Fill the screen is too big

When I zoom to fill the screen the window expands under the layers panel.  Is there a way to to make it stop at the panel and not under it?

You have a few solutions for your issue:
1. If you're unsure about docking, on the top right hand side, you can 'Reset' your workspace.
Photoshop > Window (on Menubar) > Workspace > Reset (Essentials) or whatever workspace you're currently on.
If you have custom panels open in your workspace, you may want to 'Save' your workspace before 'Resetting' to a system preset. Resetting to 'Essentials' will dock all panels by default.
2. Change your Screen Mode by pressing 'F' key while you're in Photoshop with your document open. This will toggle through 3 screen modes that PS has. The first 'F' press will go to Full Screen with Menu Bar. The second F press will go to Full Screen only (all tabs/ panels hidden).
3. Press 'Tab' key when your document is open. This will toggle toolbar & panels on/ off. Press 'Tab' again to bring them back.
All 3 solutions will let you work on your canvas without having to worry about a panel hiding your canvas/ work area.

Similar Messages

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

    Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

    Morning DeeHutton,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

  • How Can I Change the Size of My Home Page So That It Fills the Screen?

    I have a PowerBook G4. Up until a couple of weeks ago when I opened Safari the home page filled the screen. Something has happened and now it fills only a portion of the screen. I can move the page around, change the size slightly by using the green button next to the minimizing button, but nothing I do will enlarge it to fill the screen. I have gone to View and Preferences, but find nothing to resolve this. Please help!

    You're welcome Maureen. Glad I could help.
    Thanks for the and Aloha from Big Island.

  • How can I make iPhone 4S Video's fill the screen when using them in iMovie 11 on My MacBook Pro

    Hey Guys.
    I am a singer songwriter from he UK.... I recently bought an Iphone4s, Ipad and Mac book pro (haha, apple hero, I know). I have always wanted to make the big jump to apple, just was waiting a little while.
    I am thrilled so far, it's all great. But, I use Imovie (i am still getting to grips with it, but the features are amazing) to make videos of me singing coversand original videos for youtube.
    The Camera on the iphone4s is great.
    But, when I import videos into Imovie11, the videos do not fill the screen in their original form.
    In some videos, I use the Ken Burns effect. Now, on the parts of my video when I use this effect, it fills the screen as it should do.
    Why do the videos in their untampered form not do this?  I have tried importing widescreen, original size, and Large, but it alwys sits in the middle of the screen, fairly thin lookin. It fills the screen when it's on my Iphone, I am very lost.
    plesse help.
    thanks.

    if i can offer any more info please just ask

  • I have a 22 inch monitor set at 150% but since I installed Firefox, the font is too small and the screen is too small. Cannot make font or screen larger. I can do Control++ each time I enter a page but don't want that to be my solution.

    In control panel/display, I had my display set at 150% and at 1680 X 1050 resolution. This filled my 22 inch screen with the page content. Now that I have installed Firefox, the font is too small and the content is centered in the screen leaving about3" per side of blank space. I want to fill the screen and make everything larger. Haven't found a way to do that. Firefox tells me in my control panel/display window that by setting my display at 150%, "some items may not fit in your screen if you choose this setting while your display is set to this resolution. It worked fine with Explorer.

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • Unable to get HD Wide Screen 16:9 to fill the screen on TV.

    12/20/08
    Problem: I am not able to get HD Wide Screen 16:9 to fill the screen on TV. Leaves dark bands on the top and bottom of picture.
    What I'm working with: Mac Pro Quad-Core Intel Xeon Processors with 2GB Memory soon to be 6GB & 30 inch screen. QuickTime Pro 7.5.5, Final Cut Express 4.0.1, and iDVD, 7.0.2.
    New JVC, GZ-HD3U camcorder with QuickTime conversion software, recently updated, provided by JVC with the camera to change native TOD. files created in the camcorder to native MPEG2 files in Quicktime at a size of 1920 x 1080.
    Two TV's, one Wide Screen HD and the other standard screen. I have changed the TV aspect rations back and forth from 4:3 to 16:9 and the only thing that changes is the size of the black bands on the top and bottom of the screen. The black spaces are larger in 16:9, making the picture appear squeezed.
    I am using RW DVD discs so I can continue to try different setups without wasting discs and so far I have tried about 12 different arrangements. Two methods work but they are export conversions to a 4:3 aspect ratio and 720X480DV/DVCPRO-NTSC. Certainly this is a work around, but doing this looses the Wide Screen HD effects provided by the original JVC movies.
    When I import the clips, and I've tried a number of different imports from QuickTime to Final Cut Express, I make sure that the Sequence set up matches or comes as close as possible to the imported clips. I've tried exporting them from FCE without changes and I have exported them using QuickTime to change them to different formats using nearly everything available trying to get the clips or sequences ready to import to iDVD.
    In iDVD I have set up using both aspect ratios and it appears as thought setting up in 16:9 makes the spaces above and below even larger on TV. In fact it creates these spaces above and below even on the 720X480DV/DVCPRO-NTSC clips that work just fine on the 4:3 aspect ratio settings on the same TV.
    If anyone has overcome this problem, I would greatly appreciate your guidance. So far, I've spent over a 100 hours on it to no avail.
    Larry

    Tom, I don't know where to go in FCE to create a AVCHD AIC Sequence. I can find the
    1920X1080i60 in the Sequence format without any problem. And in QT don't know where to select AIC but I select Apple Intermediate Codec, and under compressor I select HDV 1080i interlaced frame rate 29.97. Under Export Size Settings I don't know rather to select 1920 x 1080 HD or HD 1920 x 1080 16:9 and what about preserve aspect ratio using and Deinterlace Source Video?
    Part two: When I create a Sequence in FCE with the 1920X1080i60 designation, and then import a QT HD 1920X1080 16:9 Intermediate Codec clip into a bin and then open the clip in that sequence I'm asked if I want to match the clip to the sequence and if I don't I have rendering. If I match them the rendering, as you said, goes away. However, I notice that when I check out the Item Properties on them after the above process, the Aspect ratio in the clip and Sequence, suddenly becomes HD 1440x1080. Is this normal?
    Larry

  • I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    Use DropBox. https://www.dropbox.com/help/84/en
     Cheers, Tom

  • Is it possible to get the image from the i pad when mirroring via Apple TV to fill the screen instead of appearing as a screen within a screen?

    When mirroring, is it possible to get the image from the ipad to fill the screen on the TV instead of appearing as a screen within a screen?

    Welcome to the Apple Community.
    No, the iPad has an aspect ratio of 4:3, a TV has an aspect ratio of 16:9, to fit one into the other is impossible without distorting the picture. If your TV has a zoom feature, you may be able to use this to fill the screen a little more to your liking, but this will result in cropping top and bottom.

  • Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

    I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
    Theo Smith

    I sent the screenshot via an e-mail attachment. I wasn't aware  that
    attachments could not be forwarded this way. I will send it again. First  time
    I've utilized this service.
    In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Dvd  burned in premiere pro cc does not fill the screen. Desire a 4:3
    aspect  ratio
    created by Peru Bob (https://forums.adobe.com/people/Peru+Bob)  in Adobe 
    Media Encoder (AME) - View the full  discussion
    (https://forums.adobe.com/message/7264779#7264779)

  • IPhone IOS 7.1 incoming call picture size now small. How can I get it to fill the screen like before?

    Just had the upgrade to IOS 7.1 and now with an incoming call, the associated picture is just a thumbnail, instead of filling the screen.  Anyone know how to change this?  I tried specifically associating a picture on my phone with a contact and trying it, but still was a thumbnail. 

    This change that Apple made is disconcerting.  It shows that whomever is now in-charge of these decisions at Apple doesn't have what it takes.   There's something seriously missing with this decision and the change to less usability is incredibly misguided.   Who wants their contacts to appear in a little cartoon-like round bubble and the incoming caller can't easily be recognized??   As someone who has used a Mac since 1984, there's something seriously wrong with their design guidance.  Apple likes to create products that "delight" and this doesn't.

  • Image doesn't fill the screen on my mac book, Why?

    I have two black strips, one up each side of the screen and I can't find away of getting the image to fill the screen again.

    it doesn't sound like you actually figured it out.
    image taken fromt he web and edited to show you where the setting are.
    You can choose to right click your desktop or go to system preferenes. they all lead you to this screen.
    if you are in system preferences and don't see where Desktop & Screen Saver settings are just type it in the search area.
    this image was found in a google search.

  • Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Check to see if the resolution has been changed in System Preferences.
    Allan

  • How to FILL the Screen in iPhoto 11

    I have a 27" iMac.
    I want to FILL the screen in iPhoto like I can with the desktop feature to fill the screen.
    The full-screen option in iPhoto only fills about 2/3 of the 27" monitor with aphoto in landscape [versus portrait] orientation. Less than that with portrait orientation. Obviously, the bigger, the better to see, and I would like to take advantage of my monitor size.
    Message was edited by: IleneEllen

    Welcom3 to the discussions, smbc.
    Although these options exist, an LCD monitor uses real pixels and is really intended to be run at the native (ie maximum) resolution. It will look pretty terrible otherwise.

  • Setting objects to fill the screen

    I'm trying to have my background with various color panels to sit behind text so that when I change the subject I can change the color. Also if the the text extends or shortens I would like to go in and pull up or pull or down this box to cover the edited text. Here is an example of what I mean...
    So I try this in Muse as a test and I seem to fill the screen like so.....
    However when I preview in browser this happens....
    I've set my page properties to page width 1024, min height 768, mm margins at 20 and the rest are all the default settings. I would like to remove the background so that my colored blocks would cover it. Here I have designed a white BG with cross in the middle. What should I do with my BG setting?
    Really grateful for any help you can give on this, I just cant work it out!
    Chris Kimber

    Hello,
    You cannot place a 100% screen width item in the background as Browser fill.
    However you can place a rectangle on the page itself (either on Master page or on page itself) which can cover 100% browser width.
    Please refer to the view : http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/
    Hope this helps.
    Regards,
    Sachin

Maybe you are looking for