Filter all images with a specific colorspace

My Canon camera allows me to shoot in sRGB and Adobe RGB.
Question: How can I filter all files shot with Adobe RGB?

As suggested else-thread, the colourspace is not used in Lr, so it isn't a primary piece of available metadata. However, for the purposes of organization, I suppose you would like to know what space an image was in if you were to export the originals as-is. This seems a reasonable request.
You can do this by hand, I suppose, by using a colour label or keyword, and forming a smart collection around that. Not ideal, of course.
Alternatively, I imagine this metadata would be available via the API, and then "searchable metadata" selections might apply. I've done little API coding around metadata, so I'm guessing here.
There are plugins that let you expose and display (but possible not search on) arbitrary metadata, as well. They have been mentioned here before, and are probably on the Adobe hosted plugin location. Not sure if this would help you much, but it is worth a look.

Similar Messages

How to filter all images with 16 BIT colordepth?

is there a way in LR (or bridge) to filter all images that are saved as 16 bit images.
i noticed i have a lot of scanned photos/slides that don´t need to be in 16 bit TIFF format.
8 bit is enough for them and would save me a ton of HDD space (even when most of them are LZW compressed).
but i need a way to find them in my 80000 images database.
so that i can make a further selection which of these 16 bit images i can convert to 8 bit.

>
but this plugin changes a lot in the database right?
Right.
im always a bit fearsome when a plugin changes the database entrys.
Apart from increasing the database file size, I don't think there's
anything to be afraid about. First, the plugins do not do it directly, but
via and SDK provided by Adobe. Second, all the plugin data is stored in
separate database tables, so they don't mess with stock data.

How can I view all images with Safari on my mac?

how can I view all images with Safari on my mac? When I go to pinterest or any stock photo site I can only see some of the images on my mac.

Please link to an example of a page you're having problems with. It should be accessible without a login.

I need to replace a color on my image with a specific color from another part of the image. How?!

I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image. So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is. I need to use a specific color so this does not help me. Does anyone know how to complete the task I am referring to?
Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything. So it's pretty old school...
Any help/feedback is greatly appreciated! Thank you.

Hi brookehelene,
You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
(click on the screenshots below for larger views)
1. Select>Color Range
   (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
   (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
   (in the screenshot below the white areas are selected and black areas are not)
   (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
3. After you press the okay in the color range dialog you'll see the selection (marching ants)
   At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
   to reveal a list and choose Solid Color.
   Then use the eyedropper to sample a color from your image and press ok.
   Change the Blend mode for the color fill layer to Color (top of the layers palette)
4. As you can see a lot has been selected besides the flower.
    To refine the areas of color, paint on the layer mask with the paintbrush tool.
    Use white to add the color or black to subtract the color
    You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
    and press the X key to switch between the two when painting on the layer mask.
Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
To change the color you can double click on the color fill icon in the layers panel.
You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

Safari browser 5.0.6 not displaying all images on a specific site

I have a MAC running on PowerPC G5, with an OS X Version 10.5.8. I am using Safari browser version 5.0.6. I have been using the browser for years with out any problem until last week. All images show up on all sites except on one specific site. When i use Firefox to open this specific site, all images show up normally without a problem.
I have tried different methods suggested online including within this site, but the problem still persist. Can any one assist me on how i can resolve this problem and why images do not show up fully on the specific site when using Safari browser version 5.0.6?

If possible, i can send you the link via email. Please send me your email address so i can send you the URL link.
<Email Edited by Host>

Exporting Images With Only Specific Metadata

How do I export images from Aperture with only specific metadata. Example: I want to export my images with only the copyright IPTC metadata (and maybe the keywords or contact info etc., but I don't want the world to see the EXIF data.
Aperture manual (page 507 I think) says to do this I need to make a separate version with only the metadata I want to appear. Er right? How does one do that then Apple!? I know how to make another version by the way, but how can I switch off/strip the exif, but keep the IPTC? Surely the monment I tick the include metadata checkbox in the Export panel and hit go this EXIF data will be inserted as it is inherent with the file?
Can anyone enlighten me please?
Kevin

Time to hit the Aperture feedback page. If you include metadata, you include the EXIF data.
About all you could do is export with no metadata, import the new 'stripped' file and then lift-n-stamp the IPTC data onto it, then export that.
Ian

How to sort and filter all images when using stacks?

I have a project where all images are arranged in stacks. I have also gone through and given each image a rating or rejected it. Now I want to sort out and display only a certain selection of images, i.e. rejected images for deletion or four star images etc. But the selection filter only seems to work on the stack pick. Can I change this so that the filter works on all images, even if they are part of an open stack? If not, how could I else single out all the rejected ones and delete them? I don't want to break the stacks.

The only current way to do this is via Smart Albums, as there is a checkbox at the bottom of the settings HUD: 'Ignore Stack Groupings'.
Ian
P.S. If you'd like to see this added to the regular search HUD (I know I would), please leave feedback at http://www.apple.com/feedback/aperture.html

Photoshop diplays all images with desaturated colors (Images look fine when opened in other apps)

All of a sudden, when I open any image in Photoshop, the colors appear to be desaturated...In Photoshop only. When I open that same image in Window Picture Viewer, or Quicktimer, or even if I drag the image into a brower window, the colors appear fine. But in Photoshop, something is clearly wrong. Now, I can make color adjustments to the image, but when I save and reopen reopen it in another application, I can see that color changes have been made, but they still don't match what Photoshop is displaying.
The images are RGB image...I've checked the color space setings in Photoshop, and they are the default (Edit > Color Settings: North American General Purpose 2 / RGB: sRGB IEC61966-2.1 / CMYK: US Web Coated (SWOP) V2, etc, etc). I also made sure View > Proof Setup was set to: Working CMYK. I even reset Photoshop to it's default settings (by holding down CTRL-ALT-SHIFT on launching Photoshop)...But the images still appear desaturated when I open them in Photoshop...So, I don't understand how this is still a Photoshop problem...But then again, they look fine when I use any other application on my computer to open them, so it's clearly not an issue with my monitor.
The frustrating thing is, I haven't made any changes to Photoshop OR my monitor (that I know about)...Photoshop has worked perfectly for me for years, and now there's this SNAFU that I just can not figure out.
Any suggestions?
I've included a screenshot below to show the disparity between an image opened in Photoshop (on left) and Windows Picture Viewer (on right):
Photoshop image on left, with desaturated colors...Same image in Windows Picture Viewer on right, where colors appear normal.
Any and all help is much appreciated : )
Best,
-Austin

It's difficult to provide help without knowing your level of color-management expertise, but I think you've helped us some with that in post number 2.
Color management is basically this: Images and devices have certain color characteristics, and these are described by color profiles, sometimes also called color spaces.
1. You should not need to use the Proof Setup at all to view your images on your monitor. When things are set up properly Photoshop shows you accurate color without your choosing View - Proof Colors.
2. A color-managed application like Photoshop will try to show you accurate color on your display by interpreting both the image profile and your monitor profile and transforming the colors accordingly. BY DEFINITION this will look different than other applications which don't do color-management as these just pump the image RGB values directly out to the display.
Thus:
If your monitor profile indicates your monitor has a wide gamut, images with embedded profiles may appear less saturated inside Photoshop than from non-color-managed apps.
If you view images that have an embedded wide gamut profile (such as Adobe RGB 1998 or ProPhoto RGB), Photoshop and other color-managed applications will interpret that profile and the colors will likely appear more saturated in Photoshop than in a non-color-managed application.
It sounds as though the first case applies in your case here.
You can check to see what monitor profile is associated with your monitor through OS settings. I'm thinking, based on the caption buttons in your screen grab, that you've got Windows XP, but rather than go further with that assumption, I'll ask you to verify it first.
-Noel

Filter all photos with flash light ...

Hi,
how can I filter all photos that were made with a flash light?
I only can find ISO or aperture options in the filter pane.
Can I extend the filter pane by own filter options?
Thanks
Konrad

The Filter Pane, at least in CS3, is limited as to how you can arrange your photos by the topics listed.
If you want to list all the pictures you shot with flash you will have to use the Find function (ctrl F) and set the critera boexs to Flash, exists, and Fired. Have not tired this but should work.
You can save this as a collection if you want to refer to it again.

Pse 7 cannot find all photos with a specific tag

I keep my photos in a series of 'nested' subfolders by year and by topic and I have found that PSE7 will only find the first photo with a specific tag, for instance searching for one of our dogs by tag name will find the first time we saved a photo of her. It will not find her in the subsequent 7 years of folders/photos. It is v irritating and I thought that I could do this search previously. Help please. Thanks.

Thanks, but this didn't work; PSE still finds the first photo with the specific search tag.

Change Open With for all files with a specific extension

Hi, I've been using OS X for quite some time, but more recently cannot see how you do the following which is proving frustrating:
* Open Get Info for a file,
* Use the drop down under Open With to choose Other,
* Select an appropriate application that wasn't on the drop down list (in this case Smultron text editor for CSV files),
* Press the Change All button and the drop down turns back to Excel which was the previous default.
So basically, how do I change all files with CSV extension to Smultron when Smultron wasn't in the list of Open With items and I have to use Other from the list. This is repeatable for any file type with any application that isn't listed and is on both my iMac and my work's MacBook. Try it yourself and you'll see what I mean!!
Thanks

Stuart Mchattie wrote:
Thanks NeroWolf,
Your solution does work for that single file, but doesn't change the system wide association of that file extension with a particular application. It is because this works that I believe the problem I am having is uncircumventable and is in fact a bug in the OS. Could anyone else confirm this?
Cheers,
Stuart
It might be a bug. What I found is that the icon does not change unless I log out/in or reboot, even when the app normally puts an icon on the file.
For example if I change an audio file to always open with VLC, it does even though the icon remains as before. However, even though clicking plays the audio with VLC, if I right click the file and select "Open With" it still says iTunes (app) default which is incorrect.
Message was edited by: nerowolfe

AppleScript Needed...How to tell Pages to delete all texts with a specific color?

How to tell Pages to remove all texts with the font size: 13 and color " disabledControlTextColor" from the developer palette?

Sorry John,
Now My question has changed,
Now I want to fill the whole cell with a color , not only the text background
Now I have the Solution. As from the previos post itself I got the Answer. I excuse all of u to put the related question in a new thread.
Please leave it. I won't repeat it.
<af:column sortProperty="Salary" headerText="#{bindings.EmployeesVO1.hints.Salary.label}"
inlineStyle="#{row.Salary>'20000'?'background-color:Red;':'background-color:Orange;'}"
id="c6">
<af:outputText value="#{row.Salary}" id="ot4">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmployeesVO1.hints.Salary.format}"/>
</af:outputText>
fixes my issue.
Ranjith C
Edited by: Ranjith C on Jun 30, 2011 4:46 AM

XPRESS code to find all users with a specific Admin Role

I've been playing around for a while with a way to get a list of all users that have been assigned a particular Admin Role. I have a role for which I want a specific subset of users to be approvers on it, and I want to greate a Rule that will check for people with a particular Admin Role and then return that list as people to be approvers on the role.
I haven't been able to find an easy way to write this code. Anyone run across this before or have another suggestion???
Thanks.

Below is the code to find user based on condition.
<set name='adminList'>
<invoke name='getObjectNames' class='com.waveset.ui.FormUtil'>
<ref>:display.session</ref>
<s>User</s>
<map>
<s>conditions</s>
<list>
<new class='com.waveset.object.AttributeCondition'>
<s>AdminRoles</s>
<s>contains</s>
<s>adminRoleName</s>
</new>
</list>
</map>
</invoke>
</set>
Edited by: Jay on Mar 7, 2012 4:03 AM

Deletes all images with same name

Why is it impossible to simply move images from one folder to the other, rather than having to go through the lengthy and awkward process of exporting them to another folder and deleting the originals. In addition, I just had the unpleasant experience that when there are JPG copies with the same name still in the folder with the original RAW images, the JPG are also deleted.
Image management is still a headache in LR. WQhy not use the Bridge folder structure. Why not simply pick up an image and put it in another folder?

I guess the answer is because that is the way
Adobe designed I/O to the DB--which is the core of LR, and as such is always talked about by them in sacrosanct terms. They did make some small changes from 1.0 to 1.1--but far short of what they should have done IMO.
There are better ways to do things, but Adobe is very reluctant to make substantial changes to LR Library to give it the I/O functionality of Bridge or other 'browser' type applications. My guess is that it is not going to change significantly with respect to this issue any time soon.
I simply do those functions that Bridge does better in Bridge--PS in PS, LR in LR, etc. But, I don't buy into the myth that 'one app does it all' ,so I am not in the slightest disappointed, and I use the best tools out there in different apps and combine them into an effective workflow. If you look at LR in that light, you may be less frustrated.

Export All images with Folder Hierarchy?

Hi,
I use Lightroom all the time but would like to have all my photos available on my Iphone but it is not compatible with raw files. Is there a way that I could export all my images but keep their folder hierarchy intact so I would end up with a duplicate set of folders the same as I have in lightroom but the new set would only contain jpegs?
Thanks
Matt

I do just that with a free tool that has been published on "another" forum.
I'm not so sure if I can put th elink down here, but search for
Preserving Folder Tree Hierarchy using Export Plugins in 2.0
and you'll find a solution. Read the thread to the end, there are a number of improvement that never got into the "official" release.
Cheers, Peter

Filter all images with a specific colorspace

Similar Messages

Maybe you are looking for