Filter creation problem

when i am creating a filter manually ,i get the following message
Invalid syntax in filter line [1] with error number [1200315] - see application log file
and the error code says invalid object type
what doe that invalid object mean?
how to solve this ..........please help
Edited by: lakshmi narayan on Aug 28, 2010 5:36 PM
Edited by: lakshmi narayan on Aug 28, 2010 6:46 PM

Hi,
Please also post the complete version.
regards

Similar Messages

Please Help!!! Deployment failure error Jps servlet filter creation failed.

Hello All,
We are trying to move from 10g to Jdev 11g. We are in the process of deploying the WAR application to weblogic server. However, we keep getting one error after another. This is the latest one:
[12:40:02 PM] [Deployer:149193]Operation 'deploy' on application 'webapp1' has failed on 'AdminServer'
[12:40:02 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application webapp1 on AdminServer.: JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory...:oracle.security.jps.JpsRuntimeException:JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory....
[12:40:02 PM] Weblogic Server Exception: weblogic.application.ModuleException: JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory...:oracle.security.jps.JpsRuntimeException:JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory...
[12:40:02 PM] See server logs or server console for more details.
[*12:40:02 PM] weblogic.application.ModuleException: JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory...:oracle.security.jps.JpsRuntimeException:JPS-00063: Jps servlet filter creation failed. Reason: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsPlatformFactory...*[12:40:02 PM] Deployment cancelled.
I am sorry to have made the post title so eye catching, but we keep getting issues, one after the other and we are fast approaching the deadline for this upgrade. Thanks for being understanding.
Please help!!!
Edited by: user12054715 on Aug 29, 2011 7:16 PM

UPDATE:
I have been trying to find the class JpsWlsPlatformFactory and some sites say that it is present in the jar - jps-api.jar. So I looked in D:\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1 and found a jar called jps-api.jar but the class JpsWlsPlatformFactory was not there. I also tried to find this class on the web but no success.
This is very wierd that oracle.security.jps.wls.JpsWlsPlatformFactory is nowhere to be found on the internet!!!
NOTE: Our application is based on JSF/ADF.
Please help!
Edited by: user12054715 on Aug 29, 2011 9:43 PM

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Filter Function problems on ALV report. [Resolved]

Hi,
I developed an ALV report by using function as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
         EXPORTING
              I_CALLBACK_PROGRAM = G_REPID
*            I_CALLBACK_PF_STATUS_SET = status_set
*            I_CALLBACK_USER_COMMAND = USER_COMMAND
              I_STRUCTURE_NAME = 'T_BSIK'
              IS_LAYOUT        = GS_LAYOUT
              IT_FIELDCAT      = GT_FIELDCAT[]
         TABLES
              T_OUTTAB    = TAB_BSIK.
And this ALV custom report is referenced from standard function FBL5N.
After i completed this report, i made an comparision of FBL5N and my custom report.
When I apply the filter function, for example, on the document type, I cannot input 2 characters in the document type field under the filter function. The field length is only 1 character. Similar case results on the field document date.
While the standard function FBL5N works very nice.
What should i do to make the filter function of my own ALV report as the same as the standard function FBL5N do?
Thanks in advance.
Lala
Message was edited by:
        Hoo lala

Oh, i found where the problem is...
add below 2 statements, then the question is resolved.
LS_FIELDCAT-ref_fieldname = ****
LS_FIELDCAT-ref_tabname = ***
FORM FIELDCAT_INIT tables RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-COL_POS   = 3.
LS_FIELDCAT-FIELDNAME = 'BLART'.
LS_FIELDCAT-TABNAME   = 'TAB_BSIK'.
LS_FIELDCAT-SELTEXT_L = 'Document Type'.
LS_FIELDCAT-ref_fieldname = 'BLART'.
LS_FIELDCAT-ref_tabname = 'BSIK'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
endform.
Fine now.
Lala

Remittance challan creation problem in Cross company code scenario.

I made to Advance payment to Cross comany code while posting time we deduct the TDS amount. at the time remiottance challan creation i got bellow error.please help to me
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Edited by: TEEGALA SATISH on Jun 15, 2010 5:43 PM

Hi ...Actually i am getting same problem in challan creation.. Did you get any solution? ...

Process order creation problem

I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
How to resolve the issue.

Check in CORW and switch off batch creation to isolate the problem if needed. Also see whether you have any batch managed compoents for which you have set master data for automatic batch determination.
There is no setting for material types and plant for batch. May be the error message is not correct. What is the message number?

New Excise Invoice Creation - Problem

Hi All,
I am facing problem in creation of Excise Invoice. I dont know the step by step process, can any one help me to get this ?
Best Regards
Chintesh Soni

Hi Chintesh,
if you are referring to a 100% tax invoice, please see note [887917|https://service.sap.com/sap/support/notes/887917] for 2 workarounds.
All the best,
Kerstin

Logical Standby Creation Problems "Create STatus Unknown"

We are using Grid Control 10.2.0.3 on Oracle 10.2..0.3 databases, Windows 2003 sp2 machines.
We have a primary and fsfo physical standby working properly. We went to create a logical standby on a separate server and had problems. it turned out that the listener on the server was not discovered on the target. we fixed that problem and finished the creation of the logical standby and it seems to be functioning properly now.
However, the status on the data guard page for the logical standby shows Create Status Unknown and we are unable to proceed on to create an additional standby database for other purposes. We have tried removing the logical standby target and re-discovering it but status still shows Create Status Unknown.
Is there any way to clear this status without having to drop the logical standby and completely recreate it.

The status on the agent shows it uploading successfully.
We resolved the issue by removing the logical standby from the configuration and selecting to retain the log apply. We then re-added the standby selecting to manage an existing standby database and the status went to normal.

In a document library : group by view and manage metadata filter & Navigation problem

Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
navigation :
- all the documents appear under my group by, even the ones that does not correspond
- In the other hand, the number in brackets shows the correct number of documents that should be shown
See screenshot below.
Did you already encounter that issue ? Is there a workaround ?

Hi,
According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
to show the corresponding documents with the correct numbers in SharePoint 2013.
In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
library. As a result, it showed only items matching the filter values.
So, I recommend that you can follow the steps to implement it in your environment.
Step1: Enable Metadata Navigation and Filtering:
Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
If it is not enabled for your site, you can enable it on the Site Features pages for your site.
You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
1. Go to “Site Settings” and click “Manage site features” under Site Actions.
2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
Step2:
Configure Metadata Navigation:
You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
1. Open the document library for which you want to configure metadata navigation.
2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
7. Click “OK”.
Step3: Set a group by two columns by modifying view in the document library:
1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
3. Click “OK”.
Step4:
Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
The result will like as below:
There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
Best Regards,
Linda Li
TechNet Community Support

Date of creation problem after making Bridge create TIFs with PS Image Processor.

I went through about 100 files and did what I wanted in Camera RAW (started out with NEFs). Thereafter I had Bridge make TIFs of all the files in the folder using the PS Image Processor.
Now, looking at the TIF folder in Bridge, I find that about 80 of them has a wrong creation date (I checked the Preferences and I have asked for the date of creation - and not the date of modification). As I watch (several minutes) Bridge changes some of the dates to the ones known to me to be correct - but not all. If I close Bridge, restart Bridge and open the folder again the same happens, i.e. it starts all over. Even stranger is that the Windows Pathfinder have problems with the same files - i.e. does not show the date of creation at all.
The date of these 80 files are all the same - and they have been edited over several days!
I have done a lot of work on those files and would hate to start all over. I checked and of course the dates are the original in the RAW folder that I started out with.
I am sure that I do not have any bugs in my PC.
Can I remedy this i any way? I hate to have wrong dates on my files.
What can I have done to cause this? Can anyone help me? Thanking You in advance.
Git

Thank You again.
Yes, I have also purged the cache. More than once and again this morning. It does not change the result. Bridge still goes from the date January 13th 2013 to the correct date of creation when I look at the separate thumbnails - and back again when I scroll down the page and subsequently scroll up again!
Thus it seems that Bridge knows the date that the camera set but somehow this foolish January date keeps coming back.
All the folders with NEFs have correct dates - also the ones where I have imported the files from camera to pc in 2013! Only my TIFFs have this problem.
Rigth now I am having Norton 360 run a complete system scan. When that is done I will inactivate Norton (I know that I cannot have 2 antivirus softwares and firewalls run simultaneously on the PC) and instead run a complete scan with Lavasoft Adaware Pro. I have also used Norton Utilities and found no problems. Plus Malwarebytes Antimalware and Superantispyware. No problems.
If "date file created" is the date that the file was modified, it would not help me much. I often go back to a file and play with it again and if I have understood correctly, then this date would change again. I want to see the date of capture ("date created"). Also, by now the problem afflicts at least 1000 files. It would be impossible to do single file manual corrections of dates on so many files.
Update: While I have been writing this, an opened folder with only 36 files has changed the dates to the correct date of capture. I could also scroll up and down without the dates changíng in this small folder. But when I closed Bridge, restarted it and looked at the folder again Bridge again did need minutes to get all the dates rigth. Maybe I have a pc capacity problem instead of a software problem? But why on earth would this specific wrong date result from a too weak pc.?
Maybe I should just give up and reinstall PS?
Sorry if I trouble You with a ridiculous problem.
Git

Filter Key problem in table without ALV

HI,
I have two tabs in my view. In Each tab I have a table which are binded to different nodes.
Now i am applying FILTER for these two tables using Toolbar UI Element. I have created a ToolBar Toggle button inside this.
In the action (DO_FILTER)of this button i am using the following code.
IF table_1.
in any case clear the table's filter strings
l_node = wd_context->get_child_node( if_v_1=>wdctx_n_node1 ).
l_node->invalidate( ).
if the filter is off: show the whole shebang
wd_this->table_method_hndl->apply_filter( ).
ELSEIF table_2.
in any case clear the table's filter strings
l_node = wd_context->get_child_node( if_v_2=>wdctx_n_node2 ).
l_node->invalidate( ).
if the filter is off: show the whole shebang
wd_this->table_method_hndl->apply_filter( ).
ENDIF.
In the modify view i am calling this action 'DO_FILTER' for applying my filter option. Now when i run my program the filter keys are working fine.
I am having the problem for the belowing scenario.
1. In tab1 i have 5 rows in table. I apply filter and getting 2 rows in table.
2. Now i use select tab to go to tab2 and there i have 6 rows.
3. Now again i go back to tab1. My problem comes here.
Now it is only displaying 2 rows in table1. (The first two rows in the total no. of 5 rows). (Two rows because in filter only 2 rows where displayed.)
Note: In the select tab when i debug i am able to notice that the internal table which is binding to table1 is having 5 rows and not 2 rows.
My modify code has the following code.
    IF lv_a_sel_tab = 'TAB1'.
Get reference of the table view element
      l_table ?= view->get_element( 'TABLE1' ).
Get reference to the Filter & Sorting API
      wd_this->table_method_hndl ?= l_table->_method_handler.
Set or cancel the table's filter action
      IF lv_a_checked = abap_true.
        l_table->set_on_filter( 'DO_FILTER' ).
      ELSE.
        l_table->set_on_filter( ' ' ).
    ENDIF.
   ELSEIF lv_a_sel_tab = 'TAB2'.
Get reference of the table view element
      l_table ?= view->get_element( 'TABLE2').
Get reference to the Filter & Sorting API
      wd_this->table_method_hndl ?= l_table->_method_handler.
Set or cancel the table's filter action
      IF lv_a_checked = abap_true.
        l_table->set_on_filter( 'DO_FILTER' ).
      ELSE.
        l_table->set_on_filter( ' ' ).
      ENDIF.
    ENDIF.
Please tell me how to make these deactivation rows active, so that all rows will be displayed when selecting the tab.
Regards,
Delphi.

ommit

Filter refreshing problem

Hello, we are trying to refresh filter on a master table as you change pages. Both the pages use the same data control and if i search for the country Finland the results follow me as I move to the other page. Is there any way to avoid this problem.

If your using BEx Web for executing this query, try deleting the cache on your browser before re-executing the query with the new Sales Rep. The other thing you may want to consider is adding the following code prior to the READ TABLE statement:
CLEAR: ls_var.
This will ensure that the variable being read into won't have any values in it before it's being populated.

RAID creation problem,

When I try to create RAID sets, both mirrored in Disk Utility, one set works perfectly while attempting to create the other set results in the error message: "Creating RAID set failed with error: Could not find RAID"
I've tested the disks with Techtool Pro and there were no errors found on either. I have also used the repair/rebuild function in DiskWarrior on both of them as well as the repair permissions and repair disk functions in Disk Utility.
After the above error the 2 drives involved do not show up in the finder, but are still present in Disk Utility as unmounted disks. In order to act on them again they have to be initialized/formatted. After doing this they show up again, but any attempt to create a mirrored set with them continues to fail.
Is there anything that can be done to fix this? Or are these bad drives that are good at hiding it (no bad sectors, all tests+).

From your comments, I guess you are using 4 disks and trying to create two Mirrored RAIDs at the same time? If that's the case, you might try just creating 1 set using two disks, then quit Disk Utility. Launch Disk Utility, then try creating the second set using the other two disks. If that doesn't work, you might try rebooting in between RAID creations. If that doesn't work, you might try the work around seen here;
http://forums.creativecow.net/archivethread/71/480772
"2) Create 1st stripe from two devices, don't do anything to the other two yet. Shutdown Mac and turn off the power to the devices of the 1st stripe, leave the power on to the two un-stripe devices. Boot and stripe the 2nd pair, shutdown Mac. Turn power back on to the 1st stripe and reboot (all power to devices are on). Both stripes should be on the desk top."
Personally, that 'solution' seems a little dated. Disk Utility has been able to create more than one set for a while now. I just tried it. I have a Stripped BootRAID using two disks, I used a partition from another internal disk and an old external disk, connected by USB2, to create another Stripped RAID. Then I broke the new Stripped set and created a Mirrored set. I didn't have any problems creating either. I had two stripped RAIDs on a FW800 G4 running Tiger a couple years ago...
Good Luck

Generic Data Source Creation Problem....URGENT!!!!!!!!!!!!!

Hello BW Experts...!
I need to create a Generic Data Source out of a table called VBSEGK... I was trying in the usual way with RSO2 , but when I press save button after entering the Table name the following error is coming:
" Invalid Extract Stucture Template VBSEGK of Data Source ZPARK_01"
and when I click on the error message its showing
Diagnosis
You tried to generate an extract structure with the template structure VBSEGK. This operation failed, because the template structure quantity fields or currency fields, for example, field DMBTR refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
VBSEGK is a standard table , so I cant change the Table structure. Can any one give me some idea of how to create Data source with this table ASAP ASAP please....
Please ask me questions if you didnt get this...
thanks

Hi Harish,
Please check OSS note 335342.
Symptom
The creation of a generic DataSource which is extracted from a DDIC view or a transparent table terminates with error message R8359:Invalid extract structure template &2 of Datasource &1
Other terms
OLTP, DataSource, extractor, data extraction, generic extractor
Reason and Prerequisites
The problem is caused by a program error.
Solution
The table or view used for extraction must have currency and unit fields within the field list of the table/view for all currency and quantity key figures.Otherwise the consistency of the extracted data cannot be ensured.To make the generation possible, check whether all key figures of your table refer to unit fields that are within the field list.If this is not the case, there are two possibilities:
1. A table is used for extraction.
Create a view in which you have a currency / unit field contained in the view for each key figure. The currency / unit field from the table must be included in the view to which the key figure actually refers.
Example:
Field WKGBTR of table COEP refers to the unit field WAERS of table TKA01. In a view that contains field COEP-WKGBTR, table TKA01 and field WAERS must be included in the field list.
If the currency or the unit a key figure refers to is not located in a table but in a structure, the key figure has to be removed from the view and read via a customer exit (see below). Structures cannot be included in a view.
ATTENTION!! Often the key of the table in which the referenced unit is located, does not agree with the key in the table with the corresponding key figure. In this case, the join condition of both tables is not unique in the view definition, that means for each key line of the table with the key figure, several lines of the table with the unit may be read: the result is a multiplying of the number of lines in the view by a factor corresponding to the number of lines that fit the key figure, in the unit table. To be able to deliver consistent data to a BW system, check whether the unit of the key figure in question should always have a fixed value. If yes then you can determine that in the view definition via 'GoTo -> Selection conditions'. If no, then you must proceed as follows:
a) Remove the key figure from the view
b) Define the DataSource
c) Enhance the extract structure by key figure and unit for each append (Transaction RSA6)
d) Add the key figure and the unit in a customer exit
2. A view is already used for the extraction
If it is not possible to obtain a unit of measure from a table on which the view is based, the unit field must be deleted from the field list.
A note in relation to the upward compatibility of BW-BCT InfoSources: BW-BCT 1.2B was not yet able to check units and currency fields. For this reason, it is possible that InfoSources which were defined in the source system as of BW-BCT 1.2B must be redefined as of 2000.1 in the manner described above. However, checks are absolutely essential for the consistency of the extracted data.
Regards,
Praveen

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Filter creation problem

Similar Messages

Maybe you are looking for