Filmscoring: Different meters lead to crazy results when you try to edit
Hallo,
I'm working with music, that includes a lot of meter changes all the time. Think of Strawinskys "Sacre" or Messiaens "Turangalila" or anything like that (I wish I had something of their genius...)
When I try to change the meter of any bar in the middle of the arrangement, the following bars often loose their original meter. This also occurs when I cut a period of time (with meter changes) and try to insert this sequenze(period) at another position. Sometimes Logic asks me if I want to add a measure to preserve the following meter changes. If I choose yes, the result is not what I wanted to have - and if I say no, its also chaos. The meters seem to change randomly after inserting. I cannot recognize a system in the behaviour of logics Mastertrack.
Also working with the meter-editor in Logic is not funny! If you have a complex score and change anything in the editor it can destroy your meters completely and you will be forced to do it from scratch - when you realize what happened.
Does anybody - who also works with a lot of meter changes -have the same experience with that problem?
I know, that's not only a Logic problem. I also know this issue from Cubase (My composition-professor at the university complained about that problem all the time)
I've lost so many hours with that silly thing.
I would appreciate your feddback very much.
Eddie
hi eddie,
i too use metre changes extensively. really extensively. logic is not friendly in its 'helpfulness' with regards to retrospective editing of them.
the best way i find is to enter them in score using the palette, and edit them the same way.
here is what the problem is, it may help you to understand the limitation (it is more of a limitation than a bug);
if you have a 2/4 and then later 4/4, when you edit the 2/4 so that the value of your new time signatures passes through 4/4, the 4/4 will be deleted. logic sees the 4/4 as being redundant. otherwise it will simply disappear until you edit the 2/4 to a value that will result on a full bar at that position in the piece. ie 1/4 or 2/8 or something.
i too have tried snipping time with complex signatures throughout a piece and have had nothing but nonsense to sort out. you can try and open the signature editor and editing the start of the time signature changes, but i either don't understand how to do it (in which case i suspect i am in very good company) or it is so poorly implemented as to almost justify the 'b' word. at the very least, the work flow for this sort of thing has not been considered.
what we need is for parts of the song to be locked - all tempo changes and signature changes locked into a macro structure that can be moved around within arrange. i really don't think we can expect that anytime soon with all the changes that have happened at apple but i could be wrong - i would love to be wrong. but i think ultimately, in years to come, we will get something like that.
imagine: we'll be telling our kids 'i remember when we were using logic 7 and you couldn't even lock time signatures!'
Similar Messages
-
Does an icon become invisible when you try to edit it?
when i was looking for the finder in finder i found it and tryed to edit it and it said "you do not have permision to edit this" so i stoped and exited then later i saw that the finder icon in my dock is invisible i cant still open it but i cant see it i have tryed a lot of things but nothing has worked. i also tryed to edit the trash icon and that is invisible to i also cant rite clicck the things in the dock. i have no idea why mabye it disables the pic when some one trys to edit it. thanks for helping if you can.
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Understanding Restrictions > http://support.apple.com/kb/HT4213 -
Entry in contact list does not show up when you try to edit the list in v4
When clicking the "To" box for a new message I have as the last entry a name in bold that is not something I recognize and when going into my contact list so as to remove it, it does NOT show up.
How do I get rid of it? IE: find it so as to delete it. Search in windows 7 does not locate the file. Below is header when asking for source.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html style="overflow:hidden;">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<style type="text/css">body{display:none;}</style><script type="text/javascript">//<![CDATA[
document.domain="live.com";var $CJ={p:'oW4FrovLqBupRKg45hbwJPnFBJ9loqzn4zN2PaAzotg\x3d0',c:'',s:1};new function(){var b=1,a=window,g=a.location.hash,d,h="canary=",f=a.$CJ,e=f.c;try{if(a.self==a.top)b=0;else if(e&&(g.indexOf(h+e)>-1||g.indexOf(h+unescape(e))>-1))b=0;else if(f.s)try{b=a.parent.$CJ.p!==f.p}catch(c){}}catch(c){}if(b){try{a.top.location.replace(a.location.href)}catch(c){try{a.top.location=a.location}catch(c){}}d='<plaintext style="display:none">'}else d=unescape("%3C%73")+'tyle type="text/css">body{display:block !important;}</style>';document.write(d)};
//]]></script>If you created a new AppleID with the new email address, then that is exactly what will happen. Purchases are permanently tied to the AppleID you used when buying them. Anything tied to an old(er) AppleID is forever tied to it and you need that older AppleID's password to update those apps.
Your only option is to buy those apps again, paying a second time, to get them under your new AppleID.
For future reference, if you just wish to change the primary email you are using for your AppleID, you should log in to the "Mange your AppleID" section at https://appleid.apple.com and just edit the primary email address for your existing AppleID. -
How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play? At the moment, each artist in the album is being separated and I can't play them together. For example, to play the Halo 2 Soundtrack, Hoobastank, Breaking Benjamin, Nile Rodgers, etc. are some of the artists featured. However, in the Albums category, they are each separate choices. I want to play them all together, but can't. Is there a way to do that?
It sounds like the album metadata is incorrect, or differs from song to song in iTunes. Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number. For the Halo 2 Soundtrack, metadata should look like this:
Song: <Song Title>
Artist: <Song Artist>
Album: Halo 2, Vol. 1 (Original Soundtrack)
Genre: Soundtrack
I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names. Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow. -
I use iMovie almost everyday for Youtube videos. I have nothing in my imovie except the 5 clips that I'm editing now. I have all my media on an external hard drive and delete everything after I'm done with ( I empty all trash cans). My iMovie is now skipping when I try to edit and then the clips just go to a black screen and I can only hear the audio, this has been going on for a week and I don't know what to do?!? Any help?
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly. -
"Unauthorized Host" error when you try to connect to the admin server
"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P> -
when I try and edit or view my photos the screen goes black but has the options at the bottom and the bar at the top. will someone please help??
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
file:///.file/id=7873307.718I downloaded LR for MAC when my free trial ended. But - I get a "renew your membership to reactivate the develop module" when I try to edit images. Help!
If you purchased the Perpetual Licensed version of Lightroom and received a 24 numeric serial number you will have to download the correct version from the link below.
Before doing the new installation you will have to uninstall the existing version from your computer (it is the Creative Cloud version) since it is requesting you to "renew your membership" . This process will not interfere with your Catalog file, Preferences or your personal files, it will just remove the existing application. Both versions are the same application just a different download and activation process.
Reboot your system then run the install of the Perpetual License download and input the serial number to activate. Things should be fine.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7 -
Error when I try to edit a Page
I successfully added the In Context editing code throughout
mu site but when I try to edit the site I get the following error,
I tried editing in different browsers and received the same error.
Internal Server Error
The server encountered an internal error or misconfiguration
and was unable to complete your request.
Please contact the server administrator,
[email protected] and inform them of the time the error
occurred, and anything you might have done that may have caused the
error.
More information about this error may be available in the
server error log.
Apache/1.3.33 Server at www.thewildinstitute.com Port 80
The site is:
http://www.thewildinstitute.comHello shanij,
The behavior with your server is similar to this thread:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=82&catid=859&threadid =1414213&enterthread=y
The difference being that the HEAD response from your server
is 500 Internal Server Error. InContext editing uses HEAD HTTP
requests to test for the existence of the draft page. If no page
exists, InContext Editing should receive a 404 Not Found response
from your server. Your server is responding with a 500 Internal
Server error.
Your server is responding with a 500 Internal Server error
when you navigate to any page that 'doesn't exist' on your site.
For example, if you simply go to
http://www.thewildinstitute.com/example.html,
you'll also receive the 500 Internal Server error.
It could be that the HEAD HTTP request method is disabled, or
the HEAD HTTP request method is enabled on your server and simply
not functioning properly. In either case, please contact your
hosting provider to fix this configuration problem.
Here is some more information:
http://www.adobe.com/go/kb406749
Best regards,
Corey -
Iphoto crashes when I try to edit existing (old) slideshow.
iphoto crashes when I try to edit existing (old) slideshow. If I create a new one I can edit them ok, it seems to be older slideshows I have the problem with. I am happy to delete slideshow but even if i try to right click I just get whirly wheel of death then need to force quit. Am running Maverick and latest version of iphoto software...
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Hi,
When I try to view Excel in browser I got error We don't know what happened, but something went wrong. When I try to edit file is ok?
I try to below thongs but still i have problem:
http://sureshpydi.blogspot.in/2013/05/sharepoint-2013-excel-services-we-dont.html
http://spbliss.blogspot.com/2014/07/we-dont-know-what-happened-but.html
https://social.technet.microsoft.com/Forums/sharepoint/en-US/37fd62ce-9278-491a-92ec-4f27f70c6df4/error-in-communicating-with-excel-calculation-services
I will very gratefull for help wtih this issue.
RegaHi,
Before re-creating I found once more error in ULS logs, maybe it help?
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ai2u8 Critical
There was an error in communicating with Excel Calculation Services http://SERVER:32843/38ba6b16a9374cb7a0a44905b6986df3/ExcelService*.asmx exception: We don't know what happened, but something went wrong. [Session: (null) User: ].
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
SharePoint Server
Logging Correlation Data
xmnv Medium
Result=Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession+RetryException: RetryException ---> Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSessionException: We don't know what happened, but something went wrong.
---> System.ServiceModel.CommunicationException: Error in deserializing body of reply message for operation 'OpenWorkbook'. ---> System.InvalidOperationException: There is an error in the XML document. ---> System.InvalidOperationException: Instance
validation error: 'InteractiveReportRoundtrip' is not a valid value for global::Microsoft.Office.Excel.Server.Host.ExcelServerFeature. at System.Xml.Serialization.XmlCustomFormatter.ToEnum(String val, Hashtable vals, String typeName, Boolean
validate) at Microsoft.Xml.Serialization.GeneratedAssemb
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
abrf Medium
ServerSession.HandleRetryException: Caught a retry exception from server http://SERVER:32843/38ba6b16a9374cb7a0a44905b6986df3/ExcelService*.asmx [id: ea4913c4-46fd-42dd-8cb4-d01b04ebc9e3]. EcsSessionId: RetryCount: 0, WebMethodName: OpenWorkbook,
HitWrongEcsRedirect: False, LastWrongVersionEx is null: True
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
ServerSession.HandleRetryException: Got a retry exception, but the server is not in a state where we're allowing failover. re.InnerException: Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSessionException: We don't know what happened, but
something went wrong. ---> System.ServiceModel.CommunicationException: Error in deserializing body of reply message for operation 'OpenWorkbook'. ---> System.InvalidOperationException: There is an error in the XML document. ---> System.InvalidOperationException:
Instance validation error: 'InteractiveReportRoundtrip' is not a valid value for global::Microsoft.Office.Excel.Server.Host.ExcelServerFeature. at System.Xml.Serialization.XmlCustomFormatter.ToEnum(String val, Hashtable vals, String typeName,
Boolean validate) at Microsoft.Xm...
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...l.Serialization.GeneratedAssembly.XmlSerializationReaderIExcelServiceSoap.Read10_ExcelServerFeature(String s) at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderIExcelServiceSoap.Read17_OpenWorkbookOutParameters(Boolean
isNullable, Boolean checkType) at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderIExcelServiceSoap.Read254_OpenWorkbookResponse() at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer54.Deserialize(XmlSerializationReader
reader) at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events) --- End of inner exception stack trace --- at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader
xmlReader, String encodingStyl... 9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...e, XmlDeserializationEvents events) at System.ServiceModel.Dispatcher.XmlSerializerOperationFormatter.DeserializeBody(XmlDictionaryReader reader, MessageVersion version, XmlSerializer serializer, MessagePartDescription returnPart, MessagePartDescriptionCollection
bodyParts, Object[] parameters, Boolean isRequest) --- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Dispatcher.XmlSerializerOperationFormatter.DeserializeBody(XmlDictionaryReader
reader, MessageVersion version, XmlSerializer serializer, MessagePartDescription returnPart, MessagePartDescriptionCollection bodyParts, Object[] parameters, Boolean isRequest) at System.ServiceModel.Dispatcher.XmlSerializerOperationFormatter.DeserializeBody(XmlDictionaryReader
reader, MessageVersio... 9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...n version, String action, MessageDescription messageDescription, Object[] parameters, Boolean isRequest) at System.ServiceModel.Dispatcher.OperationFormatter.DeserializeBodyContents(Message message, Object[] parameters, Boolean isRequest)
at System.ServiceModel.Dispatcher.OperationFormatter.DeserializeReply(Message message, Object[] parameters) at System.ServiceModel.Dispatcher.ProxyOperationRuntime.AfterReply(ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime
operation, ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCall...
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...Message methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap.OpenWorkbook(CommandParameter parameter,
OpenWorkbookInParameters inParameters, String& workbookId, OpenWorkbookOutFlags& outFlags, OpenWorkbookOutParameters& outParameters) at Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession.<>c__DisplayClass2.<>c__DisplayClass4.<OpenWorkbook>b__1(IExcelServiceSoap
excelService) at Microsoft.O...
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...ffice.Excel.Server.CalculationServer.Proxy.ServerSession.WithExcelService(Func`2 method) at Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession.<>c__DisplayClass2.<OpenWorkbook>b__0(CommandParameter parameterDelegate)
at Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession.<>c__DisplayClass1d9.<ExecuteWithSecurityContext>b__1d8() at Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession.ExecuteWithSecurityContext(Boolean
forceRevert, CoreWebMethod coreWebMethod, CommandParameter parameter) at Microsoft.Office.Excel.Server.CalculationServer.Proxy.ServerSession.ExecuteWebMethodCore(WebMethodType webMethodType, WebMethodBehaviorAttribute webMethodBehavior, CommandParameter
parameter, CoreWebMethod coreWebMethod) --- End of inner ...
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22* w3wp.exe (0x27DC)
0x262C
Excel Services Application Web Front End
ajr3x Medium
...exception stack trace --- 9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Browser
aeh11 Medium
EwaState.OpenWorkbookAndUpdateState: errors occurred while trying to open the workbook, [MessageId: InternalError, MessageIdHash: -1100324317]
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Excel Calculation Services
gwv1 Medium
MossHostFileLoader.GetCloseUri: parent folder/list url = /sites/Raporty for file = File.xlsx
9b5ddd9c-e6db-709f-391c-74bc9b8c087e
01/07/2015 10:14:56.22 w3wp.exe (0x27DC)
0x262C
Excel Services Application Browser
3k9g Medium
ExcelWebRendererInternal.RenderControl: Finished rendering internal EWR
9b5ddd9c-e6db-709f-391c-74bc9b8c087e -
HT4939 My garage band app crashes when I try to edit a song.
My garage band app crashes when I try to edit a song. This happens several time on a variety of songs. I turned off my apps, deleted and reinstall the app, turn off my ipad, did a hard reset, and took it to the Genius Bar. Still having problems. It's annoying because I have to re-record a song.
I could always use more storage. I only have a 16 gb ipad mini with retina display. Current, I only have 2.3 gb left. Maybe that might be. The problem. This problem only happens on newer projects. The old ones are fine.
I don't do anything different from old projects to new ones. I use the iRig adapter to plug my bass guitar into the iPad when I'm laying down bass tracks. I use the drums and other instruments from the garage band and use the iPad mic to record my guitar parts (I only have an classical guitar without pickups).
I don't use 3rd party apps or loops. Nothing is really looped. I recorded everything straight through. From drums, I don't loop. I change the beat every so often and do different fills. So if I make a mistake somewhere I would re-record everything from scratch. Same goes for the other instruments.
I appreciate your time and support with my problem. :). -
What controls the color of the cursor that selects text when you use the "Edit Document Text" tool?
Hi, I have had a student ask me a question I cannot answer: what controls the color of the cursor that selects text when you use the "Edit Document Text" tool?
I have only seen it appear as a black semicircle over each letter, but at a different computer in our training facility, this same tool appears as an aqua-green highlight.
Is it a preference I never noticed? Thanks for any info.What version of Acrobat? What operating system?
-
When I try to edit my payment method it keeps saving the old card and not updating to the new one?
When I try to edit my payment method it keeps saving the old card and not updating to the new one?
You likely need to change the default application(s) assigned for opening files to point to the new ones. HOw you do that depends on which operating system you have. If you search Google you should be able to find out how to change the default programs for different files.
-
hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.
Maybe you are looking for
-
I will include a post of my config. I have the clients connecting through the VPN tunnel on the 180.0.0.0/24 network, 192.168.1.0/24 is the primary network for the office. I can connect to the VPN and I do recieve the correct address assignment. I be
-
When I downloaded Creative Cloud it made me set up an account, download, verify my email. Now when I go and double click or right click and run, or right click and run as an administrator, Creative Cloud does nothing.................. I just want to
-
Best way to connect MacBook to Xserve?
What is the best (fastest data transfers) option I have to connect two MacBook Pros to an Xserve?
-
I upgraded to 4.0 Firefox and my Norton's toolbar is gone - how do I get it back?
I need my Norton's toolbar back, please help me. I am type medical transcription from home and am constantly searching for medical terms, medicines, and procedures. I do not go on any website that is not rated from Norton's. How do I get the tool bar
-
Help needed Converting MSSQL function to PL/SQL
Hello, I have the following MSSQL code which I need to migrate to Oracle 10g. The problem I am having is the MSSQL code creates a temp table as the return type and I am unsure how to get the same functionality in PL/SQL. MSSQL CODE_ CREATE FUNCTION [