Filing Bug Reports in Configurator

I spend a lot of time looking at the logging in Console that comes from this app, and I have a few uncaught exceptions and Crash Reports that I can recreate consistently. Can I file bug reports with Apple? Where do I file bug reports? I have seen the Apple Bug Reporter, and there is no clear product type that matches Apple Configurator (iPad, iPad SDK, App Store, Other) and I am not sure if this is even seen as official. Anyone does this before?

Please do file bug reports using Apple Bug Reporter and they will be routed to the Configurator engineering team. Provide as much information as you can about the problem, what specific actions you take that cause it to occur, versions of all relevant software (Configurator, OS X, iOS, etc.), and anything else that seems relevant.

Similar Messages

Filing Bug Reports With Apple?

I SWEAR Apple is getting more and more like Microsoft.
Can some one PLEASE tell me how to file a BUG REPORT to Apple on the 10.5.3 update? I am getting graphic driver problems again like they were on 10.5.0 and 10.5.1.
Contacting Apple with a direct bug report seems near impossible and the website is of little help in finding this information. I am outside of Apple Care support.
10.5.3 graphic drivers are broken again on a "Dual 2HHz Power PC G5" with the following Graphics Card:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Bringing up the Save Dialog for e-mail attachments for Apple Mail 3.3 (924) cause the background to totally go wacko but it is restored when the save dialog disappears.
Message was edited by: Confused7766

Register for a free online developer account with your AppleID you used to sign on this board. http://developer.apple.com/
Then go to http://bugreporter.apple.com/ and login there to file your bug report. Note, any discoveries there you are under a non-disclosure agreement.

Did you know that Google toolbar doesn't work properly in FF rc1? I have filed a bug report to Google about this

The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Bug Report: Shortcuts for Adjustments in 3.1

I have verified that bug with a brand new test account (Aperture 3.1 and OS 10.6.4 with latest Pro Update):
- Make an adjustment to an NEF-file
- save that adjustment as a preset
- assign a keyboard shortcut to that specific adjustment
Switch to the next NEF-file and make your usual adjustments:
- initiate that shortcut to apply the already saved preset/adjustment
All of a sudden, all already applied adjustments are set back to defaults!!!!
To sum up:
Shortcuts are presently not useable!
Bug Report was filed!
Any observations???

I got it myself. My shortcut combination contained the option key. That causes AP to replace any adjustments already made to the image. You have to use a keyboard short cut combination without the option key.
The question is, why AP 3.1 is not smart enough to refuse such a combination??? In version 3.0.x everything worked fine!!!

Bug report: A keyboard layout is incorrect on the remote with Japanese keyboard

This is a bug report for Microst Remote Desktop
===================================================
## Summary
A keyboard layout is incorrect on the remote with Japanese keyboard
## Version Information, I tested
* Client
   * Case 1
       * MacBook Pro with JIS106 Keyboard
       * Mac OS X Lion 10.7.5
       * Microsoft Remote Desktop 8.0.24308
   * Case 2
       * MacBook Pro with JIS106 Keyboard
       * Mac OS X Mavericks 10.9.1
       * Microsoft Remote Desktop 8.0.24308
* Remote
   * Case 1
       * Windows 7 Professional Japanese
   * Case 2
       * Windows Server 2008R2 Datacenter Japanese
   * Case 3
       * Windows Server 2012R2 Datacenter Japanese
## Detail of bug
When login from Mac OS X with Microsoft Remote Desktop, the keyboard layout is always incorrect on the remote.
The client machine have a built-in keyboard of JIS 106 layout,
and the primary language is set to Japanese.
But on the remote, the keyboard layout is US 101.
So a input of Shift+2 does not result " but @.
I've seen the above behavior on the 3 remote enviornments described the above.
This bug did not occcur with Microsoft Remote Desktop Connection Client for Mac 2.1.1, even if the system language is English and keyboard layout is Japanese.
## Captures
I've took some of screen captures.
I'm sorry for the capture includes Japanese words, so I added description in English.
Capture 1:
Mac OS X Keyboard Setting
Capture 2:
Windows Server 2012R2 Screen Keyboard
Capture 3:
Windows Server 2012R2 Screen Keyboard, with a additional registry key configured.

This bug also affects the Canadian English settings. If the client is set to Canadian English with a US keyboard the remote server is setup using a Canadian French keyboard. Using the language selection in the toolbar you can temporarily correct
the problem but the keyboard resets to french at the most inopportune times. The was a problem in the earlier RDP client and was fixed so it's sad to see it reoccur in the new client.
Lawrence

Bug report, Beta 2.12 Standard Edition

Bug report: redundant, confusing, and apparently erroneous calls to
jdoPreClear
and jdoPostLoad. Note in output the null name in the third iteration.
Hi,
A lot of information being sent. Sorry, but I think you'll find it
helpful. I expected the exact same sequence of calls to jdoPreClear
and jdoPostLoad on the 2nd and third iteration. In fact, since,
retain values is true, and no changes are being made, I expected that
jdoPreClear and jdoPostLoad would not be called at all on the 2nd and
3rd iteration.
David Ezzio
Using 2.12 Beta, standard edition
Business method uses one PM. Configured to datastore transaction,
retainValues == true, non-TR == false, and non-TW == false.
The business methods open a transaction and leave it open.
The client calls commitTransaction() to close the open
transaction.
Two persistent objects, Widget and Box. Each implement
InstanceCallbacks and put out a message in jdoPreClear ("will be
made hollow") and in jdoPostLoad ("has been made persistent-clean").
The Widget has a reference to its Box. The number in parenthesis
is the sequence number obtained from the object ID.
Business methods implementation:
public ArrayList getWidgetsByName(String name)
Transaction trans = pm.currentTransaction();
if (!trans.isActive())
trans.begin();
Collection c = (Collection) widgetsByOneName.execute(name);
ArrayList aList = new ArrayList(c);
widgetsByOneName.close(c);
return aList;
public void commitTransaction()
Transaction trans = pm.currentTransaction();
if (trans.isActive())
trans.commit();
Output: from three loops that:
call findWidgetsByName("Maxi-Widget")
list the widgets returned
call commitTransaction()
finding Maxi-Widgets ...
Widget Maxi-Widget (650) has been made persistent-clean
Box Large (652) has been made persistent-clean
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget Maxi-Widget (709) has been made persistent-clean
Box Large (710) has been made persistent-clean
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget Maxi-Widget (708) has been made persistent-clean
Box Large (713) has been made persistent-clean
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget Maxi-Widget (700) has been made persistent-clean
Box Large (717) has been made persistent-clean
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget Maxi-Widget (707) has been made persistent-clean
Box Large (716) has been made persistent-clean
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
Finding them again
finding Maxi-Widgets ...
Widget Maxi-Widget (650) will be made hollow
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget Maxi-Widget (709) will be made hollow
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget Maxi-Widget (708) will be made hollow
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget Maxi-Widget (700) will be made hollow
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget Maxi-Widget (707) will be made hollow
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
Finding them yet again
finding Maxi-Widgets ...
Widget null (650) will be made hollow
Widget Maxi-Widget (650) has been made persistent-clean
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget null (709) will be made hollow
Widget Maxi-Widget (709) has been made persistent-clean
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget null (708) will be made hollow
Widget Maxi-Widget (708) has been made persistent-clean
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget null (700) will be made hollow
Widget Maxi-Widget (700) has been made persistent-clean
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget null (707) will be made hollow
Widget Maxi-Widget (707) has been made persistent-clean
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
-- All done!

Due to better understanding on my part, and the fixes in Beta 2.2, the
issues raised in this thread are put to rest.
Abe White wrote:
>
We'll investigate further. Stay tuned...
"David Ezzio" <[email protected]> wrote in message
news:[email protected]..
Abe,
Actually, it doesn't make sense. The first iteration shows
jdoPostLoad is called just prior to using the fields of Widget and Box.
After the commit, the instances are not cleared. So far, so good.
In the second iteration, we see that jdoPreClear is called, but
jdoPostLoad is not called. Yet the values are there for use during the
call to Widget.toString() and Box.toString() within the iteration. How
did that happen?
On the third iteration, now the value of name is null, but last we
looked it was available in the second iteration. Other than that, I
agree that the third iteration looks ok, since it is being cleared and
loaded prior to use. But in the jdoPreClear, the values should be there
since the values were used in the previous iteration and are not cleared
at transaction commit due to retainValues == true.
David
Abe White wrote:
David --
I believe the behavior you are seeing to be correct. Section 5.6.1 of
the
JDO spec outlines the behavior of persistent-nontransactional instancesused
with data store transactions. As you can see, persistentnon-transactional
instances are cleared when they enter a transaction; thus the calls to
jdoPreClear. When the default fetch group is loaded again (like whenyou
access the name of the widget) a call to jdoPostLoad is made.
You are seeing the name of one instance as 'null' in the third iterationof
your loop because the instance has been cleared in the second iteration,and
the jdoPreClear method is not modified by the enhancer (see section10.3).
Make sense?

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR....

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR.
The spa-3102 has the following two bugs.
When the unit sends a hook-flash to the fxo port it:
a) does not send the hook flash to the fxo port for PSTN Hook Flash Len: Instead it uses a very short pulse of about 100ms or 1/10 of a second. It should honor the PSTN Hook Flash Len configurable parameter of .2 – 1.5 seconds.
b) Does not change the line voltage from –7 (off-hook) to –48(on-hook) during a flash-hook to the fxo port. Instead it varies the voltage only by about 2.5 volts.
This was reported as early as June 07 to linksys support. It is reported they agreed and would fix in the next firmware release. There is info that firmware 5.2 being released and is this fix in 5.2 and how can I get it.

Although the problem is still not solved, at least I now know WHY the problem is happening... and Apple's Firmware Update is NOT to blame!
Through a series of coincidences, I was actually lucky enough to get in touch with the engineers in Apple's Airport firmware division, and they were helping me to nail down this problem.
Turns out that Apple takes great PRIDE in the fact that they are one of the VERY FEW manufacturers who make routers that behave properly in this regards: they SPECIFICALLY test for their Airport Extreme routers to allow you to connect to servers behind the NAT by way of the public WAN IP address of the NAT box. This is the way that apparently the NAT/DHCP specification is SUPPOSED TO WORK! You're SUPPOSED to be able to connect this way, if you so desire.
So what was causing the problem on my network, then?
Something I hadn't thought about... the Vonage Linksys RTP300 router that we're using for our Vonage VoIP service. Turns out that this router does NOT support clients behind the NAT connecting to servers behind the NAT by way of the public WAN IP address.
Linksys is to blame, not Apple!
And apparently, this feature may have actually been working in an earlier
firmware update, but apparently, Vonage AUTOMATICALLY pushes firmware
updates to RTP300's, apparently without user notification:
<http://www.vonage.com/help.php?article=1066&category=90&nav=5>
And a forum thread on vonage-forums.com seems to indicate that the 1.00.60 firmware in the RTP300 started getting pushed to customer units on or before 1/26/06, making it less than a month after Apple shipped the 5.7 firmware update for AirPort Extreme Base Stations:
<http://www.vonage-forum.com/ftopic10915.html>. So if the problem cropped up then, it's possible that I accidentally attributed it to Apple when really the RTP300 got a firmware update around then too which may have broken this feature (assuming it was working before then).
Power Mac G4 QuickSilver Dual 800 MHz Mac OS X (10.4.4)

The new Synaptics UltraNav: a few workarounds and minor bug report.

I only wanted to file bug report, but then decided to also share what I did with my touchpad configuration to make it more convenient for me. I have Thinkpad T540p so this might work differently or not work at all for other notebooks.
#1 Regedit
Configure as much as you can using UltraNav tab in mouse settings dialog. (It is mostly self-explanatory.)
If you didn't find some option, start regedit (using Win+R) and navigate to
HKEY_CURRENT_USER\Software\Synaptics\SynTP\something
This something is TouchPadSMB2c on T540p but you can find one you need by changing something in settings dialog and looking for changed values in regedit.
All the touchpad configuration registry keys are there. You need to relogin to apply changes made there.
But it might take a lot of trial and error to find out how these registry keys work.
#2 3-finger tap
As for me, I prefer tapping over clicking. While 3-finger press option is in settings dialog, 3-finger tap is not. But you can change it.
Set whatever option you want for 3-finger press. Then go to regedit and copy value from 3FingerPressButtonAction key to 3FingerTapAction.
#3 Button sizes and locations
You can change button bounds with keys like LeftButtonZoneX where X is L for left, R for right, T for top and B for bottom bounds. 0xFFFFFFFF ultimately means "unlimited in that direction". For finding other values defaults might be helpful. Trackpoint buttons keys are SlaveSomeButtonZoneX.
What for?
First, trackpoint buttons can cover the whole trackpad only when trackpad itself is disabled. By changing button sizes manually you can overcome this restriction. It is useful because trackpad does not respond well to pressing corners and when buttons cover it all you can press it somewhere in the middle.
Second, the same corner pressing problem exists for normal trackpad buttons so it is more convenient to use multi-finger taps or clicks. You can still hold trackpad pressed with one finger and use yet another finger to move mouse pointer.
At the same time when you tap or press with multiple fingers and one of them touches one of the buttons you get that button pressed instead of whatever you intended. It frustrated me a lot when I got context menu popups while trying to close chrome tabs with middle mouse button click. The solution is to set top bounds for left and right buttons to zero.
BUG (With the latest UltraNav drivers from support page)
When the middle trackpoint button (used for scrolling) is enabled, it is always enabled, no matter if you are using trackpont or touchpad. Left and right trackpoint buttons are properly disabled when you don't need them.
Even if you disable trackpoint completely without disabling that middle button first, it will remain enabled and will do nothing. (Blocking single- and multi-finger presses that touch it.)
I could not find a way to fix that problem with regedit.

Any problem can get official response and follow-up through a SR on Metalink/MOS (if you have a DB support contract), else you can post here and hope someone from development picks it up.
Regards,
K.

Bug Report - Some items in your iTunes Library ... because the file could not be found.

10.6 and this is still this is a problem?!?!?!?!
Not like this is an obscure issue only affecting a few noobs. Google returns 11,200 results on this issue!t'
Can we PLEASE at least allow the list of broken files to be dumped as a text file so I can find them manually! guess not,
I'll just have to get out a pencil and write down 100 songs to spend my saturday looking up and fixing. Or I could let my wife purchase 100 songs she already has whenever this comes up...
What's really infurating is that non-technical wife thinks this means she must go to the iTunes store and buy them again. Is it just coincidence that this only happens to songs that we ripped from the CD with iTunes? Hmmmm?....
what follows is for the programmers, please make sure this get's to the development group.
iTunes is the only music library manager, Media player was not even activated.
iTunes is configured to "Keep folder organized", "Copy files to folder when adding"
this has been a recurring issue since iTunes 9.x for us
The issue is persisted accross system and library rebuilds.
some of the same songs recurr but most of the time the list differs.
Library survived transfer to new computer and back for a system rebuild (new hdd) w/o this issue.
I'm guessing 100 songs is an arbitrary limit for error reporting.
Songs seem to get lost for the following reasons.
Track number added to filename
Spelling of some tags like Album, Artist, Title differ in iTunes library and the file path !!!!
Only seems to happen to mp3 files.
My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Would love a bug number and feedback chanel on this.

The missing file thing happens when files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files in a relatively sensible structure, then you should be able to use my FindTracks script to reconnect them to iTunes .
Although you say you haven't used Media Player it can be raised as a background process by visiting enabled web sites. Possibly worth you reviewing this post: Getting iTunes & Windows Media Player to play nicely
jerunamuck wrote:
...My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Unlike Windows Media player iTunes doesn't have a feature to automatically update tag data, although it will sometimes spot when a 3rd party program has (say during playback) and then update its own copy of the data. The iTunes (Music) Library xml file is provided for querying by third party software and is rewritten every time there is a change to the library, but is otherwise of no relevance to iTunes. The library is maintained in the iTunes Library.itl file. I suppose what could be happening is that iTunes issues a command to the file system to move a file based upon its tag, updates its knowledge of where the file is supposed to be, but the OS fails to move the file for some reason. Alternatively everything could go as planned, but iTunes could fail to get the updated copy of the library written out to disk so next time you start you get the previously stored locations.
I have ideas of my own about the best way to organise my media, but I'm quite familiar with the way iTunes does it. It might be interesting to see the details of one of the broken tracks, the path iTunes thinks it is at, and the actual path, in case there is anything that can be deduced.
Apple don't run an open bug tracking system so you won't be able to follow reports/progress based on a bug number. You can drop a line to iTunes Feedback or get a free Apple Developer account and submit a bug report report there.
tt2

Oracle 8i bug report

Dear OTN people,
when playing around with Oracle 8i EE for Linux I have found
several problems:
The following bugs/problems I have encountered are:
I have already applied sucessfully the patch to 8.1.5.0.1
1. $ORACLE_HOME/bin/osfind is a SPARC executable
2. $ORACLE_HOME/bin/osagent is a SPARC executable
3. $ORACLE_HOME/bin/locserv is a SPARC executable
4. $ORACLE_HOME/bin/vbj references "whence" which is not
available on Linux
5. alert files always contain: "Load indicator not supported by
OS!"
6. when trying ejb samples you cannot use jdk 1.1.7 or above
since oracle jvm seems to test for the version number: this
should
at least be documented. Better would be to remove this check.
Java is Java, and a jdk 1.1.6 and 1.1.7 should be compatible in
terms of functionality. I know this is not reality...
7. the THREADS option for all java tools should be configurable
centrally, and it should not only be green and native
but also be "empty", so one can use IBM jdk1.1.6 which is VERY
good. It simply does not accept -native or -green since it
is a real native implementation. I will send a request to IBM for
adding dummy options as well...
8. It is annoying that some java tools require JRE wheras some
require JDK (rt.jar vs. classes.zip). Could you unify this?
9. Please do not hardcode the jre/jdk directories. Many
distributions do not have java in /usr/local. Make it
installation configurable. It could even be detected
automatically via "which jre" ;-)
10. /javavm/demo/examples/ejb/applets/EJBClubMed example give
this error:
clubMedClient/ClubMedClient.java:18: Class
netscape.security.PrivilegeManager not found in import.
import netscape.security.PrivilegeManager;
Having those problems I am not able to test the corba stuff
supplied in the javavm/demo directory.
I really appreciate very much Oracle's commitment to Linux, so
please go ahead and fix those problems to make all your users
happy ;-)
Greetings
Marcus
null

Single quotes must be doubled in SQL statements to be legal. I've filed Bug# 3574900 for us to do a better job on fixing up this case in the future, but there's an easy workaround idea for now.
If you don't want the user to have to know/remember this, you could override the getViewCriteriaClause() method in your ViewObjectImpl class, and "fix up" the view criteria attributes to double-up occurrences of single apostrophe's before returning super.getViewCriteriaClause().
Here's a quick web log entry on it with some sample code:
http://radio.weblogs.com/0118231/2004/04/16.html#a276

Bug report - classic report lov defn retained when no longer relevant

Hi,
In January I spotted a case where, attributes were retained after a selection was changed, and related fields are hidden in the dev environment.
http://www.grassroots-oracle.com/2013/01/dynamic-action-hidden-false-actions.html
Anthony Rayner asked me on twitter for other examples and I just found one.
Classic report - column display as "Select list (query based lov)"
Add LOV sql.
Change back to "Standard report column" or "display as text...", save.
Change to "select list..." -> lov definition re-appears.
I actually founds this after setting the column to standard report column, then copying the page - the LOV was present in the new page!
Scott

Scott,
Thanks for following up on this. I have filed bug #16482841 for this, which will be looked in the next major release.
Thanks again.
Regards,
Anthony.

Bug report - Application Search

Apex 4.1
See http://screencast.com/t/wc8cyKKV5Pvh
Searching for a string like *1e6* in the Search box is interpreted as a number (in scientific notation) and it tries to pull up page no 1000000

Hi Scott,
thanks for reporting. I have filed bug# 16599622
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Bug report in small size website using servlet?

Can some one suggest me what is the best way to report bug in a website containing about 30-50 pages?
My bug report should use web based email service. It should have
- date of report
- email id
- report
and some kind of url or tag which should be automatically included in the email which will enable us to find out the particular page.
i was thing of making an UNIQUE bug report links in each web pages which upon clicking will through a particular url link to the servlet and the servlet will catch that and include in the email.
Is this possible? do you have better suggestion?
thank you.

The attached patch for db-4.7 makes two changes:
it allows enough for each bucket to have the configured number of threads, and
it initializes env->thr_nbuckets, which previously had not been initialized.
Please let us know how it works for you.
Regards,
Charles

NSCD Segfaults - Bug or incorrect configuration?

Hi, my NSCD is segfaulting a couple of times a day. The only record I have of it is:
LINODE2: 04-22-2010 09:35:01 [kernel] nscd[31604]: segfault at a ip b776bcdb sp ae91a9dc error 4 in libc-2.11.1.so[b76f8000+141000]
I don't know if it is possibly due to me configuring it incorrectly. Here is nscd.conf
### /etc/nscd.conf: Name Service Cache Daemon configuration file
logfile /var/log/nscd.log
debug-level 1
server-user nobody
paranoia no
threads 4
max-threads 32
enable-cache passwd yes
positive-time-to-live passwd 600
negative-time-to-live passwd 20
suggested-size passwd 211
check-files passwd yes
persistent passwd yes
shared passwd yes
max-db-size passwd 33554432
auto-propagate passwd yes
enable-cache group yes
positive-time-to-live group 3600
negative-time-to-live group 60
suggested-size group 211
check-files group yes
persistent group yes
shared group yes
max-db-size group 33554432
auto-propagate group yes
enable-cache hosts yes
positive-time-to-live hosts 3600
negative-time-to-live hosts 20
suggested-size hosts 211
check-files hosts yes
persistent hosts yes
shared hosts yes
max-db-size hosts 33554432
enable-cache services yes
positive-time-to-live services 28800
negative-time-to-live services 20
suggested-size services 211
check-files services yes
persistent services yes
shared services yes
max-db-size services 33554432
Can someone take a look and tell me if I should file a bug report?

Allan wrote:
There is a bug report here: http://bugs.archlinux.org/task/19157 . So far I have not been able to figure out what is going on. Given you appear to be using Linode, I doubt this is a suspend-to-ram issue that the bug report suggests.
Edit: try
enable-cache hosts no
See http://patch-tracker.debian.org/patch/s … ching.diff
Thanks for the answer. It turns out though that the hosts cache is actually the only one that is important for me...

BUG REPORT: new 10g Driver throws SQLExcpetion

So far, i just replaced my old ORACLE JDBC driver jar file with a new version. Of course, i use the classes12.jar to be used by JDK 1.3. This worked for all the 9.xxx Drivers. Now, i tried to use the classes12.jar from the new "10g" Driver (10.1.0.2.0) but it doesn't work anymore. The first simple SELECT statement throws this error:
java.sql.SQLException: Typlänge größer als Höchstwert
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:161)
     at oracle.jdbc.driver.DatabaseError.check_error(DatabaseError.java:884)
     at oracle.jdbc.driver.T4CMAREngine.buffer2Value(T4CMAREngine.java:2230)
     at oracle.jdbc.driver.T4CMAREngine.unmarshalUB2(T4CMAREngine.java:1047)
     at oracle.jdbc.driver.T4CTTIdcb.receiveCommon(T4CTTIdcb.java:111)
     at oracle.jdbc.driver.T4CTTIdcb.receive(T4CTTIdcb.java:94)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:590)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:111)
     at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:350)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:895)
     at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:382)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:985)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
For the simple select statement:
select REF_CLASS, REF_CODE, REF_TEXT_DE from refset order by REF_CLASS,REF_CODE
so, nothing special. Going back to the last 9.x driver, it works again. Is the 10g driver knwon to be buggy?
Is there an official bug report web page on the ORACLE site (similar to the sun Java bug database)?

Hi all,
I am seeing following exception while using Oracle 10.2.0.3 base release with WebSphere 6.1.0.9.
------Start of DE processing------ = [2/3/08 12:59:14:698 CST] , key = java.sql.SQLException com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery 1315
Exception = java.sql.SQLException
Source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
probeid = 1315
Stack Dump = java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
     at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:801)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
     at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:841)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery(WSJdbcStatement.java:1381)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.executeQuery(WSJdbcStatement.java:754)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:418)
     at com.filenet.engine.context.ServerCallContext._getDBContext(ServerCallContext.java:611)
     at com.filenet.engine.context.ServerCallContext.getDBContextFromJNDIValues(ServerCallContext.java:783)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:380)
     at com.filenet.engine.gcd.GCDDBPersistence.<init>(GCDDBPersistence.java:135)
     at com.filenet.engine.gcd.GCDPersistence.getGCDPersistence(GCDPersistence.java:171)
     at com.filenet.engine.gcd.GCD.initialize(GCD.java:226)
     at com.filenet.engine.gcd.GCD.domainAvailable(GCD.java:183)
     at com.filenet.engine.gcd.GCD.isDomainAvailable(GCD.java:119)
     at com.filenet.engine.gcd.GCD.getContextInfo(GCD.java:142)
     at com.filenet.engine.init.StartupUtility.start(StartupUtility.java:136)
     at com.filenet.engine.init.StartupUtility.access$000(StartupUtility.java:39)
     at com.filenet.engine.init.StartupUtility$1.run(StartupUtility.java:68)
     at java.security.AccessController.doPrivileged(AccessController.java:274)
     at javax.security.auth.Subject.doAs(Subject.java:573)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:168)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:615)
     at com.filenet.apiimpl.util.J2EEUtilWS.doAs(J2EEUtilWS.java:207)
     at com.filenet.engine.context.CallState.doAsSystem(CallState.java:385)
     at com.filenet.engine.init.StartupUtility.startASSystem(StartupUtility.java:63)
     at com.filenet.engine.jca.impl.ConnectionFactoryImpl.start(ConnectionFactoryImpl.java:120)
     at engine.EngineInit._init(EngineInit.java:60)
     at engine.EngineInit.init(EngineInit.java:132)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:190)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:317)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1142)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:150)
     at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtensionProcessor.java:99)
     at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:787)
     at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:467)
     at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:304)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:285)
     at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:88)
     at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:655)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:608)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1312)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1129)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:814)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:965)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:2131)
     at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.java:341)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Dump of callerThis =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
==> Performing default dump from com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
This is a FFDC log generated for the Default Resource Adapter from source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
The exception caught = java.sql.SQLException: ORA-00942: table or view does not exist
SQL Error Code is 942 SQL State is = 42000
Operating System = Windows Server 2003 5.2 build 3790 Service Pack 2 x86
Classpath = C:\Program Files\IBM\WebSphere\AppServ\profiles\AppSrv02/properties;C:/Program Files/IBM/WebSphere/AppServ/properties;C:/Program Files/IBM/WebSphere/AppServ/lib/startup.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/bootstrap.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/j2ee.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/lmproxy.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/urlprotocols.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batchboot.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batch2.jar;C:/Program Files/IBM/WebSphere/AppServ/java/lib/tools.jar
Ext dirs = C:\Program Files\IBM\WebSphere\AppServ\java\jre\lib\ext
Other related data. If null, nothing was passed in =
null
The Objects' instance variables are printed below recursively 2 levels deep =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
+Data for directive [defaultadapter] obtained. =
==> Dump complete for com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
Any Ideas?
Thanks in advance.
Regards,
Rajan

Filing Bug Reports in Configurator

Similar Messages

Maybe you are looking for