Fill Opacity slider not staying set

When adjusting the Fill Opacity slider, after unclicking the mouse button (or trackpad) the slider still moves with the mouse, I have to click (hold)-drag-release-click to get it to stay where I need it to in stead of just click (hold)-drag-release like usual sliders.
Muse v.1.1
OS X 10.7.4

Sounds like you want to customize how your control looks. You can change the appearance of any part of a control here is an example.
Jeff
Attachments:
slider2-1.vi ‏11 KB

Similar Messages

Camera Raw 4.0 Fill Light Slider Not Working

Hi,
Just installed Photoshop CS3, and I'm having an annoying problem.
When using Camera Raw 4.0, all the sliders work smootly except for the Filli Light slider. Its the only slider that is almost impossible to adjust via dragging the slider via my mouse. Of course, this is probably my most frequently used adjustment.
The Photoshop CS3 was a clean install, directly from the CD provided by Adobe.
There was never any Beta version installed.
Sure hope that you can help.
Thanks,
Ira

The Fill Light adjustment is the single most processor intensive of all the controls in Lightroom. When you first move the slider it causes Camera Raw to generate a large blur copy of the image and that takes a bit if time. During that initial bit if time, fill Light will NOT be as responsive as the other controls in Lightroom...it only takes a moment but if you are trying to make adjustments while CR is building the mask, you'll get jittery results. The key to using it is to move the adjustment off zero, pause a bit while the mask is being generated and then start fine tuning the adjustment. After that initial move off zero is done, it should be about as fast as most of the other controls-and no, you DON'T want CR to auto-generate the mask for every image by default, it would make Camera Raw much slower overall.

Cgi.auth_user not staying set

I had CF8 running on iis7 and this used to work fine. When a user logged into IIS7 with windows authentication, the cgi.auth_user variable would stay set the entire time they were in the particular folder that required authentication.
I just upgraded to CF10 and iis7.5 and now, when a user logs into a folder that requires windows authentication, the cgi.auth_user variable is set for just the page which required authentication, when they travel to the next page(s) via links, the cgi.auth_user variable is changed to NULL.
The entire folder is set to require windows authentication, but no cgi.auth_user value is set...
Can anybody help?

Hey there, we're running into the same thing.
When you mean Server level, are you talking about the IIS Site itself?
Sites->{site name}->Authentication->Windows Authentication = Enabled
We have that set, and it generally works... but then randomly doesn't and users have to reopen their browser.

Use iCloud will not stay set to on in pages on my iPad mini

I cannot get the iCloud setting for pages to stay set to 'on'. It keeps resetting itself to "off". I have verified the wi-if connection, the account settings, checked for updates, confirmed sufficient storage space, and everything else I could think of. I also checked the settings in safari on my MacBook Pro.
Has anyone else run into this? It is very frustrating.

Problem solved! See Re: "Use iCloud" Pages/Numbers option won't stay turned on

Print page option will not stay set

On this vi, go to vi Properties page for Printing.
The checkbox at the bottom is the one I want set. "Auto matically print front panel...."
I check the box. I save the vi. The box is no longer checked!!
Why?
I want to make this happen. I must make this happen.
This vi is not finished, but is good enough to demonstrate the issue.
Thanks.
Attachments:
Report Panel.vi ‏254 KB

Interesting. This behavior looks like a bug. It's still there in 8.0.1.
As an alternative, you can use the "Auto Logging->Print at Finish" property for the VI, like this:
(Obviously, you want to change the node to "write" and wire in a Boolean constant.)
Message Edited by smercurio_fc on 04-24-2006 01:06 PM
Attachments:
Untitled 1d.png ‏2 KB

When setting my home page, it does not stay set?

Could not follow troubleshooting instructions without confusion. Simplification may help.

Is your home page set in the Firefox preferences/options General tab? Is the drop down menu set to Show my home page?

Audio Key frames not staying set

I have three pieces of Smartsound music in my video. I add keyframing (rubber banding) the audio to accomodate a voiceover. After I set the key frames ((about 20) I look back and they have all move positions. I've gone back a reset all the keyframes about three times and each time after I finish, the key frames are all in the wrong position. I have tried repairing permissions, as well as doing a "save as" in FCP...but the problem persists. Any suggestions?

Forgive me for saying it, but it sounds like possible user error ... certainly keyframes do not usually move all by themselves. But hard to guess exactly how or why these keyframes are moving.

My "Sort" settings do not stay set after I leave bookmarks.

When I go to bookmarks and then click on "Organize Bookmarks", I go to "Sort" and then select a particular setting like "Sort by Name." From the bookmark menu, I select a specific folder. Then I go to the left top middle icon with 4 horizontal lines, click on it and press "Sort by Name' and see all the folder name go into alphabetical order. However, when I close bookmarks it reverts to the "Unsorted" mode.

The Views menu in the Bookmarks Manager (Bookmarks > Organize Bookmarks) is for displaying the bookmarks in different sorting orders (hence the name Views) and doesn't sort bookmarks permanently.
Make sure that you choose "Views > Sort > Unsorted" in the Bookmarks Manager if you want to sort bookmarks via the right click context menu (Sort By Name).
The option to sort bookmarks is only available for folders and not for individual bookmarks.<br />
Right-click a folder to open the context menu and choose "Sort By Name" in the left pane of the Bookmarks Manager or in the side bar to sort the bookmarks alphabetically or drag bookmarks to the wanted position. If dragging doesn't work then use Cut and Paste instead.
See http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

VTP Mode not staying set?

I was configuring a C3560-48PS for deployment in my new job and I asked my boss if he wanted to review my config before I setup a swap time. He did and came back to me stating I needed to set the switch to be a VTP client on suchandsuch domain. Hmm.. I thought I did that. So I con'd the switch, conf t, vtp mode client, vtp domain ABC123, ctrl-z. did a status on vtp, in client mode. great! So did a copy ru star and reloaded. Switch came up, just for grins did a vtp status. It's back in server mode (the switch is not currently on the network). Hmm.. So I inquired to my boss, he was puzzled and suggested an IOS upgrade. I loaded up the 12.2(25)SEE version. reloaded. attempt to set vtp to client again, saved, reloaded. and it's STILL saying it's in server mode. What the heck? This should be a fairly simple process. Any idea?

Hello,
The default is VTP Server with a NULL domain. VLAN and VTP data is stored within the flash:vlan.dat file. If you change the VTP mode to client first, client's can't change VTP attributes per se. If you don't have a vlan.dat file in flash and you change vtp to client and then save - these changes will not be applied. However, while in default server mode, simply set the domain name, then save the config, verify you have a vlan.dat file - then you can make any changes you like (see attachment).
Hope this helps.
Regards,
James

Safari 4.1.3 cookies not staying set when safari is quit

Hi,
This post is a solution I couldn't find out there.
Problem: out of the blue, when i opened Safari 4.1.3 on Mac OS Tiger, I get the login EVERY time for email, forums, etc. even though I used to be able to check the "remember my account" button and not have log in every-time I started Safari. I have cookies set to "always accept" and "private browsing" turned off. But its like the cookies aren't being saved anymore for my safari session, and upon restarting Safari the next day, i was having to login to the websites every session.
Solution:
Look for your cookies.plist file. Mine lost the ability for my account to read/write to it. So I had to delete /Users/<myaccount>/Library/Cookies/Cookies.plist (when Safari was not running). Restart Safari, it will recreate this file as a blank file. Permissions should now allow you to read/write the file.
This fixed my issue of having to login EVERY time I started Safari.
Hope this is helpful to someone our there!

Hi,
From your Safari menu bar click Safari / Preferences then select the Autofill tab. Make sure: *User names and passwords* is selected.
Your passwords are stored in Keychain Access (Applications/Utilities). If you have problems logging in to a site, quit Safari. Launch Keychain Access. Select Passwords on the left. Delete the keychain for that site.
Relaunch Safari. Login to a site with your login data. When you see the dialog asking if you want to save that info to a keychain, click Yes.
If you still have problems, open a Finder window. Select your Home folder in the Sidebar on the left. Now open the Library folder then the Preferences folder.
Move the com.apple.keychainaccess.plist file to the Trash.
Restart your Mac.
See if that helps..
Carolyn
Message was edited by: Carolyn

General options not staying set

Attempted to modify these settings to solve another issue which is that FF 11.0 now updates itself every single time I open FF. It goes through the add-on check then displays the same "Welcome to FF" tab every single time I start FF.
So, in an attempt to solve this, I changed the general settings to "Show Home Page" and clicked OK, quit and restarted FF only to be presented with the same exact issue. Checking the general options revealed that it changed itself back to "show tabs from last time".
So, I have two problems. The incessant updating and displaying of the welcome tab has happened before, with other versions.

Hello,
Thanks for the prompt reply. That is the first thing at which I looked. There was no problem there, the Mozilla page was not set. The next thing I tried was to reset all preferences, which did not work either. Curiously, when going to the User.js file through troubleshooting info, I saw that the file did not change after resetting it in safe mode. I then renamed it expecting FF to create a new one. That did not happen. My renamed file still exists and there is now no User.js file in my Profiles folder.

Screen Resolution Will Not Stay Set...

Hi Gang:
I am trying to get my Mac to display 640 by 480 60Hz resolution so that I can input it into my television. I change the settings in the System Preferences /Display to what I want, yet every time I reboot it changes back to a different setting. I have been setting it up on a computer display monitor, is accepts the new resolution, then reverts back as soon as the computer is restarted. I have tried changing the resolution and starting it on the television upon a fresh re-start thinking it may sense the computer monitor, but still goes back to the higher rez setting. Is there a way to force the setting on the computer? very frustrating.
Thank you, Glenn

Hi.
The screen resolution and refresh rate are stored in the PRAM. If it's an Intel Mac you're dealing with, reset the PRAM by holding the CommandOption+PR keys at startup, until you hear the second chime). If you have a PowerPC Mac, then you'd better reset the NVRAM, by booting into Open Firmware (hold CommandOption+OF at startup), and type at the Open Firmware prompt:
reset-nvram (hit Return)
set-defaults (hit Return)
reset-all (hit Return)
The machine will restart. Set the resolution you want, and see if that persists after restarts now.
Good Luck.

My Personal Settings will not stay set

Hi all -
Upon booting up one fine morning, I discovered all my personal settings had reverted to default - "blue" appearance, mouse tracking speed, touch-pad click settings, screensaver (not desktop pic or hotcorners, though). In addition, general work-flow from one window to next, or from text field to text-field is very choppy.
I have run Techtool, an anti-virus scan, repaired permissions. All my software is up to date.
Any ideas as to what is going on? Thanks in advance.
Message was edited by: orestesonice
Also, when I try to change all these settings in preferences, the changes last only as long as the preferences window is open. When I close it, all the settings revert back to "normal."

Hi, and welcome to the Forums!
See if this is what happened, whether it was the OS or you is academic.
Mac OS X 10.3, 10.4 or later: Return to default desktop, apparent "loss" of home directory...
http://docs.info.apple.com/article.html?artnum=107854
If you haven't lately, do these two steps in order.

Default Apps Settings Not Staying Set

I have noticed that my default application settings keep resetting themselves each time I reboot. My default browser, mail app, EVERYTHING... without fail. Does anyone have a clue as to what would cause this to happen?

Try resetting the Launch Services database.
It contains that info, and may be corrupt.
Open /Applications/Utilities/Terminal, copy the following text in, and press return.
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user
Good luck!

IChat Idle Setting Not staying Set

I am using iChat version 3.1.8 (in OS X v10.4.10). I don't want people to be able to see that I'm idle, and I've noticed that no matter how many times I check the box that says 'Block other people from seeing that I'm idle' in the Security tab of the iChat preferences, any time that I close and re-open iChat the box becomes unchecked so I have to check it again.
Any ideas on how to fix this? (I'm using AIM as well as Jabber).

Have a look at the sample app csharp_win_paramengine.zip here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
There are also a few other parameter apps at the above link that may be helpful
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Fill Opacity slider not staying set

Similar Messages

Maybe you are looking for