Filter adapter for SX50 HS

I have read some horor stories about the filter adapter for this camera. They all speak of it coming loose very easily. Can anyone shed some light on this issue? Thank you,   M.
Solved!
Go to Solution.

Dear tnicoson:
Thank you so much for your reply to Grazie, whom I believe likes to hear herself talk regardless of what she says. Her answer was so trite that I felt it didn't deserve an answer.
The reason I asked is that I have some Singh-Ray polarizers and ND filters that are more expensive than the camera. I'm a retired photographer that lugged 35+ pounds of camera gear through life and has found nirvana in this little camera from the point of view of weight. The SX50 HC + a carbon fiber tripod and filters, etc = 4 pounds!!!
Once again, thank you for verbalizing my sentiments.
Be well,
M. 

Similar Messages

  • Adaptive wide angle filter error for iPhone 4s in PS CC

    Hello,
    I have just watched a tutorial on Adobe TV regarding the new adaptive wide angle filter used on pre-stitched panoramas. I open an iPhone pano image. go to filter–>adaptive wide angle filter and in the lower left corner I find – as indicated as being requested to function properly the tut – the name of the camera, the lens and the f-stop with wich the image was taken. The filter does still not draw the automatic line on the corved part of the building I try to improve. Going to correction –> automatic in the upper right corner I get an error message that no matching profile for the iPhone's camera's lens could be found.
    Why that when it is clerly indicated as being 4.28 mm etc already? The iPhone 4S has been here for quite a while and is widely used, so why the error?
    Thanks for any hint!

    Thanks, Trevor.Dennis,
    it did seem to work out for a moment the wayyou suggested: the drag line appered allright this time, but after adjusting the curved line the filter made a fisheye image out of my panorama, cutting off about 20% on each side and leaving a ragged edge remining of a circle.
    I'll keep trying!

  • Records Management   -   Adapter for UCM

    Hi there,
    I am having troubles understanding how the Records Management Adapter for UCM works:
    1. I have installed URM on a separate instance and have defined retention categories there.
    2. I installed the Adapter on a UCM instance and pointed it to the URM instance.
    3. It copied the categories over BUT
    4. Only those categories that allow for non-record items show up in the LifeCycle field as the view of the field does filter out all other categories.
    So I have not figured out how I can make a content item a record. It that possible at all. Or does this set up of
    - one URM instance and
    - a second UCM + Adapter instance
    only support lifecycle management?

    Hi There;
    I am having troubles with the Records Management Adapter for UCM too. Also i am having troubles to defined retention categories and configure the retention schedules too. The documentation is not helping in anything about this troubles. Does anyone knows some better documentations about that?? Thanks a lot!!

  • Prepopulate adapter for organization - OIM

    Dear All,
    I am trying to create pre-populate adapter for organization field.
    End users should be able to see all organizations.
    Administrators should see only the organizations they belong to.
    What API will allow me to check whether user administrator? (belongs to certains group)
    How to filter the organizations and determine which ones to show to adminstrator?
    If you can provide an example this will be very helpful.
    thank you for your time

    Hi! Do you find any solution for this problem?
    Thanks
    Maxi

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

    mini graphics to vga adapter for macbook how to install in windows 7.
    i have macbook with windows 7 operating system.

    Can you be more specific?
    What are you trying to do?

  • Apple dvi to video adapter for macpro working?

    hallo,
    is it possible to use the adapter for the geforce 7300 in the macpro for pal video output? will it work? the apple store lists the adapter only for g5 and mini, but i see no reason, why it shoud not work with the gforce...
    any idea? thank you.
    thomas
    macpro   Mac OS X (10.4.7)  

    I have wondered about that G5 support since others have had bad luck with Nvidia boards and the video adapter. e.g. it doesn't work with the 7800GT, which is a G5 board. All current ATI cards on their web-site show support for it but the MacPro card is not on ATI's site.
    The adapter seems to have disappeared from the displays section of the Apple Store.
    Another option is a VGA to video adapter
    <http://www.ramelectronics.net/html/PC-TVvideoadapter.html>
    It costs more, but does a lot more, and should work with any video card.

  • HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

    Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

    Hi, I can't see why not...
    Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
    http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

  • Can't find FILTER CONDITION for filters or Function_Name for Functions

    In the Data Warehouse 11gr1 views all_iv_xform...
    I can't seem to find the Filter Conditions for filters and function name for functions that are called.
    I have looked at the other views in the documentation for the API's but can't seem to find this information.
    Any body have any ideas where this information is?
    thanks
    greG

    select map_component_id, position, source_parameter_name
    from ALL_IV_XFORM_MAP_PARAMETERS
    where map_component_id in (
    SELECT map_component_id
    FROM ALL_IV_XFORM_MAP_COMPONENTS
    WHERE MAP_ID IN (
    select MAP_ID
    from ALL_IV_XFORM_MAPS
    where MAP_NAME = :p_map_name
    AND OPERATOR_TYPE = 'Filter'
    Using map_component_id and position from above query you can see your filter condition defined in property_value:
    select map_component_name, property_name, property_value
    from ALL_IV_XFORM_MAP_PROPERTIES
    where map_component_id = :p_comp_id;

  • How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

    Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
    BizTalk 2013 and SP 2013 ..
    Regards
    Ritu Raj
    When you see answers and helpful posts,
    please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

    A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
    http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
    There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
    http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
    Regards.

  • Could I have got a new power adapter for free?

    My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
    I read the following on the apple website:
    Additional Information
    Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
    Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
    I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
    Just wondered if anyone could clarify :-)

    As you indicated, it depends on the results of the evaluation.
    Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
    I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
    If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

  • Preferred adapter for VGA? Mini DisplayPort to VGA or Mini-DVI to VGA?

    Which is the preferred adapter for connecting a VGA-only LCD display to the new Mac mini?
    The official Mac mini accessories page <http://www.apple.com/macmini/accessories.html> prominently features the Mini DisplayPort to VGA Adapter.
    However, the Tech Specs knowledge base article <http://support.apple.com/kb/SP505> suggests the Mini-DVI to VGA Adapter.
    I'm sure Mac OS X will work fine with either. But is one more likely to work better with Windows XP using Boot Camp?

    I've come up with my own answer to my earlier question...
    It's the Mini-DVI to VGA adapter.
    I ended up trying both adapters, and got the results I described here: [http://discussions.apple.com/thread.jspa?messageID=9255959].
    Besides the simple fact that the Mini-DVI to VGA adapter is the only adapter that fully worked for me, it's also cheaper.
    Also, from a mechanical point of view, the nuts to secure a VGA cable to the DisplayPort version of the adapter are recessed into the end of the connector housing. This prevented my VGA cable from being able to be properly secured to the adapter--although this might be a defect with my cable!

  • VGA to Video adapter for a late 2004 iBOOK

    I found a free TV and thought maybe i could use it as a larger screen format. so i went searching for cable adapters.
    I did do a search here in the search query box on word search vga to video and results show related to clam shell versions.
    while looking around the Apple web site for a VGA to Video adapter for a iBOOK G4 that shows a CPU speed of 1.2 GHz and a designation of PowerBook6, 5 yes that is how it is written in the System Profiler 'PowerBook6, 5'.
    Using a tape measure the screen itself with out the plastic frame shows a width of 9.5 inches , including the plastic frame shows: 11 and one quarter, that could round off to 12 inch even though it is not at or beyond the point 5 mark.
    The original paper work is some where ?.
    I found a VGA adapter that could possibly work at
    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    yet the wording states: The video adapter cable plugs into the video output port (mini-VGA) built into the back of the computers listed in the compatibility section below.
    Compatible with:
    iBook without an external reset button, eMac, iMac G5, or 17-inch iMac (1GHz) with mini-VGA port.
    does not say much for the laptop.
    There is shown a VGA adapter for the iBook here:
    http://support.apple.com/kb/HT2721?viewlocale=en_US
    yet finding it at the store ???
    if i copy the part number in a search query at the store the results show a Lexmark copy machine.
    I found many DVI adapters at:
    http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY#overview
    And then here:
    http://support.apple.com/kb/TA27124?viewlocale=en_US
    as copied and pasted here:
    The Apple Mini-DVI to S-Video/Composite Adapter does not work with PowerBook G4 (12-inch) computers,
    the one thing i have notice is that no compatibility charts actually show support for the 1.2 GHz iBOOK G4.
    I also see that there are Mini DVI to VGA adapters, Mini ?, does mention pin numbers ??.
    I was wondering if i could crossover the DVI to VGA thru the adapters using VGA and DVI cables, yet pin numbers and compatibility questions still remain.
    Suggestions ?
    Thank you.

    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    The adapter in the above link is the one you need.
    ~Lyssa

  • DVI to ADC Adapter for GeForce 6800 video card?

    Do I need DVI to ADC Adapter for Nvidia GeForce 6800 which I just installed on my G5 to be able to run ADC 23" Cinema off the GeForce 6800 card?
    I want to run a new 30" Cinema and old ADC 23" Cinema from GeForce 6800. I ran the old 23" from the ATI Radeon 9600 Pro
    Thanks,
    Milan

    Hi Milan,
    If the Geforce 6800 does not have an ADC output, then yes, you do.
    You need to check to see whether or not that the card has DVI-I output, as some of the DVI to ADC adaptors use a DVI-I plug which will not fit into a DVI-D output due to the extra pins in the plug.
    Cheers!
    Karl

  • Best Mini Display to DVI adapter for 2011 17" MBP w/no blocked ports!

    I am looking to get a Mini Display to DVI adapter for my 2011 17" MBP.
    +(Preferably it would even be one with a 6' cord.)+
    It is not clear which one I should buy. Apple's (adapter only, no cord), is $30, while I can see others for far less on Amazon.
    I have read that some of these adapters actually block the FW800 and USB ports on either side.
    A blocked, or displaced FW800 port is a deal breaker.
    1. Can someone with a 2011 17" MBP tell me that they have either one of these adapters, or the one with the cord, and that it doesn't block their FW800 port? (I'll pay the $30 (albeit grudgingly) if its the only one that works.)
    2. This may be a dumb question, but the specs on these adapters say that they are capable of 1080p resolution. Would that mean they would work with a 1920x1200 monitor?

    You might want to try the "MBP Display" discussion threads, might be able to find what you are looking for in there or get better support there.
    I don't think I can help very much, but I have the Apple's adapter (no cord) and it doesn't block my usage of FW.

Maybe you are looking for