Filter By Country Code

I apologize in advance if this is an easy question, but our IronPort configuration has been working fine and we haven't had to change much (if any) since I took over. We have a C360 and what I'm looking to do is explicitely block mail coming from a specific TLD (ccTLD). We've seen a massive influx in spam from a particular country and it is generating DNS lookups that I'd like to stop. Basically I want to drop all mail coming in from that ccTLD and stop it ever makes it to the point that we start doing reputation/dns lookups. Any advice on how this can best be accomplished?
Thanks!
Trevor

Trevor,
This is a good question. Have you considered blocking the IPs at your firewall?
Firewall - Country IP blocking:
http://community.spiceworks.com/topic/149633-best-free-fiewall-with-country-ip-blocking
Hope this helps.
Stephan

Similar Messages

Filter Dependent BADI - All Country codes to be included

Hi,
I am using a BADI 'CMS_RE_LR_DIALOG' which has a filter type 'CMS_RE_DTE_LR_ID'.
This BADI is used in conjunction with a screen field that can take as inputs the 'country codes'. However currently this BADI has only one implementation for the country code 'DE' (Germany) and this is a SAP implementation and should not be modified. The requirement is that I need to include all the country codes in this BADI so that the associated transaction is executed for all country codes.
Could anyone brief me how this could be done? One procedure would be to create an impl each for every country code, however this is not a feasible solution. Is there any other way in which we can pass all values in a structure to the filter type? I tried using the data element LAND1 for this purpose, but not getting the required output with it.
Kindly pitch in your inputs as to how this could be implemented.

filter is implemented in se18 in badi definition.
certain times u may require to implement certain checks based on country so u can specify the country element as key and implementa filter dependant badi.
кu03B1ятu03B9к
Edited by: kartik tarla on Feb 15, 2009 12:46 PM

How to search Business Partner filter by country

As topic above, how to search Business Partner filter by country, which table is involve?
Appreciate your kind effort
Thx

Hi
1) you can use the function module 'BAPI_BUPA_SEARCH' to filter BP by country. In the address data field, you can enter country code (say IN for India) and this will return you the list of BP's belonging to the country.
2) You can use view BBPV_BUPA_ADDR to see the BP's for a particular country.
for this view, if you look at the "Table/Join Conditions" tab, you can see the underlying tables used for join ->
BUT000 ->BuPA Master
BUT020 ->BP Address table
ADRC ->Address services.
Hope the above info helps.
Regards
Nisha

Lightroom 4 GPS/ Country Code questions

1. If you import an image with GPS data, Lightroom 4 will add appropriate values for Sublocation, City, State/Province, Country and Country Code. Is there a way to add this data to existing files while retaining history?
You can write metadata to files ([Ctrl][S]), remove those files from Lightroom and then synch folder to reimport them. That reimports them with all modifed settings but without their history. Is there another way that retains the history?
2. Is a google map link available for a GPS location of a photograph?
In Lightroom 3, you could click on the GPS location and that took you to a Google map page with a specific web link that you could then publish, eg on a blog. You can copy and paste the GPS location into a Google map page but that does not give you a web link you can use.
3. Is there a way of publishing a map?
Is there (or will there be) any way of exporting a map page, say as a jpeg?
Is it OK to take a screen dump of a map page and publish it, eg in a blog?

Ian Lyons wrote:
1. There is no way of saving history to the file.
I've worked it out. There is a way of updating location descriptions for existing images in Lightroom 4 from the GPS setting.
If you select some images with the same GPS location and [Synch Metadata] for GPS, this fills in the location descriptions, even if none of the images have them to start with.
There are then two ways of doing this for a Folder of images:
(1) Modifying in Library
Select a bunch of images taken in the same place and therefore with the same GPS setting. You can check that the GPS settings are the same because under Metadata in the right-hand tab it will show a single GPS location rather than "<mixed>".
[Synch Metadata] for GPS.
Repeat for different locations.
If you have a single image in a location, you'd need to create a virtual copy, [Synch Metadata] for GPS, then delete the virtual copy.
(2) Modifying through re-import
This method is more complex but may be quicker where there are many GPS locations.
It is probably a good idea to first ensure you have a current backup, or backup to a catalogue, in case anything goes wrong.
Select images with no changes to Develop settings: click the Metadata filter (Library/ Grid mode) and then filter for Develop Preset = "Default Settings".
Write metadata for these images to files
[Ctrl][S]
(unless you already do this with every image change)
Remove the selected images from the Lightroom catalogue: click [Delete] and then select [Remove] (do not [Delete from Disk]).
Reimport the images: right-click the folder for the images and select [Synchronise Folder ...].
All the images with no Development changes will now have location descriptions.
Now you can update the images with Development changes without affecting the History.
Filter for Develop Settings = "Custom",
select an image (or several at the same location),
filter for Develop Settings = "All" and
synch GPS settings from an adjacent image with location descriptions.

How to find out the user Country code in flex

Hi all,
I want to find out the country code, to load dynamic localization swfs.
example : my swf file name
en_US_res.swf
by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
Thanks!!

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Satellite L750D - Cannot register warranty due to country code

Unsure if this is an appropriate question BUT...
I am trying to register my L750D Notebook for warranty and it will not accept my country code.
I live in Australia so the country code is 61. I live in South Australia - code 8 and my phone number is 83xxxxxx.
So I have tried to put the code in as 61 then 8 then 83xxxxxx but it will not accept it.
Would anyone know what I am doing wrong?
I have also tried about 30 other ways of doing it?
Kind regards
Felicity,

Hi mate
Did you try to register the warranty on the right Toshiba page?
Please check this Toshiba Australia warranty registration webpage:
http://www.mytoshiba.com.au/support/warranty/statements
Please post feedback!

CUCM 8.6.2 Generating CSRs With Incorrect Country Code

Hi folks, I'm running CUCM 8.6.2.25900-8 on a single cluster (1x pub, 4x sub). My CA certs for the tomcat service are due to expire shortly so I've generated CSRs for all the servers and submitted them to our provider. All but one of the requests went through with no issues but one failed because the CSR specified a country code of 'US'. We are in the UK and the four other servers all generated CSRs specifying C=GB.
Examining the current tomcat cert or issuing "show web-security" on the command-line of the server who's CSR failed also show 'C=GB'
Looking at the 'set web-security' command it appears that I cannot change the country code.
Why is the server generating CSRs with 'C=US'?
How do I change this behaviour such that they are generated with 'C=GB' instead?

Surprisingly, it has made it all the way to 10.5(x) with the same info and the same error...
I did found a method to change it via root access, and you might not require root access, but I can't tell for sure as I would need to look at exactly what the contents of the file that TAC changes, but apparently it's just the platformConfig.xml that they need to change and reboot.
If that's the case, using the utils import config using pretty much all the same info, except the country, would end up with the same outcome.
Again, not 100% sure but theory says that should do the trick, you can run that thru TAC if you open the case and see what they think about it.

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

How do I add the country code to all contacts when it did not previously appear?

I just moved from the US to the UK and purchased a new iPhone 4S. When my contacts migrated from Outlook to the iPhone they did not include the country code in the US and therefore all contacts numbers are now listed incorrectly. How can I add the country code to hundreds of contacts painlessly?
Thanks in advance.

International Assist is activated. Upon further review this appears to be a case of the original country codes not being added when the contact list was constructed. iOS has not figured this out and thus when changing countries I've been forced to add the country codes to every contact record manually. Disappointing and very labour intensive. If only Apple allowed for a macro that simplified the mass change.

How can I call contacts from my list without the country code that is registered with that contact?

I have all my contacts registered with a country code. When I want to make calls from my iphone, I do not want the phone to dial the country code, but only the area code. How can I make that happen?

Your 3G backup contains your contacts already, you don't need to sync them to Outlook or anything just restore the backup file from the 3G onto the 4S and you should be good to go.
This kb article should help:
http://support.apple.com/kb/ht1414

Not able to create a customer master record with US as the country code

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinila

Hi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM

I recently moved from the US to Sweden and all my contacts are saved with their international country code prefixes. I keep getting text message errors when I send a text, but the contact info is stored correctly for each. How can I fix this?

I receive an error message that adds the country code again. I tried it with no country code and the area code included but I still receive an error message. It only does it sometimes and not to all Sweden contacts. There is no obvious reason why it does it to some but not others. Does any know what the problem is and how to fix it? Thank you!

Only other thing I can suggest is to reset your phone. This won't touch any data or settings:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

AT THE TIME OF CRETION OF BP IN CRM HOW GET COUNTRY CODE ATUMATICALY DISPL

hello friend my requirement is at the time creation of bp in crm with instead of manually selection in country code system want pick automatically and display as a display field (not editable to change)
HOW IT IS POSSIBLE and what are things need to do this.
if any one knows please reply
bindhu

Hi Bindhu,
1. You are able to see country field populated by default since for your user the parameter LND has been set to a default value.
To check the same go to transaction SU01, put your username and enter. Select tab Parameters, in column Parameter Id there must be an entry for LND and default value must be assigned to it.
You can also see the same in System-> User Profile --> Own data.
2. The field is in display mode because of field groupings.
In transaction SPRO
SAP Implementation Guide -> Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings
For one of the option here Address: Country must be set to display. e.g Configure Field Attributes per Activity
Here choose Create, for dataset Addresses, field group Address: Country must be set to display. If not check in others.
If the above 2 are not found, even Badis can be responsible for the same.
Wish this helps.
Regards,
Shalini Chauhan

Creation of new country codes - Serbia.

The business user is not able to find country code for Serbia in production system.
We are currently using SAP ECC 6.0.
I have refered the SAP note no 603152 for creating country code .
Their are two alternatives available to fix it:
1. Manual creation of country code in the system. We need to maintain additionally the currency also in the system. Note: I do not know the implication of manual creation of country code in SAP sytem. As Country codes are used by many tables.
2. If we need new country codes for country settings of Serbia.
Then it can be done by using new SAP Basis (Netweaver) releases from release SAP_BASIS 710 or appropriate support pack. Then country precustomised setting of serbia can be done by upgrading support pack of basis.
The above alternatives are available. As country code is an important aspect & maintained at client level.
Please let us know which alternative would be suitable, Why.

I would recommend the basis way.
If you go the manual way - Go to T Code OY01.
Thanks,
Nandita

Filter By Country Code

Similar Messages

Maybe you are looking for