Film in 4k to use on 1080p sequence. Can't use warp stabilizer.

Hi all,
So, I've been filming using 4k resolution with the intention of using it on a 1080p sequence. The reason I use 4k is so I have the extra pixels to play with when I use the Warp Stabilizer. BUT, it seems this is not possible to do, as Premiere Pro CC says I need to 'nest' the 4k clips before I can use warp stabilizer. The problem with that is that, 'nesting' a 4k clip to match the 1080p sequence video dimensions, means the 4k video gets cropped to 1080p, thus loosing the extra pixels I had and making it completely pointless filming in 4k in the first place.
It's my understanding that a lot of people use a higher resolution than sometimes needed when filming, so they can crop / stabilize the footage without loosing the quality...but how are they doing this?
Any help with this is greatly received
Thanks,
Paul

After you put the 4k video on your timeline and you "crop" it (size it) the way you want it to be seen in the 1080p frame... then export the video using "match sequence settings"... this will give you a 1080p file... put this on your timeline and then you can use Warp Stabilizer!

Similar Messages

I have 8mm films transferred to .avi files at 18fps. Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

I have 8mm films transferred to .avi files at 18fps. Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

Hi
I was hoping that FCE would be able to handle the coversion from 18 to 30fps but that appears not to be the case.
It does - If I'm not totally wrong. Can be to much using FinalCut Pro (6)
Start FCE
Select type of project You want to do
I guess - NTSC 29.97fps - Select that from FCE menu / Easy Set-up
Start a new Sequence
DROP A PHOTO in TimeLine - at beginning.
Now project is locked to 29.97 fps
Now import and drop the 18fps clip in TimeLine.
Select to convert it to match the setting of TimeLine.
IF THIS IS A GOOD WAY - I hesitate to say - It works - but if quality is OK or not - I don't know
I DO : use JES_Deinterlacer (free from Internet) to convert the frame rate in my clips (usually 25fps) to 29.97 fps - Then and first then I import the converted clip into FinalCut to be used in my NTSC projects.
The quality done in this way - is very good and the program is free - so I can not want any better.
Yours Bengt W

Kisight:- If I Don't Have or Want to Use My iSight What Can I Use ?

kisight:- If I Don't Have or Want to Use My iSight What Can I Use ?
Or What Cameras are available for Macs ?
This question used to come up for Macs that did not have Internal Cameras and the User did not have an External iSight.
Since the advent of Intel Mac and the Internal iSight and OS 10.4.9 (late Tiger) the question has broadened from "What can I use with iChat ?" to "What cameras can I use with My Mac ?" and from there into the current Question this User Tip plans to answer.
On the whole it is a case of matching a camera for the type of application you are going to use it most with.
A web cam can be used in iMovie to create Email or Video Blogs although Camcorders do a better job. Camcorders can be used as web cams.
Camera Types
These fall into three main categories that themselves have subsets.
Your choice is going to be influenced by the Applications you want to use it with.
1) Firewire Cameras (Plug an Play)
a) The iSight (External) made by Apple and several other similar cameras have mostly disappeared off the market. (Although iSights seem to be still doing well on Ebay - See Version and Mounts).
b) Firewire Camcorders. These vary as to which apps that work with dues to the different Signal outputs they can do.
Apple Article TA26556 Highlights some that have issues due to their proprietary DV Format.
2) USB 1.1 able Cameras. (Not Plug and Play)
This includes most cameras pre Vista (more on that later)
Most of these will need a suitable Mac Driver either from the Manufacturer or from one of two Generic sources (macam and IOXeperts). Some manufacturers will include a Mac Driver on the CD that comes with the camera some will supply it as a download from their Site.
It is worth while saying at this point that iChat will also need this reasonably cheap iUSBCam Utility as well.
This Utility was originally designed for getting the External iSight to work on computers less than the G3/600Mghz spec for iChat. Then it included the ability to get USB cameras to work with iChat.
You will need one of these three options listed so far if you are OS 10.4.8 or below or have only USB 1.1 ports/sockets on your Mac.
3) USB 2.0 Cameras. (Plug and Play in most cases)
a) Those that are UVC (USB Video Class) Compliant (Also listed as Vista Certified)
Apple added a UVC driver to the OS at 10.4.9 but your Mac also has to have an USB 2.0 port that you can plug such a camera into (Some keyboard ports are not USB 2.0). This means that the camera is Plug and Play although it may not have all the features it has on a PC
b) Those that are USB 2.0 but are not Vista Certified/UVC compliant. (You are going to need Mac Drivers again)
This site about Apple Compatible cameras may be of some help.
A Note on quality of Pictures.
Firewire cameras of either sort are best with Camcorders being the best of all. (Generally more pixels delivered faster to your Computer)
The Newer USB 2.0 cameras are tending to exceed the 640 X 480 pixels that earlier USB1.1 cameras use with some currently giving 1.3Mp resolutions. It should be noted though that not all applications will use this format.
Look closely at the maximum Frame rate (fps) a camera can produce. You may not get it is every applications but something that starts with a max of 15fps is going to give you no leeway.
Applications
You may get some more insight into what to go for by asking in one of these forums:-
iSight Discussions,
iChat AV Discussions for iChat 3 and iChat 2 and Earlier,
iChat and iChat Sharing (in Leopard)
and iMovie Discussions
Please Note:- some of these are Category Links and you have to select a forum within the list at the top of the linked page.
<hr>
Versions and Mounts Which Version Am I Buying ?
First off I will not say so much on Buying a second hand External iSight other than making sure you use a reputable Selling site or an Individual Seller so that you have recourse if the device turns out to be faulty. Try and get to see the camera working if you can, preferably seeing it plugged in and working or by iChat and seeing the Pic it produces (Get the person to show you live Screen shots (or Screen Share in Leopard/iChat 4) of System Preferences > Sound > Input as the iSight will be listed)
What I will list here is info about the different versions.
There were three versions before the External iSight was discontinued. There is little outward differences as the main change is the mounts that are included with each version. They all function the same way.
The versions are distinguished by letters (Revision A, B or C) in addition to the base part number and an added slash (M8817LL/).The Last model included different mounts for Laptops, Desktop Stand, Magnetic mount and one for a Flat Panel iMac (the Lampshade one). See pictures in this PDF on page 6.
Apple no Longer sell the External iSight or the Apple M9314G/B iSight Accessory Kit either but you may find it at other places as well if the mount you want/need does not come with the camera. Pics of Box and Contents
It appears that individual iSight mounts and other items can be purchased though this iSight Service FAQ page
Remember the youngest External iSight is likely to be at least 4 years old. Current anecdotal information suggests the cost of an Apple Repair to a faulty External iSight exceeds the cost of a USB Replacement (Or the value in real terms, of the camera itself - although higher prices seem to be quoted on Ebay and Amazon)
First Draft
10:08 PM Sunday; May 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Thanks Nubz
I will review further an correct myself.
The last reads the way I meant as in physically getting to see it.
I am not sure you are reading it the same way.
As a consequence your suggestion seems a bit ambiguous to my mind.
Thanks for the input. I will read a digest context a bit more and see if I can rephrase.
8:12 PM Thursday; May 21, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS forom the pc to the apple product i will not use the pc after can i use the OS off

I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
So you may not need to install Windows at all.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Do you need Final cut in order to use Motion 5 or can I use iMovie?, Do you need Final cut in order to use Motion 5 or can I use iMovie?

Do you need Final cut in order to use Motion 5 or can I use iMovie?, Do you need Final cut in order to use Motion 5 or can I use iMovie?

i think you confused us with the question 4 times!?
you can use Motion aas a stand alone app, which can output quicktimes to any codec you want, which can then be used in any app that accepts these codecs. But you wont be able to (AFAIK) import a motion project into iMovie and use it as a clip like you can in fcpx
hth
adam

HT2101 I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

Did you tap in the box at the bottom of iMessage?
If you did and no keyboard is showing: Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If that didn't helped, double tap Home button, delete the Message app and reset again.

Can I use my I mac with a 220 volt outlet with out using a transformer?, can I use my I mac with a 220 volt outlet with out using a transformer?

can I use my I mac with a 220 volt outlet with out using a transformer?, can I use my I mac with a 220 volt outlet with out using a transformer?

No transformer necessary, you only need a plug adapter. Look at the power specifications on your computer and you will see it's good from 100V to 240V.

Using SOA with OBIEE -- Can i use ECLIPSE or do i need JDeveloper?

Hello - I want to use SOA with OBIEE -- Can i use eclipse or do i need JDeveloper?
Any help is appreciated.
Thanks,

You can of course use either eclipse or Jdevelopper.
What you need is to consume the web service file (WSDL). You can also use the package UTL_HTTP or any language you work with.
For JDevelopper :
http://oraclebizint.wordpress.com/2007/07/31/customizing-obi-ee-soap-api/
For Eclipse :
With Eclipse, you have to install WTP and then you can create the library.
http://www.eclipse.org/webtools/
Re: Problems calling the OBIEE webservices
See at the end of the post.
What is your favourite ide ?

When i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

when i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?

Hi Zannat,
Don't get scared. Cookies are the small file which stores your settings for a website, such as location details, login details, language details and so..
Some sites don't care about your cookies settings but some other sites instructs you to enable cookies in your browser. Enabling cookies is too easy.
Just follow the instructions which explained [[Enable and disable cookies that websites use to track your preferences |here]] .
Thank you!!!

I have ipad2 it using wifi 3g how can i use my iphone4 network to browse on it please some one help

i have ipad2 that have wifi+3g , and i want to use my iphone 4 net work to use the ipad wifi please how can i download it so that i can use the iphone 4 network on the ipad

You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
You can read about how it works here.
iOS: Understanding Personal Hotspot - Support - Apple

How to use lastlogontimestamp so it can be used in sets

I'm looking at a way to put users in certain sets based on the lastlogonTimestamp. What is the best way to do this? I create a "lastlogonTimestamp" attribute in MV and can use it to sync that value from AD into the user's details in FIM's
metaverse.
How can I use that to add a user to a specific set e.g. a set with users who have not logged on for 30 days or more??

On Wed, 3 Dec 2014 04:22:33 +0000, JOTdude wrote:
I'm looking at a way to put users in certain sets based on the lastlogonTimestamp. What is the best way to do this? I create a "lastlogonTimestamp" attribute in MV and can use it to sync that value from AD into the user's details in
FIM's metaverse. How can I use that to add a user to a specific set e.g. a set with users who have not logged on for 30 days or more??
IMO far too many people rely on lastLogonTimestamp without really
understanding how it works. For example, I could update an account's
lastLogonTimestamp even if that account has never actually been used to
logon.
Some required reading before you rely on this attribute to be as accurate
as you think it might be:
http://blogs.technet.com/b/askpfeplat/archive/2014/04/14/how-lastlogontimestamp-is-updated-with-kerberos-s4u2self.aspx
Paul Adare - FIM CM MVP
And God spoke: There shall be packets.
And there were packets, and these packets were good, mostly. -- G.S.
Granados

How to insert delay without using loops, and how can I use variable to store data in labview

Hi all,
I am new to Labview and I realized that quite often I am in condition to require a delay beween two functions or elements.. how can we insert a delay in such cases?
I know how to use delays in a loop. but don't know how to inser some time delay between two elements.
I have one more question, I know its a bad practice to post 2 questions in 1 thread.
How can I use a temporary variable to store data, So far I am storing it in an indicator by making it invisible in front panel and making local variable of that indicator, is it the right way to do it ?
Thanks in advance.

Generally, LV doesn't have variables in the same sense that most languages do. You can use indicators to perform the same function as variables, but as Adnan pointed out, you run the risk of having race condition and it creates data copies, which is a problem if you have a lot of data. In most cases, you should use wires to perform the function of variables, which is to store data and make it available to the different functions in your code. Instead of thinking about variables, you need to think about data (something like "I have the data coming out of this function. Where does it need to go?").
Try to take over the world!

ABAP interfaces build using BDC and BAPIs can be used/replaced with the XI?

Hi,
We have develeloped our interfases using BDC and BAPIs. Now our client has decited to implement XI. Now could you please help in finding whether these interfaces can be used/replaced with the XI.
If yes, please let us know how?
Thanks and Regards,
Shweta

Singh,
Check this threads where they have discussed on how to use them with XI:
import BAPI into XI
Re: interface of xi with bapi
Re: BDC
Regards,
---Satish

Can i use whatsApp in IPod, Can i use whatsApp in IPod

I Want to Know how can i use whatsapp in I pod Touch

Sorry, but you can't. The developer changed the app quite a while ago so that it now only works on the iPhone.
Regards.

Film in 4k to use on 1080p sequence. Can't use warp stabilizer.

Similar Messages

Maybe you are looking for