Fill structure changed

Ok, I came it this morning and noticed I couldn't get to my H: drive (user drive). This is normally located on the server under vol1\users\, and when I look at that directory now it has the same exact files as the sys volume. None of the folders that are normally there are showing up. I haven't changed anything and I have no clue what to do. I have did a nss pool repair and dsrepair and it did not fix anything. Any suggestions?

This is as viewed from the client? Viewing from, say, the server console or ConsoleOne shows the correct contents?
What client OS and Novell client versions are you using?

Similar Messages

Structure changes in the LBWE, where does the field pool come from MCVBUK

Example: Customising Cockpit, lbwe > 2lis_11_vascl > Maintain structure
In lbwe the field 'pool' for MCVBUK does not have all the fields that I can see if I look at Structure MCVBUK using se11 such as FKSTK, FKSAK.
What does this depend on ? Is it to do with the events ?
Yet OSS Notes say to choose the fields from lbwe:
structure changes in the LBWE SAP Note Number: 762951
Note 576886 - Change to user-defined fields not extracted

But enhancing extract structures, you don't get the delta capability on the sepcific field (if you need it) - and there is no simple solution to this.
I found these OSS notes:
Note 328255 - Not all fields provided in Customizing Cockpit
This behavior is wanted. As not all fields of the communication structures can be used in a practical way, some are hidden. Fields are hidden for the following reasons:
 o The field is not filled for this event.
 o The field is only used internally (for example the work center ID - instead, the respective work center name is available).
 o The field should not be used here for reasons of design. Principally, you should select key figures only from the most detailed communication structure (or from the one with the most detailed hierarchy) and only the characteristics from all communication structures.
Note 351214 - BW extraction SD: Restricted field selection
This note goes into more detail
By the way, thanks for the replies, but the question was 'why ?' and I the OSS notes replied to this.
The whole problem is to do with 'delta' enabling, and I've spent a day researching to find that there is no easy way to delta enable enhanced extract structure fields.

'Structure Changed' Error when running a query

Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
Dominic

Hi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks

MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Structural Changes in SAP Bundle Patches New!
As of June 2014, there is a change in the internal structure of the SAP Bundle Patches (SBPs) for Oracle. While this has many benefits, applying the new SBP for the first time requires special handling. For more information, see the hot news SAP Note 2011199.
When looking at note 2011199 I found due to the changed structure and to identify stand alone patches it is recommended to run the bpmig.sh script.
To avoid these problems or to detect them before actually installing this SBP, you must run the bundle patch migration script bpmig which is delivered with MOPatch 2.1.16 and later.
The script comes up with an error message:
Cannot determine SBP version from "SAP Bundle Patch 11.2.0.3.2 - 201205".
opatch / mopatch semselfs seems to function properly...
Any clues?

Hi,
Please check the following SAP Note 2032109 - Executing bpmig.sh shows "Cannot determine installed SBP"
Thanks.
http://service.sap.com/sap/support/notes/2032109

Roles for disabeling structure changes in excel

Hello togehter,
I have got a excel sheet which I can open by the "Analyzer-AddIn."
If the users have to change some data, there is an embedded save-button.
But if they use the normal excel save button, it could be that the excell will be destroyed.
And now my question,
is it possible to disable structure changes by clicking the normal save button in an excel sheet via (creating) SAP-Roles? Or is it only possible by chaning VB-Code?
Thanks in advance!
Greetings,
Peter

Hi Peter,
if you want to disable the standard "save" excel button you should use some custom VB code. Afterwards, you can include this VB code in your reports using the workbook functionality.
Regards,
Theodoros

Accommodate structure changes in Budget Application for each year

every year our cost center structure changes to accomplish that we are creating New Budget Application every year . Cost center structure is divided in to Area then region and then csc. These Regions never stays under same Area they change it every year
can anyone suggest out a way to do it in only one Budget Application instead of creating new Application every year ?
How can we Accommodate structure changes in Budget Application for each year?
thanks in advance for the suggestions

Assuming the cost centers stay the same, and only the hierarchy of the dimension changes, it's really quite simple.
Export the level 0 data, clear the database, update outline, import the level 0 export file, agg database. You should now have the new totals.
All of this can be done in place without the export/import of data as well, but it is a good practice to export/clear db/import the data for defrag purposes.
Some things to consider, if the organization will want to compare year over year company totals...
1. They need to create some governance around newly inactive cost centers, usually you create some sort of "Inactive" parent in the dimension and when they are no longer active they need to be reassigned to this "inactive" parent. This will ensure that at least the company total stays the same.
2. Following #1, they need to understand that the year over year totals will may only be accurate at Company total (including the Inactive rollup) and at cost center.
Robert

Structure Changes in Database make SDK program crash.

Hi, is there an event I can catch when the database gets a structure change? Say a new table or field added?. Becuase everytime this happens the program crashes.
Thanks.
Jose.

Sorry I didnt specify it was in DI
I testit it and added a field to a MarketingDocument and after that the program halted in this line of code:
SAPbobsCOM.StockTransfer _oTraspaso = (SAPbobsCOM.StockTransfer)Global.COMPANY.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oStockTransfer);
I dont understand the error, it says:
Exception from HRESULT: 0xFFFFFB9E
Thank you.

Error during transport-Structure change at field level (convert table /BIC)

Hi,
I am trying to transport from DEV to Test when I encountered this error.
The tables are both consistent when I checked with SE14.
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Activation Mode)
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZCRUSDI026)
Table /BIC/DZCRUSDI026 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/DZCRUSDI026 has not been activated
Error when activating InfoCube ZCRUSDI02
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZCRUSDI023)
Structure change at field level (convert table /BIC/FZCRUSDI02)
Table /BIC/DZCRUSDI023 could not be activated
Table /BIC/FZCRUSDI02 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/DZCRUSDI023 has not been activated
Error when resetting InfoCube ZCRUSDI02 to the active version
How do I resolve this
thanks

Hi,
There are no Inactive objects in the cube in DEV system. Also must of the changes I made in Test are already in the cube in TEST But the cube is not active.
SAP proposed that the cube be activated manually but is not a good procedure to activate in TEST system.
Error when resetting InfoCube ZCRUSDI02 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating InfoCube ZCRUSDI02. An active version already existed before the activation.
System Response
InfoCube ZCRUSDI02 could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of InfoCube ZCRUSDI02 can no longer be used. Remove the cause of the activation error and activate InfoCube ZCRUSDI02 anew.
thanks

ORG. Structure change.. Effect on Opportunities

Hello All,
Our client wants to do a CRM Org. Restructure to map the HR structures in ECC.
My query is :
1. What is the effect on Opportunities that already exist in our system if the org. structure changes..
2. If we give a validity date of todays date for the Sales Office ..The Opportunities which were created with this Sales office wont be editable any more isn't it?
3. Will have to re-create the existing opportunities with the new Org. structure?
3. Also, if we have to delete the Sales Office due to the org. restructure, the Opportunity will have an error isn't it as the sales office doesnt exist any more ?
Is there any other effect you can suggest..
Thanks .
Regards,
Monica

About your questions:
1. What is the effect on Opportunities that already exist in our system if the org. structure changes..
Be sure not t delete old org.units, but just to set end f validity date.
2. If we give a validity date of todays date for the Sales Office ..The Opportunities which were created with this Sales office wont be editable any more isn't it?
No, opportunities will still be editable. But you will get message, that units are not valid anymore.
3. Will have to re-create the existing opportunities with the new Org. structure?
No.
3. Also, if we have to delete the Sales Office due to the org. restructure, the Opportunity will have an error isn't it as the sales office doesnt exist any more ?
Yes, there will be error message on opportunity.

Hierarchy structure changes

Hi All,
I have one requirement at clent site where hierarchy structure changes i.e. parent child relation switches or changes from one level to another level. For example WBS element hierarchy stucture for project 101014 is:
101014--root
101014-1>101014-1-01>101014-1-01-02-->101014-1-01-02-01
after above hierarchy load to bw there are chances that hierarchy nodes change their positions.
i.e.above hierarchy node 101014-1-01 can be removed from parent(101014-1) and assigned to 101014-2.
In Next load Hierarchy need to realign/restructure according to new hierarchy tree from ECC system. Right now we are BW 7.30. Thanks for you help and gurantee of points.
Regards,
Reddy

Hi Gaurav,
Thanks for quick response, we are running process chain on daily basis which will trigger full load from ECC to BW. I thought the same but when I look below error message I think we need to some how delete hierarchy data and reload with restructed or realigned data. Please find below error details and once again thanks for your help.
Node ID 00001564 has not been included as a sibling node or as a child node
Message no. RH207
Diagnosis
The node with the ID 00001564 and the node name 101014-1-02-03 is not used as a child node (field CHILDID) or a sibling node (field NEXTID) by any node in the hierarchy. The node is also not a root node because the ID of the parent node 00001565 (field PARENTID) is not equal to 0. The node is therefore not linked into the hierarchy. Therefore the node is not connected to the hierarchy.
Procedure
This message is displayed in addition to message RH 242. The node is the root node of a subtree that is not connected to the hierarchy. For further details, see the long text for message RH 242.
4 of a total of 13,846 nodes are not included in the hierarchy
Message no. RH242
Diagnosis
The root nodes are the starting point for moving through the hierarchy. The content of the fields NEXTID and CHILDID is used to move from the current node to its sibling and child nodes.
4 out of a total of 13,846 nodes cannot be reached by moving through the hierarchy in this way. These 4 nodes are not connected to the hierarchy.
System Response
The hierarchy is not consistent and therefore cannot be activated.
Procedure
The cause of the problem is usually incorrect links to sibling nodes (field NEXTID) or child nodes (field CHILDID). An incorrect value often means that an entire subtree (consisting of several nodes) is not included in the hierarchy.
To simplify the search for incorrect links, the system identifies the nodes (from all the not connected nodes) that are not used as sibling nodes or as child nodes. These nodes are usually root nodes of subtrees that are not connected to the hierarchy. You can find these nodes in the RH 207 messages that follow.
Try to localize the problem by using the RH207 messages for help. If the hierarchy is loaded from an SAP source system, you can check whether the extracted data is correct by executing transaction RSA3 in the source system. If necessary, check if the data is modified with a user exit. If the hierarchy is loaded from a file, check the contents of this file. The problem might also be due to an error in the transfer rules or in the transformation.
Thanks
Reddy

[svn:osmf:] 16197: Config file changes to reflect the folder structure changes of libs and plugins

Revision: 16197
Revision: 16197
Author:   [email protected]
Date:     2010-05-18 15:07:01 -0700 (Tue, 18 May 2010)
Log Message:
Config file changes to reflect the folder structure changes of libs and plugins
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml

Grant,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Structure changes

Hi
Where can we see who has changed the query structure?. I knew how to see the last change, but I would like to see the whole history about the structure changes.
I did check in the follwoing tables but there is no luck.
RSZCOMPDIR
RSRREPDIR
Regards
R

Hi R
What you can do, is identify the structure ID through the table RSZELTDIR.
Once you got that id, go to the table RSZCOMPDIR and you will find the last modification author and date.
Hope it helps
Mickael

Where can I found table or structure changes across different releases ?

Hi !
Just one question:
I would like to found where can I see tables or structures changes across differents releases of SAP R/3?, i tried to found a doc about this... but i couldn't found it.
For example, which table have been modify form version 4.x to 4.z, i mean fields added or modified, etc...
Thanks in advance,
Albio.-

Hi Albio,
You can do this. You can check the activation log of any table which you have to find for change history.
Just go to se11 and type the table name click on display and then go to utilities -> then activation log, it will show you all the changes made to table
Regards
Sumit Bhutani
Ps reward pts if helpful

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps.

Table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1

Hi,
Is there any delivered report (or) excel sheet explaining the table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1
Any help on this highly appreciated.
Thanks
Soundappan
Edited by: Soundappan on Nov 1, 2012 7:04 PM

I'm not sure to understand what kind of module you're talking about.
Anyway, there are several docs available in MOS which shows the features differences over the versions, have a look :
PeopleTools Cumulative Feature Overview Tool ID 793143.1*
But I didn't find any starting by your (very old) Peopletools version.
Nicolas.

Fill structure changed

Similar Messages

Maybe you are looking for