Filter base on CallerID to VM for only 1 User

Hi
CM4.0.2sr2a - Can I Filter base on CallerID to VM for only 1 User.
Reason: This user gets constant sales calls from certain vendor that they recognize the callerID and don't want to answer their calls but rather have it go to VM

perhaps you can setup a phone template that has an "idivert" button where if the user sees an incoming number they don't want to answer, they can just press the 'idivert' button and the call goes straight to voice mail.
see the following link for more info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ed115.html

Similar Messages

Program installed for only one user

Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
Thanks

Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

Exportto excel in tcode MCAF results in program termination for only 1 user

Hi,
The user is trying to export data from MCAF into a local file. This action results in program termination, its only for his user id. It works for all the user ids the basis guys had a look at it and they said everthing is ok on the authorization side. Im confused, please let me know...
Thanks,
Sukumar.

Thanks for the quick reply!!!
Error analysis
The system tried to access field "OE_OBJEKTTEXT" with type "C" and length
60 in the current program "RMCY9110 " using offset 71.
Partial field access is not allowed with an offset specification that is
larger than actual field length.
How to correct the error
Make the offset smaller with which you want to access the field.
If the error occurred in an ABAP program of your own or an SAP program
that you modified, try to correct it.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DATA_OFFSET_TOO_LARGE"
"RMCY9110 " bzw. "RMCS0F0O "
"OBJEKTTEXT_ERMITTELN"
Thanks,
Sukumar.

Authorization Policy for only search users

Hi all,
I need create a custom authorization policy for only search all users in create request. The users can't see any profile information of others users.
Anyone can help me ?
Regards,
Joel

ViewUser Admin Role can search and view users by default. Since the OES policies for this admin role has action as ViewSearch Entity. In your case, you can write EL's to hide Admin tab which will hide Admin ltab links based on current logged-in user profile.
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABHBFGH

Firefox crashes for only one user on startup, even after reset; safe mode OK.

Current crashes do not even produce crash reports, but two crashes from earlier today did yield:
bp-7013aded-0644-47d8-9967-b48a12141013
bp-cb495f8f-7ae2-4b48-86ff-63b6f2141013
Starting in safe mode shows the same installed plugins and two extensions that are enabled in profiles for other users on this system. It is only this user's Firefox that crashes on startup, even after a reset.
Have also uninstalled and re-installed Firefox. Again, it crashes on startup only for this user.
Windows event viewer does have several entries for an Application Error:
Faulting application name: plugin-container.exe, version: 32.0.3.5379, time stamp: 0x54224e6b
Faulting module name: mozalloc.dll, version: 32.0.3.5379, time stamp: 0x54221b67
Exception code: 0x80000003
but it's not clear that these entries sync up with the crashes.
This crashing on startup began this morning; no new software or any other system modifications (that I'm aware of) for several weeks now.

The hardware acceleration setting appears to be the culprit. After unchecking the Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available" setting, Firefox no longer crashes on startup.
Initially I'd glossed over this setting since it isn't an issue for any of the other users on this system. I'm still puzzled as to why this would be an issue only for this user, and what had changed as of this morning that set it off, but obviously there's something about their configuration which triggers this situation, even for the default plain vanilla Firefox profile!
Thanks, cor-el!

500 internal server error for only single user

Hi Experts,
Pls help me that
I am getting the problem of 500 Internal server error for a single user .
Except that user remaining users are not getting this error, They are working fine
i.e it is ESS & MSS Package all other application working fine , this iview came from Webdynpro .
Regards
Krishna

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

Burn a CD or DVD for only one user!

Hi,
How can I burn a CD or DVD that only my user can read?
I go to backup my personal informations and want to sure that no other people have access to this CD.
I use the Toast Titanium 7.1.2, but if other software can do this, I can buy it!
Thanks to all!
G4 Quicksilver, Cube and G5 Mac OS X (10.4.8)

Hi,
Thanks to all. But now, I see some thing that make this idea of a disk image, not good. Lets say, that I burn a DVD with a disk image inside the DVD. If I get, just a little risk on de DVD, I lost all the informations. If I dont use a disk image, I lost only the information, in that little risk. And because I go use this as a backup, this problem with security is a problem.
So, if somebody know another way, to burn a DVD, that only my user have access, please, let me know.
Thanks
Paulo
G4 Quicksilver, Cube and G5 Mac OS X (10.4.8)

ICal alerts not working for only one user

My main user account stopped giving me iCal alerts. I can switch to another user and my test alert works. I've found a lot of information online but most seems to be for older versions of iCal. I have gone into ~user/Library and removed everything related to iCal. I even managed to finally delete the home calendar that seemed to re-appear. I managed to start with a clean calendar but no alerts. Is there an alert plist file that could be the culprit? I've done a global search in Terminal for anything under ~User/Library with "alert" or "notification" in the filename but can't find anything. I hate to rebuild an entire account again.

It seems someone has set the user policy at webapplication level for that user.Check the similar thread below
http://social.msdn.microsoft.com/Forums/es-ES/18b4f019-093d-45f6-92b7-8350d13bd663/let-us-know-why-you-need-access-to-this-site-why-do-i-see-this-error-and-who-will-give-access?forum=sharepointgeneral
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

InDesign (and Photoshop) crash on opening for only one user

I just spent the weekend "fresh" installing all of my software and data onto a new computer (MBP OSX 10.7.5). I have CS5.5 Master Suite Install Discs.
InDesign crashes on opening ONLY in my main "standard" account (Let's call it "Rebecca"). I'm prohibited by my university from regularly *working* in admin mode, but my admin ("Rebecca Admin") account opens and saves InDesign files totally fine. I also created a Test "standard" account in which InDesign works fine. I have tried (many times, orders, and ways for each solution):
1. removing the preference files (and caches files)
2. removing the SING files
3. making my main accout the "owner" of the programs and their folders.
4. running the Adobe July mini-fix icon updater (didn't work), tried to do the same "manually" (where I replaced the previous three files that the Adobe updater inserted).
Nothing has worked.
Photoshop also works fine on my admin account and the test "standard" account, but says that I have inadequate permissions on my main Rebecca account (even though Rebecca is the "owner" now). It closes after giving me about three info monologue boxes.
I feel as though I have scrubbed the internet clean, and still have not found a solution. Any ideas?!?!?
I just spent 3 full days getting the new computer up to speed with the old one (that I must turn in), so "moving" to the test account is not a nice thought. I also don't really want to have to log into another account just to use InDesign!
Many thanks,
Rebecca

For anyone having similar problems, here is what solved the problem (that was clearly a permissions issue):
Type into Terminal:
cd /var/folders
sudo rm -rf *

"Missing signed entry in resource" for only some users

Hi,
I have recently updated my .jnlp file and .jar file and added some extra jar resources in the new jnlp.
Since this new version, some users receive an error saying
"Missing signed entry in resource:" for one particular resource.
While for other users it works fine.
I have signed the jar with jarsigner.
Does anyone have an idea what could be the problem here?
Thanks very much in advance,
Best regards,
Stein Aerts,
University of Leuven, Belgium

I remember hearing something like this, and had to do with :
1.) what version of jarsigner was used to sign the jar, and
2.) what version of JRE was used to validate the signed jar file on the client.
(including US only vs. International version of JRE)
For the jar that gets this error:
Does it have any empty directories in it., or does it have entries with non-english characters in the resource names ?
What version of the JDK was used to run jarsigner to sign this jar, and what jre is the application running on ?

Business Purpose field hidden in ESS portal for only one user

Hi All,
We have one wiered error while creating an expense reort in ESS portal and this is only for one employee out of 15,000 users.
Problem:
The additional information for expense type " Business Purpose " field was hidden for one employee and infact this is a required field and the rest of 14,999 users are able to see this filed while creating an expense report.
We wern't able to replicate the same error in other systems like QA/ Dev boxes with the same authorizations and even from the same laptop. This user got the same problem even by logging into different laptop.
SAP ECC 6.0 - Release 603 .
Any suggestions or ideas will appreciate.
Thanks
Anil

Thanks for the reply.
We do not normally assign the Content Admin role in EP to the end user and his back end ECC role and EP portal role is 100% equal to the other users. Audit won't allow to assign any special roles to end users.
Anil.

UDF access problem for only 1 User

Hi @ll,
i got the problem, that one user is not longer able to search bp records by using UDF. Also the user is not able to change the UDF values. This problem only happen on bp data. In every other form the access to udf is possible. Every other using could access UDF in the bp data.
Any idea ?
Regards Steffen
Ps. I grant admin rights for the user. The problem still exists.

Hi Steffen.
I'm not sure this could be helpful for you, but have try to check the ENABLE FLAG for this udf in UDF PARAMETRIZATION?
Open the document whit UDF logging in with the user that have not permission in UDF. Then press CtrlshiftB and check the ENABLE flag for this UDF...
Sorry for my english....
Regards
Gianluca

How to download an app for only one user

I have an iMac running the latest version of lion and I want to download and app from Mac app store but I only want to download it for one user, how can I do that?

If you wish for an app to only be available in one user account, create an Applications folder in the Home folder of that user account and drag and drop the app to that folder.

Reinstalling data from Time Capsule, but for only one user

Hello!
I just got a new-used MacBook Pro and need to use Time Capsule to retrieve my old hard drive's data, but I do not want to overwrite the existing data on the laptop's drive, since it is different, including the OS, I believe. I would like to split the disc, as it were, without partitioning it, for multiple users using Time Capsule. Can I safely use Time Capsule to put all the files only into one user account, or do I need to wipe the drive and partition...?

Anna Scott wrote:
Hello!
I just got a new-used MacBook Pro and need to use Time Capsule to retrieve my old hard drive's data, but I do not want to overwrite the existing data on the laptop's drive, since it is different, including the OS, I believe. I would like to split the disc, as it were, without partitioning it, for multiple users using Time Capsule. Can I safely use Time Capsule to put all the files only into one user account, or do I need to wipe the drive and partition...?
You can use the +Migration Assistant+ app to transfer one or more user accounts from the old Mac, without overwriting anything on the new one. Those will be a separate accounts, with the same logins as on the old Mac. Each user account will have it's own preferences, data, etc. See the pink box in #19 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum), for details.
That won't "merge" two or more user accounts, since each user's data is private. You can do that manually, if you want, by copying data from one user account to another, but it's rather tedious.
You may also need to be careful if there's a big difference in the versions of OSX and/or 3rd-party apps on the two Macs; you may have apps and/or data on one that aren't compatible with the other. In many cases, a newer version of an app will work with the data from an older version, but not vice-versa. You may want to check that out rather carefully first.
If that's a "deal breaker," there may be a (rather clumsy) workaround; partition the internal disk, so you have, say, Leopard on one partition and Snow Leopard on the other. Then boot from whichever you want. In that case, you'd do a full system restore to the new partition, per #14 in the FAQ. That will only work, though, if the Pro will even run the other version -- generally, a Mac won't run a version of OSX that's older than the Mac's hardware.

Problem: Slow Intranet Sites/Internal DNS Resolution for only AD Users

Hello,
We are experiencing a very odd problem.
Any and All Active Directory users are experiencing very slow intranet sites.
We are a school corporation, so this is affecting our Student Information System, as it is entirely web-based and locally hosted.
All of our Domain Controllers are Windows Server 2012 R2, with all the latest critical updates.
All client workstations are Windows 8.1 Professional.
The problem occurs with ALL web browsers (IE, Chrome, FF, etc)
All DNS queries respond in <1 ms (no matter whether we are logged in as AD User or local computer user).
If we login as local computer user, we have blazing fast intranet sites/DNS resolution.
If we login as AD user, everything crawls again... every click on the intranet site spins and says loading for up to 15 seconds.
If we add the the intranet site to the local computer HOST file, it is blazing fast, just as if we logged on as local computer user.
If we take it back out of the HOST file, it drags again.
I am totally stumped!
Any help is appreciated.
Thanks!

Hi,
How are DNS settings configured?
If there are any public DNS IP addresses in Preferred or Alternate field, please remove them, then input these DNS entries in the Advanced section. We should only configure Domain Controllers’ IP addresses on Preferred
and Alternate DNS server section for domain-joined machines.
More information for you:
Active Directory’s Reliance on DNS, and using an ISP’s DNS address
http://blogs.msmvps.com/acefekay/2009/08/17/ad-and-its-reliance-on-dns/
Best Regards,
Amy

Filter base on CallerID to VM for only 1 User

Similar Messages

Maybe you are looking for