Filter causes browser to wait for more data

Using the J2EE RI, I notice that under certain circumstances my filter causes IE 5.5 and Netscape 4.7 to spin, waiting for data which doesn't exist, after my page has been fully recieved. My filter simply replaces the HTTP output stream with it's own, chains the request, and then reads the length of the response before passing it through unmodified.
The odd thing is that one must call response.getWriter() before chaining, otherwise the waiting behavior occurs. Can anyone explain this, or suggest a tool to snoop on the response headers, or point me toward documentation of this behavior?
Thanks,
James

Hi, I've got the same problem!
If you have solved the problem, would you tell me how, please?

Similar Messages

  • CUPS: Printer always waits for more data, and finally times out.

    I apologise if this should be categorised as" system administration" rather than "installation". The reason why I chose this category was that the error happened right after installing and setting up cups, so it should not have to do with fine-tuning or be the result of a particularly specific situation.
    I have had a novel kind of problem with printing since I first installed Arch Linux:
    Whenever I print - regardless of application -, my OKI 431 printer will always wait for more data after having completed the print job (as shown in its small display, where it keeps saying 'DATA' even after the last printed page has come out). After 25 to 30 seconds of such waiting, it will print out two pages, the first one empty, the second one saying:
    ERROR:
    timeout
    OFFENDING COMMAND:
    timeout
    STACK:
    The printer display then goes back to saying 'ONLINE'. If I print several documents WITHIN this 25 to 30 sec delay, i.e. in fast succession, I only get the two pages once, i.e. after the last of these jobs has been printed.
    What seems to be related to that is the status message on the "Printers" page of CUPS' Web interface: It says
    Idle - "Sending data to printer."
    all the time, even though I am not printing anything. (And this was the same before the update.)
    Printing is otherwise completely fine - the one practical problem is I have an ever-growing pile of empty pages mixed with pages containing the above error message next to my printer, i.e. two extra pages after each printout. (The one workaround I have found so far is quickly switching off the printer after within the 25 - 30 secs time window.) I have tried to google this problem with various search term combinations, but have not been able to find pages specific to this problem anywhere.
    What I have tried out was wiping the /etc/cups directory, updating cups, adding the printer again using lpadmin, and setting it as the default printer with lpoptions (both as explained in the Arch Wiki page). This has not changed anything relevant about the behaviour.
    (The one effect this has had is that pointing some browsers (Opera, Dillo) to localhost:631 now gets a "Bad request" response from CUPS, but on most browsers (Mozilla, Qupzilla, Midori, Google Chrome, Lynx) it gets the normal Web interface. But this is probably not related to the problem.)
    I will try to give some basic context:
    > uname -a
    Linux bertrandrussell 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Linux
    > pacman -Qi cups
    Version : 1.7.1-3
    > cat /etc/cups/printers.conf
    # Printer configuration file for CUPS v1.7.1
    # Written by cupsd on 2014-02-16 12:24
    # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
    <Printer OKI>
    UUID urn:uuid:6414e199-9c1c-3330-4b66-5311b2bff8e8
    Info OKI
    MakeModel OKI DATA CORP B431(PS)
    DeviceURI usb://OKI%20DATA%20CORP/B431?serial=AK17008654
    State Idle
    StateTime 1392549811
    Type 8425556
    Accepting Yes
    Shared Yes
    JobSheets none none
    QuotaPeriod 0
    PageLimit 0
    KLimit 0
    OpPolicy default
    ErrorPolicy abort-job
    </Printer>
    Can anybody help me on where to start looking?
    Thank you very much for any help!
    Florian

    It seems I have lost my first error_log, but I have produced a fresh one. It contains precisely what was logged since the reboot (albeit not the marker of when exactly I printed the document):
    I'll try the wrapper - here goes:
    I [22/Feb/2014:18:13:07 +0100] Listening to [v1.::1]:631 (IPv6)
    I [22/Feb/2014:18:13:07 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [22/Feb/2014:18:13:07 +0100] Listening to /run/cups/cups.sock (Domain)
    I [22/Feb/2014:18:13:07 +0100] Remote access is disabled.
    D [22/Feb/2014:18:13:07 +0100] Added auto ServerAlias bertrandrussell
    I [22/Feb/2014:18:13:07 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [22/Feb/2014:18:13:07 +0100] Repairing ownership of "/run/cups"
    D [22/Feb/2014:18:13:07 +0100] Creating missing directory "/run/cups/certs"
    D [22/Feb/2014:18:13:07 +0100] Repairing ownership of "/run/cups/certs"
    D [22/Feb/2014:18:13:07 +0100] Repairing access permissions of "/run/cups/certs"
    I [22/Feb/2014:18:13:07 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [22/Feb/2014:18:13:07 +0100] Configured for up to 100 clients.
    I [22/Feb/2014:18:13:07 +0100] Allowing up to 100 client connections per host.
    I [22/Feb/2014:18:13:07 +0100] Using policy "default" as the default.
    I [22/Feb/2014:18:13:07 +0100] Full reload is required.
    I [22/Feb/2014:18:13:07 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 39 types, 52 filters...
    D [22/Feb/2014:18:13:07 +0100] Loading printer OKI...
    D [22/Feb/2014:18:13:07 +0100] load_ppd: Loading /var/cache/cups/OKI.data...
    D [22/Feb/2014:18:13:07 +0100] cupsdRegisterPrinter(p=0x7fa99aa6d130(OKI))
    I [22/Feb/2014:18:13:07 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    D [22/Feb/2014:18:13:07 +0100] [Job 1] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 2] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 3] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 4] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 5] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 6] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 7] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 8] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 9] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 10] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 11] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 12] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 13] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 14] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 15] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 16] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 17] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 18] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 19] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 20] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 21] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 22] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 23] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 24] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 25] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 26] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 27] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 28] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 29] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 30] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 31] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 32] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 33] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 34] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 35] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 36] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 37] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 38] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 39] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 40] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 41] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 42] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 43] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 44] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 45] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 46] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 47] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 48] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 49] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 50] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 51] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 52] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 53] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 54] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 55] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 56] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 57] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 58] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 59] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 60] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 61] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 62] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 63] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 64] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 65] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 66] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 67] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 68] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 69] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 70] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 71] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 72] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 73] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 74] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 75] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 76] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 77] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 78] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 79] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 80] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 81] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 82] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 83] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 84] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 85] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 86] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 87] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 88] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 89] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 90] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 91] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 92] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 93] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 94] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 95] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 96] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 97] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 98] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 99] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 100] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 101] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 102] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 103] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 104] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 105] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 106] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 107] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 108] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 109] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 110] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 111] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 112] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 113] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 114] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 115] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 116] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 117] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 118] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 119] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 120] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 121] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 122] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 123] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 124] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 125] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 126] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 127] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 128] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 129] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 130] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 131] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 132] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 133] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 134] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 135] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 136] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 137] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 138] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 139] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 140] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 141] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 142] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 143] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 144] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 145] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 146] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 147] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 148] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 149] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 150] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 151] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 152] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 153] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 154] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 155] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 156] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 157] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 158] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 159] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 160] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 161] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 162] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 163] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 164] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 165] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 166] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 167] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 168] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 169] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 170] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 171] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 172] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 173] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 174] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 175] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 176] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 177] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 178] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 179] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 180] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 181] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 182] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 183] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 184] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 185] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 186] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 187] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 188] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 189] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 190] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 191] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 192] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 193] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 194] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 195] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 196] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 197] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 198] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 199] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 200] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 201] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 202] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 203] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 204] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 205] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 206] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 207] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 208] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 209] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 210] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 211] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 212] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 213] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 214] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 215] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 216] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 217] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 218] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 219] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 220] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 221] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 222] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 223] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 224] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 225] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 226] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 227] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 228] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 229] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 230] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 231] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 232] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 233] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 234] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 235] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 236] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 237] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 238] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 239] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 240] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 241] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 242] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 243] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 244] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 245] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 246] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 247] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 248] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 249] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 250] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 251] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 252] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 253] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 254] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 255] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 256] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 257] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 258] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 259] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 260] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 261] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 262] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 263] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 264] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 265] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 266] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 267] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 268] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 269] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 270] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 271] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 272] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 273] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 274] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 275] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 276] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 277] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 278] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 279] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 280] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 281] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 282] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 283] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 284] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 285] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 286] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 287] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 288] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 289] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 290] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 291] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 292] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 293] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 294] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 295] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 296] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 297] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 298] Loading from cache...
    D [22/Feb/2014:18:13:07 +0100] [Job 299] Loading from cache...
    I [22/Feb/2014:18:13:07 +0100] Full reload complete.
    D [22/Feb/2014:18:13:07 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [22/Feb/2014:18:13:07 +0100] Cleaning out old files in "/var/spool/cups/tmp".
    D [22/Feb/2014:18:13:07 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [22/Feb/2014:18:13:07 +0100] Cleaning out old files in "/var/cache/cups".
    D [22/Feb/2014:18:13:07 +0100] systemd_checkin: Matched existing listener /run/cups/cups.sock with fd 3...
    D [22/Feb/2014:18:13:07 +0100] systemd_checkin: Adding new listener [v1.::] with fd 4...
    D [22/Feb/2014:18:13:07 +0100] Calling FindDeviceById(cups-OKI)
    D [22/Feb/2014:18:13:08 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id 'cups-OKI' does not exist
    D [22/Feb/2014:18:13:08 +0100] Using profile ID "OKI-Gray..".
    D [22/Feb/2014:18:13:08 +0100] Calling CreateProfile(OKI-Gray..,temp)
    D [22/Feb/2014:18:13:09 +0100] Created profile "/org/freedesktop/ColorManager/profiles/OKI_Gray__".
    I [22/Feb/2014:18:13:09 +0100] Registering ICC color profiles for "OKI".
    D [22/Feb/2014:18:13:09 +0100] Calling CreateDevice(cups-OKI,temp)
    D [22/Feb/2014:18:13:09 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_OKI".
    D [22/Feb/2014:18:13:09 +0100] Calling /org/freedesktop/ColorManager/devices/cups_OKI:AddProfile(/org/freedesktop/ColorManager/profiles/OKI_Gray__) [soft]
    E [22/Feb/2014:18:13:09 +0100] Unable to bind socket for address [v1.::1]:631 - Address already in use.
    E [22/Feb/2014:18:13:09 +0100] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
    I [22/Feb/2014:18:13:09 +0100] Listening to /run/cups/cups.sock:631 on fd 3...
    I [22/Feb/2014:18:13:09 +0100] Listening to [v1.::]:631 on fd 4...
    I [22/Feb/2014:18:13:09 +0100] Resuming new connection processing...
    D [22/Feb/2014:18:13:09 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:13:09 +0100] Discarding unused server-started event...
    D [22/Feb/2014:18:13:10 +0100] Report: clients=0
    D [22/Feb/2014:18:13:10 +0100] Report: jobs=299
    D [22/Feb/2014:18:13:10 +0100] Report: jobs-active=0
    D [22/Feb/2014:18:13:10 +0100] Report: printers=1
    D [22/Feb/2014:18:13:10 +0100] Report: stringpool-string-count=1578
    D [22/Feb/2014:18:13:10 +0100] Report: stringpool-alloc-bytes=8880
    D [22/Feb/2014:18:13:10 +0100] Report: stringpool-total-bytes=27352
    D [22/Feb/2014:18:13:56 +0100] [Client 13] Accepted from localhost:631 (IPv6)
    D [22/Feb/2014:18:13:56 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:13:59 +0100] [Client 13] GET / HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] GET /cups.css HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] GET /images/left.gif HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 14] Accepted from localhost:631 (IPv6)
    D [22/Feb/2014:18:13:59 +0100] [Client 14] Waiting for request.
    D [22/Feb/2014:18:13:59 +0100] [Client 15] Accepted from localhost:631 (IPv6)
    D [22/Feb/2014:18:13:59 +0100] [Client 15] Waiting for request.
    D [22/Feb/2014:18:13:59 +0100] [Client 14] GET /images/right.gif HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 14] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 16] Accepted from localhost:631 (IPv6)
    D [22/Feb/2014:18:13:59 +0100] [Client 16] Waiting for request.
    D [22/Feb/2014:18:13:59 +0100] [Client 15] GET /images/cups-icon.png HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 15] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 16] GET /images/sel.gif HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 16] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] GET /images/unsel.gif HTTP/1.1
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:13:59 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:13:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [Client 14] GET /printers/ HTTP/1.1
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:02 +0100] [Client 14] No authentication data provided.
    D [22/Feb/2014:18:14:02 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@bertrandrussell"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.7.1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[13] = "USER=root"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[17] = "IPP_PORT=631"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[27] = "SERVER_PROTOCOL=HTTP/1.1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[29] = "HTTP_REFERER=http://localhost:631/"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[30] = "REQUEST_METHOD=GET"
    D [22/Feb/2014:18:14:02 +0100] [CGI] envp[31] = "QUERY_STRING="
    D [22/Feb/2014:18:14:02 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 668)
    I [22/Feb/2014:18:14:02 +0100] [Client 14] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=668)
    D [22/Feb/2014:18:14:02 +0100] [Client 14] file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [CGI] org.cups.sid cookie not found, initializing!
    D [22/Feb/2014:18:14:02 +0100] [CGI] org.cups.sid cookie is "4d43abea28d1837cbb1175a07cd5bb45"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: SECTION="printers"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=""
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Accepted from localhost (Domain)
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Waiting for request.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] POST / HTTP/1.1
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [Client 18] No authentication data provided.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] 2.0 CUPS-Get-Default 1
    D [22/Feb/2014:18:14:02 +0100] CUPS-Get-Default
    D [22/Feb/2014:18:14:02 +0100] CUPS-Get-Default client-error-not-found: No default printer.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Content-Length: 113
    D [22/Feb/2014:18:14:02 +0100] [Client 18] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x7fa99aaad580(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:02 +0100] [Client 18] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Waiting for request.
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [CGI] show_all_printers(http=0x7f1162e63260, user="(null)")
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: TITLE="Printers"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: SERVER_NAME="localhost"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: CUPS_VERSION="CUPS v1.7.1"
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] Script header: Set-Cookie: org.cups.sid=4d43abea28d1837cbb1175a07cd5bb45; path=/;
    D [22/Feb/2014:18:14:02 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [22/Feb/2014:18:14:02 +0100] Script header:
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] POST / HTTP/1.1
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [Client 18] No authentication data provided.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] 2.0 CUPS-Get-Printers 2
    D [22/Feb/2014:18:14:02 +0100] CUPS-Get-Printers
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Content-Length: 292
    D [22/Feb/2014:18:14:02 +0100] [Client 18] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=292, response=0x7fa99aadf780(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:02 +0100] [Client 18] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Waiting for request.
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: TOTAL="1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: SERVER_NAME="localhost"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: CUPS_VERSION="CUPS v1.7.1"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_state[0]="3"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_state_message[0]=""
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: admin_uri[0]="/admin/"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_uri_supported[0]="/printers/OKI"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_name[0]="OKI"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_location[0]=""
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_info[0]="OKI"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetArray: printer_make_and_model[0]="OKI DATA CORP B431(PS)"
    D [22/Feb/2014:18:14:02 +0100] [CGI] cgiSetVariable: THISURL="/printers/"
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] [Client 18] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:02 +0100] [Client 18] Closing connection.
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] CGI data ready to be sent.
    D [22/Feb/2014:18:14:02 +0100] PID 668 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=668, file=17
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for CGI data.
    D [22/Feb/2014:18:14:02 +0100] [Client 14] Waiting for request.
    D [22/Feb/2014:18:14:02 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Accepted from localhost (Domain)
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Waiting for request.
    D [22/Feb/2014:18:14:21 +0100] Report: clients=5
    D [22/Feb/2014:18:14:21 +0100] Report: jobs=299
    D [22/Feb/2014:18:14:21 +0100] Report: jobs-active=0
    D [22/Feb/2014:18:14:21 +0100] Report: printers=1
    D [22/Feb/2014:18:14:21 +0100] Report: stringpool-string-count=1582
    D [22/Feb/2014:18:14:21 +0100] Report: stringpool-alloc-bytes=8904
    D [22/Feb/2014:18:14:21 +0100] Report: stringpool-total-bytes=27416
    D [22/Feb/2014:18:14:21 +0100] [Client 17] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Closing connection.
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Accepted from localhost (Domain)
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Waiting for request.
    D [22/Feb/2014:18:14:21 +0100] [Client 17] POST / HTTP/1.1
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] No authentication data provided.
    D [22/Feb/2014:18:14:21 +0100] [Client 17] 2.0 CUPS-Get-Printers 1
    D [22/Feb/2014:18:14:21 +0100] CUPS-Get-Printers
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Content-Length: 1073
    D [22/Feb/2014:18:14:21 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1073, response=0x7fa99aaad7c0(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:21 +0100] [Client 17] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Waiting for request.
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] POST / HTTP/1.1
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] No authentication data provided.
    D [22/Feb/2014:18:14:21 +0100] [Client 17] 2.0 CUPS-Get-Default 2
    D [22/Feb/2014:18:14:21 +0100] CUPS-Get-Default
    D [22/Feb/2014:18:14:21 +0100] CUPS-Get-Default client-error-not-found: No default printer.
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Content-Length: 113
    D [22/Feb/2014:18:14:21 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x7fa99aae73c0(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:21 +0100] [Client 17] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Waiting for request.
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:21 +0100] [Client 17] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:21 +0100] [Client 17] Closing connection.
    D [22/Feb/2014:18:14:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:30 +0100] [Client 16] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:30 +0100] [Client 16] Closing connection.
    D [22/Feb/2014:18:14:30 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:30 +0100] [Client 15] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:30 +0100] [Client 15] Closing connection.
    D [22/Feb/2014:18:14:30 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:30 +0100] [Client 13] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:30 +0100] [Client 13] Closing connection.
    D [22/Feb/2014:18:14:30 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Accepted from localhost (Domain)
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:32 +0100] [Client 13] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Closing connection.
    D [22/Feb/2014:18:14:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Accepted from localhost (Domain)
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:32 +0100] [Client 13] POST / HTTP/1.1
    D [22/Feb/2014:18:14:32 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:32 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:14:32 +0100] [Client 13] 2.0 CUPS-Get-Printers 3
    D [22/Feb/2014:18:14:32 +0100] CUPS-Get-Printers
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Content-Length: 1073
    D [22/Feb/2014:18:14:32 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1073, response=0x7fa99aaad750(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:32 +0100] [Client 13] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:32 +0100] [Client 13] POST / HTTP/1.1
    D [22/Feb/2014:18:14:32 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:32 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:14:32 +0100] [Client 13] 2.0 CUPS-Get-Default 4
    D [22/Feb/2014:18:14:32 +0100] CUPS-Get-Default
    D [22/Feb/2014:18:14:32 +0100] CUPS-Get-Default client-error-not-found: No default printer.
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Content-Length: 113
    D [22/Feb/2014:18:14:32 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x7fa99aaad7a0(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:32 +0100] [Client 13] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:32 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [22/Feb/2014:18:14:33 +0100] [Client 14] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:14:33 +0100] [Client 14] Closing connection.
    D [22/Feb/2014:18:14:33 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:14:44 +0100] [Client 13] POST /printers/OKI HTTP/1.1
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:14:44 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:14:44 +0100] [Client 13] 2.0 Create-Job 5
    D [22/Feb/2014:18:14:44 +0100] Create-Job ipp://localhost:631/printers/OKI
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
    D [22/Feb/2014:18:14:44 +0100] add_job: requesting-user-name="lehrer"
    D [22/Feb/2014:18:14:44 +0100] Adding default job-sheets values "none,none"...
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Adding start banner page "none".
    D [22/Feb/2014:18:14:44 +0100] Discarding unused job-created event...
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Queued on "OKI" by "lehrer".
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/OKI) from localhost
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Content-Length: 183
    D [22/Feb/2014:18:14:44 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=183, response=0x7fa99aaad890(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:44 +0100] [Client 13] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [22/Feb/2014:18:14:44 +0100] [Client 13] POST /printers/OKI HTTP/1.1
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [22/Feb/2014:18:14:44 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:14:44 +0100] [Client 13] 2.0 Send-Document 6
    D [22/Feb/2014:18:14:44 +0100] Send-Document ipp://localhost:631/printers/OKI
    D [22/Feb/2014:18:14:44 +0100] cupsdIsAuthorized: requesting-user-name="lehrer"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Auto-typing file...
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Request file type is application/pdf.
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    I [22/Feb/2014:18:14:44 +0100] [Job 300] File of type application/pdf queued by "lehrer".
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Adding end banner page "none".
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] time-at-processing=1393089284
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [22/Feb/2014:18:14:44 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:14:44 +0100] [Job 300] 3 filters for job:
    D [22/Feb/2014:18:14:44 +0100] [Job 300] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
    D [22/Feb/2014:18:14:44 +0100] [Job 300] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
    D [22/Feb/2014:18:14:44 +0100] [Job 300] - (application/vnd.cups-postscript to printer/OKI, cost 0)
    D [22/Feb/2014:18:14:44 +0100] [Job 300] job-sheets=none,none
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[0]="OKI"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[1]="300"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[2]="lehrer"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[3]="32_noun_clauses"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[4]="1"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[5]="Duplex=None InputSlot=Upper PageSize=A4 job-uuid=urn:uuid:f6fd7095-afa2-3a84-4db2-7a65f497728a job-originating-host-name=localhost time-at-creation=1393089284 time-at-processing=1393089284"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] argv[6]="/var/spool/cups/d00300-001"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[7]="CUPS_STATEDIR=/run/cups"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[8]="HOME=/var/spool/cups/tmp"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[10]="SERVER_ADMIN=root@bertrandrussell"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[11]="SOFTWARE=CUPS/1.7.1"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[13]="USER=root"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[14]="CUPS_MAX_MESSAGE=2047"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[17]="IPP_PORT=631"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[18]="CHARSET=utf-8"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[19]="LANG=de_DE.UTF-8"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[20]="PPD=/etc/cups/ppd/OKI.ppd"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[21]="RIP_MAX_CACHE=128m"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[22]="CONTENT_TYPE=application/pdf"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[23]="DEVICE_URI=usb://OKI%20DATA%20CORP/B431?serial=AK17008654"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[24]="PRINTER_INFO=OKI"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[25]="PRINTER_LOCATION="
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[26]="PRINTER=OKI"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[27]="PRINTER_STATE_REASONS=none"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[28]="CUPS_FILETYPE=document"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[29]="FINAL_CONTENT_TYPE=printer/OKI"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] envp[30]="AUTH_I****"
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Started filter /usr/lib/cups/filter/pdftopdf (PID 703)
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Started filter /usr/lib/cups/filter/pdftops (PID 704)
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Started backend /usr/lib/cups/backend/usb (PID 705)
    D [22/Feb/2014:18:14:44 +0100] Discarding unused job-state-changed event...
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/OKI) from localhost
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Content-Length: 175
    D [22/Feb/2014:18:14:44 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=175, response=0x7fa99aae6ec0(IPP_IDLE), pipe_pid=0, file=-1
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [22/Feb/2014:18:14:44 +0100] [Client 13] bytes=0, http_state=0, data_remaining=0
    D [22/Feb/2014:18:14:44 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] pdftops - copying to temp print file "/var/spool/cups/tmp/002c0530d3451"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Loading USB quirks from "/usr/share/cups/usb".
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Loaded 67 quirks.
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Printing on printer with URI: usb://OKI%20DATA%20CORP/B431?serial=AK17008654
    D [22/Feb/2014:18:14:44 +0100] [Job 300] libusb_get_device_list=12
    I [22/Feb/2014:18:14:44 +0100] [Job 300] Waiting for printer to become available.
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:14:44 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:14:44 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Set job-printer-state-message to "Waiting for printer to become available.", current level=INFO
    D [22/Feb/2014:18:14:44 +0100] Discarding unused job-progress event...
    D [22/Feb/2014:18:14:44 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:14:44 +0100] [Job 300] PID 703 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Printer make and model: Oki B431
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Running command line for pstops: pstops 300 lehrer 32_noun_clauses 1 'Duplex=None InputSlot=Upper PageSize=A4 job-uuid=urn:uuid:f6fd7095-afa2-3a84-4db2-7a65f497728a job-originating-host-name=localhost time-at-creation=1393089284 time-at-processing=1393089284'
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Using image rendering resolution 600 dpi
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/002c0530d3451
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Started filter gs (PID 707)
    D [22/Feb/2014:18:14:44 +0100] [Job 300] Started filter pstops (PID 708)
    D [22/Feb/2014:18:14:45 +0100] [Job 300] Page = 595x842; 13,13 to 582,829
    D [22/Feb/2014:18:14:45 +0100] [Job 300] slow_collate=0, slow_duplex=0, slow_order=0
    D [22/Feb/2014:18:14:45 +0100] [Job 300] Before copy_comments - %!PS-Adobe-3.0
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %!PS-Adobe-3.0
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%BoundingBox: 0 0 595 842
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%HiResBoundingBox: 0 0 595.00 842.00
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%Creator: GPL Ghostscript 910 (ps2write)
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%LanguageLevel: 2
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%CreationDate: D:20140222181445+01'00'
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%Pages: 1
    D [22/Feb/2014:18:14:45 +0100] [Job 300] %%EndComments
    D [22/Feb/2014:18:14:45 +0100] [Job 300] Before copy_prolog - %%BeginProlog
    D [22/Feb/2014:18:14:49 +0100] [Job 300] libusb_get_device_list=12
    I [22/Feb/2014:18:14:49 +0100] [Job 300] Waiting for printer to become available.
    D [22/Feb/2014:18:14:54 +0100] [Job 300] libusb_get_device_list=12
    I [22/Feb/2014:18:14:54 +0100] [Job 300] Waiting for printer to become available.
    D [22/Feb/2014:18:14:59 +0100] [Job 300] libusb_get_device_list=12
    I [22/Feb/2014:18:14:59 +0100] [Job 300] Waiting for printer to become available.
    D [22/Feb/2014:18:15:04 +0100] [Job 300] libusb_get_device_list=12
    I [22/Feb/2014:18:15:04 +0100] [Job 300] Waiting for printer to become available.
    D [22/Feb/2014:18:15:09 +0100] [Job 300] libusb_get_device_list=13
    D [22/Feb/2014:18:15:09 +0100] [Job 300] STATE: +connecting-to-device
    D [22/Feb/2014:18:15:09 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:15:09 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:09 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] STATE: -connecting-to-device
    D [22/Feb/2014:18:15:09 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:15:09 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    D [22/Feb/2014:18:15:09 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Device protocol: 2
    I [22/Feb/2014:18:15:09 +0100] [Job 300] Sending data to printer.
    D [22/Feb/2014:18:15:09 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:15:09 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Set job-printer-state-message to "Sending data to printer.", current level=INFO
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:09 +0100] Discarding unused job-progress event...
    D [22/Feb/2014:18:15:09 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PID 707 (gs) exited with no errors.
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Before copy_setup - %%Page: 1 1
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Before page loop - %%Page: 1 1
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Copying page 1...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PAGE: 1 1
    D [22/Feb/2014:18:15:10 +0100] Discarding unused job-progress event...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] pagew = 569.0, pagel = 816.0
    D [22/Feb/2014:18:15:10 +0100] [Job 300] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PageLeft = 13.0, PageRight = 582.0
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PageTop = 829.0, PageBottom = 13.0
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PageWidth = 595.0, PageLength = 842.0
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 1 pages...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PID 708 (pstops) exited with no errors.
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] PID 704 (/usr/lib/cups/filter/pdftops) exited with no errors.
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:10 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Read 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Wrote 8192 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Read 3272 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Wrote 3272 bytes of print data...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Sent 216264 bytes...
    D [22/Feb/2014:18:15:11 +0100] [Job 300] Waiting for read thread to exit...
    I [22/Feb/2014:18:15:15 +0100] Saving job.cache...
    D [22/Feb/2014:18:15:15 +0100] cupsdSetBusyState: newbusy="Printing jobs", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:18 +0100] [Job 300] Read thread still active, aborting the pending read...
    D [22/Feb/2014:18:15:19 +0100] [Job 300] PID 705 (/usr/lib/cups/backend/usb) exited with no errors.
    D [22/Feb/2014:18:15:19 +0100] [Job 300] time-at-completed=1393089319
    D [22/Feb/2014:18:15:19 +0100] Discarding unused job-completed event...
    I [22/Feb/2014:18:15:19 +0100] [Job 300] Job completed.
    D [22/Feb/2014:18:15:19 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:15:19 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs"
    D [22/Feb/2014:18:15:19 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:19 +0100] Discarding unused printer-state-changed event...
    D [22/Feb/2014:18:15:19 +0100] cupsdMarkDirty(---J-)
    D [22/Feb/2014:18:15:19 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:20 +0100] [Job 300] Unloading...
    I [22/Feb/2014:18:15:50 +0100] Saving job.cache...
    D [22/Feb/2014:18:15:50 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files"
    D [22/Feb/2014:18:15:50 +0100] Report: clients=1
    D [22/Feb/2014:18:15:50 +0100] Report: jobs=300
    D [22/Feb/2014:18:15:50 +0100] Report: jobs-active=0
    D [22/Feb/2014:18:15:50 +0100] Report: printers=1
    D [22/Feb/2014:18:15:50 +0100] Report: stringpool-string-count=1580
    D [22/Feb/2014:18:15:50 +0100] Report: stringpool-alloc-bytes=8880
    D [22/Feb/2014:18:15:50 +0100] Report: stringpool-total-bytes=27368
    D [22/Feb/2014:18:16:31 +0100] [Client 13] HTTP_STATE_WAITING Closing on EOF
    D [22/Feb/2014:18:16:31 +0100] [Client 13] Closing connection.
    D [22/Feb/2014:18:16:31 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [22/Feb/2014:18:16:32 +0100] [Client 13] Accepted from localhost:631 (IPv6)
    D [22/Feb/2014:18:16:32 +0100] [Client 13] Waiting for request.
    D [22/Feb/2014:18:16:32 +0100] [Client 13] GET /printers/ HTTP/1.1
    D [22/Feb/2014:18:16:32 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [22/Feb/2014:18:16:32 +0100] [Client 13] No authentication data provided.
    D [22/Feb/2014:18:16:32 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@bertrandrussell"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.7.1"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [22/Feb/2014:18:16:32 +0100] [CGI] envp[13] = "USER=root"
    D [22/Feb/2014:

  • I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - Try when connected to another network
    - Update via iTunes on a computer.

  • Wait for Session Data status does not change in EWA

    The hour glass next to the early watch alert in the solution manager system has the status "wait for session data". The SDCCN in the satellite system has the RFC configured correctly and the RFC is working fine when tested. I have installed the latest ST-PI and ST-A/PI for my basis release 640 on the satellite system. The basis release of the solution manager is 701. The self diagnosis button in solution manager does not list any errors or warnings for that satellite system.
    There are no errors in the task Refresh Session task in the satellite system's SDCCN:
    Refresh of session overview started from destination SM_R3SCLNT001_BACK
    > Sessions are up to date
    Refresh of session overview completed from destination SM_R3SCLNT001_BACK
    Any ideas why I can't generate the EWA in the solution manager system?

    Hello, I've got the same problem, went through the note, but it didn't solve my problem.
    Here I can say, that several points from the note are NOT clear (typically SAP...):
    I am falling in the category with ST-PI ... or newer.
    - SDCCN:
    Delete any task 'Maintenance Package' in the 'To do' tab.
    Ensure that no connection to SAP is maintained in:
    SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
    <so I deleted all the RFCs in that location>
    Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
    <surprisingly, now there is a connection that has to be maintained!! Also the 'master' flag is always grayed out for me and never clickable!!>
    Create a new periodic task 'Maintenance Package'.
    <Not working, until I added back my SM_<SID>CLNT<No>_BACK connection>
    - Step 2:
    Re-import the service definitions, c)
    They are saying how to setup the destinations, but NOT how to import the service definitions!
    So, not really sure how to interpret and apply the note... Please help! The satellite system is NetWeaver 7.3 EHP1, Solution Manager 7.1 SPS10.
    It goes on... I found this link:
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CDMQFjAB&url=http%3A%2F%2Fwiki.scn.sa…
    With it, I could transfer the data to the solution manager, but I can only see 'Data is available', when I click it and tell it to start the job, SM:EXEC SERVICES 000000000400100 runs for 6-7 seconds and completes successfully, though the EWA report still says 'Data is available', but no report is being generated. I also re-executed the job SM:EXEC SERVICES and still nothing.

  • GSS stuck in "waiting for configuration data"

    One of my clients have 2 GSS 4900 running ver 4.1(1)
    I can not get the gss service running properly in the one running gssm-secondary. Gssm service looks like it starts but if I check "gss status" och "show system status" in it is waiting for configuration data
    NTM-GSS-002.nt.se#show system-status
    Cisco GSS - 4.1(1) GSSM - standby [Tue Nov 12 16:10:21 UTC 2013]
    Registered to primary GSSM: 10.16.0.15
    Routing component waiting for configuration data (wait a minute). [runmode = 3]
    START  SERVER
    16:01  Config Agent (crdirector) 
    16:01  Config Server (crm)       
    16:01  Database                  
    16:01  GUI Server (tomcat)       
    16:01  Node Manager              
    16:01  Web Server (apache)       
    Ping works fine between the the GSS:es and there is no firewall involved (both are located on the same ip subnet).
    I did gss stop and then gss start. Waited for 24 hours but the status is the same.
    If I run tcpdump on the secondary I can see TCP and UDP traffic between the primary and the secondary though all UDP packets have a bad checksum warning.
    I have no idea on how to t-shoot this. Should I do gss disable,  remove this gss from the primary gssm and enable gss again in the  secondary?
    Any takers?

    Hi,
    There seems to be some communication problem. You can do the following and see if GSS goes to runmode=5.
    On the standby:
    gss stop
    gss disable
    Then, go into the GUI of the GSSM and delete the standby GSS from the
    resources tab
    Then go to standby:
    gss enable gssm-standby x.x.x.x (IP of primary )
    Then in the GUI of primary GSSM, you will again see the standby in the
    resources tab. Click on it, and check on the activate button, then hit
    submit.
    Make sure the standby goes to runmode 5 under "gss status" output.
    If this doesn't work then you can try the below:
    Go to the GUI of the GSSM and delete the standby GSS from the resources tab.
    On the standby:
    gss stop
    restore-factory-defaults
    Make sure you have a console connection so you can do the initial config on the Standby
    GSS (add IP, etc). Once done, enter standby:
    gss enable gssm-standby x.x.x.x
    Then in the GUI of primary GSSM, you will again see the standby in the  resources tab.
    Click on it, and check on the activate button, then hit submit. Make sure the standby goes
    to runmode 5.
    Regards,
    Kanwal

  • App Server Freeze - All threads waiting for replication data

              We are running Weblogic 6.1 SP2, on solaris 8 with jdk1.3 When running load at our
              application - full GC is taking between 15 -20 seconds. At a certain point after
              a full GC on one of the servers in the cluster we see session replication errors
              in the logs. The application eventually freezes - the execute queue is huge on each
              of the JVMS and when we do a thread dump we see that all threads are waiting for
              replication data. All threads have the same stack trace as follows:
              "ExecuteThread: '1' for queue: 'default'" daemon prio=5 tid=0x2c58b0 nid=0xe waiting
              on monitor [0xbf980000..0xbf9819d8]
                   at java.lang.Object.wait(Native Method)
                   at weblogic.rjvm.ResponseImpl.waitForData(ResponseImpl.java:72)
                   at weblogic.rjvm.ResponseImpl.getTxContext(ResponseImpl.java:97)
                   at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:80)
                   at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:135)
                   at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
                   at $Proxy74.lookupROIDS(Unknown Source)
                   at weblogic.servlet.internal.HttpServer.lookupROIDS(HttpServer.java:761)
                   at weblogic.servlet.internal.session.ReplicatedSessionContext.getSessionInternal(ReplicatedSessionContext.java:225)
                   at weblogic.servlet.internal.ServletRequestImpl.getValidSession(ServletRequestImpl.java:2130)
                   at weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.java:1921)
                   at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:107)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2467)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              

              Yes this is reproducable. We are now working with BEA Support under Case : 321199.
              Thanks
              Anna
              Kumar Allamraju <[email protected]> wrote:
              >You should work with [email protected]
              >Can this problem be reproduced with an isolated test case?
              >If yes, it will be really helpful for them to work with Engg.
              >
              >--
              >Kumar
              >
              >anna bancroft wrote:
              >
              >> We are running Weblogic 6.1 SP2, on solaris 8 with jdk1.3 When running
              >load at our
              >> application - full GC is taking between 15 -20 seconds. At a certain
              >point after
              >> a full GC on one of the servers in the cluster we see session replication
              >errors
              >> in the logs. The application eventually freezes - the execute queue is
              >huge on each
              >> of the JVMS and when we do a thread dump we see that all threads are waiting
              >for
              >> replication data. All threads have the same stack trace as follows:
              >> "ExecuteThread: '1' for queue: 'default'" daemon prio=5 tid=0x2c58b0 nid=0xe
              >waiting
              >> on monitor [0xbf980000..0xbf9819d8]
              >>      at java.lang.Object.wait(Native Method)
              >>      at weblogic.rjvm.ResponseImpl.waitForData(ResponseImpl.java:72)
              >>      at weblogic.rjvm.ResponseImpl.getTxContext(ResponseImpl.java:97)
              >>      at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:80)
              >>      at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:135)
              >>      at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
              >>      at $Proxy74.lookupROIDS(Unknown Source)
              >>      at weblogic.servlet.internal.HttpServer.lookupROIDS(HttpServer.java:761)
              >>      at weblogic.servlet.internal.session.ReplicatedSessionContext.getSessionInternal(ReplicatedSessionContext.java:225)
              >>      at weblogic.servlet.internal.ServletRequestImpl.getValidSession(ServletRequestImpl.java:2130)
              >>      at weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.java:1921)
              >>      at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:107)
              >>      at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2467)
              >>      at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
              >>      at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              >>      at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              >>
              >>
              >
              

  • How to wait for a date field to be not empty in Designer workflow

    I am working on a workflow and need to pause the workflow to wait until a date field has been completed.  I am aware of setting dates to a workflow variable of type string to check for null, but there is no way in the Designer workflow to wait until a workflow variable is not empty.
    Does anyone know of a workaround to this?

    Hi,
    I agree with Andrej about using a Textfield as a alternative.
    But, I think you can try to add a new task (set the date value) into your workflow before other tasks.
    Let me know if you have further questions!
    Hope it is helpful!

  • Waiting for 1GB Data Promotion to be added

    I don't know how long it has to take to add the 1GB Data promotion to my account?!  I bought a new phone and renewed my contract for another 2 years on 9/19. I called on Friday 9/19, and one of the customer service reps had to submit a request for it to be added. I followed up twice after and it's still not showing up in my account?  Can someone please help?

    Customer Service didn't say that it'll be added next billing cycle?  They said that it's waiting for approval..it's been over a week and still haven't heard back (phone call or Direct Message) from Verizon Wireless Customer Support

  • Crystal report Viewer Session times out for more data in Portal

    Hi All,         
         I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
    Please help . Please let me know if I am missing something.. Thanks in Advance!!!
    CODE;
    <%@page language="java" contentType="text/html; charset=ISO-8859-1"
           pageEncoding="ISO-8859-1" session="false"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
    <%@page
           import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
           <%@page import="com.crystaldecisions.report.web.viewer.*"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
    <%@page import="java.io.Writer"%>
    <%@page import="java.io.IOException "%>
    <%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
                  <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
           <% response.setHeader("pragma","no-cache");//HTTP 1.1
    response.setHeader("Cache-Control","no-cache");
    response.setHeader("Cache-Control","no-store");
    response.addDateHeader("Expires", -1);
    response.setDateHeader("max-age", 0);
    //response.setIntHeader ("Expires", -1);
    //prevents caching at the proxy server
    response.addHeader("cache-Control", "private"); %>
    <%
           String reportPath,Sharedpath;
           ReportClientDocument reportClientDocument;
                ParameterFieldController parameterFieldController;
                try{
                    reportPath = "reportlocation";
                 Sharedpath = "Target Location";
                    reportClientDocument = new ReportClientDocument();
                    reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                         reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                         reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");              
                         System.out.println("Connecting...");
                       parameterFieldController = reportClientDocument.getDataDefController()
                   .getParameterFieldController();
                    parameterFieldController.setCurrentValues("", "param 1",
                         new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
    parameterFieldController.setCurrentValues("", "Param 2",
                  new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
    reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
           reportClientDocument.close();
           System.out.println("Finished...");              
    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setOwnPage(true);
    viewer.setPrintMode(CrPrintMode.ACTIVEX);
    viewer.setReportSource(Sharedpath);
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
                  System.out.println("Finished...");
           }  catch (ReportSDKException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
    %>

    Hi All,         
         I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
    Please help . Please let me know if I am missing something.. Thanks in Advance!!!
    CODE;
    <%@page language="java" contentType="text/html; charset=ISO-8859-1"
           pageEncoding="ISO-8859-1" session="false"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
    <%@page
           import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
           <%@page import="com.crystaldecisions.report.web.viewer.*"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
    <%@page import="java.io.Writer"%>
    <%@page import="java.io.IOException "%>
    <%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
                  <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
           <% response.setHeader("pragma","no-cache");//HTTP 1.1
    response.setHeader("Cache-Control","no-cache");
    response.setHeader("Cache-Control","no-store");
    response.addDateHeader("Expires", -1);
    response.setDateHeader("max-age", 0);
    //response.setIntHeader ("Expires", -1);
    //prevents caching at the proxy server
    response.addHeader("cache-Control", "private"); %>
    <%
           String reportPath,Sharedpath;
           ReportClientDocument reportClientDocument;
                ParameterFieldController parameterFieldController;
                try{
                    reportPath = "reportlocation";
                 Sharedpath = "Target Location";
                    reportClientDocument = new ReportClientDocument();
                    reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                         reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                         reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");              
                         System.out.println("Connecting...");
                       parameterFieldController = reportClientDocument.getDataDefController()
                   .getParameterFieldController();
                    parameterFieldController.setCurrentValues("", "param 1",
                         new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
    parameterFieldController.setCurrentValues("", "Param 2",
                  new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
    reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
           reportClientDocument.close();
           System.out.println("Finished...");              
    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setOwnPage(true);
    viewer.setPrintMode(CrPrintMode.ACTIVEX);
    viewer.setReportSource(Sharedpath);
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
                  System.out.println("Finished...");
           }  catch (ReportSDKException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
    %>

  • Netfs causing slow boot, waiting for wifi?

    Since adding netfs to the daemons in rc.conf my laptop takes about 30-40secs longer to startup. I realise netfs must be waiting for the network (WiFi) to connect but I have nfsd running as background (@) so I don't know how to fix this.
    Actually I don't need the mounted NFS drive from boot so maybe I can run some script from rc.local to start nfs later and mount the drives?
    My computer has a static IP setup in network client, could I fix the problem above by "hardwiring" the net config from rc.conf, making the WiFi connect faster?
    Last edited by dabbi2000 (2011-11-27 14:10:56)

    nfsd is the nfs server - are you sure you need that running on your laptop?
    You didn't say which network utility you're using, but afaik all of them have some do-this-after-connecting facility e.g. netcfg has PRE_UP/POST_UP/PRE_DOWN/POST_DOWN - I use that to make sure my nfs shares are mounted/unmounted after/before the network comes up/down.

  • If i want to write something that waits for more then one thing

    how do i do that?
    if it's for one thing i'll write:
    sinchronized(a){
    while (true){
    wait();
    my_code();
    }

    He's not saying he wants to wait for multiple
    conditions. Unless I just don't understand what he's
    saying (real possibility there.):) It sounded to me like he wanted to wait for multiple things to happen.
    CountDownLatch works fine for waiting on multiple
    threads. If one thread wants to force the await() to
    end, it can force the latch count to zero. Any thread
    can also call interrupt() on the waiting thread (as
    long as it has a reference to the thread object.)A CountdownLatch set to one can also be used to wait for one of a set of events to occur. Of course you'd need further information to determine which event it was.
    The kinds of "events" can influence the shape of the solution here. Eg if you're interested in muiltiple I/O events then you need to use an I/O framework that supports a select-style operation.

  • Interactive report - Is there an easy way to expand the width of a column to allow for more data on a line.

    Example.
    One of the columns in my interactive report is labelled Notes.
    The data in the column looks like
    I really
    enjoy
    typing up
    notes,
    please
    disregard
    Is there any way to get this note all on one line - or atleast expand the width to increase or decrease the number of characters per line.
    So either
    I really enjoy typing up notes, please disregard
    Or
    I really enjoy typing up notes,
    please disregard
    Thanks in advance.

    Hi Mikez,
    You can also consider to render your "Notes"-column as a textarea, eg:
    http://apex.oracle.com/pls/apex/f?p=vincentdeelen:23:
    For the text area you can define the default number of rows and column width you want. You render a column as text area with an apex_item function:
    select apex_item.textarea(3,NOTES,1,80) from MY_TABLE
    Where 3 is the index number that you want your NOTES colum to have and 1 and 80 stand for row and column width respectively. When you use apex_item for a column, make sure to set that column as "Standard Report Column" under "Report Attributes".
    More info on apex_item:
    Oracle Application Express APIs
    Regards,
    Vincent Deelen

  • Shockwave browser publish waiting for click?

    After I publish my Shockwave3D .dcr file, it seems to take
    forever to activate it. You can look at the output file here:
    Sample of
    Published File
    Is there something I'm doing wrong when exporting?
    Any help would be greatly appreciated.
    Charles

    SuperDMon wrote:
    > The thing is, the sphere does not seem to respond to
    mouse movement until you
    > click on it a few times. Are you having the same
    problems that I am?
    Yes, Same thing happens with me on Mozilla and Internet
    Explorer. Youll need to look
    at behaviors attached to the sphere.
    regards
    Dean
    Director Lecturer / Consultant
    http://www.fbe.unsw.edu.au/learning/director
    http://www.multimediacreative.com.au

  • Is it possible to wait for data using ODIWaitForData on a column of table

    Hi,
    Is it possible to wait for data on a column instead of waiting for data on a table.I knwo there is ODIWaitForData for which I can use the Filter Column and Filter Variable expressions to wait for data.But I do not know what is the value that I amy recevie ,so in a sense I do not know what is the value that I may be expecting.So how else can I wait for the data on a column.Note that I have used even the SQLFilter option in ODIWaitForData..
    Thanks & Regards,
    Pera Mahendra

    Thank you for responding to my post Niel. The HD is completely empty like it's not even formatted and no partitions yet. I have the installation DVD that I borrowed from a friend. I tried to insert it into the external CD/DVD drive, restarted the PC while pressing and holding the C button then I see the apple logo after a while it was showing a not allowed sign, the icon that is circle and has slash in the middle of it. I replaced the HD because my old HD crashed after upgrading to OS X Mavericks.

  • Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema

    Hi All,
    We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
    Regards,
    MD

    Hi Asif,
    We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
    SQL> desc AQ$TBL;
    Name                                      Null?    Type
    QUEUE                                              VARCHAR2(30)
    MSG_ID                                    NOT NULL RAW(16)
    CORR_ID                                            VARCHAR2(128)
    MSG_PRIORITY                                       NUMBER
    MSG_STATE                                          VARCHAR2(16)
    DELAY                                              DATE
    DELAY_TIMESTAMP                                    TIMESTAMP(6)
    EXPIRATION                                         NUMBER
    ENQ_TIME                                           DATE
    ENQ_TIMESTAMP                                      TIMESTAMP(6)
    ENQ_USER_ID                                        VARCHAR2(30)
    ENQ_TXN_ID                                         VARCHAR2(30)
    DEQ_TIME                                           DATE
    DEQ_TIMESTAMP                                      TIMESTAMP(9)
    DEQ_USER_ID                                        VARCHAR2(30)
    DEQ_TXN_ID                                         VARCHAR2(30)
    RETRY_COUNT                                        NUMBER
    EXCEPTION_QUEUE_OWNER                              VARCHAR2(30)
    EXCEPTION_QUEUE                                    VARCHAR2(30)
    USER_DATA                                          TEST1
    PROPAGATED_MSGID                                   RAW(16)
    SENDER_NAME                                        VARCHAR2(30)
    SENDER_ADDRESS                                     VARCHAR2(1024)
    SENDER_PROTOCOL                                    NUMBER
    ORIGINAL_MSGID                                     RAW(16)
    ORIGINAL_QUEUE_NAME                                VARCHAR2(30)
    ORIGINAL_QUEUE_OWNER                               VARCHAR2(30)
    EXPIRATION_REASON                                  VARCHAR2(31)
    CONSUMER_NAME                                      VARCHAR2(30)
    ADDRESS                                            VARCHAR2(1024)
    PROTOCOL                                           NUMBER
    Regards,
    MD

Maybe you are looking for

  • Can a print JUST a complete to do list?

    Hi. I'm trying to print just a To-Do list in iCal. Though the print options would seem to allow you to do this, even if you turn off the "calendars" and "minimonth" options in the print menu, leaving you with just "To Dos" highlighted, you get the ca

  • Menu bar has no 3D menu in my photoshop cs6 BETA? /(win 7)

    my comuter : CPU     :     core i5      m480     2.67 GHz Windows 7 professional RAM     :     4 GB Graphic Card     :     1024 MB (ATI) Dedicated ,     1271 MB shared memo,     2295 MB Total graphics memory.

  • Avoiding Database Logon in Infoview

    I created a Crystal Reports using an Oracle Database. Once the report is completed I saved the report in INFOVIEW under a folder. When I try to run the report from InfoView it asks me for Database Logon again. I have to enter the user id and Password

  • Starting Shared Services Console

    Hi Guys, After successfully installing the Esssbase/EPM I was able to log into Shared Services Console last week. For some reason this week, I only get the 'Internet Explorer cannot display the webpage' now . Apart from installing BI, I haven't reall

  • Synchronisation error

    I have a Blackberry Torch 9800 and Blackberry Desktop Software 7.0.0.59. Since I upgraded the Desktop Software I get synchronisation problems. Before that I didn't have issues. When trying to synchronise I get the following error (translated into eng