Fill structure of IDoc via a function module

Hi all,
I have a special requirement that an IDoc has to be filled over a function module and then is sent. The IDoc is PROACT01.
So I'm looking more or less for a function module which does the same as you can do in transaction we19 (IDoc test tool). You should be able to fill the interface of the IDoc. Do you know if there are some standard function modules to do that?
Thanks for any hints
Regards
Berthold

Try this for starters - VMI_MASTERIDOC_CREATE_PROACT. You could incorporate this into your custom program if you need to control the output of the IDoc data.

Similar Messages

RE:Idoc type and function module

HI All
What are the generic IDoc types and function modules used for the following objects ??We are on SAP R/3 4.7.
Invoice Release (inbound)
Payments (outbound)
Purchase Orders (outbound)
Goods Receipts (outbound)
Cost Centers (outbound)
GL Codes (outbound)
Internal Orders (outbound)
WBS (outbound)
Materials (outbound)
Invoices (inbound)
Invoices Blocked (outbbound)
And How do i judge which IDOC types and function module fit my requirement( I mean what are the things i have to keep in mind while choosing idoc types and function modules)?
Any help will be very much appreciated
Thank you
Steve

Hi Steve...
You can find the IDOC types in Tcode WE30 , WE60.
Invoice Release (inbound)
INVOIC03
Payments (outbound)
Purchase Orders (outbound)
ORDERS03
Goods Receipts (outbound)
ACC_GOODS_MOVEMENT02
Cost Centers (outbound)
GL Codes (outbound)
Internal Orders (outbound)
WBS (outbound)
Materials (outbound)
MATMAS04
Invoices (inbound)
ACC_INVOICE_RECEIPT03
Invoices Blocked (outbbound)
REWARD IF HELPFUL.

Custom idoc [ related to function module]

HI ALL,
sorry for repeating the question
i had an requirement to create a custom idoc for catsdb table with 4 fields
1. pernr
2. workdate
3. lstar ......
and to transfer it from one application server to another.i had created it n transfered it to another application server. now my problem is in receiver side the data in idoc is not posted into database of catsdb [ at receiver side].
can any one give the code for Custom function module at receiver side so that when idoc is received [from sender] it must be updated to databse tables via this FM.
its very urgent . help me ........................
any suggestions are highly appreciated.
with regards,
Suresh Aluri.

Hi Suresh,
In the receiver system you have to :
1. Create a process code and link with message type using WE42
2. Create an inbound function module using SE37.
For example: BAPI_IDOC_INPUT1
3. Link function module with basic type and message type using WE57
Regards,
Hendy

Unable to generate IDOCS using IDOC_INPUT_ORDERS Function Module

Hi,
I have written a program to post IDOCS using function module IDOC_INPUT_ORDERS .
In the debugging mode,I found that after the call of this function-module,sy-subrc is set to zero which means that this function-module is getting successfully executed.
But when I go to WE02 transaction code , i do not see any IDOCS being generated for IDOC Type ORDERS05 .
Please could someone help me out with this .
Regards,
Sushanth H.S.

hi
check your ALE configuration:
go thru the links:
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
reward points for useful ans
Regards
Aarti

JDBC to IDoc (Custom inbound function module)

Hi,
In my scenario JDBC to IDoc, I am using a custom function module to change the planned order. When I exectue the function module in WE19, it works fine and the IDoc status is also updated correctly.
But when I execute the entire interface right from JDBC, the status of the IDoc is set to 51 and the description it is giving is "No status record was passed to ALE by the application".
Can any one help me with this, where exactly is the error?

For IDOC status 51 : Inbound IDOC
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...

Structure of Dynamic Table in Function Module

Hi,
I'm trying to find a way to get as OUTPUT a dynamic Table from a Function Module.
I declared a table called T_DATA without a type.
And this table should have a dynamic table back.
The problem that I get the data back but, I only found a data without any field-elements.
The data is there but there's no structure, no table.
Is there any way that I can send the Data in a proper structure?

Hi
 Try using the following code
type-pools:slis.
data:it_fcat type lvc_t_fcat,
 wa_fcat type lvc_s_fcat,
 itab type ref to data.
data:it_fcat1 type slis_t_fieldcat_alv,
 wa_fcat1 like line of it_fcat1.
data:cl_tab type ref to cl_alv_table_create,
 wa_ref type ref to data.
field-symbols:<itab> type table,
 <wa> type any,
 <comp>.
create object cl_tab.
refresh:it_fcat.
wa_fcat-fieldname = 'NAME'.
wa_fcat-inttype = 'C'.
wa_fcat-intlen = '10'.
wa_fcat1-fieldname = 'NAME'.
wa_fcat1-inttype = 'C'.
wa_fcat1-intlen = '10'.
append wa_fcat to it_fcat.
append wa_fcat1 to it_fcat1.
wa_fcat-fieldname = 'NAME2'.
wa_fcat-datatype = 'CHAR10'.
wa_fcat1-fieldname = 'NAME2'.
wa_fcat1-datatype = 'CHAR10'.
append wa_fcat to it_fcat.
append wa_fcat1 to it_fcat1.
cl_alv_table_create=>create_dynamic_table(
exporting
 I_STYLE_TABLE = I_STYLE_TABLE
 it_fieldcatalog = it_fcat
 I_LENGTH_IN_BYTE = I_LENGTH_IN_BYTE
importing
 ep_table = itab
 E_STYLE_FNAME = E_STYLE_FNAME
EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
assign itab->* to <itab>.
create data wa_ref like line of <itab>.
assign wa_ref->* to <wa>.
do.
assign component 'NAME' of structure <wa> to <comp>.
<comp> = 'AA'.
unassign <comp>.
assign component 'NAME2' of structure <wa> to <comp>.
<comp> = 'AB'.
insert <wa> into table <itab>.
exit.
enddo.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_GRID_TITLE
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
 it_fieldcat = it_fcat1
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
tables
 t_outtab = <itab>
EXCEPTIONS
PROGRAM_ERROR = 1
Regards

Inconsistent Errors when processing IDocs using custom Function Module

I am encountering a most perplexing error. Here is the situation.
We have a custom function module to update data in the EH&S system. We are having a bizarre error occurring. This is the basic processing of the function module:
1. IDoc data is read and loaded into an internal table.
2. Data is run through a series of checks to determine if the data is valid for entry into the system.
3. After validation we use function module C1F2_SUBSTANCES_READ_WITH_REF to read characteristic data for the substance. This data is used to validate whether current data exists to allow for loading of the IDoc data. (This is the step where the IDoc is receiving an error even if the data is valid. This only occurs if we are processing a large amount of Idocs and one IDoc contains valid data and another invalid data for the same substance. It occurs even if the Idocs are not processed in sequence. If individually processed or reprocessed after initial failure they pass. This is what is so confusing!) If it exists, a flag is set and the data is loaded using function module BAPI_BUS1077_CHANGE to modify the data.
4. If the flag is set to allow further processing, the function module C1F2_SUBSTANCES_READ_WITH_REF is used again to select different characteristic data for the substance. A similar validation process occurs and if it passes, data is loaded using BAPI_BUS1077_CHANGE to update and BAPI_BUS1077_CREATE to create new data.
Here is the situation:
When processing one valid record for one substance, the record loads successfully. When processing multiple valid records (all are valid) for one substance, they all load successfully. The problem occurs when attempting to load valid and invalid records for the same substance. Some times the program successfully loads the valid data (as expected). Other times, it will not load any records. It is not consistent!
The order of IDoc processing does not have an impact on the success of the load. Whether the valid or invalid record processes first does not have an impact on the success of the valid substance load.
Does anyone have ANY Idea of what is going on? I am clearing all fields in the function module before processing occurs. I cannot find what is causing the error to occur.
HELP!
Jim Hardy

I have some further information. It seems that if data for a substance is sent in two separate Idocs, one with valid and one with invalid data, As long as the two IDocs are processed consecutively, they process correctly. If they are separated by IDocs containing other substance information, they fail.
thanks
Jim

IDOC types by Function Module

Hello,
I would like to find the IDOC types available by function module. For example, all idoc types for Production Planning module. Is there an easy way to get that info?
Thanks

Hi,
Go to Repository Browser (SE80) -> select Appliction Hierarchy and filter it down by Function Modules. you can now go to individual functional area (SD, MM , PP, etc) and drill down EDI objects hierarchy. You can very well judge the IDOC types based on IDOC Processing function modules.
Hope this will help...
regards,
PB

Structure of ITABs in GRAPH_MATRIX_3D function module?

What should be the structure of the internal tables DATA & OPTS for the function GRAPH_MATRIX_3D?

The DATA table provides the function module with the data for the graph. Each row in the table has the following fields:
Data text: a label for this row of data values in the graph. This field is a character string of any length.
Any number of data values: the numeric values to be represented in the graph. These fields can be of type P or F.
For example
DATA: BEGIN OF gt_data occurs 0,
DATANAME(15),
QUANTITY1 TYPE I,
QUANTITY2 TYPE I,
QUANTITY3 TYPE I,
END OF gt_data.
Options table
This parameter contains a table of display options. Setting the OPTS parameter allows the ABAP program to determine the appearance of the generated graph. You can set any display option available to the online user in the SAP Business Graphics menus.
Setting options in this table only determines the initial appearance of the display. The online user is still free to reset these options once the display appears on the monitor screen.
Each element in the OPTS table is a string with the format:
OptionKey = Value
for example
BEGIN OF gt_options OCCURS 0,
OPTION(20),
END OF gt_options.
You can have a look at the SAP Demo program BCGRBU99

IDOC from inbound function module

Hi All,
I have a inbound function module..
I dont know its Idoc type.
Ho to find the IDOC based on Inbound Function module
Thanks
Amruta

Hi Amruta
Inbound Function Moduel always in the format of IDOC_INPUT_XXXXXXX
xxxxxx is the your Message type...
Based on you message type u can get you idoc type....
if function moduel is Standard one ...
Thanks
Ram

IDOC error 51- Function module not allowed:

Hi,
I am getting following error in IDOC inbouond.I verifyed all parameters mentioned in error.
Issue still not resolved.
When debugged from WE19 this issue dosnt arise.
Kindly guide.
Function module not allowed: ZIDOC_INPUT_MATCLASS
Message no. B1252
Diagnosis
The function module ZIDOC_INPUT_MATCLASS and the application object type BUS1001 which were determined are not valid for this IDoc.
Procedure
1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.

Hi,
Check in WE42, for the process code, you have assigned this function module and given the correct process code in the partner profile.
Sujay

Idoc error 51 - "Function module not allowed - APPL_IDOC_INPUT1'

Hello everyone,
We are uploading GL balances from legacy to SAP using the LSMW Bapi
object - bus6035
method - post
message type - ACC_DOCUMENT
Basic type - ACC_DOCUMENT03
When we run the lsmw, idoc is created, however with an error 51 saying
"Function module not allowed - APPL_IDOC_INPUT1'
The partner no. is the logical system (the system on which the lsmw is executed)
In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
Please let me know if we are missing something or doing anything wrong ?
Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
Thanks,
Sushil Joshi`

Hello Sushil
The long text of message B1(252) is quite informative for error analysis:
NA B1252
Short Text
     Function module not allowed: &
Diagnosis
     The function module and the application object type which were
     determined are not valid for this IDoc.
Procedure
     1. Please check that the process code in the inbound partner profile
         is correct.
     2. If this is the case, you should check the ALE inbound methods ALE
         inbound methods for the process code and see whether the specified
         function module and application object type are correct.
     3. If this is also the case, then the function module and the
         application object type are not permitted for the logical message
         type, message variant, message function and basis type that are
         contained in the IDoc control record. You should check whether the
         correct values have been assigned to these fields in the control
         record. If they do have the correct values, then the assignment to
         the function module and the application object type needs to be
         maintained.
On ECC 6.0 this long text contains 3 transactions for analysis:
- WE20
- BD67
- WE57
Regards
Uwe

IDOC inbound processing ( Function module Rquired )

Hi,
I am working on IDOC inbound, I am looking for a standard FM for Production order confirmation which i need to assign in WE57 along with the standard Message type(Production order confirmation).
Could you please let me know where i can get the standard inbound function modules for the standard idoc types,
for eg: IDOC_INPUT_ORDERS for sales order.
Thanks.
Krishnakumar

Hi,
Go to WE42 for inbound processing codes and WE41 for outbound.
OR
We have WE19 which is a test tool for IDOC processing.
Provide the IDOC number then press F8, then in the next screen , you will have inbound function module.
Click that button. Then enter the text in search criteria.
Then you can get related function module.
Reward points if helpful.
Thanks and Regards

IDOC OUTBOUND NAMING FUNCTION MODULE

Is there any way to debug the function module that is called to name the outbound idoc through the file port?
Ross Goodman

Hi
are you not able to reach by applying break point. Try checking the option system debugging and uodate debugging and then Try
Naresh

Procedure for Mapping two types of Idocs from RFC function Module

Hi
My Scenario is RFC -- XI -- IDOC
Here i have 2 custom Idocs
First IDOC for Creation
second is for Deletion/Changing
Based on the condition from RFC it should trigger either one of the IDOC above.
Please provide me the procedure to do in IR and ID..
Regards,
Yeswanth.

YeswanthRaj:
I found your conflicted statements
The following statement you say you just have one receiver, to receive two IDOCs
But i have only one receiver where the 2 IDOcs needs to be send based on the condition..
The following statements showing that you have more than one receiver,
the condition editor for receiver determination usually used for multiple receivers based on XPATH or Context Object condition
It is mapped based on the condition that is given in Receiver Determination and i has two interface Determinations.
It seems that the first scenario is your situation.
If your answer is yes, and your source interface is just one,and target interface is two (two IDOC), then this should be typical
muti-mapping scenario, and the propose I gave to you should fit
Regards.
Liang

Fill structure of IDoc via a function module

Similar Messages

Maybe you are looking for