Filling Setup for 2LIS_05_QVUDN

Hi,
My requirement is extract data from 2LIS_05_QVUDN DataSource.
Please give me the steps to do Setup in R/3 for the above DataSource.
And also let me know the Dou2019s and Don'ts while running set up for 2LIS_05_QVUDN.
Regards,
Sreddy

Hello ,
You need to check one at a time and fill the setup table, then check second one and fill the setup table and then the third one should be checked and fill the setup table.
After every setup table filling you can go to RSA3 and then put 2LIS_05* and select one by one each data sources ...the data source which gives records is related to that event.
If you check all and fill the setup table data will be wrong.
Regards ,
Amol K.

Similar Messages

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • How to stop document posting when filling setup tables for logistic app.

    Hello Boys
    I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP,  are running?
    So I have some questions
    1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
    3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
    4) Every logistic applications has a different procedure??
    thanks (with points of course) for any help
    rgds
    A. Garduñ

    Hi Azael:
    Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
    2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
    3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
    hope it helps.
    assign points if helpful
    kalyan

  • How to Fill Setup tables for MAP (IS- Retail)

    Hello,
    I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
    2LIS_40_REVAL
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208
    Your reply is highly appreciated.
    Regards,
    Naresh

    Hi Naresh,
    We cannot fill setup tables for each data source.
    ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
    If you want setup tables names of your data sources please check below.
    2LIS_40_REVAL      ---   MC40RP0REVSETUP.
    Comes to your second post.
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208   these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
    If you are using LO data sources then no need to use LIS data sources.
    Regards,
    Venkatesh

  • How to fill setup table for Application 18 Customer services

    Hi,
    How can I fill setup table for application 18.
    Regards,
    ST

    Hi,
    To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
    SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
    Also pls chk this;
    Re: query on setup table filling
    Regards
    CSM Reddy

  • Trying to fill setup table for 2LIS_04_P_ARBPL

    Hi
    I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
    Am I missing a step?
    Thanks
    Pooja

    I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
    Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
    I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
    Then I got the message - datasource still contains data to be transferred.
    Thanks!

  • Tcode to fill setup tables for application 0CS( Customer Service)

    Dear Experts,
    i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
    the datasource comes under the appilcation 0CS( Customer Service).
    when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
    Could you please let me know the transaction to fulfill the same.
    Regards,
    Sunil...

    Hi SunilKumar Bolle,
    For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
    The only way to say thanks in SDN is to assign Points.

  • Filling setup tables for 2lis_03_um

    hi
    i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
    its asking Archiving Run  . i am trying to give or f4 its not allowing me?
    please let me know

    Hi Suneel........
    Check this thread by Roberto Negro......
    Archive run.
    Hope this helps.....
    Regards,
    Debjani.....

  • Tcode for filling setup tables

    Hi experts,
    What is the tcode for filling setup tables of 2lis_06_inv ?
    Full points will be assigned.
    Regards,
    Bhadri M.

    Hi,
    Filling up the set up tables depends on the datasource.
    there are different T-codes for the respective extract structures
    OLIIBW transaction PM data
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    OLI7BW is the tcode for Sales Order.
    Have a look at these discussions:
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    Blogs of Roberto will be useful as well:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
    LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
    LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
    LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
    Display Setup Table Data:-
    Goto SE11 or SE16 -> MC*SETUP -> F4 you will get all the setup tables choose and display the data
    To check completion of dta loading
    NPRT t-code... Where u can see the entry with ur user and the Run of ur setup..
    Regards
    Tg

  • Entry Channel setup for multiple company codes

    Hello,
    I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
    In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
    Now, what should I do in the following scenario?:
    1. SRM is only connected to one backend system
    2. There are 50 company codes
    Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
    I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
    Any help would be greatly appreciated.
    Regards,
    Gilberto.

    Hi Proyecto Genesis,
    I am also configuring the Entry channel (org unit) for multiple company codes.
    I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
    Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
    However the system fails to transfer the external requisition to SRM.
    SLG1 displays following error message.
    "No address found for partner function type Ship-To Address"
    So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
    But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
    Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
    Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
    Please guide.
    Regards,
    Sandeep

  • What do exactly mean by 'document is lost' while filling setup table

    Hi ,
    In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table.  So my questions are as follows :
    1)What exactly do u mean by 'Document is Lost'?  (I mean the document entries,will always be there in application tables ).
    2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table?  (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
    Please let me know your opinion on above questions
    Regards
    Mohit
    Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

    Hi Mohit,
    1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
      Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
    All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
    2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
    Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
    Hope it clears your doubts.
    Thanks.

  • Order is locked by user while filling setup table

    Hi Experts,
    Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled.
    It showed that " Order xxxxxx is locked by user".
    Because we have DSO concept in our CUBE, we didn't lock users.
    But then the basis checked the users and removed from the system.
    But still after removing the users, when we do the setup filling it still gets cancelled showing the same error.
    Please help on this. Now i am stuck in filling setup section.
    Thanks,
    Thilini

    Hi,
    Thanks. I followed your instructions and removed * , last two check boxes and selected sales org.
    Now i am filling setup and its still running. I used a background job.
    In sm37 it shows as "active"
    But when I check in NPRT, It shows no logs were found.
    I want to know that, is everything fine?
    Setup table is filling right?
    expects a reply please...
    Thanks,
    Thilini

  • Timeout error while filling setup tables

    HI all
    I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
    Going through threads i have come to know that to solve this issue
    1.BASIS team have to increase backgroung processses or memory
    2.run it as a background job.
    When I went to Program->Executein the backgroundPrint background parameters window has popped up.
    What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
    Please let me know.
    Thanks,
    Harika.

    thanks for the reply.
    it was set to LOCL only.
    But i have 3 options in the dropdown  windowsprinter :Send to onenote2007
                                      Microsoft XPS document writer
                                      OUrprinteraddress
    WHich one to choose here?
    Edited by: harikag on Aug 10, 2011 8:47 AM

Maybe you are looking for