Filling gap in video track

This is pretty lame but I have forgotten the shortcut to close a gap in the video track by moving all the clips behind it forward. Moving each clip to close the gap is, of course, a pain.
Any help?

Man, you gotta be careful locking tracks and then making any changes. Many's the time I've done this only to find all sorts of things out of synch downstream. Now I never lock anything--it's too risky.
If you have a gap in your track, hold down the control key, put the arrow tool (the "selection tool") on the gap, and hold down the mouse button. Some options will pop up. One of them is "Close Gap." That will snap the gap shut, as long as there is nothing overlapping the gap on either the video or audio tracks.
Another way to shut the gap, even if there are things on other tracks overlapping the gap, is to choose the "Select All Tracks Forward" tool--the one with one arrow above the other pointing to the right (hitting the t key four times will choose it), and then click that tool just to the right of the gap to select everything on all tracks from the gap on down to the end. Then you can slide everything on that side of the gap forward to close the gap. (If you have "Snapping" turned on while you do this, the clips on either side of the gap will snap together when you push them close enough. That way, you won't accidentally overlap them. If you do overlap them, and start losing control, just let go of everything and choose "Undo" from the Edit menu (or Command-Z on the keyboard), and then try again. Whenever I start making a mess I just stop everything and choose "Undo."

Similar Messages

  • Moving clips and closing gap across all tracks - premiere4

    HI, I have multiple clips spread across 3 tracks. There are gaps between clips that I want to make shorter - but still leaving black or empty sections. I cannot find a way to move a clip to the left so that all clips on all lanes to the right (ie afterwards) move along with it whilst keeping their relative postions vertically.
    I can see how to do this by selecting everything to the right but this would be incredibly tedious. I want to be able to, say, grab a clip on track 3 at 45secs, drag it to 43 secs and all the clips on tracks 1 and 2 and 3 etc also move 2 secs to the left.
    Any hints?
    thanks, Greg

    I have run some tests and still not getting the behaviour I want.
    I started a new project and inserted three clips - one clip to each of video tracks 1, 2 and 3. I ctrl+drag the video 3 clip to the left and the other two clips (tracks 1 and 2) move but do not keep their positions relative to the track 3 clip. Instead they advance just by the length of the moved clip. This means that the length of any gaps between clips is not preserved.
    The outcome can be that clips that were not overlapping are now overlapping, or clips that had a small gap between them now have a large gap.
    I would really like to be able to keep the relative position of the clips when I move a single clip along the timeline.
    thanks, Greg

  • Hiding video tracks

    I'm making a music video. And I have multiple shots of the same sung verse. I've lined up all 10 shots with the music track... so that the lip synching is right. Now I want to cut between the best bits of each shot. How can I preview each shot to decide the best bits? Right now it is only showing the video on the topmost track. Is there a way to hide tracks to show just one video track? In a music sequencing app you'd just 'mute' the track you don't want to 'hear'. Is there something comparable in video – like, 'muting' the track you don't want to 'see'?
    Thanks
    Reuben

    The workflow you are describing can be painful to work with. You can disable individual tracks with the green buttons on the left of the timeline, but this will trash your renders. You want to do a multiclip edit.
    Using multiclip in FCP is fairly easy, but your computer must be powerful enough to play back multiple streams of video. You combine several clips into a single "multiclip". I set an in point in each "angle" to provide a sync point when I make the multiclip. Use the multiclip editing keyboard layout preset, and you can switch and cut to angles using the numeric keypad. Put the multclip into a sequence and open it into the viewer, and set the sync (the "other" dropdown at the top of the viewer) to "open", which synchronizes playback of the canvas and viewer.
    The limitation of multiclip is that each angle may only be comprised of a single clip. If your cameras were starting and stopping, and you have gaps in any of the tracks in the sequence you used to build your sync, you must start a new multiclip at this point.
    However, there is a cool workaround for this. You can take your "syncing" sequence, and export each track to a quicktime reference movie. Now you have continuous pieces you can use for your multiclip angles. You may wish to retroactively apply the correct reel name and timecode to these new reference movie clips.
    If your system isn't doing well enough with multiclip playback (HDV is hard for multiclip) I have also used what I call the poor editors multiclip: make a version of your sequence in which you manually put your angles 4-up or however-many-up in your frame and export a self-contained movie. I put this on a hidden track in my sequence and match frame it into the viewer, or turn on the sync. This requires manually cutting through the tracks on top to show the ones below, but you can use the multiple view movie to see where you want to cut to.
    Hope this helps -
    Max Average

  • Long load times for large video tracks

    Is there a recommended file size to stay under for video tracks in iTuens U? I know the hard limit is 500Mb per upload, but it seems as though any file that is more than about 10 minutes in length takes upwards of 10 minutes or longer to load. A short video (under 5 minutes) will load immediately. Is iTunes content not really streamed?

    No, it is not streamed. But iTunes U isn't setup to be a streaming service. If you sniff packets (I didn't want to, but our security guy made me because of a local issue ... long story), you'll see that content is grabbed by way-of-an HTTP GET. There is a certain sense to that ... iTunes and iTunes U are, effectively, aggregators of content. You can get iTunes U to stream ... sort of ... but it is not a true streaming service (and, in fairness, it wasn't designed to be).
    There is a trick you can play with encoding ... I don't have my notes with me (someone will remember) ... wherein you can ask that content be encoded to play as quickly as possible ... "instant on". There are a couple of apps, I believe, that help automate the process. It is not the same as streaming, but is helpful in situations in which you want a streaming effect.

  • Lots and Lots of video tracks...

    Hello Ya'all:
    Just reporting some bugs/discoveries I made in FCP 5.0.3, when using storage which is almost infinetesimally fast. I know FCP supports a maximum of 99 video tracks, but I wonder how many have actually been tested (realistically): Here's some problems I have when doing lots and lots of video tracks:
    Qty. Description
    Up to 10 Fine - no problem.
    12 Program intermittently crashes with no error, when
    sitting idle.
    14 The scroll bar on the right side of the video
    portion of the timeline stops drawing properly,
    but the crashing above goes away.
    16 Crashing is back - scroll bar still not operating
    properly.
    20 Crashing stops, but scroll bar still not drawing
    correctly.
    24 Same as above.
    25 Seem to have hit some sort of maximum, as the
    video portion of the timeline header turns red.

    I rant for lots of reasons...as does Jim.
    I rant when someone with NO CLUE as to the post production process tries to tackle a complex process thinking that FCP is easy. Especially when said people, who previously edited home movies or short films on FCP, suddenly think they can edit broadcast television.
    I rant when people think a simple plugin will edit for them, or suddenly make everything ready for broadcast.
    I rant when someone assumes that FCP can do something it cannot, and is mad for FCP not being able to do it.
    I rant when people don't do their research, buy gear, shoot hours and hours, only to find that it won't work on ANY system...and they blame the system for not working with the new gear, even though the gear came out AFTER the system.
    But mainly I rant for the first reason. Too many people think that editing is easy and that they can just buy a G5, monitor, camera and a few books and be ready for Prime Time. No no no. Even Robert Rodriguez, the ultimate film rebel, took a long time to learn what he learned. I have spent a large part of my career learning post production...broadcast standards, specs, color correction, show timing, audio post...not to mention the art of storytelling. And it really gets on my nerves when someone thinks that they can take an Mac Mini and camcorder and edit a broadcast show...and get angry at Apple for things not working properly.
    Get the proper tools. Get the proper training. Cut your chops by editing a lot and a lot and a lot. Research everything before you buy and jump into a project with a huge deadline. I am venturing into HD...I start editing next week...I have been researching the topic since July and am STILL testing gear and my workflow.
    I am sure there are plenty more reasons I rant, but those are the ones off the top of my head. I just have little patience with people who think that editing is easy and instantaneous. It is hard and time consuming, and if I didn't love it to death I wouldn't do it.
    Shane
    "There's no need to fear, UNDERDOG is ranting!"

  • How can you collapse several video tracks into one track?

    Hi, I have a stack of five video tracks that make up an identification placard for a speaker. I need to create motion on this, but don't want to have to do it to every track individually. I believe there is a way to incapsulate all five tracks into one track. Does anyone know the method of doing this?
    Thanks so much, Bob

    Select the tracks and type Option - C, or go to the menu Sequence > Nest Item(s).
    That will nest the tracks in to one clip on your timeline. If you need to make changes in the nest, double click on the nested clip in the timeline and it will re-open the tracks that have been nested.
    MtD

  • How do I get the audio track to stick with the video track?

    Whenever I move or cut the video track I want it's audio track to move or cut with it, how do I get them to stay together so I don't have to do double work?
    This should be an easy one...Let's see who can answer first.....ready, set, GO!

    Sounds like Linked Selection is switched off. Check the button in the upper right of the timeline window. Shift-L will toggle it off and on.

  • ERROR message (iDVD) 'no video tracks selected'  where is 'SHARED'

    (I think everyone's asleep on the iDVD boards, so I've taken the liberties of posting here also, sorry.... ssshhhhhhh....)
    My first time using iDVD (it's 5.0) --
    Exported sequence from fcp as QT.....
    Dropped into into 'drop zone' hit 'burn', and get "no video track defined"
    I searched this forum (iDVD) and it seems I need to tweek "shared" setting.... since I made the sequence in fcp (not iMovie), where is this 'shared' menu?
    Very perplexing...
    Thanks.
    Mark

    Here'w what Ken says from his article detailing iDVD:
    Once you have set all your markers, set an in and out point on your Timeline, File Menu > Export. From FCP 4.5 and FCE 2, select QuickTime Movie (not 'Using QuickTime Conversion').
    There is an option in the Save box, "Make Self contained". If you uncheck this box the movie that is generated will consist of pointers to your media. The export process will happen quickly and the resulting file will be small in size. This is a good choice if you will be using iDVD on the same Mac as your editing application. If you chose to "Make Self contained" the resulting movie will contain all of the media, it will take longer to export and the file size can be quite large, (about 22 gigs for a 100 minute movie). If you will be moving to a different Mac to work on iDVD then you'll need to have your movie be self contained. In either case, leave 'Recompress All Frames' unchecked.

  • Looping a video track with escape -- Bug or Pilot error?

    [The next 2 paragraphs are a repeat of my previous post. I'm including them for context.]
    I'm working in DVDSP 4 and have encountered a few "anomalies". I wanted to see if I am doing something wrong or if I have found a bug. I will break this into two posts because they are two different issues.
    Basically I am creating a DVD that will back a live presentation. The video track is timed to approximate the length of the presentation. But I want to have several "escape hatches". If a segment does run a little long then the presentation will dump into another track that has a still image and a background music track. I don't want to pause the play, because I want full-field video and audio. I also want to advance through the presentation by simply clicking the NEXT CHAPTER button.
    [/End repeated section]
    So the other problem with looping a still on a video track is escaping the loop. I've set this track's END JUMP to go to the "Chapter 1" marker of the current video program. (It's the only marker on the this timeline.) I've targeted the "Next Chapter" button to return me to my main timeline. Whether I simulate OR burn this DVD program I get the same results. The playhead does not jump tracks. Instead it returns to the start of the current timeline and begins playing again.
    Is this supposed to happen? DVDSP lets me assign all these actions, and the manual and support seems to indicate this should work, but it doesn't. Not sure if this is a bug, a problem with the DVD spec, or simply my lack of knowledge. (please help)

    Houghts & Aldershot -- thanks for your reply. To add a little clarity the project goes like this:
    The MAIN track is 20 minutes long. If the speaker finishes a section early, he can "NEXT" to the next section (next marker). If he runs long, when he gets to the next marker the dvd will dump him into another track (Lets call it WAITING TRACK) that will "hold" (with some music) until he hits NEXT again. So far this all works.
    The problem is getting OUT of the WAITING TRACK loop and back to the MAIN track. Putting a second marker near the end of this track (as Aldershot suggests) will jump me to the end of WAITING but how do I get back to the marker in MAIN? Can I just set an end Jump to go back to the marker I want in MAIN? Will the presenter then have to hit skip forward twice? (I guess I'll have to try and see.)
    I guess I could target this marker in main with the MENU button, but then the presenter would have TWO buttons to worry about. I'm trying to make this as zipless as possible.
    By the way, if I don't loop the WAITING track back to the first marker, this scenario works. The problem only arises if I loop back to Chapter1. Making the end of the track an infinite hold looked to be a promising option. But it seems to put the player into pause. The user must hit PLAY and then NEXT. Two buttons again.
    I'll keep digging and follow up as I learn more.

  • Audio and Video tracks don't go up/down together EVEN when linked selection is checked!

    I'm sure this is something really simple but I just can't figure it out. And it must be a button or a option that I've checked because it didn't use to do that a few days ago.
    Basically, I have a clip on the timeline which has a video and an audio track. I want to move the video clip up to the next video track but I want the audio to move down to the next audio track too. Right now it's not doing that. Only the video file moves up to the next track and the audio clip remains in the same track. How do I fix that so that however many tracks I move the video up by the audio goes down by that same number of tracks?

    Hi Shooternz,
    shooternz wrote:
    Not sure how other NLES manage it but I think it would be a pain if audio  automatically followed video in this respect.  eg Blocked layers b'cos something is already there.
    FCP &, and earlier behaved that way. I prefer the way Premiere Pro does it. You often do not need to move the audio to a different track when you move video to another track. I want to control the placement of audio and video separately now.
    Thanks,
    Kevin

  • Brightness differences between Menus and Video Tracks

    I am trying to learn DVD Studio Pro 3.
    My project has a "roster" menu that leads to several submenus. I want an animated transition from the "roster" menu, to each of the submenus.
    I built each of the animations in After Effects. They all start with the same first frame -- the "roster" menu. Each animation has a different ending frame -- one of the submenus. I rendered the animations as QuickTime movies in After Effects.
    Also in After Effects, I used the "Save frame as" menu to make a flat .PSD file of the first frame (for the "roster" menu,) and each end frame (for the submenus.)
    I imported all the files into DVD Studio Pro. I laid out the menu structure, drew buttons, and connected them all the way I wanted. Each button on the "roster" menu points to the start of a track, and the End Jump of that track points to a submenu.
    The logic of all this works the way I expect, both in DVD Studio Pro's simulator, and on a burnt DVD. However, there is a noticeable brightness difference between the video tracks and the menus.
    How can this be, if they are derived from the same graphic source?
      Mac OS X (10.3.9)  

    There could be a ColorSync issue with the PSD. Either take it into Photoshop and try no ColorSync (or a different setting), or take a single frame of the video and make it last a while, and use that as a motion menu.
    I have cured these differences both by changing the ColorSync settings of the PSD, and also by setting the monitor to generic RGB. That was enough to make DVD SP ignore the ColorSync settings in the PSD I was using.

  • Monitors for each video track?

    Is there a way to have seperate Monitor windows for each video track, so as I scrub through a Sequence I can have a preview of what is on each  track all at the same time (without using the Multi Camera editor)

    What I do is find a sync point in the first clip and add a numbered clip marker to that point (for example, a camera flash or a music hit), and then edit it into the sequence. I do the same for the next clip(s), using the same numbered marker, and add those into the sequence. When I've added all the clips, select them all, and go to Clip > Synchronize > Numbered Marker, selecting the numbered marker that is common to all of the files. Once you hit OK, all of the clips will be synced around that point.
    Definitely easier than looking at a four-up display and trying to figure out which one is which, IMO.

  • Is there a way to see the waveform of the audio in the primary video track?

    Is there a way to see the audio waveform of the audio in the video (primary) track?
    Scrubbing to determine precise edit points is useful, but seeing the dialog audio waveform would be much better.
    You can see the audio waveform in additional audio-only tracks, but for cutting to dialog you really need to see the primary audio waveform that's in the video track.
    Any thoughts?

    msimpson,
    No. The waveforms are only visible in the two separate audio tracks.
    A work around would be to use Advanced>Extract Audio command.
    This command, in spite of its name, copies the audio to one of the audio tracks and sets the volume level of the audio to zero in the video track.
    Now you'll have the waveform to use in editing. When you're done with it, you could delete it and raise the volume again on the video track.
    Matt

  • Can't Rename video tracks in Bootcamp

    Hi,
    I'm using Adobe Premiere Pro CS4 on my Macbook Pro on the Windows 7 bootcamped partition. I try to rename my video tracks by right clicking (or control clicking for that matter) but all that happens is they become highlighted or unhighlighted (or nothing if the track is locked). My right click works for other applications as well as other parts of Premiere (renaming the sequence, etc) but not the video tracks. How can I fix this?

    Make sure that you are Rt-clicking ON the Track Name in the Track Header. Otherwise, you will just Target the Track. Depending on your screen rez, you might have to be very exact with cursor placement. It can be rather like finding the vertical zoom handles, between Tracks - a pixel hunt!
    [Edit] Just tried this in PrPro 2.0 (obviously on a PC), and the cursor position was not anywhere near as critical, as I suspected. Anywhere in the Header got me the Rename option. Guess that I always did it right on the Track Name, and made an incorrect assumption. Sorry for that.
    I've not heard of Bootcamp loosing the Renaming capabilities, but have to admit to being a PC-only guy.
    Good luck,
    Hunt

  • Exporting multiple video tracks as 1 file with different effects on each track.

    I am currently trying to export 3 video tracks as 1 mp4.
    Each track has exactly the same footage, but with different effects to achieve a certain aesthetic.
    When I view the sequence it in premiere all 3 tracks are displayed correclty.
    The exported version appears to only export the uppermost track, track 3.
    Track 2 and 3 have opacity set to 47%.
    Track 1 opacity is set to 100%.
    I have tried exporting a test project that has multiple layers and there was no problem.
    I have NOT tried exporting a test project with exactly the same opacities and effects, as it's a bit time consuming. I will do so if I can't get a stisafctory solution from the forums.
    The problem, I believe, is down to the layering of effects. In this case on track 3 I have procamp, which is boosting the red in 1 layer. This is the image I get once the final piece is exported - track 3's.
    So..
    How do I get the effects of each layer to show properly in the export?
    and
    Why is the exported version missing tracks (or the effects of tracks) 1 and 2?

    You didn't answer probably the most important question: whether you're using hardware or software Mercury Playback Engine (MPE). However, since you've set Maximum Render Quality on, it's largely irrelevant.
    When you're using hardware MPE or have the MRQ flag set for your export, rendering is performed with linear color. Linear color processing affects how color channels and alpha channels are composited--anything less than 100% opacity is subject to linear color processing. Check out this article for more information on linear color/linear light: Linear Light - Artbeats
    Since it sounds like you're seeing the results you expect in the Program Monitor, but not export, I'll wager you're not using hardware MPE. Only by disabling the Maximum Render Quality flag on export will you be able to get results that match what you see in the Program Monitor (within reason, of course). The only way you could see the effects of linear color within Premiere would be to either use a qualified GPU that enables hardware MPE, or go into your Sequence Settings and check the "Maximum Render Quality" option and then render previews.
    Please let me know if that helps resolve the issue, or at least provide a little insight into the problem.

Maybe you are looking for