Filmware problems, drag & drop doesnt work anym

Hiya

I have a problem with connecting my MicroPhoto to load the battery and add new music. I haven't had this before. I connected the player on the same way I always do and I got this 'recovery' screen. I could choose for a few options like: Clean, reboot, install filmware. I disconned and connected a few times but I kept getting it. Also the creative media explorer didnt recognise the player so I couldnt get in the harddisc of the player. Then I decided to install new filmware. I deleted to old filmware and installed the new one (my computer said it was the exact same version) Finally I could get into the harddisc again, but then I had a new problem. I couldn't add any music/files by just dragging and dropping. So I disconnected and connected the player, but its still the same. I can, however, add music with the other way (adding media).
Somehow the new filmware has blocked the option drag & drop.
What do I do with this?

How do you mean one direction? Do you mean making one map and put all the songs in there? I can not add songs in a map. I keep on getting the same message, really bizar.

Similar Messages

PS11 Organizer. how 2 move 1 file(folder) into another? drag & drop doesnt work...

as it does in Win. also how can i create a new file/folder to put other files/folders into. ex a new folder names "Flowers" then put all the other files that contain flowers such as folder "red roses" into the "main" file of Flowers. Cant figure it out even using the book The Missing Manual. Thanks sara

It sounds like this question is for Photoshop. This is a Flash forum. In any case, is your question about real folders on your computer, or server, or are asking about the files and folders in the "Layers" panel? Or, is your question about using the Library panel in Flash?

Image drag drop not working in scaffholding. Does it require soem setting?

image drag drop not working in scaffholding. Does it require soem setting?

Hello Manoj,
The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
     1. if you access page properties from side kick you will see how this page is configured using target template and target path
     2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
     3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
     4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
     5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
     6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
Thanks,
Pawan

Downloaded iTunes 9...but the Home Sharing "drag and drop" doesnt work

I just downloaded iTunes 9 to my ASUS laptop and..well im trying to transfer some of my other library to this computer using the home sharing..but the simple "drag and drop" to add from the shared library to yours doesn't work at all. I tired re-installing iTUnes but it still doesnt work. Help!

Okay, FWIW I just solved this on my machines...was tearing my hair out too!
Drag/drop and settings/import buttons are enabled only when the shared library is a yellow icon, and not a blue icon. So, what's the difference?
A blue icon indicates just plain vanilla sharing--no drag/drop or import is allowed. This type of sharing is enabled by turning on "Look for shared libraries" and "Share my library on my local network" in preferences on both machines.
I did this and signed in under the same account on both machines but still only got the blue icon and couldn't drag/drop or import. Then I discovered it (and felt pretty dumb that I missed it).
Make sure you go to the Advanced menu option and select "Turn On Home Sharing", and sign-in. Once you do this, you should get the yellow sharing icon and things will work smoothly.
Again, just turning on sharing in preferences and signing-in (under the Store menu option) will not do the trick. You need to enable home sharing through the Advanced menu option.
Hope that helps!

Problem: Drag&Drop over HTML-Elements does not work

Hello everybody,
I developed some sort of Clipboard, which consists of a canvas, on which you can drag around some customized components. These components consist of a panel, in which there is an mx:HTML-component and a text area.
The problem is that clicking into the panel-header area and dragging the component around only works as long as I the mouse pointer does not touch the mx:HTML component. This means, that when dragging the component over the region where its own(!) mx:HTML-component is located, the drag action is terminated. When the component is dragged over another components mx-HTML part, the drag action is also terminated.
Why does this happen?
If source code is needed, just ask and I will upload an example.
Kind regards,
Sebastian

what if u hit design mode
and then switch off the design mode
sometimes this workaround helps
try contacting the basis people and make sure u havent installed the lates gui or something.
somethimes during upgrade or so this functionality doesnt work
i face the same issue.

Strange Problem Drag & Drop Between Lists

In the following code, drag & drop is set to copy objects, but when more than one instance of an item exists, only the last item (highest data provider index) item can be selected. Any idea why this is happening, and how to correct this?
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="init();">
<mx:Script>
 <![CDATA[
 import mx.collections.ArrayCollection;
 [Bindable] private var srcAC:ArrayCollection = new ArrayCollection();
 [Bindable] private var destAC:ArrayCollection = new ArrayCollection();
 private function init():void{
 srcAC = new ArrayCollection(['Fish', 'Meat', 'Chicken']);
 destAC = new ArrayCollection();
 private function displayData():void{
 trace("****************************************");
 trace("menuList dataProvider:");
 for each(var srcItem:Object in srcAC){
 trace("\t" + srcItem.toString());
 trace("----------------------------------------");
 trace("orderList dataProvider:");
 for each(var destItem:Object in destAC){
 trace("\t" + destItem.toString());
 ]]>
</mx:Script>
<mx:HBox>
 <mx:VBox>
 <mx:Label text="Today's Menu" fontWeight="bold" fontSize="14"/>
 <mx:List id="menuList" width="200" dataProvider="{srcAC}"
 dragEnabled="true" dropEnabled="true" dragMoveEnabled="false"
 allowMultipleSelection="true" fontSize="14"/>
 </mx:VBox>
 <mx:VBox>
 <mx:Label text="Your Order" fontWeight="bold" fontSize="14"/>
 <mx:List id="orderList" width="200" dataProvider="{destAC}"
 dragEnabled="true" dropEnabled="true" dragMoveEnabled="false"
 allowMultipleSelection="true" fontSize="14"/>
 </mx:VBox>
</mx:HBox>
<mx:Button id="b1" label="Reset Order" click="init();"/>
<mx:Button label="Display Data Providers" click="displayData();"/>
</mx:Application>

Hello
Actually I have also face this problem in one of my appliocation so have done some work arround for that.
If we use object of ArrayCollection as 'key-value' (like- {label:'Fish'} ) pair than it work fine.
srcAC = new ArrayCollection([ {label:'Fish'},{label:'Meat'},{label:'Chicken'}]);
In case of
srcAC = new ArrayCollection(['Fish', 'Meat', 'Chicken']);
If we drop same item two times than list is not identify unique item of the list
and if we use objet like- {label:'Fish'} than every item is unique for list.
I m not sure this is right or not but it works fine.
Also we need to set 'labelField' of list as per object.
With Regards
Virat Patel

Drag-Drop not working with JRE 1.6.07

I have a problem where (when using the next-gen java plugin) applets do not appear as drop targets.
In more detail, I have a .NET winforms application, which has a web browser component on it running an Oracle forms application in a Java app. In JRE 1.6u7 you can drag an item onto the applet and it will notify .NET that a drag-drop operation has occurred. In newer versions of JRE (i've tested 6u11 and 6u13) with the "enable next-generation java plugin" checked, this drag-drop no longer works. (instead of a "hand" cursor, you get a "not allowed" cursor).
Has anyone else experienced this issue?
Thanks,
Rich.

Up
No idea ?

Copy/paste and drag/drop not working in Mt. Lion

After two weeks of searching, I can not find the hangup which is causing my iMac 27" 10.8 to stop copy/paste and drag/drop following successfully doing the same shortly after startup. In Safe Mode, it doesn't happen, so I'm wondering how to track down this problem (extension?). I have to restart in order to get it functioning again after a short time of working. There has to be some kind of timing, like a program installed with a time limit which probably was forgotten in Lion and then reared its ugly head in Mt. Lion. Any suggestions for tracking this puppy? Or is there a program I could buy to do so?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Drag & drop stops working when I drag outside the top-level window

I have implemented drag & drop in my application, using the pre-JDK 1.4 approach. It works fine until I drag outside the top-level window, then back in again. My drop target receives a dragExit, but doesn't get a dragEnter when I drag back in. It then gets frequent calls to dragOver - but the DropTargetDragEvent says there are no DataFlavors available.
Is this a known problem with d&d? Is there a known workaround?
Thanks
- rick cameron

I could really understand that it annoys you. I tried it on my machine and the "save as" dialog box is placed correctly. I couldn't pull the box out of the monitor because the menue bar keeps me under it.
Do you have the application frame activated? Try turning it off. "window > application frame"
The problem might be here: The behaviors of the menu bar and dock are adjustable. Go to the system prefs and try playing around with the Mission Control settings. At work I have menu bar and dock on both monitors. At home I set the prefs so that only the main screen has menu bar and dock.
I'm just guessing. Don't beat me if this doesn't help.

Problem drag/dropping photos to other Apps (e.g. PowerPoint).

I just got a new camera (FujiFilm FinePix S5700) and the photos from this camera can't be drag/dropped to other apps. If I try it I get the error message "Quick Time and a Tiff decompressor are needed to see this picture"
That puzzles me because the file info shows the pictures as being jpeg files. If I export the photos somewhere else I can drag/drop them into other apps, but not directly from IPhoto. I have had photos from two other cameras and have not had this problem. Any ideas?

Craig:
Try this test. Import a photo from the camera to the desktop first and then import into iPhoto. Now see if that photo can be dragged into another app. They do have a jpg extension on the file name, right?
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

LR 2.1 & 2.0 ~ DRAG & DROP not working correctly with photos when moving, applying keywords

Today this issue started, originally in 2.0, updated to 2.1 and issue continues.
Issue: DRAG & DROP feature with mouse (or pad on laptop) will select multiple photos, (with CTRL & SHIFT key as typical with Windows machines)but when I try to move them to a different folder, or drop them onto a keyword, it will not work.
Specifically, I select two photos to move to a different folder, the selection work, but when I try to "grab" the selected photos, Lightroom defaults to One Photo, and it will not grab it to move it. However, I can "right click" on the intended folder and can select "move selected photos to folder" and that works. This issue also applys to assigning keywords, and I would assume other similiar actions. I should note, that I can "rotate", assign "labels", "stars", and Keywords from Keyword sets, it just happens with the "Drag & Drop" feature.
Help
The feature works correctly in other Windows programs, so I'm sure it's related to Lightroom and not the mouse.
I have a Windows Vista machine, 3GB RAM 160GB HD, ~ 75% free space, AMD Turion X2 Dual Core 70 Processor. Everything has worked fine up until this morning.
Prior to upgrading to 2.1, I optimized my Catalogue. Everything seems to work fine except this feature.
Help

Drag by the actual image area of the thumbnail, not the surrounding 'fake slide' cell.
That's a feature of Lightroom's grid view. Clicking on image area of thumbnail keeps the multiple selection and makes the image clicked the primary select. Clicking on the outer thumbnail area deselects all but the active image.

ICal to Mail drag & drop not working in OSX 10.10

In a frequently used work flow I dragged an iCalendar entry and dropped it to mail, where it was received as .ical attachment. Sometimes I used copy/paste to insert the entry's data as plain text.
This does not work any more with 10.10. Is there any better way to insert the ical file into an existing (reply-to) mail, without creating a blank invitation first and doing copy-paste there?

Thanks, I have seen this but this process has the same number of steps as the blank invitation - I do not need to close the empty window in your version, but have to locate the .ics file in the finder.
Could it be that a product manager or programmer at Apple did not understand the merits of the old drag&drop and has killed this feature without offering any replacement?

Drag & Drop not working

I can drag a selection of images on my powerbook to my desktop perfectly. However, on my Quad, it won't work. Any ideas?
thanks!

You can only drag&drop images that have previews.
Make sure on your Quad you have previews on.

ITunes music sync problem: "drag & drop" works; "Sync Music" doesn't?

I've been trying to sync a few new playlists of music to my iPhone 3GS with frustrating results.
I'm hoping someone can explain to me what I may be doing wrong.
In the past when I wanted to add new music to my iPhone I would use what I refer to as the "Sync Music" or Music tab method. I would rip the CD, create a new playlist for the album, plug in my iPhone, select it under the Devices list in iTunes then click on the Music tab up at the top of iTunes (I have "Sync Music" checked and "Selected playlists, artists, albums, and genres" checked. I would scroll down through the list of playlists, find the new playlist I created and check the box next to it and sync my phone to add the new music.
This has worked flawlessly for years. Until now.
The last three albums I have tried to add this way will not sync to my 3GS. The music will play perfectly on my MacBook in iTunes. I ripped the music the same way, created the playlists the same way, and I can even get as far as the list of playlists under the "Sync Music" check box in the Music tab. I can see the new playlists in this list, I check the boxes indicating I want to sync them to my phone, but when I click Apply and then Sync, the music never shows up on my iPhone.
I keep every new album I import in it's own playlist, so being able to select which playlists I want to sync to my phone is definitely the method I would prefer to use, but since it wasn't working I tried checking the box next to "Manually manage music and videos" on the Summary tab. This of course disables the Music tab and unchecks the box next to "Sync Music".
I'm not too familiar with using this method to manage my music library, so maybe someone can show me a better way to do this, but with the "Manually manage music and videos" box checked the only way I know to add music to my iPhone is to drag a playlist one at a time from my iTunes library to my phone in the devices list.
This is where I get confused. For some reason the new ablums I ripped, which I was unable to sync the way I am used to ("Sync Music" check box/Music tab method), can be dragged and dropped onto my phone and they are copied to the phone without a problem.
WHY!?
Why, am I able to sync these ablums using this tedious and clunky drag and drop method and yet I'm unable to copy them to my iPhone using my prefered "Sync Music" checkbox method?
If you have any idea why I'm experiencing these problems or if you have experienced a similar problem please let me know.
Thank you.

This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.

Document Drag Drop only works in draft

Hello,
When you attempt to drag and drop a document into a document app it simply says "Uploading" but never does anything. After testing a few things I've discovered that it only works if the page is not published. This is on a published site, not a
team site. If I check out the page and leave it in draft I can upload documents by dragging and dropping.
I have found a few threads with people having the same issues but no resolutions. Anyone have a work around or perhaps a savvy coder who knows a bit of code to toss in to make this function properly?
Thanks!

I can reproduce your problem in my dev box. I think it's kind of conflicting situation. You can only change publishing page when it's in edit mode (or checked out or in draft mode) and that's the behaviour your are getting now. On the contrary, Documents
webpart should allow you to upload documents if you have permission.
However, maybe by design (or you can call it SharePoint bug) when documents webpart is placed inside publishing page, publishing page behaviour overrides Documents webpart - so you can't change publishing page until you goes to edit mode. However, if you
use webpart page, you can drag-n-drop without any issue.
So as far as I understand there's no solution for this unless you use webpart page.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Filmware problems, drag & drop doesnt work anym

Similar Messages

Maybe you are looking for