FileVault Stuck Decrypting (Among Other Issues)

Recently I made the mistake of trying out FileVault to encrypt the files on my MacBook Pro. Unfortunately I came to realize that this is a very tedious process that can take days to complete and slow down the performance of my machine. After trying multiple methods to either speed up the encryption process (which initially changed back and forth from "estimating time remaining" to "106 days remaining") or begin decryption through recovery mode and disk utility, I'm now stuck with a FileVault decryption status that's stuck, and a near useless computer.
im currently attempting to backup using Time Machine onto an external drive in order to do a full restore (since as far as I know that's the only true solution to the problem). Only issue is that it backs up depressingly slow (about 1 MB every 10 minutes, with a total of 224 GB to back up).
If there's anyone out there that could perhaps give me insight on how to repair this issue more smoothly, that'd be great.

A
There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
If you use FileVault 2, then you must first unlock the startup volume. Select its icon ("Macintosh HD," unless you gave it a different name.) It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. Enter your login password when prompted.
2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
B
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

Similar Messages

Photoshop CC not displaying correct image sizes, among other issues.

Hey, so I'd like a bit of help here!
I got my new laptop from the school a couple of weeks ago and photoshop’s been funky ever since I got it. It’s a brand new Macbook, and it's running Photoshop CC.
First things first, it won’t recognize some of the brushstrokes I make. It will show that I've made them, but they won’t show up in the history panel. I'll have to make another stroke for it to register both of them. (Making undoing things a real pain.) Also, some of the keyboard shortcuts I use won't work in a really similar way. If I go to switch to my brush by pressing b, it occasionally won't register it unless I make an additional brush stroke. This works with all of the other shortcuts I use.
In addition, file sizes are all kinds of messed up. Here’s the most recent example. The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
Here’s another example. This one is 1254 x 1201, 300DPI, 8bit, RGB, shown at 100% zoom. The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M. I don’t feel like that’s right? I don't remember any other versions of Photoshop having images be that large.
Maybe it’s my computer settings? Right now I have the resolution set on "best for display," but even if i use the "scaled" option and change sizes, the images are still too small.
I don't know if I would be able to uninstall and then re-install Photoshop because the school has control over those sorts of things and there are certain programs that you cannot remove. I've tried restarting the program as well as the laptop, but neither of those helped.
if anyone can help me, I’d really appreciate it! Thank you!

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

LE8 won't remember audio recording path (among other issues...)

Why won't LE8 remember the audio recording path I set for each project? Each time I open a project I've been working on (by dropping the project onto the LE8 icon in the dock-LAME) and arm a track to record, it says that that the path to the external HD is not found (-but it knows the name of the external HD somehow). I'll then open the record prefs, set the recording path correctly to my external HD and the coressponding folder, save the project, and record without incident (or at least the same incident) for the rest of my session. The next time I open the project the same thing happens.
LE7 never had this issue.... weird and annoying.

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

IPhone won't make or receive calls, among other issues

So I've been having a lot of problems with my iPhone 3GS. About 80% of the time it won't make calls, and about 50% of the time it won't receive calls. I'll only know if someone called me if they told me they called or left a voicemail. Every single time this happens I have full service. It's also started getting really picky about sending texts.
I'm basically fed up at this point. I'm on my second sim card, I've taken my phone to the Apple store three times, and I've been turning it off, resetting it, and switching airplane mode on and off as a last resort. I kind of need my phone to make calls, which it for some reason does not want to do. Any suggestions anyone has about what to do are appreciated.
Also, my phone has been having issues when it's been plugged in. I've been using the wall charger that came with the phone, yet I've gotten the message after plugging it in that it is a device that doesn't support charging. It constantly vibrates while it's plugged in as well, as though it's being unplugged and plugged back in and takes a really long time to actually charge (I had it plugged in for about 20 minutes and it went from 52% battery to 53% battery). I don't know if this is an issue with the phone or if the cable just died on me.
Either way, this is really obnoxious. I can't wait until my contract is up so I can get an Android.

Try cleaning the connector on the bottom of the phone. A dry toothbrush is a good tool to use. Also inspect it with a magnifying glass to make sure there are no bent pins.
You might also have a bad cable.
For the other problems have you Restored the phone and set it up as a new phone?
And I have to ask, just to confirm, the phone is not jailbroken, correct?

Firefox being redirected among other issues.

When using a search engine (Google, Bing) and I click on a link, I get redirected to some bogus page that has nothing to do with what I'm looking for. Also when on Ebay, I clcik the "add to watch list" link and it won't do it. The pics on the pages also will disappear after only showing for an instant. I have use IE and Chrome and they do not do this. I think this is totally a Firefox issue. I want my Firefox back. I hate IE.

It could be some extension has changed your firefox settings, but if you are getting results unrelated to your serach it may be malware. see
* [http://support.mozilla.com/en-US/questions/773501#answer-126946 thread] ''Search bar causes browser to be hijacked''
*[[Is my Firefox problem a result of malware]]
* and if you have problems with a Bing bar, courtesy of MS, see [[Removing the Search Helper Extension and Bing Bar]]

Capsule Not Picking Up IP Address (among other issues)

I just received my brand new Time Capsule, and am having a heck of a time getting it working.
I have an existing network with 3 Express stations. I unplugged them all, plugged in everything to the Time Capsule & cranked it up. In the set up, I asked it to get the settings from my existing network. Well, first it appeared to set up fine but it failed to establish an internet connection, then I couldn't even see it in Airport Utility. I unplugged everything and went back to my old config, and couldn't see any of my Express stations in Airport Utility either until I restarted my iMac.
So I thought I would try using it to create a brand new network. I reset the Capsule, plugged in just the power, and went through the process of creating a brand new network with the Capsule as the base station. Part way though the process, I plugged in the cable modem to the Capsule. Configured using DHCP, it seemed OK, but it still couldn't establish an internet connection. Then it disappeared from being visible in Airport Utility again. I moved the ethernet connector back to my Express base and all was fine with my old network. I restarted, and still can't see the Capsule as a device in Airport, much less back up to it.
So I can't get my Capsule to stay visible to Airport Utility for more than 2 minutes, and when it is running, it won't pick up an IP address to connect to an obviously live port.
Now what? Right now, it's as useless as a brick. Apple used to be so straightforward, but this is anything but.

After two weeks of trying, I still can't get my Capsule to stay visible to Airport Utility for more than 2 minutes, and when it is running, it still won't pick up an IP address to connect to an obviously live port.
Since no one on this forum has suggestions for a fix, should I ship it back to the Apple Online store to get my money back?

Can't open quicktime control panel...among other issues w/ QuickTime/iTunes

I download itunes and then try to open it and before it opens and error occurs causing it to close. all other apps seem functional except quicktime. I can't open it under control panel (An exception occurred while trying to run “C:\WINDOWS\system32\shell32.dll,Control_RunDLL
“C:\WINDOWS\system32\QuickTime.cpl”, QuickTime”) and when I try to open it from the START menu I get "QuickTime failed to initialize. Error # - 2095". Any ideas on how to fix this so I can get QuickTime and iTunes working? Thanks for the help.

I have exactly the same problem!!
Been on this site since Dec 26th and still can't get ipod to work.
You would think Apple would have a help line!
If you solve yours please let me know how you did it, and I will do likewise.
Thanks
Pat Mahoney

I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

ITunes freezes when iPod touch 4G is connected + other issues.

I've seen a lot of people struggling with this problem and I'm afraid I got stuck with the same issue. I'm not sure when it started, but I noticed any time I connected my ipod touch 4G to my computer, iTunes freezes almost immediately. When I disconnect, it goes back to normal (most of the time) and displays a message that says: "An ipod touch has been detected but cannot properly be identified."
I tried reinstalling iTunes 5 times, all of which it comes up with what I suppose is an installation error. When I click ok on the error, installation continues as if nothing has happened. There's also been an update for iTunes but it won't download. (Note: my laptop runs Windows 8.1).
On the website, it says iTunes is 64-bit but when I download, it runs 32-bit. I don't know why this happens (I'm not exactly tech savvy) and I don't know why iTunes freezes. I also cannot manually restore my iPod as a lot of people suggested as my home button is stuck. I'm out of options unless someone saves me... and my need for my music. I've been through many forums and nothing worked.
Can anyone help?
Side note: my ipod also seems to be going through USB chords like nobody's business. It's not negligence on my part, yet they always start causing my ipod to say "charging is not supported with this accessory" then completely stop working. I had one that barely lasted a day! I'm fed up with all these problems and hope someone can help.

Thank you,
Pretty much all of the posts in that link deal with PC problems, drivers and bios stuff. Since I am running on a Mac, I don't think there is much I can do to deal with those kind of issues.
I don't seem to have any other problems with USB connections to other devices, and my iPod does work with iTunes for at least a short while after I wipe it and start over. This leads me to believe it is less of an USB issue and more something to do with software on either the iPod and iTunes. I am beginning to suspect either something with an App or using the onboard iTunes Store to download content that is somehow corrupting the iPod.
In the past, I had problems with the sync taking an inordinate amount of time to back up, which after months of research I learned that it most likely had something to do with downloading an App from the App Store on the iPod in the early days of the App Store (A problem I was never able to eliminate despite numerous restores, due to the corrupted App being re-loaded every time I used the backups. I WAS able to eliminate the problem after deleting and re-downloading all of the Apps when I nuked my iPod). My problems with not being able to sync happened shortly after I downloaded an App from the App Store (something which I refrained from doing due to fears of corruption!).
I dunno, any thoughts on this?
P.S. I am still waiting for an answer as to the fate of the content I downloaded on my Ipod. If I restore my iPod without transfering the purchases, are they ultimately lost?

Optiplex 9020, Intel 4600 + AMD video card = bluescreens and other issues for dual monitors

Our organization purchased a number of 9020s with the onboard Intel and the AMD 8490
Over time, many of these systems would experience video issues. Originally they were configured with one monitor was plugged into the intel VGA and the 2nd monitor was plugged into the AMD DVI. output
Among the issues were bluescreens. When dragging something from one monitor to another, there would either be another bluescreen or other graphical glitches. Despite uninstalling/reinstalling both drivers these issues would persist. Eventually we tried moving both monitors to the Intel outputs, issue still persisted, then we tried moving all the monitors to the AMD ports, issue still persisted. Eventually we removed the AMD card entirely. That seems to have corrected the graphics issues. That being said, I don't think the issue is faulty hardware, about a dozen systems have exhibited this issue so I am doubting that each one of them all have faulty hardware. I suspect a driver problem somewhere. The Intel driver and/or the AMD driver don't seem to play well with each other.
This issue has persisted across both the AMD 8490 and the AMD R7 250 cards.
Our organization is locked into certain configurations, so at present, we are unable to order PCs without the extra card. The extra card hasn't been needed once onboard cards started gaining the ability to do multiple monitors.

Win7 64 bit. We haven't had the blue screen in a while so I don't have the specific message, but it did reference an AMD file. Drivers have been uninstalled/reinstalled numerous times.
Latest issue is that when the user steps away from the computer and the monitor goes into powersave after 30 minutes, when the user returns the monitors will turn on, but the screen stays dark.

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

Filevault stuck at pending

I have a new MacBook Pro. When I started it, I choose activate filevault. Now the filevault stuck at pending. Any recommendation?
Thank you

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

IRQ Conflicts and some other issues

I have a K7N2 Delta-L mobo with an XP2400+ and an MSI FX5600-VTDR128, the reason for this question is that I have some problems, the first of them is at the system information page of XP:
=================================================
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF   NVIDIA GeForce FX 5600
IRQ 20   Standard OpenHCD USB Host Controller
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 22   Standard OpenHCD USB Host Controller
IRQ 22   NVIDIA nForce MCP Networking Controller
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF   NVIDIA GeForce FX 5600
I/O Port 0x000003B0-0x000003BB   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB   NVIDIA GeForce FX 5600
I/O Port 0x0000C000-0x0000CFFF   PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3
=================================================
Looking at this it looks pretty bad if you ask me :(
But when I look at device manager I see no conflicts and every device that's listed here does not have any conflicts reported, anyway here are my IRQ (according to System Information)
===========================================
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   NVIDIA nForce PCI System Management   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 17   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3   OK
IRQ 19   NVIDIA GeForce FX 5600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA nForce MCP Networking Controller   OK
===========================================
So, my first question is obvious, what's wrong with my system?, am I missing some BIOS setting?, I believe APIC may have something to do, but this isn't the case because it is enabled (at least it says so in BIOS). I have the latest BIOS for this mobo (5.40)
The second issue is something strange that Sisoft Sandra keep telling me: "SMBIOS/DMI information may be inaccurate", an here's what the help says:
=================================
Notice N224 - SMBIOS/DMI information may be inaccurate. This information is reported verbatim and cannot be checked by Sandra. While brand-name companies set this information most generic manufacturers use generic data that is meaningless. This issue generates more technical support queries than all other issues combined.
Fix: If the information is not correct, check for a BIOS update (clear DMI pool) or fix any errors using the DMICFG tool provided with the board. Alternatively, disable Sandra’s DMI/SMBIOS reporting from module Options.
=================================
Is this "normal"???
Anyway, I hope any of you to be able to help me.
Thanks in advice,
Fernando

Although I am unsure as to what is exactly your problem, but from what I see everything seems ok
Regarding the Sisoft Sandra remarks, don't worry about it.
Regarding the Computer in Device Manager
Try changing it to
Advanced Configuration and Power Interface (ACPI) PC
This has not given me any problems at all.
Here is my system example
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   Standard OpenHCD USB Host Controller   OK
IRQ 5   NVIDIA NForce MCP2 IDE Controller   OK
IRQ 5   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 5   NVIDIA GeForce FX 5900 Ultra   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   Standard OpenHCD USB Host Controller   OK
IRQ 10   NVIDIA nForce MCP Networking Controller   OK
IRQ 10   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 11   Standard Enhanced PCI to USB Host Controller   OK
IRQ 11   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 11   WinXP Promise FastTrak 376 (tm) Controller   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK

It seems cranky sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any help

Not in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer.

FileVault Stuck Decrypting (Among Other Issues)

Similar Messages

Maybe you are looking for