Fill a closed path after shape tool not working?

I draw a shape with the paths option using the shape tool,
ive selected and highlighted a visible normal layer at full opacity in normal blend mode.
right click the path and choose fill path... I have a colour selected already,
nothing happens...?

Thanks Paulo, that was it, only the icon at bottom of paths palette works.
here`s my workflow and settings.
1. draw path.
(the subtract to path option only activated when I made this screen capture due to pressing ALT3 for my screencap shortcut).
2. right click choose"fill path.." this option doesn`t work on empty or transparent pixels.
2. continued, settings are correct, but no fill results.
3. Try a stroke first. right click fill stroke... that works.
4. seems if you fill with stroke first, then right click, and choose fill path... then the fill will work, but only where there are pre existing pixels.
5. the fill path option at bottom of path panel overcomes this problem. however it may be a bug with right clicking and filling the path on empty or transparent layer space.
I`m on CS5 anyone had same result on CS6 ?

Similar Messages

Illustrator shape tool not working properly.

Hello. I am not quite sure how to word this. Whenever I try to use the basic shapes took (ellipse, rectangle, etc), I end up with mutiple shapes. I am trying to draw a circle and instead of one circle, Illustrator creates several. Has anyone encountered this problem before? I need help ASAP.

ravenboo,
Your Tilde key ( ~ ) is stuck, or at least Illy thinks it is. Unless you have a non US keyboard, in which case it is another key. Here are a few known keys on different other keyboards:
UK: ' (just below the @, to the left of Enter, at least in CS6),
Icelandic and German: < (just to the right of Shift),
French (only Mac): £,
Norwegian and Danish: æ (just to the right of L)
If she is wrong and it is unstuck, you may try the list to convince her.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Marquee tool and shape tool not working properly

I have Photoshop CS five, and today while working in it, the behavior of all of my tools changed.
Tools are now defaulting to “select from center” mode, which normally requires holding down the option key.
As another clue, if I create a marquee selection, as soon as I release the mouse button the Marquis tool switches to “intersect with selection” mode.
I quit Photoshop and deleted all of my Adobe Photoshop preferences, however when I relaunched Photoshop the problem was still there.
I thought maybe my option key was stuck down, but when I tried typing in stickies, characters typed normally, so my option key is not stuck in the down position.
Any help would be greatly appreciated, thanks!

Thank you for your response.
I actually spent some time with Adobe tech support working on the problem. You are correct it was a bug; they had me update my Photoshop AND delete this file from my preferences folder: com.adobe.Photoshop.plist — those two things did the trick.
Thanks for the help!

Shape tools not working

Hello. Just got a new MacBook Pro (had it for a week) and fresh install of Photoshop CS5. For some reason, I cannot draw anything on the canvas. My mouse cursor has a little black rectangle to the right of it. It stays this way when I hover over any toolbar icon.
For example, I'll click on the ellipse tool and when I move my mouse to the canvas, the cursor does not change. When I try to drag a circle on the canvas, it just shows the default rectangle outline as if I wanted to select an object (hope that makes sense).
Please help. This is driving me crazy.

That may have worked for you, but it's likely you're seeing this issue and it may come back:
"Delete the Adobe Photoshop Settings file?" displays when opening Photoshop, tools and other functions behave strangely | Mac OS 10.6.5:
http://kb2.adobe.com/cps/881/cpsid_88159.html
Jesper's Explaination and utility to clear the problem:
http://forums.adobe.com/message/3296632#3296632
We're working with Apple on correcting the issue. Best bet is to use Jesper's utility until there's an update.

Shape Builder tool not working on shapes in a clipping mask

Hello again,
Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
Thank's for answering,
Lindberg

Hi,
Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
Thank’s again for answering,
Robert Marchand
[email protected] <mailto:[email protected]>
Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
Shape Builder tool not working on shapes in a clipping mask
created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

CS5 Refine Edges tool not working how its suppose to

Hello everyone - well I like the title says refine edges tool not working right -
I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
Thank you

Could you please post a screenshot with the pertinent Panels visible?
The videos you might have seen might simply be using images that lend themselves to the task better than your image.

Adobe XI - Hightlight text tool not working

Just downloaded adobe XI and the hightlight text tool not working. How can I get this to work.

I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Anlysis authorization implemented after Cascading is not working

Anysis authorization implemented after Cascading is not working.
Example: i have 3 dropdownboxes in WAD . Frist dropdownbox State, second dropdownbox District, third dropdownbox Town.In the first dropdown box i selected state AP ,it should show only districts in AP in the second dropdownbox.
But it is not showingin the second dropdownbox.
Please help me

Hi Priya,
The issue may be due to the SQL Reporting Services maximum number of parameter items. We can try to add following code to Web.config file to resolve the issue.
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000" />
<add key="aspnet:MaxJsonDeserializerMembers" value="30000" />
</appSettings>
(Note: We can according to our requirement to set these values. After that, restart all SQL Server services. )
By default, the Web.config file is located in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
More detail information, you can refer to the article about SQL Reporting Services maximum number of parameter items.
http://sqlsrv4living.blogspot.in/2012/10/sql-reporting-services-maximum-number.html
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Visual admin tool not working

hii guys,
in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

Hi,
Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
If this is not the case, then check the log files in visual admin directory. Please post the same.
Cheers...,
Raghu

Fill a closed path after shape tool not working?

Similar Messages

Maybe you are looking for