Fill in the Blank Options

When editing a fill in the blank there is a pull down in the top left of the correct answers box when it is setup as a user enters the correct answer. When I change the selection and close  the box the pull down slections update for a reason I don't understand either. Lastly, when I have two blanks in the same question, the pull down will show the first correct answer form each blank.
What does all this mean?

Hello There,
If you have multiple blanks in a question, this pull down helps you to change the answer for other blanks as well by quickly changing the option. And yes, when we have multiple correct answers, the blank shows the first correct answer.
Hope this info helps.
Thanks,
Vish

Similar Messages

  • Have 2 or more fill in the blank on one slide

    How is it possible to have 2 or more fill in the blank options in Captivate 8?
    I have seen posts on here that link to now closed websites.  If anyone could give some advice I would appreciate it hugely.
    Thanks

    Thanks for that I'm very thankful.
    Do you know if its possible to create a GIFT file which allows an import of 2 FITB fields?

  • Fill in the Blank Problem

    Alright, I'm new to captivate and all that, but I have a slight problem with fill in the blank quizes that I can't seem to figure out. What I want to do is create fill in the blank quiz questions that already have an incorrect answer in the blank that, after a user attempts to answer the question, returns to the original incorrect answer. So, for instance, if I had a fill in the blank that read "(Cats) go woof woof" where the parentheses represent the blank, I would want 'Cats' to reappear after a user incorrectly filled in that blank. As it is, it seems to keep the user text. I've tried checking and unchecking the retain text button in options, but that doesn't seem to do it. Any help would be much appreciated.

    Re-reading the question, I realize I may not being clear? I want the example text in a text entry box to re-appear after a user types in an answer and is given the failure or success message. Not possible? Thanks in advance.

  • How do I create a "fill-in-the-blanks" worksheet?

    I am a teacher that works with students who have various needs - some of them have a difficult time writing with a pencil. There are tons of great teacher resources out there that I can print and use for students to write on. However online worksheets are another story. I came across the idea of using AdobeForms as an adaptation to writing.
    For example...
    Yesterday was _____________________. Tomorrow will be _________________.
    Or even:
    My n__me is _____________.
    Can anyone help me? Right now the only way I can do a fill in the blank is to have a field below a blurb of text, but I don't know how to do a field in between text.
    Help!

    If I were doing this I wouldn't use FormsCentral. I would create the layout in InDesign or a word processor and convert to PDF using Acrobat. I'd then add the form fields in Acrobat where the blank spaces are. You can limit the number of characters in a field and a lot more. Do you have Acrobat available to you? If not another option is to use the free OpenOffice /NeoOffice and create your layout and form fields and then export to PDF.

  • Using wild card with Captivate 5 ( fill in the blank)

    I am training software package that requires many fill in the blanks besides the login screeen.  If I were to recording the actions using Captivate 5 record, I think,  I can only use a demonstration recording as oppsed to having my students interact with the product by filling in the blank. For example, my product asks for a login. When I login to demonstrate how it should be done, the product reponds correctly.  By my student is limited to watching as opposed to interacting.  While login is not such a big deal, there are several other areas where the same concept applies.  Ideally, I wish to use wild cards in fill in the blank so that any name or information can be used to interact with Captivate and move the slide along.    Is this possible, and if so, how?

    I think Lilybiri may be misinterpreting your use of the term "wildcards" to mean using them in the programming sense.
    Perhaps you are referring to the characters that appear in a typical Password field to hide what the user is actually typing?
    If so, the text field object in Captivate has an option to use these password characters so that the user's typing characters are hidden.  The characters used are asterisks, which are what some people refer to as wildcard characters.

  • Changing font / appearance of Fill-in-the-blank questions

    1) I am using a Fill-in-the-blank question. I can change the
    font of the name and the description, but not of the Blank Answers
    themselves. I figure this should be possible, since these are
    basically text entry boxes (or drop down lists if you select the
    list option). Is there a way to do this? Perhaps an option I
    missed, or with a Javascript code that modifies some system
    variables, or some other way?
    2) Also, how can I get rid of the numbering in front of the
    Blank Answers that Captivate generates? Is there a way to do this
    (an option I missed, Javascript, or whatever)? I even tried to
    cover them up with a highlight box, but Captivate does not allow me
    to bring the highlight box in front in z-order.
    Surely, you wonder why would I want to do this, especially
    #2. One really useful example would be to embed the Blank Answers
    in the Phrase itself. Example:
    The <1> and the <2> are the two longest rivers on
    earth.
    1. __________
    2. __________
    By adding some blanks in the Phrase and moving around the
    Blank Answers, this could be turned into:
    The __________ and the __________ are the two longest rivers
    on earth.
    I would think that many would consider the second version
    more appealing.
    In addition, this would open other possible uses for
    Fill-in-the-blank questions. For example, consider a table or
    spreadsheet like setting where each Blank Answer is actually a
    cell. The user fills in the cells, and all entries are evaluated
    when the user submits.

    I guess the best response would be generate the
    Fill-In-The-Blank question as Captivate requires. After it creates
    the questions slide, double click on the text box you wish to edit.
    For example, when you publish your question "The <1>
    and the <2> are the two longest rivers on earth.", this will
    appear as a text box on the screen. Double click it to edit and
    change "<1>" and "<2>" to "___________".
    You should also be able to edit your answer boxes in this
    manner as well.
    HTH
    Jim

  • Fill In The Blank / Sequence Questions

    Is it possible to have a fill in the blank question in captivate (4 or 5) that is scored according to how many options the user got correct?
    For example:
    If you use 4 grams of 'b' you will need _____ grams of 'x', _____ grams of 'y' and ____ grams of 'z' to complete the forumula.
    In this example if they answered all 3 blanks correctly they would get 3 points, 2 correct answers would give them 2 points and so on.
    Also, is it possible to  score sequence questions according to how many items were correctly sequenced?

    Hello,
    For the moment partial scoring (as I'm calling it) is not possible in Captivate, at least not in the included Question slides. If you want that feature, and you are certainly not alone, please fill in a Feature Request to get this feature on the priority list of the Adobe team.
    If you do not mind the work, it is possible to create question slides yourself using the available objects, user variables and advanced actions. I wrote several articles and blogged about those workarounds, one of them is about creating question slides with possibility for partial scoring (it is not a FIB-question but the principles are the same):
    Question slide with partial score
    Lilybiri

  • Fill In The Blanks slide

    I have created some "Fill in the blanks" slides using the drop down menu option for the answers.
    It was working fine yesterday but now, the drop down menu does not appear to allow the user to select the answers.
    Any help please...really stuck and under pressure to publish.
    Noel
    England

    I downloaded and had a look: your question is set up as a Survey question, then you never have a validation, correct/incorrect answers. I changed it to Graded and do get the correct captions
    Lilybiri

  • How can I make a fill-in-the-blank question with partial score?

    I need to make an evaluation test with some questions. Some of them is a fill-in-the-blank question and it has to have partial score.
    I have:
    4 fields (text entry boxes) with: retain text, validate user input;
    also checked include in quiz, with points, add to total and report answers;
    an action that disables the 4 fields when the student is on review mode (otherwise it would be possible to change the answer after submitting the answers);
    Problems:
    I can't give feddback to the student: if i turn on success/failure captions the student will see them while answering, if i turn them off he wont know what's the right answer. I tried to use a shape to hide captions but the captions are always in front of the shape;
    When reviewing the test something happens and the second time we see the results slide it assumes that the fields in the FIB question are empty;
    Notes: it will be used in Moodle, as a scorm package
    What can I do?

    I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
    "if i turn on success/failure captions the student will see them while answering" - before submitting
    "if i turn them off he wont know what's the right answer" - after submitting
    My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

  • Fill-In-The-Blank drop down space issue

    Hi,
    I have Captivate 7 and am putting in a number of Fill-In-The-Blank quiz questions and using the drop down but when the user makes the selection, not all the words are shown, it cuts off the last few letters and in some cases where I have a one character you can't see any of the answer.
    Any ways around this? (Other than not using one character)

    Do you need scoring? There is a Scrolling Text interaction (more control, you can empty the variable and it will be displayed empty) but it is a non-interactive one, no score possible except by adding other interactive objects.
    Custom Short Answer Question - Captivate blog

  • Fill-In-The-Blank drop-down list in HTML5 output

    I'm working in Captivate 7 (WIN) and developing for both SWF and HTML5 output, viewing courses in IE9 for Windows and Safari on iPad.
    I have a quiz containing a fill-in-the-blank question, using a drop-down list to select the correct answer, however it does not display the drop-down button or function correctly in HTML5 output (see screenshot).
    The issue began after updating to Captivate 7 version 7.0.1.237. The drop-down list worked prior to the update I installed recently. I'm viewing the published course locally and in the LMS, and it does not work in either.
    I've not read in the help documents that drop-down list questions are an unsupported question type in HTML5, and so I'm wondering if this is a bug that needs to be reported. Has anyone encountered this issue?

    Do you need scoring? There is a Scrolling Text interaction (more control, you can empty the variable and it will be displayed empty) but it is a non-interactive one, no score possible except by adding other interactive objects.
    Custom Short Answer Question - Captivate blog

  • Please help me fill in the blank

    Our own �innovative� Chunk Sort algorithm is designed for sorting arrays that consist of a few presorted chunks. The idea is to find the next chunk and merge it with the already sorted beginning segment of the array. We will implement this algorithm iteratively, without recursion.
         Fill in the blanks in the following merge method:
    * Precondition: 0 <= m <= n
    * m == 0 or a[0] <= ... <= a[m-1]
    * n == m or a[m] <= ... <= a[n-1]
    * Postcondition: the values a[0] .. a[n-1] are arranged
    * in the ascending order
    private static void merge(int a[], int m, int n)
    // If any of the two segments is empty, do nothing:
    int i = 0, j = m; // starting indices into the two segments
    // Allocate a temporary array temp to hold n elements
    int k = 0; // starting index into the temporary array
    while (i < m && j < n)
    if ( ______________________ )
    else
    k++;
    // Copy remaining elements:
    while (i < m)
    k++;
    while (j < n)
    k++;
    // Copy temp back to a:
    for ( _____________________________________ )

    Your teacher needs to teach you to Teach
    Yourself[b]. People can't always tell you the answer
    to everything. There comes a time in life when you
    just have to break down and fire up that brain cell.
    Not quite, you need at least two neurones to make a synapse. Unless, we talking about extrapyramidal pathways. Then termination on peripheral skeletal muscle is what is going on. Certainly, that is required in this case as the OP doesn't appear motivated enough to pick up a book.

  • Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)

    Hi Everyone!
    I'm having trouble editing a fill in the blank question that was upgraded from CP4 to CP5.
    The problems is I cannot see where the blank is.  Not the blank in my sentence, I have that, but the entry box. When running the course the blanks are at the TOP LEFT corner fo the slide.
    but when creating the course I can't see where the blanks are, to move them.....
    So to Troubleshoot, I thought I'd re-construct the answers, I clicked the sentence, and clicked unmark ... but it does not unmark....
    <EDIT> Okay I got it to unmark, sorta, but not really. Now I have three answer boxes on the test in run mode, but cant see ANY in CP5 when building it. </EDIT>
    Hmmmmm
    Anyone got ideas?
    (re-constructing the question on a new slide is not desired, I have hundres of questions, considering my 30 courses.
    Thank you!
    Greg

    Hello,
    Sorry, but I do not understand your question quite well, it is an editing issue when upgrading. Perhaps it would help if you posted some screenshots?
    And to be sure: did you install the patch for CP5 released in December?
    Lilybiri

  • Issue with fill in the blank field and back button.

    I am working in CP4 AS2.  I have create a page of fill in the blank fields to simulate filling in a form.  On the next slide, I show the answers by extracting the variables into text boxes.  I have a back and a next button and instruct the user to review their answers and if incorrect, to select the back button in order to reenter the data.  I have the back button set to jump to the previous slide by number (i've tried previous, last slide, etc...)
    The flash movie freezes when I select the back button.  I think flash is having trouble going back to the fill in the blank fields from the displayed variables.  Any ideas? or work arounds for this.  The idea solution would take them back to the page with the data already in the fields so they could correct the errors only and then return to the review page.
    Thanks
    Scott

    Hi there
    Is scoring enabled on these? If so, perhaps your quiz settings are preventing backward movement.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Two fill-in-the-blank answers from same list.

    I have a quiz question that is fill in the blank, two separate blanks.  The list of answers is exactly the same.  How do I insure that the learner does not use the same answer for both blank.  Example:  List two drinks that taste good to drink: 1. _________  2. __________   and the list is "coke, pepsi, Dr. Pepper, Sprite".  How do I make sure the learner does not list coke twice?
    I have Captivate 6......thanks 

    I do not think this will be possible with the default FIB slide. I would create a custom question slide, using either TEB's or TextArea widget for the 'blanks'. Then you'll be able to check the content of each of the variables that are associated with them, using an advanced conditional action.
    Lilybiri

Maybe you are looking for