Film Trailer for Website, exporting question!!!!
Hello.
I am new to conversion/compression from FCP. This may be a question for the Compressor forum but it takes forever to get a response there. I think my question will be simple for some of you.
I have a film trailer 1 min 50 sec in length. [Shot on Panasonic DVC30/29.97 frames] I need to put it on the film's website.
The main problem is this: I sent the trailer sequence to Quicktime Movies and Quicktime Conversion. I then choose the best out of the two. The quicktime movie (52 MB) played fine on my computer but I got responses saying that a lot of people could not play it on the website because of the current format. Maybe some of you might want to try it: www.inthelandofsmiles.com, go to Film Trailer page.
I attempted to use Compression and selected the MPEG-4 (highband connection). It came out blurry and distorted looking.
How do I convert my sequence for my website ???????????
Thanks.
There are two issues.
If you are using h.264 to encode, which did originally, then the PCs have to have QT 7 installed. If they don't they can't read the file.
Without QT installed, you can't view the movie on a PC if it is a QT movie.
So if that is what you want to encode to, then you have to provide a link to installed QT for the PCs that don't have it.
Similar Messages
-
I am going to place a 30 minutes dvd film on a website for one of my clients. The film was shot 15 years ago and is in vhs-format. Before I will have the film converted into a dvd-format I want to know what format will suit my needs best. HTTP, Flash, Quicktime or something else? I will make it easy for myself placering the dvd film on the site and for the vistors who wish to look att the film.
The DVD format (MPEG-2) isn't appropriate for Web use.
Use QuickTime and H.264 video codec with AAC audio. Size the file at 320X240 (best fit for your old file). -
Exporting for Website Development in Dreamweaver
I am having some problems exporting my website layout that I created in Fireworks CS4 for development in dreamweaver. I read all of the adobe tutorials on slicing and exporting but I think the problem is that I have something set up wrong with the pages, the vertical navigation menu and the rollover effects of the vertical nav. menu.
Here is a quick overview of my site layout followed by the problem that I am having:
1. Transparent background
2. Master page + 12 other pages
3. Rectangular header, body, footer and right side panel.
4. For the left side panels I have 2 mis-shaped objects that I designed in Fireworks. (this is the area of the export problems). On top of the mis-shaped panels on the left side of the page are rectangles which have text on top of them. I have the rectangles and text functioning as navigation buttons with rollover effects. When I test them the rollover effect displays correctly and when I click them it takes me to the correct page that they are linked to. The problem is when I export the mis-shaped side panels and the nav buttons with their rollover effect. No matter how I have applied the slice, something goes wrong. The 2 most common problems that I have after export are as follows:
1. The mis-shaped background panels are no longer gradient (they are solid blue) and the mis-shaped panels are rectangles and the buttons work but do not have a rollover effect.
2. When I place a slice over the mis-shaped panels and the buttons, the panels look the same after exporting but the buttons no longer function or have a rollover effect.
Please help...all I want to do is have the 2 mis-shaped panels with their buttons and the rollover effect function on all 13 pages after export. Could someone please tell me how I have to export them and if I should have a master page set? I would appreciate it if someone could include what I should and should not have selected for the export options.
Thank you in advance for anyone that can explain this to me.This tutorial may explain on how to get a Fireworks comp into Dreamweaver.
You need to slice all the images separately, including the background images as Linda mentioned, You would use the background images to be called in via a stylesheet.
TAKING FIREWORKS COMP TO DREAMWEAVER:
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
A series of beginner Dreamweaver tutorials that may be of help also:
Creating your first website (series)
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS42d4a1c0291fbe4e59147ede1232ff9686c-8 000.html -
I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac
So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
For the purposes of this I am going to assume you are using iPhoto '11.
Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
Select that album, then go to the File menu and select Export...
In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
Insert a blank DVD when prompted.
Let the finder complete the work and eject the disc afterwards.
That's it. Best of luck. -
Monetization rejected while using imovie trailer for film on youtube
i love to use the trailer for making quick an nice movies. As I uploaded them to youtube and tried monetize them via youtube they get rejected due to the music.
How do I clarify that this is music from iMovie and I bought it with the software?This question comes up from time to time. YouTube and Facebook are both wrong.
There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
“You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
http://images.apple.com/legal/sla/docs/ilife09.pdf
You should quote this (also providing the above link) when following the dispute process with YouTube. -
FIlm Offline to HD Online questions
Hey everyone,
I am an experienced Final Cut Pro user, working mainly in television, and am starting a new film project with a few questions.
We shot a feature length film, Super 16, one-light telecined to DigiBeta that was downconverted to DVCAM for us to offline edit on our Final Cut system. We were provided with Flex files for each reel and we're currently batching everyting in from the Cinema Tools Database we created into Final Cut.
Then we plan to edit the film and upon final cut, export a cut list to the film lab to re-telecine selects of the film, as a best-light, to HD. We plan to do the online and finalize everything in HD. Then possibly do a print out to film once the HD master is complete.
Two main questions:
1. Should we edit in 29.97, which is what we're currently diging our footage in right now? Or should we reverse telecine our clips and edit in 23.98? Remember our final format will be in HD.
2. When we produce our final cut list (EDL or Final Cut Pro project), the lab is going to telecine the film to HD which will create new timecode information and new Flex files for the online footage. What is the easiest way for us to uprez the final project of the film from the original offline DVCAM footage to the new HD footage?
Obviously most labs offer Online services, but we have the ability to online ourselves and would like to save that money. However we're missing that step of cross-referencing the film keycode information with the DVCAM timecode to the new HD timecode. Is there an automated way to do this, in Final Cut, or Cinema tools?
Thanks in advance.1- If you reverse telecine your clips, the flex file becemos useless since it was mande at 29.97 from the tracker in the original best light telecine transfer. Edit at 29.97 then have Cinema Tools change the EDL to 23.98
2- The part about re-telecine the whole show was (in my opinion) not a smart one since you'll have new lists, new timcode. The upconvert or uprez is not going to match unless they do the new re-telecine with the original timecode from the Dbetas, making sure that the same events are made on the "A" frames in the film keykode and 00's on the timecode (then the downconverting problem would be avoided).
If you plan to do an "Online" with your system you must have an HDCam deck, and have a correct capture card with the Final Cut. Why don't just have the neg cut of the final edit and then have it transferd in HD instead of doing the whole re-telecine of each clip for the online? It seems a lot of problems to go through the whole re-telecine with new information.
This is just my opinion, I might be wrong though. Hope this helps! -
Whenever I want to download a free app, it asks me for 3 security questions. I answer them. Then it says "session has timed out". Then the whole process starts over. How can I get around this?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
In the Bookmark Toolbar, the icons for websites take up too much space and are distracting. I used to use the Bookmarks - Deiconizer add-on but after updating to Firefox 22 it doesn't work anymore.
I tried adjusting the userChrome.css as in other posts but that does not work.
Please help!Hi haweyext,
Did you see this thread from yesterday:
[https://support.mozilla.org/en-US/questions/964732 How do I keep the icons out of my Bookmarks Toolbar (tried Bookmarks Deiconizer) even after downloading files?]
If userChrome.css isn't working (note: you need to exit and restart Firefox before it takes effect), you can apply that rule to Firefox using the Stylish extension instead.
Does any of that help? -
I need to export images from A3 to give to a client. The client purchased rights to a hi Res (300 dpi) and a web (72 dpi) image. Here is my question based on how I have my library set up. I have been setting everything up as a separate project. SO for this one, it is team name, with a folder inside with numebr and name, then an album, then the images....
RCBasketball>02 Thacker> 02 Thacker Album / image versions
I have 15 players (replace 02 Thanker with 03 Poindexter, etc...)
How do I set the export options to do this into a folder called RCBBALL/HIRES/PLAYERNAME (02 Thacker)/ IMAGEname (58BY2001.jpg)Howard Lucas1 wrote:
I need to export images from A3 to give to a client. The client purchased rights to a hi Res (300 dpi) and a web (72 dpi) image. Here is my question based on how I have my library set up. I have been setting everything up as a separate project. SO for this one, it is team name, with a folder inside with numebr and name, then an album, then the images....
RCBasketball>02 Thacker> 02 Thacker Album / image versions
I have 15 players (replace 02 Thanker with 03 Poindexter, etc...)
How do I set the export options to do this into a folder called RCBBALL/HIRES/PLAYERNAME (02 Thacker)/ IMAGEname (58BY2001.jpg)
It's a little difficult to make out exactly what you're going for here but in general when you export an image the *Folder Nameing* preset popup will appear. You can then design the folder structure you want to use for the export.
Also you can go to *Aperture->Presets->Folder Naming...* and create the preset these before you do any exporting. You can also save the preset you make so you can use it at a later date. -
Error in Export "EXP-00091: Exporting questionable statistics "
when i execute export on server having RAC DB R10g R2 on Linux 4 it return error , nobody has changed it's characterset .
how to fix this error, CAN THIS ERROR CAUSE BIG DESASTER TO DB IN FUTURE
C:\>exp hst/hst file='/home/oracle/expdat.dmp
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user NRI
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user NRI
About to export NRI's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export NRI's tables via Conventional Path ...
. . exporting table TABLEA 0 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table TABLEB 0 rows exported
EXP-00091: Exporting questionable statistics.
Kindly Help be ho can i fix this error
Thanks in advanceHello,
You wrote:
CAN THIS ERROR CAUSE BIG DESASTER TO DB IN FUTUREThe error message EXP-00091: Exporting questionable statistics just warns you that the statistics
were exported but these statistics may be not useable.
So, if you have to import these Tables, you may have to collect again the statistics of these Tables.
It's not relative to this problem but why don't you use DataPump (expdp/impdp) ?
Please find enclosed a link about DataPump, it's much more powerful than the classical export/import:
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1009203]
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Feb 6, 2010 12:56 PM -
EXP-00091: Exporting questionable statistics
Dear Friend,
I am using Linux Database and Windows database, the problem now I am facing while exporting data from Linux which is imported from windows oracle database dump file.
when I am exporting I am getting this error
EXP-00091: Exporting questionable statistics
and shows
Export terminated successfully with warnings
Now exported file I am importing from Linux to windows and getting this error
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Import file: EXPDAT.DMP > c:/aa.dmp
Enter insert buffer size (minimum is 8192) 30720>
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
Regards,
Oracle UserHi,
>>because I exported dump from oracle10G
Then you use the exp 10g version, right ? To move data DOWN a version(s), you need to export using that lower versions EXP tool and using IMP that lower version tool.
Take a look at this below?
Exporting Data From Release 10.2 and Importing Into Earlier Releases
Export From Import To Use Export Utility For Use Import Utility For
Release 10.2 Release 10.2 Release 10.2 Release 10.2
Release 10.2 Release 10.1 Release 10.1 Release 10.1
Release 10.2 Release 9.2 Release 9.2 Release 9.2
Release 10.2 Release 9.0.1 Release 9.0.1 Release 9.0.1
Release 10.2 Release 8.1.7 Release 8.1.7 Release 8.1.7
Release 10.2 Release 8.0.6 Release 8.0.6 Release 8.0.6
>>EXP-00091 is still remain.. you said I have to chang ethe NLS but I am new to linux
I think that there is no problem ... but you can use also as I said before the statistics=none clause, but remember that you need to use the exp 9i version ...
Cheers -
Current Time expressed in decimals + Keyframing export question
This was noted in an earlier post, but I could not reply since the thread was archived...
I've noticed that certain movies, when viewed in QTPro, express the current time (viewable in the movie info dialog) in decimals, rather than in frames.
For example, using a 30fps movie, a time of one second and 15 frames is instead shown under the current time (viewable in the movie info window) as :01.50 (hundreths of a second). This can be a problem if you are trying to count frames or note a particular time expressed in frames, rather than in fractions of a second.
After digging a bit, I discovered that movies compressed WITHOUT keyframing enabled DID NOT have this trait - the time is shown in frames instead.
The workaround is to export the movies from QTPro using a codec that does not support keyframes (for example - the Uncompressed codec).
I have two questions -
1. Why, when exporting a movie with keyframes on, does the video track frame rate end up with a value that goes to multiple decimal points? - For example:
- Export a movie from QTPro using the animation compressor and a frame rate of 30. Set Keyframes to anything you like (note that you cannot turn it off).
- View the exported movie, and press cmd-J (movie properties). The frame rate shown will likely be something like 29.3293293820932, and the current time (as shown in movie info (cmd-i)) will be in decimals.
If you export Uncompressed 30fps instead (keyframes are not supported in this codec), the resulting frame rate will be exactly 30, and the current time will be shown as FRAMES, not decimals.
2. WHY is it possible to render a Quicktime movie from After Effects, using ANY codec, and have the ability to turn keyframes OFF, whilst turning keyframes off seems to be impossible in QTPro when exporting a movie using a codec that supports keyframes?
Thanks for any help!
G5 Mac OS X (10.4.8)No - there's no variable frame rate - depending on the project, we're either using 29.97, 30 or 60fps.
We're using the "Current Time" in the movie info dialog so that people can make precise timing notes regarding animations without having to get to a machine with FCP, After Effects et.al. on it. Since we're concerned with getting exact frame numbers, we're using the Movie Info dialog rather than the time provided in the movie window.
Practically every movie we're using is coming from After Effects, Shake, or some other animation/compositing program.
The only times I've gotten those long-decimal frame rates is on a movie with keyframes set. Turn off keyframes, and the movie frame rate is exactly what we set it to be.
I'm guessing that we're bumping into something that's actually a cool trick - when Quicktime sees that a movie has a traditional frame rate (30, 60 or even 29.97 for example), it displays the current time in frames. When it loads a movie with an odd frame rate (particularly something like 29.9630843098) it calculates and displays in thousanths of a second instead.
Nonetheless, we're setting all the movies to a defined frame rate. The movies exported without keyframes end up with the correct rate, and the ones with keyframes end up with a frame rate that have many decimal places.... -
Best jpg quality for website work?
I realize that 72 dpi is the best resolution to use for website images, but at what quality level should I export my image files (1-12) ?
Yes good advice here. Why use a number that someone else has suggested to you when you could instead do a little experiment on your own? Simply export your image at different quality settings. If you can't notice a difference, better 9 and 10, go for the smaller number. rinse and repeat.
Be aware: different images call for different quality settings. Simple graphic images compress better than photos with with smooth gradients (sunsets for example). If there was just one best setting, there wouldn't be any setting at all--just a save button. The reason there is a setting is so that you can use exercise your judgement. If you don't trust you own eyes, throw it up on polarb.com and invite some trusted friends to vote. -
Just downloaded the Maverick OS and ARCH...my image manager (for Advance Direct dashboard for website) has lost the Insert & Cancel buttons so I'm stuck in Image Manager without an option to move forward HELP!
HI,
You can order the HP Recovery Discs online or by calling HP Tech Support...Hp Recovery discs will not require any product keys..
Here is the link that will guide you to order the discs online..
Ordering your Recovery Discs!
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed. -
My main question is a very basic exporting question, but here is a super-condensed explanation of my big-picture goal for context:
Large (~450 MB) aiff on CD --> trim w/ Quicktime --> small (~16 MB) MP3 in iTunes
I would like to take an audio file (aiff) that is approximately 450 MB and export it from Quicktime and in doing so, reduce the file size and convert it to MP3. When I simply try to export it, it doesn't ask me about what size I want, nor does it give the option of MP3 formatting.
I have figured out how to reach my goal, but it's a mess. After I make my trims in QT, I have to:
1. select "share" instead of "export".
2. It asks me what size I want and I select small.
3. The file is then exported as a Quicktime movie into Mail and the size is reduced from 450 MB to about 20 MB.
4. I then have to "right-click" on the attachment in the email that is created,
5. save the attachment,
6. discard the email,
7. import the file into iTunes, and
8. create an MP3 in iTunes to finally arrive at my goal.
This seems like a ridiculously convoluted process to change a large aiff to a small MP3 and put it in iTunes. Any suggestions?Thanks. I guess the basic answer to my question is that it can't be done in one or two fell swoops. The problem is that it starts on a burned disc, and I need to make edits to it before it ends up in iTunes (to be eventually used in iWeb). I was hoping to avoid juggling back and forth between iTunes and QT. I either would have to send it back to QT to do the edits after -->iTunes-->mp3, or import the large file from the CD to QT, make the edits, save changes, import large file to iTunes, convert to mp3.
Maybe you are looking for
-
How do I Install Classic on 10.3.9?
I already have Classic on my wife's computer internal HD. I'm now setting up an external drive from scratch with the DVD install that came with the computer 10.3.7 . + updates 10.3.9 I'm not sure (don't remember) if OS9 classic came with OSX 10.3.7,
-
Built-in camera light always on
is someone watching me, or what?
-
Movement Type & Excise Register
Hi Experts ! Is there any configuration between movement type & Excise Register, where do we define Excise Register's receipt / issue indicator for movement type I want to define movement type 161 in RG23A Part I Issue side, at present with the exist
-
Gun Bros 2, Buck Pack C is error i bought a lot of credit but not have got a money in this game . Could i refund all that i bought it???? i want to buy only one(19dollars) cause it errored bought 7times. so i need money back right now Best regards
-
Hi guys I run Pr CC on a Win7 64bit machine and reloaded all my CC programs recently. Previously my dynamic link was set to Audition but now it set itself to AE. I cannot seem to find a way to change it back to Audition in the preferences, which is m