Fill in the data in BW from RP

We fill in the data in BW from RP, all movements which not standard which begin on Z, don't appear there. In what there can be a problem?

Hi,
Do init without data transfer in BW under your Infopackage.
After this, run the delta load.
Regards,
Suman

Similar Messages

  • How the data extraction happens from HR datasources from R/3 to BW system.

    Hello All
    How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
    Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
    Searched forum but couldnt able to find the relevant one.
    Thankyou
    Shankar

    Hi Shankar.
    HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
    Follow this link for details on customization and dependencies for all CATS datasources.
    http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
    Regards,
    Swati

  • I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    Following up on this thread,
    I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
    I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
    Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
    I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
    Question:
    Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

  • How to extract  the date n time from images

    can anybody help me...what function/ method that i can use to extract the date an time from images
    thanks

    Hi norazanita,
    Please give clear idea what you want so one can proceed.
    And if i am not wrong and get you correctly than i think you need to read about OCR for JAVA.
    Regards,
    Joshi Shirin.

  • How the data is fetched from the cube for reporting - with and without BIA

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
    Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
    Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
    Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi,
    yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
    What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
    Regards,
    Jens

  • How the data is fetched from the cube for reporting

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1:  I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
    Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
    Cube B     *****                     E   *****                      42.002653  *****                  1,669,126            *****                    6
    Cube B     *****                     F  *****                     98.696442    *****                  2,426,006       *****                    6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi Jay,
    Thanks for sharing your analysis.
    The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
    In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
    Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
    Thanks,
    Krishnan

  • Where Can I settle an enhancement to delete a sales order item according to the data in BDOC from CRM?

    Hi expert,
    I have an urgent requirement from the client.
    Delete the sales order item totally in ECC.
    I planned to implement this enhancement in ECC. Check the data in BDOC from CRM middleware, according to the user status in the order item,decide whether the item can be deleted.
    My question is,where can I settle this enhancement? The BADI name,user exit?
    Thanks in advance.
    Jerry.

    Hi Jerry,
    It may be delayed. you may found the solution.
    Use BADI CRM_DATAEXCHG_BADI and try the code in MBDOC_FILL or BAPI_FILL method.
    Regards,
    Bala

  • Is there a way to remove the date and time from pictures?

    Is there a way to remove the date and time from phoos in iPhoto?

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

  • How the data gets replicated from CRM to ISU

    Hello All,
    How the data gets replicated from CRM to ISU?
    Would appreciate documents send to [email protected]
    Regards,
    Remi

    Here is the link!
    http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
    Cheer,
    Daniel
    http://sapro.blogspot.com

  • Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

    Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
    (ON the Phone)  Sticky note like program WM5
    I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
    I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
    I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
    Thanks.

    Hi,
    I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
    Regards,
    Zoltán
    http://www.clamagent.org - Free Antivirus for Exchange
    http://www.it-pro.hu
    http://emaildetektiv.hu

  • Ü Character being replaced ? when writing the data to CSV from DB in Linux

    Hi All,
    Can anyone help me in understanding the exact cause of my issue
    Issue Description: Ü Character being replaced ? or when writing the data to CSV from DB in Linux.
    Shell used: ksh
    Actual string: MÜNCHENER RÜCKVERSICHERUNGS-GESELLSCHAFT AG
    Output String: M?NCHENER R?CKVERSICHERUNGS-GESELLSCHAFT AG
    locale ouput:
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    Environment variable set: NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    Linux Version: 2.6.18-128.el5 128 bit
    java Version: 1.6
    Oracle DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    When i query directly from DB i get the data in right format but when i write the same data to a csv file then the above problem occurs.
    Can anyone please suggest me what could be the cause for this issue?
    Regards,
    Shiva

    Hi Srini,
    We are using Java based ETL specifically written for our application. we are using sqlplus to make DB connections. am using vi editor to see the data. After the Extraction process the data processed in also in the wrong format.
    Regards,
    Shiva

  • Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days.  Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari,

    Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days.  Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari, I get perpetual spinning after I fill in and click. Help! Thanks.

    Call the store in question:
    http://www.apple.com/retail/
    Extension 5 in the stores in my area has usually led me to getting ahold of a real person.  It may differ by store.

  • I want to fill the data source 0CO_OM_WBS_3 from COSP table.

    Hi,
    I am working on Plan and actual for cost controlling, I need to fill the data source with data from COSP table.
    Please give me the steps for this. I checked in RSA3 for data source it don't have any data, but the corresponding table COSP having data.a
    Thanks
    Durg

    Hi,
    See the following DataSources for requirements,
    0CO_OM_WBS_1                      WBS elements: Costs
    0CO_OM_WBS_2                      WBS elements: Budget
    0CO_OM_WBS_3                      WBS elements: Overall plan
    0CO_OM_WBS_4                      WBS elements: Statistical key figures
    0CO_OM_WBS_5                      WBS Elements: Selections
    0CO_OM_WBS_6                      WBS Elements: Actual Costs Using Delta Extraction
    0CO_OM_WBS_7                      WBS Elements: Commitment Line Items
    0CO_OM_WBS_8                      WBS Elements: Budget Line Items
    Use 0CO_OM_WBS_6 for Actual , bcoz it is having Delta Option for Plan you can go 0CO_OM_WBS_2 or 0CO_OM_WBS_3. See the SAP Help on that.
    http://help.sap.com/saphelp_nw04/helpdata/EN/08/47c6f8bc1db04a84c9185954208ee7/frameset.htm
    In this help you can find complete details of the Tables, you can see help for all above DataSources.
    Thanks
    Reddy

  • How to find where the data is coming from in appended field for BW extract

    I am not an ABAP'er ... And this problem is about a BW Extractor
    I am extracting data for my (Utility Industry) Sales Statistics Cube using 0UC_SALES_STATS_01 data source. The Extract structure is BIW_ISU_ESTA and we are appending the structure with a few fields:
    I_ZAHL1
    I_ZAHL2
    I_ZAHL3
    I see some similar fields in DBERCHZ1 which are not the same. The data gets filled in the above fields somehow. I need to find out how and where. We have now diffrent variation of the same data and I'd like to extract that transactional data as well using the same fields rather than appending more fields to an already huge extract structure. When I click on the fields in BIW_ISU_ESTA, it takes me no where. I also tried out the extractor program (RSA3) in debug mode but somehow the fields are already populated. I tried using the ABAP dictinary but can't find a way to find these fields there.
    Any help would be appreciated.
    Thanks a lot.
    Bilal

    Thanks Renata,
    This is a standard business content extractor with the fields enhanced. Usually we have some user exits to populate the fields but in this case we only append the extract table. I couldn't see these fields being part of any existing includes in the extract struct but some how they get populated. I guess system knows from where to copy the data.
    Thanks for your reply though. I am closing this thread as it seems not a very popular cube.
    Bilal

  • I am not getting the data in Bex from the cube

    Hi Experts,
    i am not getting the data from the cube to Bex,
    cube having the data, but i am not able to see this data in the Bex result area.
    Can  any one help me.
    Best regards,
    Bhaskar

    Hi
    In the manage cube, is reporting symbol is there for your requests
    If you have any red requests delete them and refresh
    If all requests having reporting symbols you may check the BEx without any filters or selection criterions
    Regards
    N Ganesh

Maybe you are looking for

  • A Problem With Recovery

    Hi I Use Oracle8i Under Windows NT, I login to the Oracle Management Server and create a full backup in NoArchiveLog mode. When I want to recover last backup, DBA Studio throw an error with message: "The database must be MOUNTED to to perform a recov

  • Dynamic Host Name -- Roadrunner

    I have a linux box that I would like to install Oracle 8i on for development purposes. I use this PC from home connecting to the internet using Roadrunner. The problem comes in that Roadrunner assigns me a dynamic server name/address each time I log

  • Issue with conition type

    hi, i am facing an issue with a condition type for custom charge in PO. when i create PO , i manually  add gross price and  custom conditions  in PO . then i do GR for this PO but now i have to change custom charge in PO, so i reverse GR . but now i

  • Re-linking

    Re-linkin folios 1. A way to relink folio files when the server cannot find the folio on you local drive but it's available in the cloud. 2. A way to duplicate all folio contents Including meta data and folio specs. 3. A way to link or unlink to sing

  • Working Time sub area not visiable Ess

    We are using the ESS portal (versions ERP 2005 along with ECC6) for Recording Working Time by our employees. After loading Enhancement Pack 3 (EP3) the Working Time subarea has disappeared from the Working Time area and we canu2019t figure out why.