FILMING WITH REBELT31, OPTIONS FOR RECORDING IN LOW LIGHT.

Hi there everyone. My question is that I want to know about a lenses that supports me good definition and quality in low light conditions. I am recording with a Rebel t3i. Thanks in advance.

bebefle_89 wrote:
This is my first DSLR and I am recording weddings and parties. For the nature of these events, most of them have low light conditions. I also need advice of a gadget to record everything without changing SD cards. Thanks.
The solution is a bigger (higher capacity) SD card. =) They go up to 64gb and 128gb now which should provide A LOT of recording capacity.
bebefle_89 wrote:
At the time, I've been working just with the 18-55 (the one that comes with the camera package), but I need an aditional lense because this lense I have, is graining all my videos because of the adjustment of ISO.
How much do you understand about f-stops, shutter speed, and ISO? What exposure settings are you using now for your videos? In short, you need a lens that can open up to a larger aperture (such as f/1.8, f1.4 or f1.2).
Here are some guides that will be helpful in explaining these concepts for you:
http://www.exposureguide.com/exposure.htm
http://www.makethephoto.com/articles/how-to-make-the-jump-from-automatic-shooting-to-manual-shooting

Similar Messages

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Exhausted with all options for error "No active userstore is set"

Dear Experts,
I changed the client number to 200 in UME configuration from default client number 001. Also I had created a system user SAPJSF in the backend system in client 200. I restarted the j2ee engine but its not starting. I received this error WebAS running. Server not found. The log says "No active userstore is set".
I have researched the forum and tried out *all the notes and set the parameters in visual administrator tool*. Nothing is working.
I have reinstalled my system atleast 4 times after and finally I have exhausted with all options.
Please Help.

Dear Sunny,
Thanks for the response. I had tried it for both client 000 and client 001. The problem still persists. I am thinking of raising an OSS message. Any other suggestion appreciated.
Regards,
P Thompson

BDC options for recording

Hi all gurus!
When we go to SHDB, we have 4 options to set - Default Window, Don't end recording after commit, simulate background mode and "No BDC mode".
I guess I am aware of the meaning of No bdc mode -> which probably means that SY-BINPT will be SPACE if I set it to X.
No end of BDC after commit is also obvious that it will not end BDC after COMMIT. But when should we set it while recording?
What is SIMULATE background mode? Does it mean SY-BATCH is set to 'X"? When we run BDC in session mode, is Sy-batch set to 'X'? Should we set this parameter or not? This is not clear.
Also, in what scenarios should we check Default window?
My understanding is that it should not matter how we set the parameters while recording. Important thing is we should code in similar manner. So whatever was set while recording, same should be set while coding in CTUPARAMS. Is it correct?
Thanks in adv !

Check the following thread
Recording Options for SHDB

Which camera body next for sports and low light?

All: I have that bug to get another Canon body. I have the opportunity to get a 7D for a little over $400, but is this the camera for me? I have gone from the Canon XTI to the Canon 60D. I love the 60D and thought of getting a 2nd body to keep the camera stuff (charger, batteries and SD cards) simpler and convenient. But I have been thinking of upgrading, if I am going to look for a 2nd body. I shoot a lot of low light and sports (soccer, basket ball and baseball mostly). To help with the low light, I upgraded my telophoto lens from a Tamron AF Aspherical XR DI LD(IF) 28-300 that is great for outdoors, but struggles a little inside.To upgrade that, I bought the Canon Zoom Lens EF 70-200mm 1:2.8 L. This lens took care of my low light indoor problem with school concerts. In reading a little, they say the 7D is the way to go. But it is the first series, not the 2nd. Does that really matter? Instead of reading for hours, days and weeks, can some of you shed some light on what you think? I am also trying to stay in a reasonable budget of less than a $1000. Don't tell the wife I have the bug. That I will worry about after I decide what might be right. I look forward in hearing from the forum and I thank you ahead of time for your feedback and suggestions.

All: I have that bug to get another Canon body. I have the opportunity to get a 7D for a little over $400, but is this the camera for me? I have gone from the Canon XTI to the Canon 60D. I love the 60D and thought of getting a 2nd body to keep the camera stuff (charger, batteries and SD cards) simpler and convenient. But I have been thinking of upgrading, if I am going to look for a 2nd body. I shoot a lot of low light and sports (soccer, basket ball and baseball mostly). To help with the low light, I upgraded my telophoto lens from a Tamron AF Aspherical XR DI LD(IF) 28-300 that is great for outdoors, but struggles a little inside.To upgrade that, I bought the Canon Zoom Lens EF 70-200mm 1:2.8 L. This lens took care of my low light indoor problem with school concerts. In reading a little, they say the 7D is the way to go. But it is the first series, not the 2nd. Does that really matter? Instead of reading for hours, days and weeks, can some of you shed some light on what you think? I am also trying to stay in a reasonable budget of less than a $1000. Don't tell the wife I have the bug. That I will worry about after I decide what might be right. I look forward in hearing from the forum and I thank you ahead of time for your feedback and suggestions.

Problem with 'BACK' option for ALV grid

Hi Friends,
I'm using FM, REUSE_ALV_GRID_DISPLAY in my report.
Once I got an ALV output, when I press the BACK button,
it's going to blank sceen again when I press BACK am getting selection screen.
From output am not able to goto the selection screen. Kindly suggest on this issue.
Thanks in advance.
Regards,
Bharat.

Hi,
I don't have write statement anywhere in my prog.
pls refer to the code.
REPORT ZCDC_TRACKING_REPORT no standard page heading message-id zz1
tables:vbak,
       vbap,
       vbkd,
       vtfa,
       vbfa,
       vtrkh,
       vttk.
TYPE-POOLS: SLIS.                      "Field catalog structure
DATA: FCATALOG TYPE SLIS_FIELDCAT_ALV OCCURS 30.
DATA: FZEILE   TYPE SLIS_FIELDCAT_ALV OCCURS 30 with header line.
data:w_disp_variant TYPE disvariant,
     s_alv_layout   type slis_layout_alv.
DATA: W_REPID     LIKE SY-REPID,
      W_SUBRC     LIKE SY-SUBRC,
      W_LOOPCOUNT LIKE SY-TABIX,
      W_LINES     TYPE I,
      IS_VARIANT LIKE DISVARIANT,
      GS_LAYOUT   TYPE SLIS_LAYOUT_ALV.
*Internal table declaration.
data: begin of i_vbak occurs 0,
      vbeln like vbak-vbeln,
      kunnr like vbak-kunnr,
      bstnk like vbak-bstnk,
      end of i_vbak.
data: begin of i_vbfa occurs 0,
      vbeln like vbfa-vbeln,
      vbelv like vbfa-vbelv,
      end of i_vbfa.
data: begin of i_vtfa occurs 0,
      tknum like vtfa-tknum,
      vbeln like vbak-vbeln,
      end of i_vtfa.
data: begin of i_vttp occurs 0,
      tknum like vtfa-tknum,
      vbeln like vbak-vbeln,
      end of i_vttp.
data: begin of i_vttk occurs 0,
      tknum like vtfa-tknum,
      vsart like vttk-vsart,
      dtabf like vttk-dtabf,
      tdlnr like vttk-tdlnr,
      TNDR_TRKID like vttk-TNDR_TRKID,
      end of i_vttk.
data: begin of i_final occurs 0,
      kunnr like vbak-kunnr,
      name1 like kna1-name1,
      vbeln like vbak-vbeln,
      bstkd like vbkd-bstkd,
      dtabf like vttk-dtabf,
      tdlnr like vttk-tdlnr,
      TNDR_TRKID like vttk-TNDR_TRKID,
      end of i_final,
      wa_final like i_final.
data: v_name1 like kna1-name1,
      v_trackno like vtrkh-trackn.
**selection-screen.
SELECTION-SCREEN begin of block b1 with frame.
parameters: R1 RADIOBUTTON GROUP rad1 DEFAULT 'X'.
parameters: p_vbeln like vbak-vbeln,
            p_bstkd like vbkd-bstkd.
SKIP.
SKIP.
*SELECTION-SCREEN end of block b1.
*SELECTION-SCREEN begin of block b2.
parameters: R2 RADIOBUTTON GROUP rad1.
select-options: s_kunnr for vbak-kunnr.
select-options: s_dtabf for VTTK-DTABF.
SELECTION-SCREEN end of block b1.
SELECTION-SCREEN begin of block b2 with frame.
parameters: P_track RADIOBUTTON GROUP rad2 default 'X',
            P_car RADIOBUTTON GROUP rad2,
            P_both RADIOBUTTON GROUP rad2.
SELECTION-SCREEN end of block b2.
**Initialization.
Initialization.
MOVE SY-REPID TO W_REPID.
*At selection-screen.
At selection-screen.
if R1 eq 'X'.
   if p_vbeln eq ' ' and p_bstkd eq ' '.
     message e000(zz1) with 'Please enter either PO # or SO #'.
   endif.
elseif R2 eq 'X'.
if ( s_kunnr-low is initial and s_kunnr-high is initial ) and
     ( s_dtabf-low is initial and s_dtabf-high is initial ) .
     message e000(zz1) with 'Please limit your selection criteria, this'
                         'cannot run without a Customer # & Date range'.
endif.
endif.
**start-of-selection.
start-of-selection.
**if option foreground is selected
IF R1 eq 'X'.
**step1 select data from VBAK,VBKD
**step2 select data from VTTK
perform get_data_foreground.
Perform process_data.
elseif R2 eq 'X'.
**if option Batch processing selected
**select data from KNA1,VBAK,VTTKelseif R2 eq 'X'.
perform get_data_batch_processing.
endif.
Perform process_data.
end-of-selection.
*&      Form get_data_foreground
      text
--> p1        text
<-- p2        text
form get_data_foreground .
if p_vbeln ne ' ' and p_bstkd ne ' '.
select vbeln
       kunnr
       bstnk
       from vbak into table i_vbak
       where vbeln eq p_vbeln
         and bstnk eq p_bstkd.
elseif p_vbeln eq ' ' .
select vbeln
       kunnr
       bstnk
       from vbak into table i_vbak
       where bstnk eq p_bstkd.
elseif p_bstkd eq ' '.
select vbeln
       kunnr
       bstnk
       from vbak into table i_vbak
       where vbeln eq p_vbeln.
endif.
**Get data from VBFA
if not i_vbak[] is initial.
   select vbeln
          vbelv from VBFA into table i_vbfa
          for all entries in i_vbak
          where vbelv = i_vbak-vbeln
            and vbtyp_n = 'J'.
endif.
**select data from VTTP
if not i_vbfa[] is initial.
   select tknum
          vbeln
          from vttp into table i_vttp
          for all entries in i_vbfa
          where vbeln = i_vbfa-vbeln.
endif.
*select data from VTTK
if not i_vttp[] is initial.
   select tknum
           vsart
           dtabf
           tdlnr
           TNDR_TRKID from vttk into table i_vttk
           for all entries in i_vttp
           where tknum eq i_vttp-tknum.
endif.
**select data from VTFA
if not i_vbak[] is initial.
select tknum
         vbeln
         from vtfa into table i_vtfa
         for all entries in i_vbak
         where vbeln = i_vbak-vbeln.
endif.
*select data from VTTK
if not i_vtfa[] is initial.
select tknum
          dtabf
          tdlnr
          TNDR_TRKID from vttk into table i_vttk
          for all entries in i_vtfa
          where tknum eq i_vtfa-tknum.
endif.
endform.                    " get_data_foreground
*&      Form get_data_batch_processing
      text
--> p1        text
<-- p2        text
form get_data_batch_processing .
select vbeln
       kunnr
       bstnk
       from vbak into table i_vbak
       where kunnr in s_kunnr.
**Get data from VBFA
if not i_vbak[] is initial.
   select vbeln from VBFA into table i_vbfa
          for all entries in i_vbak
          where vbelv = i_vbak-vbeln
            and vbtyp_n = 'J'.
endif.
**select data from VTTP
if not i_vbfa[] is initial.
   select tknum
          vbeln
          from vttp into table i_vttp
          for all entries in i_vbfa
          where vbeln = i_vbfa-vbeln.
endif.
*select data from VTTK
if not i_vttp[] is initial.
   select tknum
           vsart
           dtabf
           tdlnr
           TNDR_TRKID from vttk into table i_vttk
           for all entries in i_vttp
           where tknum eq i_vttp-tknum
             and dtabf eq s_dtabf.
endif.
**select data from VTFA
if not i_vbak[] is initial.
select tknum
         vbeln
         from vtfa into table i_vtfa
         for all entries in i_vbak
         where vbeln = i_vbak-vbeln.
endif.
**select data from VTTK
if not i_vtfa[] is initial.
select tknum
          dtabf
          tdlnr
          TNDR_TRKID from vttk into table i_vttk
          for all entries in i_vtfa
          where tknum eq i_vtfa-tknum
            and dtabf eq s_dtabf.
endif.
endform.                    " get_data_batch_processing
*&      Form process_data
      text
--> p1        text
<-- p2        text
form process_data .
**loop processing
loop at i_vbak.
   wa_final-vbeln = i_vbak-vbeln.
   wa_final-bstkd = i_vbak-bstnk.
   wa_final-kunnr = i_vbak-kunnr.
   select single name1 into v_name1
                       from kna1
                       where kunnr eq wa_final-kunnr.
   if sy-subrc eq 0.
     wa_final-name1 = v_name1.
   endif.
read table i_vbfa with key vbelv = i_vbak-vbeln.
if sy-subrc eq 0.
     read table i_vttp with key vbeln = i_vbfa-vbeln.
     if sy-subrc eq 0.
        read table i_vttk with key tknum = i_vttp-tknum.
         if sy-subrc eq 0.
            wa_final-dtabf = i_vttk-dtabf.
            if p_track eq 'X'.
               if i_vttk-vsart = 'LTL'.
                  wa_final-TNDR_TRKID = i_vttk-TNDR_TRKID.
               else.
                 select single trackn from VTRKH into v_trackno
                                  where uevbeln = i_vbfa-vbeln
                                    and uevbtyp = 'J'
                                    and vbtyp   = 'X'.
                   if sy-subrc eq 0.
                    wa_final-TNDR_TRKID = v_trackno.
                   endif.
               endif.
            elseif P_car eq 'X'.
               wa_final-tdlnr = i_vttk-tdlnr.
            else.
               wa_final-tdlnr = i_vttk-tdlnr.
               if i_vttk-vsart = 'LTL'.
                  wa_final-TNDR_TRKID = i_vttk-TNDR_TRKID.
               else.
                 select single trackn from VTRKH into v_trackno
                                  where uevbeln = i_vbfa-vbeln
                                    and uevbtyp = 'J'
                                    and vbtyp   = 'X'.
                   if sy-subrc eq 0.
                    wa_final-TNDR_TRKID = v_trackno.
                   endif.
               endif.
            endif.
         endif.
      endif.
endif.
append wa_final to i_final.
clear : i_final, wa_final,i_vbak,i_vbfa,i_vttp, i_vttk,v_name1.
endloop.
IF R1 eq 'X'.
PERFORM FIELDCATALOG.
PERFORM LAYOUT_BUILD CHANGING GS_LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
         I_CALLBACK_PROGRAM       = W_REPID
         IS_LAYOUT                = GS_LAYOUT
         IT_FIELDCAT              = FCATALOG
        TABLES
             T_OUTTAB             = i_final
        EXCEPTIONS
             PROGRAM_ERROR        = 1
             OTHERS               = 2.
else.
PERFORM BACKGROUND_JOB.
**Transfer of data into Application server
OPEN DATASET P_PFILE for output IN TEXT MODE encoding DEFAULT .
if sy-subrc eq 0.
      loop at itab.
     transfer itab to p_pfile.
    endloop.
else.
   message e000(zz1) with p_pfile.
endif.
CLOSE dataset p_pfile.
endif.
endform.                    " process_data
*&      Form FIELDCATALOG
      text
--> p1        text
<-- p2        text
form FIELDCATALOG .
DATA: L_FIELDNO LIKE SY-TABIX.
L_FIELDNO = 1.
**Cust. Number
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'KUNNR'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 15.
FZEILE-SELTEXT_L = 'Customer' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Customer name
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'NAME1'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 35.
FZEILE-SELTEXT_L = 'Customer Name' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Sales order
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'VBELN'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 10.
FZEILE-SELTEXT_L = 'Sales order' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Custmoer PO
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'BSTKD'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 30.
FZEILE-SELTEXT_L = 'Custmoer PO' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Date shipped
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'DTABF'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 15.
FZEILE-SELTEXT_L = 'Date shipped' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Carrier
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'TDLNR'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 15.
FZEILE-SELTEXT_L = 'Carrier' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
**Tracking/Pro #
CLEAR FZEILE.
FZEILE-COL_POS    = L_FIELDNO.
L_FIELDNO         = L_FIELDNO + 1.
FZEILE-FIELDNAME = 'TNDR_TRKID'.
FZEILE-DATATYPE   = 'CHAR'.
FZEILE-OUTPUTLEN = 15.
FZEILE-SELTEXT_L = 'Tracking/Pro#' .
FZEILE-LOWERCASE = 'X'.
FZEILE-SP_GROUP   = 'A'.
FZEILE-KEY = 'X'.
FZEILE-DDICTXT       = 'M'.          " medium text
APPEND FZEILE TO FCATALOG.
CLEAR FZEILE.
endform.                    " FIELDCATALOG
*&      Form LAYOUT_BUILD
      text
     <--P_GS_LAYOUT text
form LAYOUT_BUILD changing p_gs_layout TYPE SLIS_LAYOUT_ALV.
CLEAR P_GS_LAYOUT.
P_GS_LAYOUT-ZEBRA            = 'X'.
P_GS_LAYOUT-BOX_FIELDNAME    = SPACE.
P_GS_LAYOUT-MAX_LINESIZE     = 250.
endform.                    " LAYOUT_BUILD
*&      Form BACKGROUND_JOB
      text
--> p1        text
<-- p2        text
form BACKGROUND_JOB .
DATA: JOB_NAME         LIKE TBTCO-JOBNAME,
JOB_NR           LIKE TBTCO-JOBCOUNT,
JOB_RELEASED     TYPE C,
JOB_START_SOFORT TYPE C.
DATA: TITEL(15) TYPE C,
TEXT1(35) TYPE C,
TEXT2(40) TYPE C,
ANSWER    TYPE C.
DATA: PARAMS    LIKE PRI_PARAMS,
VALID     TYPE C.
JOB_NAME = SYST-REPID.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME          = JOB_NAME
IMPORTING
JOBCOUNT         = JOB_NR
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS           = 4.
IF SYST-SUBRC NE 0.
MESSAGE I162(00) WITH
'An error occured while creating the background job.'.
STOP.
ELSE.
*set print parameters to output any errors to spool...
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY            = ' '
MODE                   = 'BATCH'
NO_DIALOG              = 'X'
RELEASE                = 'X'
NEW_LIST_ID            = 'X'
LINE_SIZE              = SY-LINSZ
*LIST_NAME              = 'RBE'
LIST_TEXT              = 'Extract Results'
IMPORTING
OUT_PARAMETERS         = PARAMS
VALID                  = VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS   = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS                 = 4.
IF VALID NE SPACE.
*submit job with all the selection screen params...
SUBMIT (JOB_NAME) USER SYST-UNAME
VIA JOB JOB_NAME NUMBER JOB_NR
*WITH CLIENT   = CLIENT
*WITH MONIFROM = MONIFROM
*WITH MONI_TO = MONI_TO
*WITH TQ_FROM = TQ_FROM
*WITH TQ_TO    = TQ_TO
*WITH WORKLOAD = WORKLOAD
*WITH ALL      = ALL
*WITH SPL1     = SPL1
*WITH APPSERV1 = APPSERV1
*WITH SPOOLNR = SPOOLNR
*WITH APPPATH1 = APPPATH1
*WITH PCPATH   = PCPATH
*WITH SPL2     = SPL2
*WITH APPSERV2 = APPSERV2
TO SAP-SPOOL SPOOL PARAMETERS PARAMS
WITHOUT SPOOL DYNPRO
AND RETURN.
IF SYST-SUBRC <> 0.
CASE SYST-SUBRC.
WHEN 4.
MESSAGE I162(00) WITH
'Error defining background job!'
' Background job canceled by User.'.
WHEN 8.
MESSAGE I162(00) WITH
'Error defining background job!'
' Error in job scheduling (JOB_SUBMIT)'.
WHEN 12.
MESSAGE I162(00) WITH
'Error defining background job!'
' Error in internal number assignment'.
ENDCASE.
ENDIF.
endif.
endif.
endform.                    " BACKGROUND_JOB

Problem with F4 option for one field

Hi,
While creating pricing condition records (VK11), one field is not having F4 option. That field is KGKG1 (Condition group1).
Ihave created one table with s.org, dist.channel and condition group1 (KDKG1).
While creating onle this problem. While changing and displaying the F4 option (i am able to select the values from list) available.
What would be the reason. Is it require to change in table like domain, fields.
Please help me to solveit out.
Regards
Lakshmikanth

Hi,
you can create new condition groups here.
IMG>Logistics - General>Business Partner>Customers>Control>Define Condition Groups.
Goto Customer master maintain condition groups.
XD01/02. goto general data , In Menu select Extras and choose additional data. maintain condition group for customer.
Regards,
Chandra

Is it possible to create a subscription page with different options for blog, newsletter, product announcements, training events, etc?

I would like to create a subscription page for my Muse site with different subscription choices, but I am not sure if it is possible or, if it is how I should construct it. Any ideas?

Hi
This can be done from hosting platform end. If you are using Business Catalyst to host your site , then you can use events module, campaign subscriptions , secure zone subscriptions etc.
You can create the events/announcements on BC end and then add the module in Muse page which on publish will show the modules on page.
Thanks,
Sanjit

Possible to create a form with different options for different items?

So I want to create a form in DW but the problem is that I have 3 items....and I want different form subjects for each item? Is there a way to do this so that if select item #1 that 1 set of options comes up....if I select item #2 a different set of options etc.??
thanks much!

Another simple example that you can style up.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Untitled Document</title>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script>
$(document).ready(function() {
$('#option_2, #option_3').hide();
$('#selectOption_1').click(function() {
$('#option_1').show();
$('#option_2, #option_3').hide();
$('#selectOption_2').click(function() {
$('#option_2').show();
$('#option_1, #option_3').hide();
$('#selectOption_3').click(function() {
$('#option_3').show();
$('#option_1, #option_2').hide();
</script>
</head>
<body>
<form>
<select>
<option id="selectOption_1" value="option_1">Option 1</option>
<option id="selectOption_2" value="option_2">Option 2</option>
<option id="selectOption_3" value="option_3">Option 3</option>
</select>
<div id="option_1">
<select>
<option value="option_1_1">Option 1_1</option>
<option value="option_1_2">Option 1_2</option>
<option value="option_1_3">Option 1_3</option>
</select>
</div>
<div id="option_2">
<select>
<option value="option_2_1">Option 2_1</option>
<option value="option_2_2">Option 2_2</option>
<option value="option_2_3">Option 2_3</option>
</select>
</div>
<div id="option_3">
<select>
<option value="option_3_1">Option 3_1</option>
<option value="option_3_2">Option 3_2</option>
<option value="option_3_3">Option 3_3</option>
</select>
</div>
</form>
</body>
</html>

Publishing an iCal group with different options for each calendar

I work at a University and I've my various functions organized into their own calendar; I've a Office calendar for my office activities, a Class calendar for my class activities, a Club calendar for my club activities, and of course a personal calendar. The personal calendar is not published.
As a general rule, the folks from each fuction know to go to the calendar I've published for them to keep track of their activities. But they also need to see when I'm available, and for that they need to see my entire calendar.
They need to see what activity I'm engaged in because some of the time I've blocked out is inflexible - class times for example, or departmental meetings - so they know those times are unavailable; but some of the time I've blocked out is relatively flexible - like when I'm listed as being in the office working on a project.
I can publish them all as a group, but there is one universal setting as to whether each calendar in the group shows details or not. Is there a way to customize what is shown for each calendar in the group? Basically, I don't want the details of my personal calendar published with the rest, but they need to see that I have that time blocked out for something so they know I'm not available. If I don't publish my personal calendar, gaps show up on the grouped calendar that really is not there - it's not time available for someone to schedule an activity.
And one other question - is there a setting that preserves the colors of the various calendars when published? Right now they all show up as one color. It would help each group if they could scan the complete calendar for their activities.

Hi K.
I don't think it's possible to have those text properties vary in a text-ring, but you might be able to accomplish your goal using a pict-ring - using images of formatted text. In the example (attached) Paint was used to create the pictures then import them into the pict-ring. Here Unclebump shows how to use "Draw Text at Point.vi" to create formatted text in a picture control, though, I have no idea how to copy such pictures out of the pictures control!
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
FormattedTextPicRing.vi ‏14 KB

No "Open with Rosetta" option for Dreamweaver 2004 MX

I have a new Intel Mini 1.66 Core Duo with 2 GB RAM and I cannot start up Dreamweaver 2004 MX 7.0.1 I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
The program DW 2004 works fine on my PowerBook G4.
Any ideas? The program did not want to install in the Intel mini, so I had to copy the install file (*.sea) over top of stuffit to get it to install.
Please help.
Thanks

I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
This option will only appear when an application's kind is reported as being Application (Universal) and you are using an Intel Mac, as this is the only configuration which gives you the option to choose between architectures, and the checkbox only appears when running both architectures is possible with a given application on your model of Mac. If you are using a PowerPC-only application on an Intel Mac or a PowerPC or Universal application on a PowerPC Mac, only the PowerPC code can be executed, and the Open with Rosetta checkbox will not appear.
(14790)

Options for resize datafile lower than high watermark besid alter table mov

hello all,
I have an issue where i am getting ORA-03297 error when trying to resize the datafile. Its becuase of high watermarks. I know i have couple of options...either resize it till the high watermark or Drop or move segments containing extents in this region prior to
resizing the file....but the situation is this....this a test env...and we have couple of chained rows and doing that(alter table move) will get rid of our chained rows and we do not want that....as we are testing the removal of chained row from our prod systems....as i mentioned we cant do alter table move
what other options do we have in order to shrink datafile below highwater mark besides moving or droping the segment into a different tablespace as we want to preserve the chianed rows for our testing and making the DB smaller in size (space issue on the server ) ??? any ideas or any thoughts ??
we are on 10.2.0.3 on AIX system
i have already went thru these metalink doc .... on that error
Note 1029252.6 - How to Resize a Datafile
Note 130866.1 - How to Resolve ORA-03297 When Resizing a Datafile by Finding the Table Highwatermark
Note 237654.1 - Resizing a Datafile Returns Error ORA-03297

i am sorry not able to get your question ??
I want to shrink the space of the Datafile without removing the chaned rows for testing the removal of chianed row for prod. The reason why is becoz of rman backup space issue. If we shrink the datafile our DB will be down to 150GB....and if we cant its about 450GB...which is big difference...and the reason for backup for this dev env is because once we have tested teh removal of chained rows...we will restore it again and re-test it and its a very mission critial system...we need to test this min of 3 times to get teh change approved...thats why...if we have a backup now...we can remove chain rows and then restore it back to this point and test it again...if you know wat i mean

Audition seems to have updated its layout and options for recording..

i am no longer able to record while hearing the playbacc in both sides of tha headphones. uggh i just finally figured all this stuff out and now its changed and unable to record....

I think you're going to have to provide more information. Describe how you set up record in Audition. What happens exactly when you try it? Error messages?

Problem with Edit option for a role created in GRC 10.0

Hello Experts,
I created a role in GRC 10.0 , I see my newly created role in the list of roles . If I want to Edit the role I select the row and click " OPEN" and edit the role.
But when I click the role directly and enter the role , the "EDIT" button is disabled and even maintain authorization button is disabled.
Did SAP defined in such a way that we should selct the role and click OPEN then only we can Edit or is this a Bug??
Please let me know if any one of you faced the same problem.
Regards,
Jagadish Bhandaru

Hi,
Sabita is correct.
Here is the link to the documentation
SAP Access Control 10.0
Simon

Recording Options for SHDB

Hey all,
Please could someone explain what all the different options for recording BDC in SHDB are. In specific I'm interested in knowing what the CATT mode (No CATT, CATT with individual screen control & CATT without individual screen control) and the Simulate Background Mode options do.
Thank you
Tim.

hi,
Check this link
http://www.sap-img.com/sap-catt.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pf
Usually from what I have seen CATT is not used for regular transactions in the productive environment. I have only seen LSMW used for the transfer of data from non-SAP systems to SAP systems. It guides you thru your data migration tasks.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e21017408e11d1896b0000e8322d00/content.htm
- SAP advise not to use CATT in productive systems.
http://www.planetsap.com/basis1.htm
- Start of CATT processes allowed: This option determines whether you want to allow the CATT (Computer Aided Test Tool) process in the client or not. Computer Aided Test Tool (CATT) is tool provided by SAP to test different functionality of the SAP system. To run the CATT tool you can execute transaction SCAT. CATT process changes the database extensively and requires lot of system resources. So we recommend not to chose this option if you are in the production environment.
There has also been some comments on LSMW on this forum:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D37272%26tstart%3D135
- The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
My 2 cent would be why not develop a solution using Batch Input, BAPI etc?
Check these links
http://help.sap.com/saphelp_nw04/helpdata/en/48/c521a8f6ec11d2bdde080009b4534c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/frameset.htm
http://www.thespot4sap.com/Articles/CATT.asp
http://www.sap-img.com/sap-catt.htm
it is one of the option for call transaction
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/e21481408e11d1896b0000e8322d00/frameset.htm
http://www.sd-solutions.com/documents/SDS_CATT.html
Please check this online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf

FILMING WITH REBELT31, OPTIONS FOR RECORDING IN LOW LIGHT.

Similar Messages

Maybe you are looking for