Filmstrip doesn't pop up on mouse over...

Only just started happening, when you hover the moue over the little up arrow icon on the filmstrip bar it just flashes brighter for a second and stays resolutely where it is! I can click the icon and the bar will expand as expected, clicking it again collapses the bar as expected. Only thing to note is the little icon on all the other bars shows as a mottled effect when collapsed but the filmstrip shows clean white!

Hey answered my own question :-) it's a double click that sets whether auto pop-up on mouse over works or not - I must have accidentally double clicked the filmstrip bar at some time!! Hope this helps if someone else has this problem... :-)

Similar Messages

I need to attach a pop up or mouse over image to test. How do I go about it?

I need to attach a pop up or mouse over image to text. How do I go about it?

Use Tooltips or CSS Disjointed Rollovers.
http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How do i change or hide the dialogue box that pops when i mouse over a link?

i'm using adobe acrobat standard.
i'm editing a document and adding links into the PDF to my website.
i prefer only to show the "hand/pointer" when you mouse over the link.
is there a way to:
a. hide the dialogue that pops up when you mouse over a link?
b. is there a way change the dialogue that pops up when you mouse over a link (e.g. Click Here versus the actual URL).
Much thanks,
KK

Moving the discussion to Creating, Editing & Exporting PDFs forum.
Thanks,
Atul Saini

If I have a box with a title strip at the bottom, how do I make the strip pop up on mouse over

So I am building a website for my company and Ive hit a brick wall on something that I know I could make work correct but I dont have the time and dont want to contiue to waste time experimenting. I have been using adobe flash and I know how to use it but not on this level I guess, I have got it to work in some cases but seems like it would be the worst to edit if needed.
Im trying to make a box (button) that has a visible title strip at the bottom of it. When you mouse over the title slides up and it shows information, which you can click to go to a link or mouse out and it will go back down. Ive been trying everything and something always seems to not go just right. I need it to be fluid, for I will be doing it to 6 boxes in a row on the landing page of the site. Please let me know if anyone knows what Im talking about or can help in any way possible! There is an example on the sony site near the bottom with 4 boxes. http://www.sony.com/index.php
Also, If anyone were to know the answer to the Q above, What would be the best template to start in for this?
Thanks, T

Consider something like a JavaScript library for your tabs. You can do it yourself with standard jQuery effects easily (http://learn.jquery.com/effects/intro-to-effects/) or even use something premade as a wrapper if you really choose like jQuery UI (http://jqueryui.com/toggle/). Simple things like revealing content via a tab should be done in a modern way.
The content of the tabs can be SWFs if you really have some serious animations/etc they can exist inside there.

Pop up of some comment on mouse over to a particular component

I have a column chart which display revenue for different products. I want to dispaly som comment on mouse over to a particular product. I have tried implementing it using a labels and dynamic visibility, but here in this solution I am facing problems due to default value. By default a label (comment) for a first product is displayed. I want a comment to be displayed only on mouse over.
How Should this be implemented. Is there any other way to show pop ups on mouse over.
Thanks
-Anamika
Edited by: anamikajain21 on Nov 12, 2009 10:06 AM

Hi
You may wish to take a look at Anil's example here:
http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html
Regards
Charles

LR 1.3: Some Hidden Panels Don't Auto-Reveal on Mouse-over

I'm generally pretty pleased with what's new in 1.3, but I have found one bug.
I often work in the Library Module with the left-hand panel closed, and I'm finding in 1.3 that it doesn't auto-reveal on mouse-over - I have to click the little triangle to bring it out. In other modules it works as expected.
The top panel (Module Picker) misbehaves in like manner in all Modules.
Right-hand panel and Filmstrip work just fine in all modules.
I'm using a Mac Pro with Tiger 10.4.11.
Anyone else seen this?

Have you right-clicked the arrow and set it to auto show and hide?

Mouse-Over Labels sometimes truncated (bug fix requested)

Hello,
In both Xcelsius 2008 and all subsequent fixes, the Mouse-Over labels are sometimes truncated. It happens when I have a text category that could be translated as a number. For example, if I name a category "1E" ("1E" is a type of problem that our department is tracking) then when I hover the mouse over the pie chart it will just say "1" as the category name. "1A", "1F", etc work which would lead me to believe that it perceives "1E" to be the same as the exponential 1*10^1, which is why it is showing "1". It happens even if the categories are specified as text. I think this is a bug that should be addressed in the upcoming SP2.

Hi,
   What version of Xcelsius and LiveOffice do you have in place?
   Also, did you actually raise an SAP ticket and recieve an confirmation from Support Engineer (via ADAPT) that a developer will look into it last year? Please note, nothing will get fix unless it is logged under the proper channel.
   From what I can see, this is the only relevant ADAPT similar to yours (KBArticle 1403226 - See below). Although this doesn't mention anything about Mouse-Over Labels. Hope it helps.
Symptom
Character 'e' which behind the numbers (like 1e) will be lost after refreshing Live Office objects
Reproducing the Issue
Create a table in SQL server, add some columns with nchar(10) type
In this table, add some records with value like '1e', '1389e'
Create a Universe based on this table
Create a Webi report based on this Universe
Create a Live Office object based on this Webi report
Create an Xcelsius dashboard, and use Spreadsheet Table to show this Live Office object
Choose 'refresh on load' or add a refresh button to refresh this connection
You wiil find the character 'e' which behind the numbers (like 1e) will be lost
(For detail information about the reproduce steps, please refer to attached doc with some screenshots)
Cause
The issue has been identified and logged under Problem Report ID ADAPT01296829 (Xcelsius side) and ADAPT01290988 (Live Office side)
Resolution
Apply fix packages at both Xcelsius and Live Office sides to fix this issue:
Live Office FP2.3 or SP3
XCelsius X5 LAFix2.0.3 or Xcelsius SP3
Regards,
Ken

Acrobat DC - Mouse over page controls cover content

I don't like the new page controls that pop up on mouse-over the lower 1/4 of the window.
I was content with them in the top menu, and I don't mind if they move, but here they cover a fair bit of content, and when there is not a second page, there is nowhere to scroll to in order to try to get my content out from under it. In addition, there is a 5-second delay even after the mouse is out of range before the controls disappear. How am I supposed to get the information I need in order to see Paul Blart: Mall Cop 2???
I have noticed that I can drag these controls out of my way, but I'd prefer to be able to dock them somewhere off-document, or have them instant on/off as the mouse moves out of that screen area.
Thanks, and I hope your efforts to see Paul Blart: Mall Cop 2 are successful!

Thanks Eager Beager! I thought that button was for something else.
Appreciate the help.

Showing help text of controls when mouse over connector

I'm working with a system where we have decided to use input clusters for all data to all vi:s. These clusters are saved as strict type defs.
Our idea for documentation so far has been to write a description of what the vi does in the vi description, and describing the indata by documenting each element in the input clusters type defs.
This works very well for documentation printing purposes. However, we cannot see the descriptions of the indata in the help pop-up when mouse-over the vi.
Does anyone know a way of getting the documentation of the wired inputs to a vi when mouse-over the vi?
Regards
//Martin

Do you want to (1) see the help info (description and tip) for the cluster when you're on the front panel of the VI that uses it, or (2) do you want to see the help info when you're on a diagram of a calling VI using the VI with the cluster as a sub-VI?
1. In LabView 6.1 or 7.0, you will see the help info for a strict type-def control on the front panel of a VI that uses it. I saved a cluster as a strict type-def. I added description and tip for the cluster itself and for individual elements within the cluster. Then I added the cluster to the front panel of a VI.
In either version 6.1 or 7, I can see the help info:
I can see the description of the cluster or the individual element (depending on where the mouse is pointing) whenever I have context help open (Ctrl-H
to toggle). I can see the tip for the cluster or individual element if the operate tool is selected.
After I added the strict type-def control to a VI, I went back to the control editor and modified the description and tip, then updated the control on the VI and saw the new info.
2. When you're on the diagram of a calling VI using the VI with the cluster as a sub-VI, the only help info (description and tip) available is what you entered for the sub-VI. You can't see the help for the individual controls on the sub-VI unless you open the sub-VI. On the VI with the cluster, you can cut and paste help info from the cluster to the VI. On the diagram of the calling VI, with the wiring tool selected, you can see the name of the sub-VI terminal, but not the help info for that terminal.
Seeing the help for the individual control of a sub-VI when you're wiring it sounds like a good idea to me. Maybe in LabView 8?

Mouse-over pic A to make pop up pic B ...

Hi there!
Could need a quick solution for this, cause my (too) limited HTML knowledge doesn't help a bit ...
I have a permanent picture A which, while mouse-over, should make picture B pop up.
A mouse-over at picture B area (which is again invisible then) should make picture C pop up, which is on the same location as picture B.
A mouse-down on that poped up picture C finally should perform a switch to another html page ...
See this image for better understanding: www.manscha.de/TRANSFER/screen.JPG
How can I manage this with Dreamweaver???
Thanks a lot —
Klaus

CSS Disjointed Rollovers tested and work in IE6, 7, 8, 9, Firefox, Opera, Safari & Chrome.
NOTE: CSS rounded borders and shadows are NOT supported in pre-IE9 browsers.
You can use the code from any demo on my site. And if you're inclined, make a donation through PayPal.
http://alt-web.com/Donate.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Pop Up Text in an applet on mouse over event

Can anyone help me to design a pop up text message to be displayed in an applet on moving your mouse over a particular control. Plz. Its urgent

To show a pop-up use javax.swing.Popup. Add a mouse listener to button. When mouse enters the button pop-up shows and when mouse exited the button, pop-up disappears. This pop-up is capable of displaying simple message to any swing component. Sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
* @author mrityunjoy_saha
* @version 1.0
public class AppletWithPopup extends JApplet {
    private Popup popup;
    private JButton button;
    private JLabel message;
    @Override
    public void init() {
        setLayout(new FlowLayout());
        button = new JButton("Hello");
        message = new JLabel("This is a JLabel. It can be any swing component.");
        button.addMouseListener(new MyMouseListener());
        add(button);
    private class MyMouseListener extends MouseAdapter {
        @Override
        public void mouseEntered(MouseEvent e) {
            System.out.println("Mouse entered.");
            PopupFactory factory = PopupFactory.getSharedInstance();
            popup = factory.getPopup(AppletWithPopup.this, message, (int) button.getLocationOnScreen().
                    getX() - 20, (int) button.getLocationOnScreen().getY() + 40);
            //popup = factory.getPopup(AppletWithPopup.this, message, 50, 10);
            popup.show();
        @Override
        public void mouseExited(MouseEvent e) {
            System.out.println("Mouse exited.");
            if (popup != null) {
                popup.hide();
}If you are talking about alert box (where some message can be displayed), in above example instead of javax.swing.Popup use javax.swing.JOptionPane. In case you are using JOptionPane, make it visible in mouseEntered() method and hide it in mouseExited() method.
Thanks,
Mrityunjoy

How do you create the 'cream pop-up info text boxes' that appear when you hover mouse over?

Hi people,
I really need to know how you create the 'cream pop-up info text boxes' that appear when you hover your mouse over an object on a webpage (and often in any program e.g. Photoshop) for more than a second. I need to know because the logo on my website is the navigation tool used to return to the homepage. It is always found in the top left so the user can always click it to return.
The only problem is im the only one who knows that when you click my logo, you return to the homepage. I need one of these 'cream info boxes' (forgive my lack of knowledge) to appear so the user will figure it out.
Thanks for taking the time to read my question...

Using your code it should look like this where title attribute is in red:
<div id="apDiv2"><a href="index.html"><img src="divs_dw/jtgd_logo_trans.png" alt="jtgd_logo" title="your description goes here" width="176" height="163" /></a></div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Mouse-over Text Viewing doesn't work

When I go to my hosting company's webmail site in Internet Explorer, I can run my mouse over an e-mail subject listing and the first few lines of that e-mail will show up without clicking on the link. When I do it using Safari, nothing pops up so I have to click on each message to see any of the text in the e-mail. (Same thing with Firefox, by the way.) Is there anything I can do, or is it the website's fault (and if it's their fault does anyone know what's wrong)? I have tried both enabling and disabling pop-ups in my preferences, to no avail. I'm pretty sure it's not a pop-up thing, because it's not a new window that opens, rather it's like a flash thing appears.
One thing I noticed, when I mouse-over an e-mail subject in IE, everything works fine. But when I mouse-over in Safari, nothing opens AND the status bar shows the following text:
Run script "openmsg('21','Inbox',%20'message')"
I tried searching the forums and knowledge base but couldn't find anything. Thanks in advance!
Mac OS X (10.4.8) Macbook Pro

Hi!
Ok, now I'm a little bit confused
For testing, I deleted all Mouse InputDevices out of my xorg.conf. In ServerLayout I specified the following:
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Dell Notebook Keyboard" "CoreKeyboard"
EndSection
Now it works all perfectly.
On my laptop I have synaptics touchpad and a external usb wheel mouse. Is it deprecated to specifiy all devices (for example mouse devices) in xorg.conf? I'm consfused, because I thought the synaptics touchpad is a special device which needs complicated configuration ;-)
Best regards,
Flasher

Mouse over pop up - not sticky note-can it be done?

I am curious if there is a feature in Acrobat where by mousing over an area you can get a pop-up that provides information about the area you have moused over - much as you get when you hold the mouse over an item in the toolbar. I have looked and tried but, other than sticky notes-which are not really what I want - I have found nothing.
Is that possible in Acrobat?
Would appreciate any info or ideas.
Joe

You can use the button tool to create a button and in the properties add a tooltip. That will show on mouseover.
Be sure and set the properties with no fill or border so it won't be visible.

Display of IPTC description during mouse-over in filmstrip

Windows XP SP3, LR3
When you move your mouse over an image in the film strip, you get a temporary popup showing the IPTC title and description fields from the image.
Unless I have missed something, this behavior can not be changed.
This can be a problem when the description field is VERY long. It can cover up a significant portion of the screen and can be very annoying.
I have a number of pictures where I have a VERY long narative about that particular picture. It is annoying as I move over these images in the filmstrip and see huge popups momentarly appear.
There should be some way to either disable this feature, or at least limit the amount of description field that is shown.
Gary

Thank you! I should have thought of that myself. Now that I think about it, I knew that what was displayed there was controlled by what you have set in View options.
Gary

Filmstrip doesn't pop up on mouse over...

Similar Messages

Maybe you are looking for