Filled form in greek does not show "pi" character unless field clicked. Why?

Hello again,
I am trying to make one pdf form suitable to be filled in a lot of different languages and, as long as I am testing it, it seems to work, except from Greek. Somebody has filled the form in Greek, and say they cannot write "pi" character, and the form I have received from them shows a dot where that character should be, but if I click the textfield then the dots show the text fine, including "pi".
The font I applied in the "appearance" tab for the textfields is Arial Narrow. Should I use specifically a Greek font for the Greece form? Is not true that Acrobat Reader use local fonts for filling the forms?
Thank you for your help!
Ardid

the form did not work for most email in the Label  "College Sports"'
the values of the parameters did not agree with email prefixes.
(i.e., was  [email protected]  --->> @collegestudentvoice.net)
This is the only thing that i changed
The form was test from a different PC and also did not work.

Similar Messages

  • I changed my browser fill and the update does not show in the preview mode

    I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

    Hello,
    What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
    Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
    Cheers
    Parikshit

  • HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

    My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

  • The Airplay icon does not show, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    The Airplay icon does not show on my Mac Pro, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
    About AirPlay Mirroring in OS X

  • Plz. help,table does not show value for one field

    hi all,
    i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
    i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
    plz. help ASAP.
    the code is as under
    <HTML>
    <HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
    <BODY bgcolor = "yellow">
    <%@ page import = "java.sql.*" %>
         <%! // declaring variables
    String s = "";
    java.sql.ResultSet rs=null,rs1=null,rs2=null;
    java.sql.Connection con;
    java.sql.Statement stmt,stmt1;
    String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
    %>
    Following are the pending complaints ..
         <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
         <TR>
         <TD> ComplainD </TD>
    <TD> ComplainId </TD>     
    <TD> ProbHeader </TD>     
    <!--
    <TD> ProblemDescription </TD>     
    <TD> Problem Comments </TD>     
    -->
    </TR>
         <%
         try
         Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
         java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
         //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
              java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
              s = "select * from Complains";
         java.sql.ResultSet rs = stmt.executeQuery(s);               
                        while(rs.next())
                        //getting data from database
                                                           empId = rs.getString("EmpId");                    // out.print(" " + empId);
              compid = rs.getString("ComplainId");
              // out.print(" " + compid);
              calltype = rs.getString("CallType");
              // out.print(" " + calltype);
                        a = rs.getString("Complaindate"); //problem with this field
    out.print(a); // prints value
              %>               
                        <TR>      
                        <TD> <%=compid %> </TD>
                        <TD> <%=calltype %> </TD>     
                        <TD <%=a %> </TD>
                                       </TR>
    <%
                        }//while loop          
         %>
         </TABLE>     
         <%                
         }//try
              catch(Exception ep)
              out.println(ep);
              System.exit(1);
    %>
    </BODY>
    </HTML>
    value in database is as follows :-
    Complaindate
    5/18/2003 1:30:27 PM
    5/18/2003 7:32:43 PM
    5/18/2003 7:34:02 PM
    5/18/2003 7:49:19 PM
    5/18/2003 7:50:27 PM
    5/18/2003 10:49:42 PM
    5/18/2003 10:58:24 PM
    thanking u ,plz ask if any further clarifications

    Hi
    I am seeing nothing wrong with ur code..
    what about "view source" result.....plz check with that...
    whether u r getting all the trs and tds...
    revert back on this Issue..
    Mars Amutha

  • My DW CC latest version does not show me the text field option when trying to make a form!!! P

    So when I youtube the same version as mine it still show to other users the text field option but on my insert panel under forms it does not give me the option
    PLEASE HELP

    Hi Taatueeyy,
    As this sound weird issue, I'll suggest you to clear preferences and then try launching.
    How to clean preferences, please check the below link
    http://forums.adobe.com/thread/494811
    If this doesn't resolve your problem. please reveret.

  • Using Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not show in the location bar. Why?

    When I open a web page link in "a new window" the link opens, but the web page information does not appear in the location bar. It is blank. If I open the link in a new tab, there is ho problem.
    Further, if a open a link from the tab without a location in a new tab on the same window and then go back to the original tab, the location bar fills with the web address.
    Have done this starting in several locations, so it not location dependent.

    That behaviour is likely top be caused by an add-on, and in your case the likely culprit is IE Tab 2, the various versions of IE Tab have caused problems with Firefox 4 beta including issues with the location bar not being updated.
    You can test to see if IE Tab 2 is causing your problem by disabling it and then seeing if the location bar in a new window shows the address. If it is not that add-on causing the problem, see [[troubleshooting extensions and themes]].
    For info, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you may want to try that one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

  • Document does not show opened file unless "Revert to Saved" is selected.

    I have a readFromData:ofType:error: but when it executes, the document screen still does not change. The user must select the "Revert to Saved" menu option for the document to show the changes. Any ideas?

    Laura Quitugua wrote:
    Hi,
    I have syced my outlook email with my iphone 4s and ipad.
    Note that only the email account info (username, login, server)  is sync'd.
    The actual emails are not sync'd.
    Opening an email on one device does nothing on teh other devices.

  • The option to Set Breakpoints does not show up when I right-click any step

    Hi All,
    I am working with a SSIS package and trying to set breakpoints to view the contents of package scoped variables. I am running SQL Server 2008 R2 on Windows Server 2008 R2 and developing in Visual Studio 2008.
    When I right-click on an Execute SQL Task (or ANY step in the package) I see no menu pick to "Edit Breakpoints" or "Set Breakpoint". Can someone tell me why that option is missing?
    TIA

    Arthur,
    Thank you so much.
    Your answer might seem obvious to most everyone but me. The SSIS package was part of a larger ASP.NET Web Site project. As a result whenever I opened the Web Site Project the package showed up in the Solution Explorer and of course I just opened it. Nowhere
    have I read that if the package is opened in that manner so many development features would be missing.
    How foolish of me to also assume that if I started "SQL Server Business Intelligence Development Studio" and simply opened a package...that those critical features would not appear. Live and learn. LOL
    Have a great day!

  • Safari 7.0.5 does not show an entire web site. Why ?

    Hi, I normally use Safari 7.0.5, and my home page is www.liquida.it
    Since three days ago, when I open Safari the home page of this web site is not displayed, even if I write it separately.
    I have already cancelled the cache memory and restored Safari to the original settings, buti apparently there is nothing to do.
    The strange thing is that if I try to open it with Firefox or Chrome it runs correctly.
    Is somebody so kind to suggest me what to do ?
    Thank you
    Franco

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • My wd passport does not show files on mbp retina? why?

    so i have just bought the new mbp with retina display.
    i have an oldish wd passport (usb 2.0, 500gb) that works on my old macbook from 2007.
    however, when i plug it in to my new mackbook, it registers the passport but none of the files come up?
    can anyone help me with this?

    Contact the passport vendor.

  • Date field submited via my custom form does not show in mysql database

    I created a form with the custom form wizard with a birthdate field having the date picker feature. i set the birthdate field to sumit date as date datatype. My birthdate column in mysql database is datatype date. but when i submit the form the date does not show in mysql database. what should i do pls. is the problem with my form or with my database birtdate column.
    Thanks

    zeeztaz wrote:
    iis the problem with my form or with my database birtdate column.
    Thanks
    please post the complete code of the page which contains that form, otherwise it will be impossible to detect the possible reason for this error.
    Cheers,
    Günter

  • Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

    Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

    You can do this with "composition" widgets.

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • Sometimes JavaFX form (BorderPane) does not show correctly

    We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
    We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
    Additional information:
    the form (BorderPane) is loaded during application start-up but it is not shown initially,
    to show the form we remove previous contents from a StackPane and add the form instead,
    to hide the form we do the reverse.
    Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

    I am unaware of any such issue being reported previously.
    Without a reproducible test case, you are unlikely to get much assistance.
    Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
    There were many bug fixes implemented for Java 8.
    I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
    If the issue still reproduces, create a bug report which includes your test case and full environment details.

Maybe you are looking for