Fill aggregrates after transport

I have transported an aggregate from DEV to QA. I saw that the aggregate in QA has status of active but not filled.
When I tried to press the button "active and fill", it prompts me for request.
Is there any way to fill in aggregate after transport? Thanks.

Hi
It prompts for request because your quality system is open ( SCC4). Ask Basis to change the settings there.
You would always rebuild aggregate in target system after transporting cube.
Can you just try to capture in a request and fill the aggregates?
Regards
Anindya

Similar Messages

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

View modification in ODS after transport to production

Hi,
It's possible to see all modification in ODS after transport?
I would like to see the modification that was done in Navigation Attributes of ODS.
Thank's
Cesar G. Batista

HI
When you double click on ODS you see a info button(i) click on it it will pop up save and activate button these yo can see the last log.
Hope this helps!!
Thanks
Santosh RC

Issue with migrated transformation rule after transport

Hello all,
We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
Has anybody faced such issue? We are on Ehp1 SP7.
- Danny

Thanks Murali,
Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
- Danny

Error after transport of Virtual Cube with Services

Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
Noor

Hi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G.

Hierarchy Analysis Authorization does not work after transport

Hi Gurus,
I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
Regards,
Salman

Salman,
What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
Regards,
Shivraj Singh

Planning layout can no longer be displayed after transport

Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMa

Switch cube Load <> Planning solves the problem...
Thanks !
RaMa

In which situation I need to active objects after transport

Hi Experts,
I'm wondering in which situation I need to active object after transport? In some cases, I have to active transformation, DTP, infoobject, multiprovider.... Does any one make a conclusion of that?
thanks in advance.
Eric

Sometimes, because of impact of a transport some other objects will be deactivated, then we need to manuaaly activate the objects after transport.
Also, sometimes transport after import process could not be able to activate the objects, then also we have to activate them manually.
Or suppose, you have moved and infoobject, due to which some other objects become inactive (where ever infoobjects is being used), then we have to activate them manually, if you dont want to transport them.

Web template with HTML framset not working after transport

Hi,
I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
When looking in transport connection I see the following message:
"Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
Has anybody an idea what could cause this?
Is there a way to regenerate templates (like RSRT for queries) ?
Thanks in advance
Bernd Dümmel
KODAK Stuttgart
using ve created a

Did you upload the video?
Did you provide the correct path to your HTML object?

After transporting the TTF is not been used

Hi all,
I have installed a true type font (se73). After the installation I use it on a smart form style and it is shown ok.
The problem is that after transporting it to integration, the forms are not using the one I installed but a standard instead.
Hints: - all was on the same transport order and it has been transported ok.
- everything is active
- I have allready read the note 421518 and i have executed the report RSTXDELL

Are you checking by print preview only, or by printing?
Which device type is defined for your printer? (SPAD transaction, display the output device)
If the device type is a custom one (Y* or Z*), could you tell us what sapscript (OTF) driver it uses? (SPAD, double-click the device type).
The font conversion algorithm is based on the fonts allowed for each device type (they are called "printer fonts", and are maintained via SE73 transaction). You may verify which font conversion is done via SE73 transaction, choose "printer fonts", double-click the device type, and click the "font conversion" button.
To make sure, you may also see the converted font after the spool has been generated (the font conversion is applied before the spool is generated): display the spool in raw or hexadecimal view in SP01 transaction, the font lines are starting with FT characters followed by the converted printer font name.
Could you tell us what are the results of the font conversion in SE73 for your device type?

After Transporting the request RFC Destination is empty in SWCV and BEA

Hi All,
we are using SAP NW Mobile 7.1 SP08
After transporting the SWCV & Backend adapter, in the transported system the RFC Destination is empty
Please help me to fix this issue.
Thanks and Regards,
Joseph Beevin.

Hi,
When an SWCV is trnasported to a another system,the backend destination will be empty in the target system.,We need to configure the bakcned destination in the target sytem through the DOE Adimin.
DOE_ADmin Portal -->Configuration --->Backend Configuration.
In the backend configuration,select the SWCV for which the destination needs to be configured.Select the parameter "RFC DESTINATION FOR BACKEND"
When the SWCV is selected all the active Data Objects will be listed in the table below
Insert the above parameter to the parameter list(the table below)
Give the name of the availlable backemnd destination name in the "text value" column of the table for each data object and save it.
Now the backend destination is configured correctly in the target system.Please try this..
Regards,
Muralikrishna T.

Alert rules not displaying correctly in the RWB after transporting to QA

Hi Experts,
After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
Thanks and regards
Brendon

Having the same problem and looking for fix...

Changes in WAD are not reflecting after transport

Moving thread to Business explorer
Thank you
Edited by: YJV on Dec 22, 2009 2:09 PM

I just remembered a similar problem we had with reports. Changes weren't visible after transport, however, when we opened the report and saved it in the report designer, the changes were visible. It had something to do with authorisations, most users missed the authorisation to 'generate' the report which was needed after transport. Maybe you can try opening the template with a SAP_ALL user or something on production to see if it's related (or test again on QAS with a new template and a user with limited authorisations.
Kind regards,
Alex

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

Pricing Routine is not getting called after transport to quality

Hello,
We have created a new routine under Condition base value formulas. We have done all the required settings so that it is called while creating / changing sales order. Our routine is working fine in Development server but after transporting it to quality it is not getting called. We can see the routine in VOFM but in debugging mode the system is not able to find the routine.
Can anybody please tell me what setting is missing in quality?
Thanks in Advance.
Priyanka.

HI,
Pls ececute this report RV80HGEN in SE38 tcode then only the routine will works for first time.
Regards,
kishore.

Fill aggregrates after transport

Similar Messages

Maybe you are looking for