasn't.
If it's not, then, can I tell FileVault to do it, and how do I do that?
Choose a backup disk and set encryption options

Similar Messages

  • Imac and ram simple question

    I am getting a new imac in a couple of days, i aready have the 4gb of ram. The question is should i install it first, before i even turn on the imac????
    is there a site or directions that tells you how to install ram??

    It's a pretty simple procedure. The HOW can't be explained any better than in your little manual.
    You should run it for a few days (or at least hours) to make sure everything works properly, with the original RAM. Try everything, stress it a bit by running multiple programs, like an iTunes video podcast at the same time as playing a QuickTime HD movie trailer. Once you are satisfied everything is working fine, then upgrade the RAM.

  • JSP and JavaBean simple question, pls help

    Hello,
    I am new to JSP. I just installed Sun Java Studio Enterprise 8 to create a JSP project. I created a jsp file and java class file in the same project. the class file is in default package. I use <jsp:useBean id="date" class="DateFormatBean"/> in jsp file to call the java class. When I run the jsp page I got the error:
    cannot resolve symbol
    symbol : class DateFormateBean
    if I add a package in the class file, I got the error: package com.mycom.projsp does not exist.
    Also I tried to add a jar file into the library and tried to import it in my jsp page, I also got package doesn't exist error.
    I know I need to set the classpath and I did it, but still got the error. Could someone help me out? Do I miss some settings? I am using Tomcat.
    Thanks in advance!

    i'm not familiar with Java Studio Enterprise 8 so i'm not sure how it is organizing its project. However, i know tomcat...and if for test purposes you take your jsp file and put it in $TOMCAT_HOME/webapps/ROOT and your class file and put it in $TOMCAT_HOME/webapps/ROOT/WEB-INF/classes, things should work out. perhaps the web app isn't being organized properly in your tool.
    hope that helps.

  • Current Year and current month?simple question

    How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
    Thank you.

    i have a directory structre of the format
    REPTS2000209/E200209-98000001
    in which 2002 is current YEAR
    09 is current month
    and 9800001 is the code i would submit(list box) from a form
    so what i need is a program that can generate the above path and open that particular PDF file
    so basically E200209-98000001.pdf is the PDF file.
    i am submitting it from JSP page. PLEASE HELP ME how can i program.

  • This might be a simple question.   On those sites that do not differentiate between models when on the internet I.e. Facebook when after your comment and you cannot hit "enter" on an iPad for examp. And speed is slow to connect.  What is = to post?

    This might be a simple question. On those sites that do not differentiate between CRT, laptop, tablet etc. such as an iPad Mini and using the Facebook site fir example when going to post a comment and you do not have a enter button on the IPad and the speed is slow how do you get your comments to post if we do not have a enter button? 
    <Email Edited By Host>

    I don't have facebook so I cannot answer but for your personal security, I have asked the hosts to remove your e-mail address.   It is very unwise to publish this.

  • Simple question about telnet and characters

    Hi all,
    We've installed for the first time a SUN machine. So i think it's for a SUN expert a very simple question.
    Normally when i type a special character it will be dispayed like " � " [alt+132]
    But when i use a telnet session and i type "alt+132" i get a "d" and not "�".
    Does someone know where i must start to find out how this works ?
    Thanks you very much.
    ESP

    This is probably related to the locale your server is in. I don't remember the default locale a box is installed in if you don't specify. I think its "C". I use the UTF-8 or en_US.ISO8859-1 locales at home. At work, usually C but sometimes applications may require UTF-8. BEA Weblogic required this for a project a while back. This is defined in /etc/init/tz.

  • Simple question about flex and AS 3.0

    Hi, this might sound like a simple question so I apologize...
    I have both a copy of flex 2 and 3, and i want to simply code in AS
    3.0 not mxml. I referred to the help of both flex 2 and 3, and all
    i could come up with is "you can add dynamic behavior to your
    documents using actionscript", which means to me, you only write
    your functions in AS and create instances with mxml (...ugh).
    personally, i find mxml to be ugly (mainly because it looks like
    html to me), and i'd rather not use it. coming from programming in
    an IDE in Java, it seems like it would be nicer to have something
    similar, all the while having the power and cool features of flash.
    I'm not fully educated in this matter so i understand that i could
    be totally wrong.
    i mean, if i have to code in mxml, i will. i'm a web
    programmer for a living, and if a more experience programmer said
    something like "if you don't code mxml in flex, you'll never get a
    job coding in flex", i would trust the advice, and learn the ugly
    code. :)
    yes, i do have Flash cs3, it's great but it seems like a pain
    to me the way you organize classes.... i've only seen a few
    tutorials, ones that explain how you cannot simply import a custom
    class, you have tell your movie to link to it, put it in the same
    directory, or manually name the package, it's sort of confusing.
    my main point here is that i'm very eager to start building
    apps in straight AS 3.0 instead of using flash cs3 (for some
    projects), and it would be cool to get some help or be pointed in
    the right direction.
    to simplify:
    can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
    you link me to a tutorial? any advise?
    thanks!

    Hey William, thanks for the post. It's a great coincidence
    because I'm reading that book as well. I'm about half way through
    it, and I love it. I installed mxmlc on my linux box and am writing
    pure AS 3 apps. I think that's the way to go, though I know it's
    not for everybody.
    My problem with mxml is that it has a weird syntax for
    function calls, and it's not as 'intuitive' for a person like me,
    who came from C++ and Java programming in the past. I like writing
    programs in the C++ and Java style syntax, and since so many other
    languages use a similar syntax, I don't see any reason to learn the
    nuances of mxml, unless I was getting paid to do it. As far as I
    can tell there is no benefit.
    I hate using Flash to write flash apps as well, I feel like
    they become messy and confusing, especially when trying to write an
    OOP application. I only use it if I want to move an object in a
    very specific way and can't do it with the Tween methods.

  • Simple question about mount and delay script

    Hello, I have a simple question about mounting volumes on start up.
    My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
    I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
    set Uname to "XXX"
    set Pword to "XXX"
    set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
    mount volume someVolume as user name Uname with password Pword
    (same code for 2 other locations)
    When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
    Is it possible that I need a delay? Can someone explain this?
    How would I make a delay handler for this script? Is that the best solution?
    Thanks in advance. This is something small i'm wondering about.
    Colin

    BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
    Then the script would run in the background, so, you wouldn't see it running in the Finder.
    <http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
    Tom

  • Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

    Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

    If you are using Address Book, open it, create a new Group, select all you contacts by click the top one while holding down the shift key and then select the last one. Drag the contacts to the group, then send an e-mail to the group.

  • Audigy 4 and Reciever/Amp simple question

    Hi all,
    Despite inundating myself with what is probably TOO much information from the knowledge base and forum, I could really do with an answer to what is essentially a pretty simple question....
    I recently got an Audigy 4 sound card and external io hub. Lovely bit of kit. Very nice. I only really use it to watch the odd dvd and listen to music with WMP9.
    I have a Sony multi-channel receiver/amp with 5. speakers attached.
    The amp has multiple digital connections - all either optical or co-axial. (and individual 5. analogue too)
    These currently accept optical links from my dvd player and xbox. Lovely.
    So, I would prefer to use the digital connections (nice and easy cable approach as with xbox) but I think I'll only get 2 channels when I play dvd... So what is the best way to connect the two....
    Thanks
    Glen

    The thing about that kind of digital connection is that involves compressing 5. channels into the space of 2, using proprietary encodings. This makes sense in terms of storage space savings (i.e. more room on that DVD for special features), or if bandwidth is constrained (i.e. broadcast TV can fit 5. into the space originally designed for stereo), but the only way it makes any kind of sense for getting audio a few feet from the soundcard to a receiver or speaker system is because nothing more direct ends up being available. The result is that your xbox needs a high-powered chip to make something very (and unnecessarily) complex seem simple. Your Audigy does not have that; it does not have the ability to make that kind of 5. audio for your receiver to then decode.
    Your Audigy does, in fact, have the ability to output 5. digitally, in the digital space that 6 full-range channels need, using a single cable; but your receiver, like virtually all of such, doesn't accept it. CL digital speaker systems have a "Digital DIN" input which uses it, but your receiver does not have a "Digital DIN" input, nor any equivalent of that. Even if it did, there's still a problem, because it's muted for DVD-Audio's higher-resolution formats, purely as an effort to prevent consumers access to high-resolution digital audio signals that are not encoded, for copy-protection reasons.
    Because DVD 5. soundtracks are pre-encoded on the DVD, you don't need the Audigy to be able to encode. All that is needed is to get the soundtrack from the DVD to your receiver as is. The Audigy can do that. As the other post indicates, the keys are to tell the DVD player software to output digital, and to tell the Audigy not to decode.
    Under the covers, that actually uses the Audigy as a 2-channel soundcard, and the rest of its channels are "wasted." None of its real multichannel capabilities can actually be used with a "digital" connection like that. However, if all you do is watch DVD's and listen to stereo audio files, especially if your receiver has features to simulate full surround from stereo, you may not care.
    Personally, my strong preference is for the multichannel analog hookup, although I might set up both types so I could compare the sound of the receiver's decoding with the Audigy's decoding.
    Things you can't do when using an external decoder hookup:
    . Use the soundcard to adjust volume while listening to DD/DTS multichannel soundtracks (though it's best to use the receiver to adjust volume all the time, actually).
    2. Hear any other sound sources while listening to DD/DTS multichannel soundtracks.
    3. Get multichannel audio from PC games.
    4. Get multichannel upmixing using CL's CMSS feature.
    -Dave
    [email protected]

  • Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

    Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

        Hello flabucki,
    Help is just a post away for you my friend! I can help with your questions right here. May I ask what question do you have? Both myself and the community would love to assist in any way that we can.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Four simple questions on LOP, DateModifier, HolidayCalendar and PlanVersion

    Dear All,
    I feel for you people it's a simple question and not required to post 4 different threads.
    1. I create a LOP and a ML, how the system knows for LOP we have to deduct salary and for ML not required?
    2. Date Modifier: We create a date modifier, but where we mention specific date for the date modifier?
    3. Why holiday calender (or number range) can't transport? Why it 's not asking for a request while saving?
    4. We can create different plan versions. Once we create a new plan version and planed to use that. How to transport the data from one Planversion to another? Do we need to repeat all the process again, like position, person etc or we can transport?
    Regards
    ET

    1. I create a LOP and a ML, how the system knows for LOP we have to deduct salary and for ML not required?
    This is throught Absence Valuation that is Paid and Inpai which we configure in table T554C and assign the absence vlaution to the Absences the table V_554S_G
    2. Date Modifier: We create a date modifier, but where we mention specific date for the date modifier?
    Hmmm once you Generated the pay periods the dates are generated and stored in table V_T549S
    3. Why holiday calender (or number range) can't transport? Why it 's not asking for a request while saving?
    For holiday Calendar we have the Transport request which shd be done Manually check the truck button in the tcode SCAL
    4. We can create different plan versions. Once we create a new plan version and planed to use that. How to transport the data from one Planversion to another? Do we need to repeat all the process again, like position, person etc or we can transport?
    Can you littel more clear
    *I feel this are the doubts raised by you interview  questions are not allowed as per the Rules of SDN

  • Simple question I have Adobe Creative Suite in my office and I want to be able to use it on another PC in the same room  Is this possible?

    Simple question
    I have Adobe Creative Suite in my office and I want to be able to use it on another PC in the same room
    Is this possible? – more than happy to only use one PC at a time as I am now using a colleagues PC
    I would need a password
    I have my original End User Purchase Order

    Adobe ID, sign in, and account help
    If that doesn't work, try Web Chat:
    Adobe ID and registration support

  • Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices. If I change it on my iPad it changes on my iMac. Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

    Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices.
    If I change it on my iPad it changes on my iMac.
    Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Simple and maybe stupid question when you have two instances

    Just a simple question, I was just wondering how to create user account on the local machine when you run two instances of oracle.For example all the commands I use to start and stop the database use the variables stored in the oracle user bash_profile.
    But do I have to create another user to manage the other instance because it should use another bash_profile with a different oracle_sid?

    Linux and Unix installations of Oracle are kind-a funny. At the end of te installation is a request to run 'root.sh'. That does a few things: set up permissions and ownerships correctly; copy some scripts into the specified directory (default /usr/local/bin).
    If you were to look at /usr/local/bin, you would notice a few files, typically with names "dbhome.sh, oraenv.sh, oraenv.csh". These are designed to set up the PATH, the ORACLE_HOME and the ORACLE_SID correctly, based on user response and information in the oratab file - which is /etc/oratab in Linux. (I always ensure there to link oraenv.sh as oraenv)
    Longer story shortened:
    Assume you use(d) dbca to create the instances. Then you can source the oraenv.sh to set up the environment:
    pop2@fuzzy:~> . oraenv.sh
    [pop2]? orcl
    pop2@fuzzy:~> env | grep -i ora
    ORACLE_SID=orcl
    PATH=/opt/oracle/product/10.2.0/server/bin:/home/pop2/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
    ORACLE_HOME=/opt/oracle/product/10.2.0/serverThat way you can switch to any known environment simply by sourcing oraenv and telling it which SID you want. It extracts the info from /etc/oratab.
    You can tell oraenv to shut up by setting ORAENV_ASK to 'NO' and setting the ORACLE_SID variable before sourcing oraenv. This is useful in .profile - for example my /etc/profile contains the followig:
    export ORACLE_SID=XE
    ORAENV_ASK=NO
    . oraenv

Maybe you are looking for