Filled game currency when there is an error message

When I recharge the game, it told me"your purchase could not be completed".
The first time I recharge successful, but the second time, it give me error.

An error in updating does not delete backups. Identifying the error is important. See this support document to investigate the error. Resolve iOS update and restore errors - Apple Support

Similar Messages

HT201413 HOw can I update my phone when there is an error message!?

My phone was updating - then there was an error - now I have no back ups and the only option is to restore factory defaults?!

An error in updating does not delete backups. Identifying the error is important. See this support document to investigate the error. Resolve iOS update and restore errors - Apple Support

Alert is triggered daily even if there are no error messages

Hi,
I have done Alert Configuration for a service with the help of a document from SCN. It is successful when an error occurs.
But I get an alert email Daily(even when there are no errors) and the message and service details mentioned in the mail will be blank.
eg: Below are the error message details
MessageID:
Service:
I want the mail to be triggered only when there is an error message.
So could someone please help with the solution or guide me with the links of documents or threads that can provide the solution.
Thanks In Advance

hi
plz refer the following link
http://forums.sdn.sap.com/thread.jspa?threadID=2147596&tstart=60

HT204088 The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

You are not able to view purchase history on your iOS device. You may only re-download previous purchases from the iOS device.
To review your iTunes Store account's purchase history, follow the steps in this article from a computer only:
Seeing your iTunes Store purchase history and order numbers
http://support.apple.com/kb/HT2727

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT1338 I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

Switching an iTunes Store account to a different country
http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
 Cheers, Tom

Hi, I am running windows 7 and currently firefox 3.6.... When i download and install firefox 4 or 5 it appears to be successfull but when i try open it, nothing appears to happen, although there is no error message. Any ideas?

Hi, I am running windows 7 and currently firefox 3.6.... When i download and install firefox 4 or 5 it appears to be successfull but when i try open it, nothing appears to happen, although there is no error message. Any ideas?

Hi, I am running windows 7 and currently firefox 3.6.... When i download and install firefox 4 or 5 it appears to be successfull but when i try open it, nothing appears to happen, although there is no error message. Any ideas?

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

Calling a subpanel, pops up in own window instead of sub panel when there is an error

Hi all. I am working on my first real LV project for my company, and I am having some problems. The main one right now happens when I am trying to call a subVI into a subpanel. It shows up in the subpanel just fine when the program starts, but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window. Anyone have an idea on what I am doing wrong? I have included a picture of how I am trying to populate the subpanel.
Attachments:
subpanel.jpg ‏59 KB

robot_mower_guy wrote:
but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window.
I assume you have an error handling case in your state machine. So if an error happens in your error handler, you will have be passing that error around the shift register. Yes, that will mean that the invoke node ot insert the VI will not run due to the error. You need to handle your error from the error handling state.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" How do I fix this?

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" I can burn in windows media but not itunes. I have tried to uninstall and reinstall itunes but it still does not work. Please help!!

I ran the diagnostics check and this is the message:
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 10.7.0.21
QuickTime 7.7.3
FairPlay 2.2.19
Apple Application Support 2.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00C4AB4403487290
Current user is not an administrator.
The current local date and time is 2012-12-05 23:52:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
The driver AFS.SYS is installed on the system.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Prevent save Message when there is an error

Hi all,
Please help me out here.
I want to prevent saving a new Support Desk Message when there is an error in the message.
Kind regards,
Remy Piets

Hey Remy,
This can be achieved if you are ready to do some coding...
U need to use implement BADI ORDER_SAVE..
Within this BADI u can have your business validations done...
If the Validations fails then you have to raise an exception DO_NOT_SAVE...
This is satisfy your requirment.....
Reward for usefull post...
Regards,
Anand........

TBridge limitations: when there is an error, the message is put back in the source QSPACE

The "WebLogic Tuxedo Connector Administration Guide" (BEA WLS 6.1, December 19, 2001)
Chapter 5: "Configuring tBridge",
last section: "Limitations"
mentions: "when there is an error, the message is put back in the source QSPACE.
Assuming the QSPACE is corrupted or full, subsequent messages would be lost."
QUESTION: will be this limitation
(a single message having permanent errors will stay forever in the head of the fifo
queue -->
resulting in QSPACE full --> reulting in loss of all messages)
be solved in a future version ?
If YES, WHEN ?
thank you
Justin

See:
* [[Cannot log in to websites]]
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

There is the error message when we run IR8A report

Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.

Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s

I must re-install HDD, when tried to install application DVD with iPhoto,there was a error message, could not instal it again, I have LION 10.7.3. How can install application DVD again?

I must re-install HDD, but when tried to install application DVD with iPhoto,there was a error message, could not instal it again,
I have LION 10.7.3.
How can install application DVD again?
thanks
Dimitar

I've asked the hosts to move this post to Lion.
Here is a better place for you Lion posts.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
What is HDD?
How to install most applications from DVD.
Place dvd in dvd drive.
Double click on dvd image if a folder didn't appear.
Double click on application icon in drive folder.
follow instructions.
Robert

Filled game currency when there is an error message

Similar Messages

Maybe you are looking for