Filter all photos with flash light ...

Hi,
how can I filter all photos that were made with a flash light?
I only can find ISO or aperture options in the filter pane.
Can I extend the filter pane by own filter options?
Thanks
Konrad

The Filter Pane, at least in CS3, is limited as to how you can arrange your photos by the topics listed.
If you want to list all the pictures you shot with flash you will have to use the Find function (ctrl F) and set the critera boexs to Flash, exists, and Fired. Have not tired this but should work.
You can save this as a collection if you want to refer to it again.

Similar Messages

How can i set ring tone with flash light?

Dear All,
How can i set old phone ring tone with flash light?
Thanks & Regards,
Jafar Sadhik.K

Hi Friend,
Go to Settings>>General>>Acessibility>> Flash Light, then turn it on.
Hope it helps

IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT

Firefox hangs on all sites with flash content.

Firefox hangs on all sites with flash content. If I disable the flash plugin there is no hanging but obviously no flash content either. I have tried all the suggested actions found in the help sections for hanging and plugin problems. The Honda UK site listed below is one of many I am unable to access with flash enabled.
== URL of affected sites ==
http://www.honda.co.uk/

Chris Campbell wrote:
The key here will be to determine what is different between the machines that work and those that hang. Of all the systems that fail, they are all Windows 7 32bit?
Yep, this issue only happens on Windows 7 32-bit machines, currently 6.
Do you have any 32bit systems that don't fail?
Yep, the most Windows 7 32-bit machines wont fail.
What about hardware, are there similarities here? Attached devices/drivers? Software that is running at the time?
These machines are all from DELL. They all have normal hardware, nothing special. Other machines from same type does not affected. Software: All have standard software distributed via Software-distribution (GPO). Only some PCs have special software, but it is not running. No special drives, too.
Maybe try booting Windows in safe mode to see if it still hangs?
Good idea, indeed - I will try this.
We're definitely interested in what's going on. I'll ask our security and Mozilla folks to see if they have additional clues.
Thanks!
EDIT:
Safe mode: Flash is working! (without disabled Protected Mode!)
I've set msconfig now to: Custom system start and deselected the boxes to load systemservices and system start elements.
So, now windows does a non-safe mode boot but no service or element was loaded except the drivers (right?). Flash is not working with this config!
So, whats the difference between safe mode and normal boot with minimal configuration (see attached picture).
Only drivers will be loaded, right? If so, I can exclude the network and graphics driver as source: graphics driver are updated right now and network was working in safe-mode.
Any new ideas?
Informations about safe-mode

Iphone 4 will not sync all photos with my mac

Iphone 4 will not sync all photos with my mac

I have the same problem as well.....this is the message the kept popping up when I try to sync that photos that i ave already imported to my iPhotos, the fastest way to sync ALL of the photos is to drag the photos on to the desktop, rename the files and then import them AGAIN.
This only happened recently, can anyone help???

Shockwave plugin is set to "Never Activate". All pages with flash still work?

shockwave plugin is set to "Never Activate".
All pages with flash still run automatic.
I just updated Shockwave to 12.1.7
Before doing this the "Never Activate" worked.

Just to make it a little more confusing, Adobe has two similarly named plugins:
* Shockwave Flash (current major version is 17) -- this is the Flash player -- https://get.adobe.com/flashplayer/
* Shockwave for Director (current major version is 12) -- only the rare site uses this one -- https://get.adobe.com/shockwave/
I'm assuming both are set to "Never Activate" because the site wasn't able to detect either of them (see the More System Details link next to your post).
So probably sites are using some other method to play the media. If you right-click it (or Mac equivalent!), do you get a different plugin menu, or the standard Firefox context menu?

How to filter all images with 16 BIT colordepth?

is there a way in LR (or bridge) to filter all images that are saved as 16 bit images.
i noticed i have a lot of scanned photos/slides that don´t need to be in 16 bit TIFF format.
8 bit is enough for them and would save me a ton of HDD space (even when most of them are LZW compressed).
but i need a way to find them in my 80000 images database.
so that i can make a further selection which of these 16 bit images i can convert to 8 bit.

>
but this plugin changes a lot in the database right?
Right.
im always a bit fearsome when a plugin changes the database entrys.
Apart from increasing the database file size, I don't think there's
anything to be afraid about. First, the plugins do not do it directly, but
via and SDK provided by Adobe. Second, all the plugin data is stored in
separate database tables, so they don't mess with stock data.

When taking photos ,with flash the picture ends up with a blue hue?

I have recently upgraded my software to the latest 4.3.5 os. Coincidently I am unable to take decent photos with the flash in low light, instead I get this blue over the whole photograph. Is this right? Beforvthe upgrade I could take goog flashed photos. any ideas?

Disregard, it was the background problem. Can't figure out how to delete this discussion!

HP Photosmart C7280 Power issue with flashing lights

I have seen many posts on the web regarding flashing lights and incorrect shut downs.
http://h30434.www3.hp.com/t5/Other-printing-questions/Photosmart-C5180-Power-Up-Power-Down-Problem-L...
I have tried everything including the "*,#" with "1,2,3" to reset the printer and I have the power cord plugged into a direct outlet, not a power strip, and nothing works. Even if I do get the printer reset and it works, shortly later the lights will start flashing again and I see a blue screen with a power button symbol and some varying code (00729C98) - it varies each time. It flashes after a short time even if I power down correctly - all on its own if plugged in. Is there a defect with faulty part on the control board? If so who do I take it to to get it fixed? The printer is less than 2 years old.

I recently had the same problem with an HP Photosmart C7280, the same model as yours. I eventually managed to get through to HP Technical Support, and they advised that the unit would have to be replaced. I think if you call through, you can get a refurbished model for a cheaper rate.
Before calling technical support, I tried all the steps that have been recommended in various posts, but nothing helped. To the best of my knowledge - and I really tried to get my printer working - the unit is dead.
(Although this is an old post, I came across it when trying to fix the same issue. So, hopefully this will help anyone else who stumbles upon this post. Some other codes my printer showed on the HP "blue screen of death" were B83FCB56, B0075110 and B02BAEC3.)
Regards
Tim

How do you filter for photos with develop adjustments?

I wanted to put this information out there, because it was difficult for me to find an answer to the question of "how do you quickly filter for photos that have develop adjustments?"
Some earlier posts in this forum observe that a smart collection has the ability to filter files wherein "has adjustments" is "true." Yes, it can do that. And it can also add in a "date" parameter for more specific targeting. But it cannot simply say, "in the current folder," or "in the selected folder." And frankly, that's the exact situation when I need to filter down to the files I want: I'm in a folder—typically the current folder that I've just imported—and I've done a smattering of develop adjustments. Now, I want to quickly select just those images for export. Can't be done, not with a Smart Collection, anyway.
But Lightroom is nothing if not deep, and if you approach the problem from a filtering standpoint, it will eventually get you there—but the solution is very non-obvious. Expose the filter bar, with your favorite preset: camera info, default columns... it doesn't really matter. Hover over the header bar and to the far right will become visible the "add column" widget. Add a column. From the pop-up menu on the name will come a long list of options, the second-to-last of which is "develop preset." Once that's in place, click on "custom." Save your current settings as a new preset and give it a descriptive name like "adjusted images."
Now, when you're in your current—or any—folder, just click on "metadata" in the filter bar, and your custom preset will be in effect: any images that you've worked on will be selected. It's a fast, one-click selection.
If there's another way of doing this (keep in mind it's for the selected or current folder only), let me know. It's such a seemingly desirable action that I'm kind of astounded there's no built-in or easy or obvious way to do it... or that no photographer has requested it.

I am honored to have a response from Rikk "MVP" Flohr, and I do readily agree that your approach is one way to approach the issue. It puts the relevant images in a discrete area that is easy to access. However (this is where I look a gift horse in the mouth) I find "sorts" a bit underwhelming in comparison to "filtering." Two problems: first, the sort still does not 'clear your deck' of unwanted images. You still have to squint at the badges and carefully select the range at the top (or bottom). Mistakes can be made (and I would be the first to make them). Second, the sort command is "sticky," meaning that folder will always have that sort unless you undo it. In general, I think most photographers want to see a folder's images sorted by capture time, so they can easily glance to the beginning, middle, and end of the shoot. With my method, once you click out of the folder, the filter is taken away and you're back to normal.
I do understand that Lightroom wants me to flag my images with rankings or stars or colors or dancing beavers or what-have-you. But in this particular situation, that's an extra step. If I've applied development adjustments, it's already done. Why shouldn't I be able to choose "Select Developed Photos" from the Edit menu, right under "Select Flagged Photos"?

Filter all images with a specific colorspace

My Canon camera allows me to shoot in sRGB and Adobe RGB.
Question: How can I filter all files shot with Adobe RGB?

As suggested else-thread, the colourspace is not used in Lr, so it isn't a primary piece of available metadata. However, for the purposes of organization, I suppose you would like to know what space an image was in if you were to export the originals as-is. This seems a reasonable request.
You can do this by hand, I suppose, by using a colour label or keyword, and forming a smart collection around that. Not ideal, of course.
Alternatively, I imagine this metadata would be available via the API, and then "searchable metadata" selections might apply. I've done little API coding around metadata, so I'm guessing here.
There are plugins that let you expose and display (but possible not search on) arbitrary metadata, as well. They have been mentioned here before, and are probably on the Adobe hosted plugin location. Not sure if this would help you much, but it is worth a look.

Photo with bright light

I have a photo with a bright light in backround how do i soften it in elements 10

Review the various ways in this help link to correct the image - http://helpx.adobe.com/photoshop-elements/using/adjusting-shadows-light.html

How do I share all photos with another user on the same system

I'm trying to share all my photos with my wife without copying them over every time I add a picture. is there a way to share all photos?

What version of iPhoto and of the OS? With the current veraion of iPhoto '11 9.5.1 the ony way is an external drive with ownership ignored - http://support.apple.com/kb/HT1198
LN

Pse 7 cannot find all photos with a specific tag

I keep my photos in a series of 'nested' subfolders by year and by topic and I have found that PSE7 will only find the first photo with a specific tag, for instance searching for one of our dogs by tag name will find the first time we saved a photo of her. It will not find her in the subsequent 7 years of folders/photos. It is v irritating and I thought that I could do this search previously. Help please. Thanks.

Thanks, but this didn't work; PSE still finds the first photo with the specific search tag.

Lumia 620 Photos with Flash Washed Out?

May I find out if this is normal or there might be a fault with my phone? I'm running the Amber update on Lumia 620
The photo on the left has flash turned on and it is noisy and off color. Using flash appears to give the photo a washed out / instragram look.
Both photos were taken in natural light.
Attachments:
lumia620_flash_comparison.jpg ‏43 KB

hi mate, i have experienced some of the issues that others have faced here with the Amber update. the Amber update bought even more saturated colouring, and apparently there will be a return to natural colours in the upcoming Lumia Black update, due to land in early 2014.

Filter all photos with flash light ...

Similar Messages

Maybe you are looking for