FIll in, save and protect with password

ok, here it komes.
i design forms for my users. the form has a pickingslip layout.
my users fill in the form save and send to the customer. BUT
the form has to be protected from applying changes to filled in data.
i just made a test in livecycle. protected the form with a pass word.
then i have to open the pdf in adobe acrobat 8 to enable the save form feature. but then the form is not protected anymore. i also done reverse.
developed form in livecycle, edited the security in acrobat 8 then
enabled the reader extension. pdf remaines unprotected, i do not get
the promt to give in the password

11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge itquickly
The reason that Apple suggests you drain and recharge your battery once a month is not because it affects the life ofthe battery. What it actually does is calibrate the battery sensor, giving you a more accurate reading.
Other than that, you done an admirable job of summarizing the Knowledge Base article:
http://www.apple.com/batteries/ipad.html
Best of luck.

Similar Messages

HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

I backed up and encrypted with password but on restore the password does not work. Advice

After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
Any suggestions please

How do I save excel file with password for read only access ?

Hi
I am trying to save an excel file with a password to make it read only when opened
using OLE2 . I am having a problem with the parameter list. This is my code that does
work.
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'C:\Reports\Excel\File.xls');
ole2.add_arg(args, 0);
ole2.add_arg(args, 0);
ole2.add_arg(args, 'TEST');
ole2.add_arg(args, 0);
ole2.add_arg(args, 0);
ole2.add_arg(args, 1);
I also have the following code at the beginning of the program to suppress dialogs.
     OLE2.SET_PROPERTY(application,'DisplayAlerts', 'FALSE');
     ole2.set_property(application,'Visible', 'false');

Hope it help.
     -- Begin : Protect your worksheet
     args := OLE2.CREATE_ARGLIST;
     OLE2.ADD_ARG(args,yourpassword); -- choose your password
     OLE2.INVOKE(worksheet, 'Protect', args);
     OLE2.DESTROY_ARGLIST(args);
     -- End : Protect your worksheet
     -- Begin : Save and close worksheet
     OLE2.INVOKE(workbook, 'Save');
     OLE2.INVOKE(workbook, 'Close');
     -- END : Save and close worksheet

Crystal reports xi release 2 open file excel protect with password

I am trying to open a file excel 2003 of which I know the password with crystal reports xi but when I select ACCESS / EXCEL DAO
NAME DB PIPPO.XLS
TYPE OF DATABASE EXCEL 8
PROTECTED ACCESS
PASSWORD DATABASE FOR EXAMPLE PIPPO
AND THEN OK
I RECEIVE AN ERROR MESSAGE
DESPITE THE PASSWORD IS CORRECT
THE MESSAGE IS THE FOLLOWING
access not succeeded
you detail dao error tails 0xc59
source dao.workspace
impossible description to decipher the file
someone can help me
this both with windows it approves business
what with windows xp
it programs office installed 2007 files excel saved in compatible formality 97/2003
I thank in advance for the help

Possibly Not supported in the version of CR you are using.

ASA and RADIUS with Password expiry

We currently have a 3015 doing our VPNs. We are looking to move that to our 5520. RADIUS with password epiry is being used for authentication on the 3015 and we would like to continue to use it. Reading the docs for the ASA I have found conflicting answers as to wether or not the ASA supports this.
Please advise with ANY help.
-Doug

ASA does support this...it is no longer referred to as radius with expiry, it the command is now "password-management".
http://cisco.com/en/US/docs/security/asa/asa72/command/reference/p_72.html#wp1725278

SQL Developer and Access with password issue

I have Windows 7 64bits, Developer Version 2.1.1.64 and Access 2007.
Created a MDB file added 2 tables, enabled de system tables and set a password.
I try to configure connection but it gives a "Not Valid Password" error.
I use on username: Admin
And the password I'd set.
What could be the error?
I unset the password and it works fine.

The password I had set was Database password and not user login so maybe there's no hope on this one, for now...

How to save and work with a Word document stored in the Oracle 8i Database?

Hi,
If you have any experience with saving and working with a Word document (stored in 8i) from Forms 6.0, then please let me know how.
Thanks ...
Peter Nielsen

hi
i had worked storing word documents in oracle8i.tell me what exactly u want to know.
null

Before downloading the most recent version I used to be able to save and quit with 2 tabs open, now I cannot. It closes both tabs

Before downloading the most recent version, I used to be able to save and quit 2 tabs when closing. Now I cannot. Both tabs close

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

Hello I am having problems with password remembering on Firefox 6. new passwords will not save and some old passwords no longer show up. Can you help?

I am using mac 10.8 OSX.

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted. 
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies

Power Pivot enable Excel workbook protection with password?

Hi All
We have a power pivot deployment without SharePoint in excel 2013 professional plus. All woks fine until we use a password to protect excel workbook so unauthorised users cannot open it. After enabling password protection we cannot access the power pivot
data model under power pivot excel tab. It tries to upgrade the power pivot model(which is not logical because it didn't do it before and was working fine). thereafter upgrade fails.
Has anyone successfully password protected a power pivot excel 2013 workbook? Is there a workaround to enabling security without SharePoint/office 365 etc?
Thanks
Sonny

Hi Sonny,
PowerPivot does not support row security or dynamic security. Security for a workbook is just a binary choice – either a user can read a workbook or she can’t.
In this case, I would suggest you consider designing Tabular model which can be secured using row security and dynamic security is also supported. For more information, please see:
Comparing Tabular and Multidimensional Solutions (SSAS):
http://technet.microsoft.com/en-us/library/hh212940.aspx
Regards,
Elvis Long
TechNet Community Support

Save and Protect your iPad Device: How to Save and Prolong the battery life of your new ipad

Please, as you read add more answers to this on how to prolong and save your ipad battery life. Thank you
Saving the battery life of your iPad
1.Keep Your iDevice Out of the Sun
Whatever you do, don’t leave your iPhone or iPod sitting in a hot car—heat kills batteries faster than any other factor, and your device that used to keep a charge for hours will eventually barely hold a charge, and you’ll have to pay Apple to get it replaced. The same thing holds true for any really hot environment: try and store your device in a cool place.
Reduce the Screen Brightness
If you keep the screen at maximum brightness all the time, you’re wasting a lot of battery life—and the screens these days are so bright anyway that you don’t really need to, especially at night. Head into Settings -> Brightness & Wallpaper to adjust the default level of brightness, which you can probably keep as low as 30% most of the time.
2. Make Sure the Screen Locks Quickly
Even if you’ve adjusted the screen brightness, there’s still no substitute for having it turn off quickly when you’re not using it. Head into General -> Auto-Lock to set the screen lock to happen as quickly as your device will let you. This makes a big difference if you are always picking up your phone and putting it back into your pocket without turning the display off.
3. Use Airplane Mode When You Don’t Need Internet (iPad/iPhone)
If you’re busy spending the next 8 hours playing Angry Birds, there might not be a good reason to have internet access, so you can consider using Airplane Mode, which turns off both Wi-Fi and the regular wireless radio. Of course, this will prevent phone calls if you’re on an iPhone—but if you’re busy with Angry Birds you probably don’t want the interruption anyway.
4. The more important reason to use Airplane Mode is when you’re mobile in an area with a really spotty connection—because the iPhone or iPad will try to stay connected at all times, it’s going to be constantly searching for a connection, which can drain your battery. Head into Settings and flip the Airplane Mode switch right up at the top of the screen.
Use Wi-Fi Instead of 3G if Possible
According to Apple, the iPad will get 10 hours of battery life under regular use with Wi-Fi enabled, but will only get 9 hours using 3G—the iPhone gets 6 for 3G and 10 for Wi-Fi. Of course, if you’re heavily using the Wi-Fi, you’ll still be draining the battery—the point is under similar workloads, Wi-Fi is better than 3G for battery life.
You can enable Wi-Fi under Settings -> Wi-Fi, and then pick the network you’d like to connect to.
5. Reduce or Eliminate Mail & Calendar Checking
If you’ve got a bunch of email, calendar, or contact accounts configured, and they are all being checked and downloading email on a regular basis, you’ll be draining the battery an awful lot faster than you need to.
Head into Settings -> Mail, Contacts, Calendars -> Fetch New Data and change the setting to the least frequent check possible. If you don’t use it often, you can just turn Push off entirely and then manually check when you need to.
6. Reduce or Eliminate Push Notifications
Do you really need notifications from Twitter or whatever other apps you’re running? You can turn these off one-by-one, or turn off Push entirely by heading into Settings -> Notifications, and save a bit of extra battery life since your device won’t be pulling in data for those applications anymore.
7. Reduce or Eliminate System Sounds
This one is probably a little silly, but if you really don’t care for the system sounds you can save a small amount of battery life by removing the sounds. A very, very small amount, most likely. Head into Settings -> General -> Sounds to change them.
8. Disable Location Services
If you don’t really need the location services, you can disable them to save some battery life. Head into Settings -> General and flip the Location Services setting to off.
9. Disable Bluetooth If You Don’t Need It
If you don’t use a Bluetooth headset or keyboard, you should keep the Bluetooth radio disabled to save some extra battery life. Head into Settings -> General -> Bluetooth to flip it on or off.
10. Disable Vibrate Feature in Games
If you’ve got a game that uses the vibrate feature, you can turn that off to save some battery life. This mostly matters if the game heavily uses it, and you’ll need to change the setting for the game. As a side note, and it should go without saying, if you’re running really intensive video games, they will kill your battery very quickly.
11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge it quickly.
<Edited by Host>
Irem Bright writes and would love your own addition if you got other helpful tips.
Thank you all.

11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge itquickly
The reason that Apple suggests you drain and recharge your battery once a month is not because it affects the life ofthe battery. What it actually does is calibrate the battery sensor, giving you a more accurate reading.
Other than that, you done an admirable job of summarizing the Knowledge Base article:
http://www.apple.com/batteries/ipad.html
Best of luck.

Doc.saveAs() and filenames with commas

Using Acrobat 9, I have convinced myself that commas confuse the innards of the doc.saveAs() function. For example, from the console, the following throws an error:
this.saveAs("john, jimmy.pdf");
the error: "UnsupportedValueError: Value is unsupported. ===> Parameter cPath."
I am more than a little stunned. It's been more than 10 years since the major operating systems allowed commas in the path.
Am I overlooking something trivially obvious?

Thanks for that link to the "wish forum".
I have reported failure to accept commas in the path as a bug.
I'll keep this question open for just a little longer.
Does anybody know of any tricky escape character sequences that might solve the problem? I have failed with "\," and various ideas for nested quotes.

Fillable Forms: How to enable ppl to fill out/save/and email forms?

Hello. I'm trying to determine if it is possible to set a fillable form so ppl can save a form so they can email the file. Is that possible? If so, please share how to make the settings in the form.

If you mean that you want to allow users with Adobe Reader to save a filled-in form, then you can Reader-enable the form using Acrobat. How you do that depends on which version you have:
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features

Desktop software and problem with password

Hi
My apologizes for my english but it is not my language.
I have a blackberry curve 9300 since 2 years.
I used to work with the blackberry software for mac.
Since some weeks, I have trouble with this program.
The program invite me to enter my password. Normally, I write my password and it works. But, now, I have a second window which ask me a password too. But my password does not work. This window appear constantly and I can not work on my others programs. To use other program I have to disconnect my device and to force out the second program.
In attachment, you will see the window. (I can not insert an image)
How can I stop this program?
I already uninstalled the software but the problem remain.
Can you help me?????

Hi morbiteus,
Welcome to the BlackBerry Support Community.
So that I can assist you better, can you please provide the name of the second program you are referring to? Does it open each time you open the BlackBerry Desktop Software?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Save and open with applet?

Hi,
This is a quite urgent problem....
I have uploaded an applet onto my web page. It takes an image as input, embosses it and displays it.
At the moment the input is a text field that takes a url.
I want to create an upload or open file button as well, so that it is possible to input an image that is stored on the users computer. In addition I need a save function to save the altered image. Can I use the JFileChooser???
Is this possible using an applet, and if it is - where can I find some more information about this?
Thanks in advance!!!

Hi, as dgriffiths-leics-gov-uk said, you have to sign your applet, check the Jar files, and signing applets tutorials at java's site, or else the following URL:
[http://forum.java.sun.com/thread.jsp?forum=54&thread=383859]
...there was a posted message which I replied with all the process condensed to sign and add permissions to an applet, including the use and creation of the Jar file, its way to be signed; and, the HTML code you shall use. That way you can use
JFileChooser class and its methods in your class; therefore, the File Choosing dialog will be shown and you'll be able to Open and Save user files.

FIll in, save and protect with password

Similar Messages

Maybe you are looking for