Filling subnodes in webdynpro for abap

I have a table with cardinaity of 0.n and a subnode with cardinality of 0.n. I am having trouble filling the subnode. When binding the data to the sub node I am getting an error u2018Access via 'NULL' object reference not possible.u2019 After method path_get_node lo_nd_funds is still initial.   What do I need to do?
My code:
DATA lo_nd_funds TYPE REF TO if_wd_context_node.
data ls_funds type table of z_fundtable.
navigate from <CONTEXT> to <FUNDS2> via lead selection
lo_nd_funds = wd_context->PATH_GET_NODE( path = 'TABLE.FUNDS' ).
data: node_path type string.
data: node_index type STRING.
loop at lt_repeat_table into ls_repeat_table.
    NODE_INDEX = SY-TABIX.
    concatenate ' DETAIL_TABLE.' NODE_INDEX '.FUNDS' INTO NODE_PATH.
    lo_nd_funds = wd_context->path_get_node( path = node_path ).
    append ls_repeat_table-FUNDS to lS_funds.
    LO_ND_FUNDS->BIND_TABLE( LS_FUNDS ).
endloop.
Thanks
Cindy

hi,Cindy
You know, when you want insert data into subnode, you should first insert data into its parent node if the parent node is initial.
So, according to your code, i think the parent Node " DETAIL_TABLE" should be inserted with data first.Otherwise you will get "Null Object " expcetion.
data: node_path type string.
data: node_index type STRING.
loop at lt_repeat_table into ls_repeat_table.
NODE_INDEX = SY-TABIX.
concatenate ' DETAIL_TABLE.' NODE_INDEX '.FUNDS' INTO NODE_PATH.
lo_nd_funds = wd_context->path_get_node( path = node_path ).
append ls_repeat_table-FUNDS to lS_funds.
LO_ND_FUNDS->BIND_TABLE( LS_FUNDS ).
endloop.
In addition, here, the cardinality is not very "Important". Why? though the subnode's cardinality is '0...n', however, in the static context node, you can see that "Subnode" must have one "Parent Node".
I don't know whether it can help or not.
Best wishes.

Similar Messages

In webdynpro for ABAP alv table issue

hello gurus,
                  i am new for webdynpro for ABAP.i strucked at one point at designing time.anybody could you suggest me on this.
thanks in advance.
let me explain my scenario first.
in my webdynpro for ABAP developement i have one alv table having ten fields.i am featching the data for eight fields from one Ztabale and updating , for rest of two fields we need to fill after displaying output using the respective F4 help. Right now these two fields are in input editable mode.now i am getting the values successfully from F4 help and at the same time it is allowing MANUAL ENTRIES also but as per my requirement it should not allow any manual entries . for this i have made these two fields are in readonly mode as like as rest of fields to avoid the MANUAL ENTRIES but at this time i didnot get any F4 helpfor those two fields.
so how can i achive my goal in this thing could any one suggest me.
my final conclusion is we need to get only F4 help values into those two fields . it should not allow any manual values at any point of time.
best regards,
babu

ya hi harshit,
      my self also used same code in my action part . here i have one table with four fields carrid , connid , fldate , price.
for carrid i have created freely programmed search help.but if it is in display mode there is no F4 help in enable mode.
in context for attribute carrid
DATA lo_nd_flight TYPE REF TO if_wd_context_node.
DATA lo_el_flight TYPE REF TO if_wd_context_element.
DATA ls_flight TYPE wd_this->element_flight.
DATA lt_flight TYPE wd_this->elements_flight.
navigate from <CONTEXT> to <FLIGHT> via lead selection
lo_nd_flight = wd_context->get_child_node( name = wd_this->wdctx_flight ).
select connid fldate price from sflight into CORRESPONDING FIELDS OF TABLE
    lt_flight UP TO 20 ROWS.
@TODO handle non existant child
IF lo_nd_flight IS INITIAL.
ENDIF.
get element via lead selection
lo_el_flight = lo_nd_flight->get_element( ).
alternative access via index
lo_el_flight = lo_nd_flight->get_element( index = 1 ).
@TODO handle not set lead selection
IF lo_el_flight IS INITIAL.
ENDIF.
get all declared attributes
lo_el_flight->get_static_attributes(
   IMPORTING
     static_attributes = ls_flight ).
CALL METHOD lo_nd_flight->bind_table
EXPORTING
    new_items            = lt_flight
   set_initial_elements = ABAP_TRUE
   index                =
DATA: lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA: lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    instantiate ALV component usage if necessary
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
    pass reference to data node to instance of ALV usage
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( r_node_data = lo_nd_flight ).
Configure ALV
DATA lr_config TYPE REF TO cl_salv_wd_config_table.
lr_config = lo_interfacecontroller->get_model( ).
**declerations
DATA: lt_columns TYPE salv_wd_t_column_ref,
        ls_columns TYPE salv_wd_s_column_ref,
        lr_input TYPE REF TO cl_salv_wd_uie_input_field,
        name TYPE string,
        lt_node_info TYPE wdr_context_attr_info_map,
        ls_node_info TYPE wdr_context_attribute_info,
        lv_tabix TYPE sy-tabix,
        lr_info TYPE REF TO if_wd_context_node_info.
TYPES: BEGIN OF ty_name,
          name TYPE string,
         END OF ty_name.
DATA: lt_name TYPE TABLE OF ty_name,
        ls_name TYPE ty_name.
**for getting node info
*Get the context node information
lr_info = lo_nd_flight->get_node_info( ).
lt_node_info = lr_info->get_attributes( ).
LOOP AT lt_node_info INTO ls_node_info.
    CASE ls_node_info-name.
      WHEN 'CARRID'.
        ls_name-name = ls_node_info-name.
        APPEND ls_name TO lt_name.
     WHEN 'REGIONALOFFICER'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
     WHEN 'INSPECTORNAME'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
    ENDCASE.
ENDLOOP.
*Logic for Table Horizontal Scrolling
lr_config->if_salv_wd_table_settings~set_visible_row_count( 13 ).
" lr_config->if_salv_wd_table_settings~set_width( '1085' ).
lr_config->if_salv_wd_table_settings~set_width( '100%' ).
lr_config->if_salv_wd_table_settings~set_scrollable_col_count( 8 ).
" lr_config->if_salv_wd_table_settings~set_fixed_table_layout( abap_true ).
lr_config->if_salv_wd_table_settings~set_first_visible_scroll_col( 'CARRID' ).
lr_config->if_salv_wd_table_settings~set_cell_action_event_enabled( abap_true ).
Set the table editable .
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
lr_table_settings->set_read_only( abap_true ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_column TYPE REF TO cl_salv_wd_column.
DATA: lt_string TYPE STANDARD TABLE OF string,
        ld_string TYPE string,
        ld_int TYPE i,
        lv_index TYPE i.
Make few columns editable and attach inputfield, if permitted.
    DATA lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
    CLEAR lt_string.
    APPEND 'CARRID' TO lt_string.
    LOOP AT lt_string INTO ld_string.
      lr_column_settings ?= lr_config.
      lr_column = lr_column_settings->get_column( ld_string ).
      CREATE OBJECT lr_input_field
        EXPORTING
          value_fieldname = ld_string.
      lr_input_field->set_read_only( abap_true ).
      lr_column->set_cell_editor( lr_input_field ).
    ENDLOOP.
    CLEAR lt_string.

How to send a mail in webdynpro for abap

Hi experts,
Am working on webdynpro for abap. My requirement is to send a mail to end-user, he 'l fill that form and send it to me back. once I received that mail I 've to convert that pdf into xml and 've to parse that xml file and pass those values to bapi (everything in webdynpro). how can i proceed, its urgent to me. I dont want exact answer jst some inputs to proceed will help to me thank you.

I think it's easier to accomplish with workflow.
You can send workitems and receive them. Search sap help for functionality on offline approval, you can use a lot of the functionality of that one.
Regard, Rob Dielemans

Uploading PDF into webdynpro for ABAP

Hello,
I have a small Webdynpro for ABAP with an Interactive Form. I can fill my fields in this form. Now I downloaded the PDF to my local drive, changed the fields and tried to upload it again. Thats where my problem is:
I cant upload my changes. I used a File_upload UI Element which is binded to a attribute FORM.FILE type xstring. This attribut I binded to the Interactive_Form element field pdfsources. I implemented a button with an action for my server roundtrip.
I thought thats it but unfortunetly not. Can anybody tell me what I am missing.
Thanks in advance.
regards
stefan

Hi Stefan
Web Dynpro ABAP development recommends that you create a <a href="http://service.sap.com/message">customer message</a> on component BC-WD-ABA.
Best regards,
Markus Meisl

Interactive Forms by WebDynpro for ABAP

Hello,
I'd like to create Adobe Interactive Forms by "WebDynpro for ABAP".
Our business requirements are
- to download offline PDF forms.
- to upload PDF forms and display Forms online.
Please let me know how to do this and the document or blogs.
Best regards,
Koji

Hi,
Downloading a form is as simple as when u enduser opens a form online, he just saves a copy of it, fills it up and uploading is just the next step.
If u want to upload an offline PDF form:
Here's the link that'll give a fair idea about this:
/people/shruti.rathour/blog/2008/02/07/uploading-sap-interactive-form-on-the-abap-webdynpro-view
If still not clear ask me..
It's just that u've created a view in webdynpro ABAP and uploading an offline form from that.
regards
Amita

Send Email with Webdynpro for Abap

Hi,
i want to send an email without a attachment after the customer has filled a form.
The Webdynpro for Abap action must send a notification Email to the
service department about these new request.
Has anyone an example how to send an email with Webdynpro for Abap.
Thanks
Thomas

Hi Micky,
thanks for your help. I trying to used the SO_NEW_DOCUMENT_SEND_API1 in
a action of my webdynpro for Abap. But I getting the error message that a structure parameter responce an error.
Here the Code of the Action:
DATA HEADER TYPE TABLE OF STRING.
DATA RECEIVERS TYPE STRING.
RECEIVERS = 'my-mailadress'.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
    DOCUMENT_DATA          = 'nothing'.
DOCUMENT_TYPE          = 'RAW'
PUT_IN_OUTBOX             = ' '
COMMIT_WORK              = ' '
IMPORTING
SENT_TO_ALL                 =
NEW_OBJECT_ID            =
TABLES
    OBJECT_HEADER           = HEADER.
OBJECT_CONTENT         =
CONTENTS_HEX             =
OBJECT_PARA               =
OBJECT_PARB               =
    RECEIVERS                    = RECEIVERS.
EXCEPTIONS
TOO_MANY_RECEIVERS                     = 1
DOCUMENT_NOT_SENT                       = 2
DOCUMENT_TYPE_NOT_EXIST            = 3
OPERATION_NO_AUTHORIZATION       = 4
PARAMETER_ERROR                          = 5
X_ERROR                                            = 6
ENQUEUE_ERROR                              = 7
OTHERS                                              = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
What's wrong ?
Thanks for your help.
Thomas

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

How to create an editable table in webdynpro for ABAP? Help!

Hi Experts,
I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
how can I achieve this? Is there any such feature in ALV component?
Any code sample will be really helpfull.
Please help!
Thanks
Gopal

Hi,
yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
Regards, Heidi
PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
Message was edited by: Heidi von Geisau

Excel File Upload In Webdynpro For ABAP

Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.

Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
              name(10) TYPE c,
              age(10) TYPE c,
             END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
       i_data TYPE STANDARD TABLE OF string,
               lo_nd_sflight TYPE REF TO if_wd_context_node,
                lo_el_sflight TYPE REF TO if_wd_context_element,
                l_string TYPE string,
        fs_table TYPE str_itab,
                l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
                          IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R

Display HTML code in WebDynpro for ABAP

Hi, I would like to display a html page in a WebDynpro View, ie: I have the html code in a "string" variable and would now display this string now not with the html tags visible, but as a "real" html page.
I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
Thanks

>I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
I'm a little bit confused by this statement. Do you mean you found a thread in Web Dynpro Java, perhaps?
Regardless the approach is possible using the iFrame UI. The warning about the iFrame is that it is deprecated in NetWeaver 7.0 and 7.01 and my not be usable depending upon your support package level. However in NetWeaver 7.02 the iFrame returns to fully supported status.
If you have the HTML content in a string, you can simply place it into the ICM cache. This will provide a temporary URL for the content (you supply the lifetime of the URL) that can be referenced via the iFrame URL or even the LinkToURL if you want to open in a new window.
Here is the code for placing the string into the ICM Cache:
****Create the cached response object that we will insert our content into
data: cached_response type ref to if_http_response.
create object cached_response
    type
      cl_http_response
    exporting
      add_c_msg        = 1.
try. " ignore, if compression can not be switched on
      call method cached_response->set_compression
        exporting
          options = cached_response->co_compress_based_on_mime_type
        exceptions
          others = 1.
    catch cx_root.
endtry.
****set the data and the headers
data: l_app_type type string.
      cached_response->set_cdata( lv_html_text ).
      l_app_type = 'text/html'.
cached_response->set_header_field( name = if_http_header_fields=>content_type
                                     value = l_app_type ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 60 ).
data: guid type guid_32.
call function 'GUID_CREATE'
    importing
      ev_guid_32 = guid.
concatenate '/sap/public' '/' guid '.' 'html' into lv_iframe_url.
****Cache the URL
cl_http_server=>server_cache_upload( url      = lv_iframe_url
                                       response = cached_response ).
wd_context->get_element( )->set_attribute(
    name = `IFRAME_URL`
    value = lv_iframe_url ).

Article: Screen Conversion in WebDynpro for ABAP

Hi all,
       I want to share with you my first article that i posted in SDN. Looking for your valuable comments...
Click the below link to read by article. Thanks.
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/screen%20conversion%20in%20web%20dynpro%20abap.pdf">Screen Conversion in WebDynpro for ABAP</a>
Some of the links in the article are not accessable from the article. The links are given below.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712">Getting Started with Web Dynpro for ABAP</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/content.htm">Wizard</a>
[url=http://help.sap.com/saphelp_erp2005/helpdata/en/73/e5e6418b7eca17e10000000a155106/content.htm]Restrictions[/url]

HI Hema,
What i understood from u r query is u want 2 refrsh all ui elements data.
u can read data from the respective nodes and clear those data.
Example: I want to delete contents of an ui element on the screen( FULL_NAME ).
create a buuton REFRESH on the screen and assicn a action to that button.u wil get a method with that action.write this follwing code in tat method.
method ONACTIONREFRESH_UI .
    DATA lo_nd_processedby TYPE REF TO if_wd_context_node.
    DATA lo_el_processedby TYPE REF TO if_wd_context_element.
    DATA ls_processedby TYPE wd_this->element_processedby.
    DATA lv_full_name LIKE ls_processedby-full_name.
navigate from <CONTEXT> to <PROCESSEDBY> via lead selection
    lo_nd_processedby = wd_context->get_child_node( name = wd_this->wdctx_processedby ).
get element via lead selection
    lo_el_processedby = lo_nd_processedby->get_element( ).
get single attribute
    lo_el_processedby->get_attribute(
      EXPORTING
        name = `FULL_NAME`
      IMPORTING
        value = lv_full_name ).
clear lv_full_name.
CALL METHOD lo_el_processedby->set_attribute
EXPORTING
    value = lv_full_name
    name   = `FULL_NAME`
endmethod.
reward if it is use ful

Dynamic form in Webdynpro for ABAP - Context Cardinality question

Hello -
I have an adobe form in a webdynpro for ABAP application which I want to be able to be dynamic. Basically I want to be able to use a Webdynpro context node with a cardinality of 1-N and the form will take each node of the context and create a page for each one. I am able to do a static form with a context node that has a 1-1 cardinality, but once I change my cardinality to 1-N on the node the static form no longer works (there is no data). Is what I want to do possible? I've looked through all the documentation I could find and could not get a definite answer. Any help would be appreciated.
Widget (1-N)
     -Widget_info (1-1)
          *Name
          *Sku
          *Description
     -Widget_plant (1-M)
          *Plant_Code
          *Plant_State
          *Plant_City
     -Widget_pic (1-1)
          *Picture
... So I want to have a form which can print a page for each widget in the context (the number of which can vary). That form would have the Name, sku, description, plant_code, plant_state, plant city and the picture on it. (This is just a generic example of what I need to do)
Regards,
- Jason

Ok, I think I found a bug... It seems for adobe forms in WD4A, the root context node must be 1-1 and you must nest the 1-n node within that... Not sure why, but it worked. So in my case my context would look like this:
FOO_NODE (1-1)
     Widget (1-N)
          -Widget_info (1-1)
               *Name
               *Sku
               *Description
          -Widget_plant (1-M)
               *Plant_Code
               *Plant_State
               *Plant_City
          -Widget_pic (1-1)
               *Picture

Filling subnodes in webdynpro for abap

Similar Messages

Maybe you are looking for