Fill setup tables appl 11, 12 & 13 in the same time ?

Hi
Whether there are some contraindications against simultaneous generating setuptables for application 11, 12 and 13?
I must fill at first one setup table
next second and next third
or may I generate all in the same time?
Regards
Adam

Hi,
I dont think it will be an issue. We have done a couple of times without much issue (not exactly for the same applns ).
Thanks,
JituK

Similar Messages

HT3291 Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

Welcome to the Apple community.
No, this doesn't work directly from the Apple TV. However if you play the radio station from your computer you can send it via airplay to both devices, thereby achieving what you require.

Is it possible to link up several macs, all with different login details, to an apple TV 2 all at the same time?

Is it possible to link up several macs, all with different login details, to an apple TV 2 all at the same time?

You can stream from multiple libraries but they must all be using the same home-sharing ID

Stream music from Apple TV and use Apple TV source output at the same time?

Hello, I'm using an Apple TV 3 and a wireless speaker Bowers & Wilkens Z2 . The Apple TV is connected to my Stereo equipment. I now want to use the B&W in parallel. So far I only could find to switch between Apple TV and the wireless speaker. I'd like to include and not toggle between the stereo and the wireless speaker.
Any support would be appreciated.

On Mac in Settings go to security - advanced and turn of IR on the Mac you don't want it to control.

Is it possible to setup 802.11 n and ac at the same time?

n for the iPhone 5S
ac for the late 2013 rMBP

The "new" AirPort Extreme delivers a signal that is compatible with "a", "b", "g", "n", and "ac" wireless, so "n" and "ac" are being delivered simultaneously at all times.
Devices will automatically connect to the best signal quality based on their capabilties and distance in relation to the AirPort Extreme.
So, when the MBP is close to the AirPort Extreme or it has line-of-sight with the AirPort Extreme, it should be receiving a high quality "ac" signal.
Same for "n" on the iPhone.

Fill setup table 2LIS_03_BX and 2LIS_03_BF at same time

Hi Guys,
Can someone tell me whether I can run background Job to fill setup table of 2LIS_03_BX and 2LIS_03_BF at the same time?
By the way, whether I can run background job by different sever using different filters(site range A, B, C) to filling setup table of 2LIS_03_BX?
Thanks.
Regards,
Rojay

Hi Rajesh,
All three data source have setup table concept.
LO extraction means you should fill the setup tables.
2LIS_03_BX (Stock Initialization for Inventory Management)
2LIS_03_BF (Goods Movements from Inventory Management)
2LIS_03_UM (Revaluations) - captures revaluation data.
please refer the below document for your reference.
SAP BW - Inventory data loading step by step(0IC_C03)
Inventory Data Loading (MM) to BW PRD system
Thanks,
Phani.

Tcode to fill setup tables for application 0CS( Customer Service)

Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...

Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points.

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
for instance Keynote?

Welcome to the Apple community.
The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

What do exactly mean by 'document is lost' while filling setup table

Hi ,
In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table. So my questions are as follows :
1)What exactly do u mean by 'Document is Lost'? (I mean the document entries,will always be there in application tables ).
2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table? (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
Please let me know your opinion on above questions
Regards
Mohit
Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

Hi Mohit,
1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
Hope it clears your doubts.
Thanks.

Order is locked by user while filling setup table

Hi Experts,
Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled.
It showed that " Order xxxxxx is locked by user".
Because we have DSO concept in our CUBE, we didn't lock users.
But then the basis checked the users and removed from the system.
But still after removing the users, when we do the setup filling it still gets cancelled showing the same error.
Please help on this. Now i am stuck in filling setup section.
Thanks,
Thilini

Hi,
Thanks. I followed your instructions and removed * , last two check boxes and selected sales org.
Now i am filling setup and its still running. I used a background job.
In sm37 it shows as "active"
But when I check in NPRT, It shows no logs were found.
I want to know that, is everything fine?
Setup table is filling right?
expects a reply please...
Thanks,
Thilini

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

While filling setup table

hi,
whilw iam filling setup table iam getting the error
<b>No extraction structure active or no BW</b>
in rsa5 and rsa6 i did the procedure
inlbwe that ds is active
i deleted the set uptable
after i fill the set up table
iam getting this error
iam experting a solutions from the experts
regards
kiran
plz response to my mail id [email protected]

Hi Kiran,
It is not possible to modify the extract structure if
1. Set up tables have been populated during preparation and contains data
2. outstanding items in the extraction que (LBWQ) pending updates
3. Unfinished delta load or items in delta que RSA7.
What update method are you using ? Serialised V3 or the latest methods like
Queued delta ? what version of PI are u using. As i assume u also have latest PI or PI > 2001.2.
When u run SM13, make sure you select * or client and * for user. Also, the
date selection - make sure u enter date like 01011990 to include any
document that was posted. You will find some outstanding update records.If u
find any, try deleting them or else force the update using the collective
run.
If you have modified and you get an error, you may have to set back the
changes and reactivate the extract structure first and then do a collective
run ( search for a program with R*02)- this program forces any outstanding
updates for the modules under '02'. This program probably is the same in the
'job control' but am not sure. It is safe to execute this report which will
clear any o/s updates.
Carry out the changes using the following steps.
0. Lock transactions to be sure no postings are going to take place while
you are about to make changes.
1.There is a report you can run to check whethere changes to the extract
structure is possbile without errors. Report name is RMCSBWCC. Enter all the
comm tables related to purchasing ilike header, item and SCL while
performing this check. You should get a green light for permitting changes
to extract structure.Deactivating the extract structure has no effect so it
can remain active.
2. Delete the set up table for 02.
3. Performa collective run to be sure all qued data is taken into delta que
(even if u have never initialised).
4. Delete if you find any in RSA7 for the datasources in question. you will
lose the data but can be reinitialised later.
5. Run RMCSBWCC again to check if it is ok for bring about changes to the
extract structure.
6. If OK, make the changes necessary and save, generate datasource,
replicate and perform set up table before init run from BW. make sure no
collective run is started before completion of init load if you are using
serialised update.
hope this helps
award points if useful.
regards
Archna.

Fill setup tables appl 11, 12 & 13 in the same time ?

Similar Messages

Maybe you are looking for