FileVault doesn't log me automatically in after Migration Assistant

I've got a new MacBook Pro with Retina Display with Mavericks which initially I just setup without transfering information. Then I enabled FileVault. After restarting the EFI asks for my password to unlock the drive and then automatically logs me in. All is well.
Until I use Migration Assistant, that is. It set back a Time Machine backup from my early 2011 Macbook Pro without the 'computer settings', and now after the EFI password it dumps me at the Mac OS login screen. According to http://support.apple.com/kb/HT5989 I can choose to disable automatic login, but this key is not present on my system, so for all I know automatic login should work.
In console, I am seeing these suspicious-looking lines:
14-02-04 14:18:34,277 SecurityAgent[237]: Could not get the user record from OpenDirectory.
14-02-04 14:18:34,277 SecurityAgent[237]: Will sleep 3 seconds and try again (retryCount = 5)
This retryCount starts at 9, and would go a long way to explaing why I'm staring at the grey apple for so long at boot time. I should point out that I haven't set up anything OpenDirectory related: my account should be simply a local machine account, nothing more.
Has anyone encountered this before, or have any ideas how to solve this?

Settings/General/Restrictions - Require Password=Immediately

Similar Messages

After Migration Assistant, Time Machine refuses to use old backups

I've got to say I'm pretty disappointed with Time Machine.
I just dropped $2,000 on my second-ever Mac, a 15" MBP (Core i7 2GHz, 4GB RAM, 500GB 5200rpm hard drive, the stock low-end 15" config). From what I'd heard about Migration Assistant, I believed it would easily move my stuff over to my new Mac. For the most part it did, but a few things didn't transfer. Other posts on the topic detail them accurately - Desktop icon layouts, some settings, Growl, etc.
I told Migration Assistant to use my Time Machine backups, which have been happening without incident for a long time. My oldest backup is December 2010.
Now that my new MBP is about 99% set up like my old MBP, I am having a problem with Time Machine.
I get the error "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 355.61 GB but only 176.44 GB are available."
Looking at the Time Machine drive in Finder, I found that Time Machine is trying to create a new folder for backups and do a full backup. Where there was once one folder, "[My Name]'s MacBook Pro," there is now an additional folder, "[My Name]'s MacBook Pro 2." Time Machine is trying to back up into that second directory.
Now, I get it that this is a different computer. But really, if I use Migration Assistant to restore my Time Machine backup, I think it would be safe for OSX to assume that I want to continue using those backups. What is especially disappointing for me is, there were things that Migration Assistant did not restore properly. I probably haven't found them all. That makes it CRUCIAL that I have my Time Machine backups, but it seems that Apple thinks it's perfectly normal for me to want to FORMAT my Time Machine drive after Migration Assistant did a half-*** job of migrating my data. I need those backups now more than ever.
I do also have an online backup, but I still don't feel very comfortable destroying six months of local backups just to make Time Machine work again. Both MBPs were running the same (latest) version of Snow Leopard, so it stands to reason all that needs to happen is a very small incremental backup.
I have been Googling for hours. All I've found is a procedure for 10.5 that doesn't work in 10.6 where I get down into the Terminal and change a MAC address in a file on the Time Machine volume. But that's it. In fact it seems like there's no answer.
Come on Apple, you do everything else better than the competition. Why do I have to nuke six months of backups or buy a new 2TB external drive to make Time Machine work again? I assure you I want to continue making incremental backups against my old Time Machine backups, and promise to hold you not responsible should I screw something up by grabbing an old system file or something from February.
Would appreciate any help anyone could offer.

Did you use Setup Assistant when your new Mac first started up, or skip that, create a user account, then use the Migration Assistant app in your Applications/Utilties folder?
If you used Setup Assistant, when you started your first backup you should have gotten the message in #B5 of Time Machine - Troubleshooting. It sounds like you didn't (or chose Start New Backup). And no, the Leopard procedure doesn't work on Snow Leopard. That's what #B5 is for.
Usually, if you use Setup Assistant, Time Machine will still say it's going to do a full backup, and make room for it, but actually do an incremental backup (very, very slowly).
Either way, it usually deletes a lot of old backups. We're hoping that will be fixed in Lion.
Once it's decide to make a new backup, there's no known way to prevent it.

Login invalid on new MacBook after Migration Assistant

Migration Assistant problem
New computer: 15" MacBook Pro with Retina display (probably OS X Lion
Old computer: 15"Macbook Pro running Mountain lion.
My regular login password is invalid on the new computer after migration assistant - Not sure what to do.
Any help is greatly appreciated.
Thanks

I managed to find a solution
Here is the link:
http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
There are instructions to reset the mac password without a CD. You set up a new admin account then you can reset the password to your original account.
It solved the problem.

How do i merge my user accounts after migration assistant

Hello,
How do I merge my user accounts after migration assistant from a time machine back up?

I wonder how to plan what account and rights to have where?
I had my old original account on my iMac, and then I "migrated" the data to a user account, in order to have some advantages with that setup. So everything worked approximately ok in this setup.
And yesterday, I tried migrating to a new Mac, and suddenly I get aware of the fact that the rights on these two earlier accounts were important.
And especially, after doing the migration to the new machine twice, until I got the Mail working, I am now totaly bewildered what solution to aim for? How to merge the two migrated admin accounts - keeping the original admin account is also important, since my file system har special rights for that one.
Could anyone give me more ideas about how to proceed? I think I have working Mail on one of the two migrated account (with 100 000 mails or so, it seems so...). The other account is the one I would like to have.
Also I think I want to use a normal user account, not an admin account for my daily use. And I have to see if things still work if I turn off the admin rights...
Thankful for any advice!
/groundliner

Time Machine after Migration Assistant restore

During vacation, my MacBook pro’s hard disk suffered directory corruption so bad that neither Disk Utility nor DiskWarrior could repair it. I knew I had a recent Time Machine backup at the office, so I just reformatted my hard disk, reinstalled, and was up in running again in a few hours.
When I returned from my holidays, I used Migration Assistant to restore everything from the Time Machine backup, including users, applications, preferences, and other data.
I experienced several problems:
1. The Mac is bound to an Active Directory domain. After restoring users using Migration Assistant, domain users could no longer log in. I had to unbind and re-bind the Mac to the domain before domain logins worked again.
2. The newly re-installed and restored Mac no longer recognized the Time Machine backup as being a backup of itself. This caused additional problems because when I enabled Time Machine again, it tried to make a full backup, saw that there wasn’t enough space on the disk, and deleted all but the most recent backup from the Time Machine volume.
3. Migration Assistant failed to restore several very important files, including:
a. Finder preferences and desktop layout
b. Mail preferences, including accounts and signatures
c. Keychains, including passwords to WiFi access points and web sites
d. VPN settings
e. The Stickies database
f. Some Address Book contacts
g. The iTerm.plist file (from ~/Library/Preferences)
h. Lotus Notes Data (from ~/Library/Application Support)
i. Other application preferences & data
I was able to locate some of these files in the single remaining backup on my Time Machine volume. However, some were simply gone. The iTerm.plist file, for example, was nowhere to be found. This file contained several dozen customized iTerm commands that I will have to reconstruct from scratch.
4. Ever since restoring from backup, Mail has exhibited a problem wherein it sometimes displays the wrong message. It doesn’t do this with all messages; only some. For example, if I select the most recent message in my inbox right now, a message received in June is displayed in the preview pane instead.
Has anyone else observed problems like these? Is there any hope of recovering the backups that Time Machine saw fit to delete?

Pondini wrote:
Michael Lowry wrote:
2. Time Machine does not recognize old backups as being from the same computer if the Migration Assistant method was used to restore the computer.
Not exactly, but the result is nearly the same. When you erased the internal HD, it got a new UUID, so to OSX it's a different drive, and everything put back on it was considered as new, and Time Machine backed it up.
Ah, ok. So if I understand correctly, it was the fact that I reformatted the drive, and not the particular method I used to restore, that led to Time Machine deleting most of the backups. Is that right? I still find it very odd that right after restoring from a backup, the system doesn’t recognize that very same backup.
I suppose if I had investigated the matter more carefully and spent a few hours reading on the web, I might have learned about some properties file inside the backupdb where I could have manually tweaked the UUID after reformatting. But honestly, how would I have known this? I thought I did things according the proper procedure. When Disk Utility was unable to repair the drive, it displayed specific instructions to back up my files (done), reformat, reinstall, and then restore from backup. When I followed these instructions provided by Disk Utility, my Time Machine backup was rendered unrecognizable, and most of my backups were deleted without warning.
Moreover, I wonder again: how would a less knowledgeable user experience this?
I gotta say, this process could be made more user-friendly and the instructions & warnings clearer.
The iTunes Library was not restored.
Was it in the default location (the +<your home folder>/Music+ folder)?
I found the original iTunes Library on the backup disk; I restored these files manually and that fixed iTunes. All of the music had already been restored successfully. And yes, my library was in the ~Music directory.
Once I’d made iTunes happy, I was able to sync my iPhone. This brought back the missing Address Book contacts, because they were on the phone.
The Mail database appears to be irretrievably corrupted. I have no confidence any more that clicking on an item in the list will actually display that item.
Have you tried +Mailbox > Rebuild+ from the Mail menubar?
I hadn’t seen that option. That fixed it. Thanks!
This was my first time relying on my Time Machine backup, and I must say I am not satisfied. I work in IT and consider myself a power user; I hate to think how a less expert user would experience this situation. So much for “it just works.”
Ordinarily it does; this is quite unusual.
I'm a retired IT guy, and learned many years ago that all hardware fails, sooner or later, and no backup app is perfect, so I always recommend keeping (at least) secondary backups. It's not any help now, of course, but you might want to check out #27 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum) for some suggestions.
I’m not sure I will continue using Time Machine. I like the advantages (multiple versions, integration into some apps, nice UI); but I don’t know if they’re worth much if the backup is not reliable as a system backup. I wonder if an incremental Carbon Copy Cloner backup wouldn’t be better for my needs. A CCC backup would also give me one additional benefit: it would be bootable, virtually eliminating downtime and facilitating quick repair and restoration.
Thanks again for your suggestions. They have been informative and helpful.

Cannot Access Apple Website After Migration Assistant [SOLVED]

After using Migration Assistant, I was no longer able to access www.apple.com or download using Software Update on the new Mac from an account that was migrated. It turned out to be one or more obsolete Apple cookies.
If you're having this problem, do the following:
1) Run Safari.
2) Choose Preferences from the Safari menu.
3) Click Security.
4) Click Show Cookies.
5) Delete every cookie that starts with ".apple".

Well, my issue was completely in my network - in fact my Broadband router.
I have very simplistic acl's on my router that simply define timed access for the kid's devices (2 x laptops and 1 x iPod touch) - no blocking of websites by URL or anything fancy - just permit Internet access (by MAC address) between time A and Time B. And having realised that all 3 of these devices were suffering from various (and, strangely, different) connectivity issues (iPod Safari and 1 laptop couldn't get to Apple Website, whereas the other laptop could; 1 laptop could log into iTunes Apps Store, whereas other laptop could not; etc.), I decided to simply disable the deployed ACLs. And immediately the iPod Touch and 'associated' laptop could download iPod touch app updates (e.g. the reason for the original post), and also access websites that they couldn't previously, etc.
Also seemed to solve the iTunes Store access issues with the other laptop, although that device still has other connectivity issues....
So, anyone with a Belkin F7D3402 v1 running Firmware v1.00.51 (possibly UK only Belkin device - and which I have already reported to Belkin as having a buggy DHCP reservation implementation - i.e. it doesn't work!) - be warned: if you have ACL's defined, even without discrete/individual URL filtering, it might be affecting general Internet connectivity in a very random and weird way....
P.
Message was edited by: Paul Whelan
Message was edited by: Paul Whelan

New Mac is frozen after Migration Assistant finished!

I just got a new 13 inch MacPro the other day (Lion) and used Migration Assistant to transfer everything from my old 09 Pro (10.5.8). I restarted the new one after the transfer was done but nothing loads! I just see the background image (from my old Mac, so clearly the transfer did work) and the colorwheel. I tried waiting - couple of hours, nada. After shutting down manually and restarting the same thing comes up. Help!

10.7 doesn't run 10.5 software, so you should have only restored the user and nothing else.
Hold the shift key down while booting and log into the Admin user of the machine, then delete the other user.
Reboot normally twice and see if it works like it did before, if not.
Then hold the command and r keys down and boot, this enters Lion Recovery, use Disk Utility to erase OS X Lion and then get online (fast reliable Internet, wired preferred) and redownload Lion from Apple's servers.
If all this fails, simply take the machine back to Apple and let them do it.
13" is not a good choice for 3D gaming as it's all integrated graphics (scores 11), no powerful dedicated graphics card like the 15 and the 17" have (scores 30 and 45)
Just thought I'd warn you, perhaps you may consider upgrading to a cooler 15" with anti-glare screen.
https://www.youtube.com/watch?v=_X0wo6dIsMU
If you have your files on a regular storage device, not TimeMachine, then use that to restore manually with.
All you have to remmeber is to use the same user name as on the 10.5 machine and transfer files right into their same folders as before.
When itunes and iPhoto runs, it will upgrade the older libraries.

Serious problem after migration assistant - any ideas?

Hi folks-
I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
With gratitude and blessings.

The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

No logon after migration assistant for migrated account

I just installed a new SSD in my Mac Pro. Installed 10.8 Created a temp account. Upgraded to 10.9 Ran Migration Assistant and migrated profile from the original hard drive still installed. Everything transferred but no logon on is available for the migrated account on the logon screen. Logged on and off, same thing. How do I logon to the migrated account.

Is the migrated user data inside /Users?
Open System Preferences & check that if user is listed inside Users & Groups.
If it doesn't exist you can create a new user, just take care to make sure the 'shortname' matches the name of the users home folder. It should prompt you to 'reuse' the existing home folder, otherwise it will just create a new user & default home folder.

Migrated user not showing up after migration assistant.

I had to reformat my hardrive on iMac. When I did I installed Mountain Lion instead of Lion which was on it previously. I migrated all files/user id from Time Machine using the Migration Assistant. But now I can't see my old user at login or in User's and Groups. The files are there but I can't access them without being able to login or at least give my new user permission.
How can I get to the old user?
I enabled Root User and there seems to be an "unknown user". After this an option to log into "other" user came up at log in, but my attempts at a password and name to log in failed. This "other" user and the "unknown user" are NOT showing in Users and Groups.
Please help!

We don't recommend to use Migration Assistant because it sometimes fails, like in this case.
If you don't want problems, go with the long way: erase the drive, reinstall OS X and restore the backup during Setup Assistant:
1. Hold Command and R keys while your Mac is starting to start up into Recovery, and open Disk Utility.
2. Select Macintosh HD in the sidebar (or your OS X partition), go to Erase tab and erase the drive.
3. Close Disk Utility and reinstall OS X.
4. When the installation finishes, Setup Assistant will show up, so follow its steps. It will ask you to restore data from a backup or another backup, so plug your Time Machine backup to the Mac (or a Mac) and follow the steps. The only user will contain the transferred data.
If you want more information about Setup Assistant > http://pondini.org/OSX/SetupLion.html

Limited file access after migration assistant

After migrating files from a TM to a new HD for my MBP, I needed help from the Apple Community just the find the things tucked away in a new user folder. Now I need help getting them to open. Many folders have this little minus sign on them and say "You have no access" when I see their info. These are the most significant items and what I thought was the purpose of a backup. (Music, Pictures, Movies, Downloads, Deskstop, and my fav. "Silver Briefcase"), I have found the files on TM, so they do exist, but I am hesitant to click "Restore", as the files may already be on here somewhere. Please help make this "just work".

geologyjoel wrote:
Before getting this, I took it to a Mac-helper store. They had me make a new account and delete the two incomplete accounts so I could do a full restore and have only one account. They recommended restoring while in TM from that one account, shut down the computer, restart, open the restored account, and deleting this dumby-starter account. That didn't work: I got a "cannot complete this process. Error -8003".
That should work if, instead of using Time Machine to restore the account in question, you use Migration Assistant to transfer it instead. Restoring or copying the home folder from your backups won't work.
Trying your method: Pressing Command (the apple) - R resutls in a "No" sign as in "No smoking", and then my computer shuts off.
Do that after powering down.
Your profile says you're running Tiger (10.4.11). We know that's outdated, since Time Machine doesn't work on Tiger, but we don't know what you are running:
• If you're running Leopard (10.5.x) or Snow Leopard (10.6.x), you need to insert the the OSX Install disc (per section (b) of #14 and hold the "C" key while starting up.
• If you're running Lion (10.7.x) or Mountain Lion (10.8.x), you need to start from your Recovery HD, per section (a) of #14. Hold Cmd and the "R" keys while starting up (the Cmd keys are next to the spacebar on most keyboards).
If that doesn't work, hold the Alt/Option key while starting up. That will show all possible startup sources, something like this:
If you're on Lion or Mountain Lion, you should see either "Recovery HD" or "Recovery 10-8" (the red arrow).
If you're on 10.7.2 or later, your Time Machine drive may have a copy of the Recovery HD (the green arrow).
If there's an Install disc in your SuperDrive, it will be shown.
Select the one you want (the gray arrow should move), then click the drive icon to start from it.
EDIT: please tell us what version of OSX your Mac is running.
It would also be a good idea to update your profile, by clicking "Your Stuff" at the top of this page, selecting "Profile," and editing the "My Products" section.
Message was edited by: Pondini

Trackpad gestures not working after migration assistant

I just got a new 13" macbook pro for my wife. I initially created an admin account for myself and everything seemed fine. Then I ran the migration assistant to import my wife's account from her old macbook (~3 years old, running snow leopard). Now some trackpad gestures, like the 2 finger scroll, don't work in her account. Some do, like pinching and unpinching to zoom.
I've tried turning all the gestures off in preferences, then turning them back on again, but to no avail - 2 finger scroll doesn't want to work.
It seems like it must be some old trackpad settings that are overriding the new - her old macbook had the button and did not do gestures. But I don't know how to get rid of any imported trackpad settings so it will go back to default behavior.

Same thing happen to me. Had to go into iTunes folder and use old iTL file to get iTunes to open again. But after I did that my iPhone now isn't being recognized by iTunes and it wants me to wipe it. I also can't update to iTunes 11...I'm stuck on 10. It says I should update when I manually check for update but the store says there is nothing for me to download. This is so frustrating.

190GB Other after migration assistant? MBPr

I just bought a macbook pro retina, i used the migration assistan over wifi to restore my files.
After using the migration assistant i have over 190GB of other in my storage details.
On my old macbook pro i had about 40gb which was more on the normal side, What should i do?

I'm guessing that you've highlighted various folders and done a "Get Info" on them to see if there is really that much data in one of them? Like your Documents folder? If you can't find out what's eating up the space, I would back up your old Mac using Time Machine, boot from the Recovery partition and erase the drive and restore the system, and then use your Time Machine backup to restore. It seems as if something went crazy with Migration Assistant, doesn't it?
Clinton

Mountain Lion, CS3, license trouble after Migration Assistant

CS3 was working fine in Mountain Lion.
Used Migration Assistant to upgrade to a new iMac, also Mountain Lion.
Launched Photoshop CS3.
Got a message that said I have to reinstall, but I gather that the installer doesn't run under Mountain Lion.
So I tried lots of tricks from the adobe help website, including running the LicenseRecover.py script.
Now I'm stuck at the Software Setup dialog (where I have to enter the serial number), and I see the red X: license not valid.
What to do?
Thanks

Sivalli it sounds like when you used the Migration Assistant you attempted to have it copy over all files and folders. This has lead now to a compromised installation on the computer you have migrated too. The fact that you are receiving an error that the serial number is invalid is a good indicator of this.
I would recommend that you format, reinstall the OS, and then migrate over only your documents and settings. This should then allow you the chance to do a proper reinstall on the new computer.
You are certainly welcome to review the installation logs and try to repair the permissions on your compromised system. You can find details on how to review the installation log files at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html. You can also try running the CS Cleaner tool - CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html to also try to recover your current installation.

Serious issue after Migration Assistant

Hi all-
Looking for feedback as to what in **** might be going on with my MacBook Pro and how to proceed with it.
Last weekend I bought a 27" iMac for my home office. For various reasons I did not transfer data from my laptop at the time of setup, but the next night.
When I went to use Migration Assistant (after reading a bit on here about it), everything went fine until I actually entered the code the network code the iMac gave me and tried to start the transfer. The MacBook Pro wouldn't respond; the iMac told me it wasn't responding, and the MBP wouldn't quit Migration Assistant. Even after waiting an hour, Migration Assistant was still frozen, so I did a "hard" power off with the power button.
When I went to restart, the drive started, startup chimed, but the screen stayed black. I had to leave for work, so hard-turned it off again and left it alone. When I returned to it last night, I got past the black screen but it would stay in grey screen for around 7-8 minutes, then alternated every 10-15 seconds between a light blue screen with the spinning spokes wheel (not rainbow) and a slightly darker blue window with no spokes. It went back and forth like this for maybe 5 minutes, so I shut the MBP off again and went through the whole process a second time with the same result.
Since I live almost 4 hours from the nearest Apple Store, and Support was closed, I used my Snow Leopard disk to repair permissions - there were a lot of repairs. I then repaired disk, and was told the disk was fine. I restarted, same grey-light blue-dark blue issues, so reinstalled Snow Leopard.
After the OS reinstall, everything restarted and worked fine! I did a software update, then on the second software update (which as I recall was just java and iTunes) things went south again. When I restarted after the second software update the screen did the black thing again. Keys are lighting up, chime happens, but no screen.
The other thing that is different this time is that the green light on the power cable is not lighting up and I cannot seem to boot to the Snow Leopard disk, so I can't even get back to the post-OS-reinstall-pre-software-update stage again to get my data off the machine.
Not sure what to do next! This sound like a clear-cut issue of the X or the Y to anyone? Any feedback is appreciated.
With blessings,
Matthew

Did you use Setup Assistant when your new Mac first started up, or skip that, create a user account, then use the Migration Assistant app in your Applications/Utilties folder?
If you used Setup Assistant, when you started your first backup you should have gotten the message in #B5 of Time Machine - Troubleshooting. It sounds like you didn't (or chose Start New Backup). And no, the Leopard procedure doesn't work on Snow Leopard. That's what #B5 is for.
Usually, if you use Setup Assistant, Time Machine will still say it's going to do a full backup, and make room for it, but actually do an incremental backup (very, very slowly).
Either way, it usually deletes a lot of old backups. We're hoping that will be fixed in Lion.
Once it's decide to make a new backup, there's no known way to prevent it.

FileVault doesn't log me automatically in after Migration Assistant

Similar Messages

Maybe you are looking for