Filter data on any one of the field in Hirarchical ALV?

Hi,
Can any one tell me if I am using Hirarchical ALV for outputting the data, and I have to filter out the output data on any one of the column in the Hirarchical ALV, Is it possible ?
Can we filter out the data on the basis of field which is not the key field in the Hirarchical ALV?
Mrunal

Try using IT_FILTER...SLIS_T_FILTER_ALV...I guess...
santhosh

Similar Messages

Date differences if one of the field not presenting

Hi All,
I have two attributes start date and end. I have created formula replacement variable.
some times one of the field coming as blank, in such acase system writing some garbage value but i need blank.
How to resolve this issue.
Reagrds,
J B

Hi,
You can create a new formula in query designer with a condition such that date difference doesn't fall in the invalid value. If it that invalid value put the result as '0'.
http://help.sap.com/saphelp_nw04/helpdata/en/23/17f13a2f160f28e10000000a114084/frameset.htm
If the output is showing as '0' for the invalid values then in the query properties select the Display zeroes as Do Not Display Zeroes.
http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
Hope this helps.........
Rgs,
Ravikanth.

Additional validation for one of the fields in down payment request

Hi All ,
I have a requirement for doing some additional validation for one of the fields in down payment request
(F-47) .
I need to validate a field u2018Assignmentu2019 in the down payment request .
Here, assignment field is mandatory and user has to enter a valid contract number. Then we have to validate the contract number entered against the tracking number field (BEDNR) in EKPO table corresponding to the vendor.
If the contract number entered is incorrect, then system displays a message with the valid contract number. The user can modify the assignment field with this contract number. Once the field is modified, system once again validates whether the contract number entered is valid.
Can you please provide me your valuable inputs how to achieve this.
Regards,
Tripti.

Hi Vishal ,
Thanks for your reply. I tried searching for them but couldn't find any.
Regards,
Tripti.

Can any one share the Oracle Reports 6i Developer demo table scripts?

Hi,
I have to learn the Report 6i for my office project, I have installed the report 6i developer but I could not get the Demo CD, can any one share the Scripts for table (viz. Stock, stock_history , indcat ) creation and also the insert script for data population or provide the URLs where I can find the same.
thanking you in advance.
regards,
Sham.

Hi Denis,
Thanks for the reply, I have the setup for forms and reports 6i, what i was looking is the script to create the tables used in the
Oracle® Reports Developer
Building Reports
Release 6i
January, 2000
Part No. A73172-01
the table names are stocks, indcat etc, generally these demo script come along with the demo CD provided by oracle as i don't have the CD i am looking for these table creation script. if you have these scripts kindly share the same with me.
regards,
Sham.

Checkbox as one of the field in the internal table in the list

Hi,
I have a requirement of processing the certain records of the internal table for which checkboxes are selected in the list.
The selected records need to be updated in the custom table and the unselected records need to be ignored.
I have created the PF status and the application tool bar and a button on the tool bar.
Then when the report is executed the list is displayed with the records with one of the field as a checkbox.
At user-command.
Then in the at user-command handling the button click event.
I want to know which records are been selected and which are not.
If some one knows please let me know.
Thanks
S Patel

This is exactly what you need to do:-
PBO
CREATE OBJECT g_custom_container
         EXPORTING container_name = g_container.
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Select data from your table
PERFORM select_data CHANGING pt_outtab[].
Build fieldcat
PERFORM build_fieldcat CHANGING pt_fieldcat.
Exclude standard buttons from the Toolbar
PERFORM exclude_tb_functions CHANGING lt_exclude.
Display output in ALV grid
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      it_toolbar_excluding = lt_exclude
    CHANGING
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
PAI
Get modified data
CALL METHOD gv_grid->check_changed_data.
LOOP AT gt_output INTO wa_output WHERE zzchkbox EQ c_x.
    MOVE-CORRESPONDING wa_output TO wa_selblk.
    APPEND wa_selblk TO lt_selblk.
ENDLOOP.
This method will give you all the records which are selected in the list output. Collect them and modify your custom table.
Edited by: Rudresh Chand on Feb 28, 2010 8:26 AM

One of the field is disabled(input not possible) after upgrade in FPE1

Hi ABAP Gurus,
I am working on FPE1 Transaction Code and i just find out that after upgrade one of the field on screen is not input possible but before upgrade we have that field as input/output possible .
so now we want same functionality what we have before . so which path do i need to follow because its standard screen .
any suggestion is appreciated .
Thanks,
Jack
Edited by: jack troy on Jun 24, 2009 7:36 PM

Hi Ajay,
Thanks for your reply . My question is can we enable field for input using transaction variant .because if i go to screen layout for FPE1 , i can see that this field is only output possible .
Thanks,
Jack

Need to update row in the table if any one of the value is getting updated

Hi All,
I am new to SQL, I need to update the table's row if any one of the value of the row is getting updated, if none of the value is updated then do nothing.
Advice requested

It is not clear what you meant... Perhaps a trigger
CREATE TRIGGER ShowUpdatedColumns ON Test FOR UPDATE
AS
DECLARE @ColumnID int, @Columns nvarchar(4000), @ObjectID int, @LastColumnID int
SET @ObjectID=(SELECT id FROM sysobjects WHERE name='test')
SET @LastColumnID=(SELECT MAX(colid) FROM syscolumns WHERE id=@ObjectID)
SET @ColumnID=1
WHILE @ColumnID<=@LastColumnID BEGIN
IF (SUBSTRING(COLUMNS_UPDATED(),(@ColumnID - 1) / 8 + 1, 1)) &
POWER(2, (@ColumnID - 1) % 8) = POWER(2, (@ColumnID - 1) % 8)
SET @Columns = ISNULL(@Columns+',','') + COL_NAME(@ObjectID,@ColumnID)
SET @ColumnID=@ColumnID+1
END
PRINT 'Updated columns are :' + @Columns
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to add dynamic data type as one of the terminals of a Custom VI

Hello,
Can anybody tell me if it's possible and how to add a dynamic data type as one of the terminals of a sub-VI? I would like to have a terminal that I can connect signal from DAQmx to my sub-VI. Thanks.

Here is one of the coolest things about LV, and one of its major advantages over languages like VB - it has automatic memory management and it compiles whenever you make a change. This allows you to be very free in the way you handle data and change your code. In this case, you should note the small gray dot that appears when you wire the dynamic data into the Array of Waveforms input. This gray dot means that LV coerces the source data type (DDT, in this case) to the target data type (Array of waveforms). If it wouldn't match, you would get a broken wire, the VI couldn't run, and if you hover over the wire or press the broken run button you would get an exact description of the error. Cool, eh?
This can also be seen in other things. For example, you can change an array's data type or number of dimensions by simply doing it. This will automatically be reflected anywhere the array is called in the program, and if anything won't match, the VI will be broken. If you change the # of dimensions of an array, any array function which that array is wired to will adapt. This allows you to be very safe in the way you write code, because you have LV watching all that annoying stuff for you. You don't have to worry about misspelling a variable here (for the most part).
One important point about coercion - it does take processor power. This will usually only be evident in large arrays or loops, but it is an important point. Another thing is that coercing numeric types can cause you to lose data - coercing a DBL to a U16, for example, will cause you to lose all the fractional data.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

Any one used the interface /RPM/IF_PFS_ITEM and form /RPM/FORM_PFS_ITEM

Hi Friends,
Any one used the above interface and form
Regards,
sasidhar

Hi Karen,
It seems to me that because the decision point happens before the tabular form is rendered (via the tree right?) you don't really need a "On Change" DA.
I think you either need find the hms field c030, which could be hidden or visible, as depending on that value go hide or show the hms_info field.
You'll want to do this either on Page Load or After Refresh or both, it depends on how the tabular form gets refreshed.
Your DA On Load would be
Event: Page Load
Action: Javscript Code
The code:
$(".hms").each(function(index) {
if ($v(this) == 'N') {
var rowTR = $x_UpTill(this, 'TR');
$(rowTR).find(".hms_info").hide();
This code will find ALL your hms fields. if the field has a N then we go up to the TR, find the hms_info and hide it.
If your page refreshes on every row and the Y/N values don't change after the page loads then you're done!
What do you think?
Thanks
-Jorge
PS. This is odd... I thought I was replying to the previous thread. Weird.
Message was edited by: jrimblas

To replace values of one of the field in the database table

How to replace values of one of the field in the database table with a new values? Pls help to solve

Hi
You can use the UPDATE command to update one of the field value in a table
see the UPDATE syntax and use it
but in real time you should not do like this
Regards
Anji

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

I wish to modify the name of one of the field name in the sales order.

HELLO GURRRUS,
i wish to modify teh name of one of the field name in the sales ordder.
what is the procdure,path and steps involved in that.it would be of great help of me if u take some time and suggest me.
bye take care hav a happy and peaceful life

Hi Sameer,
If you want to change the name or description of the field in the Sales order,
you have to use the userexit MV45AFZZ and use the Form USEREXIT_FIELD_MODIFICATION.
Get the help of the ABAPer and decide where do you want to make the change in the Header or the Line items. Accordingly give the requirements to the ABAPer.
He will do it.
Thanks
Augustine Ponraj

Can any one have the oracle AIA certification dumps

Hi All,
can any one have the Oracle AIA certification dumps please provide.
Thanks,
Siva

Hi All,
can any one have the Oracle AIA certification dumps please provide.
Thanks,
Siva

Does any one know the hot key / command to hard delete from an external Drive

Does any one know the hot key / command to hard delete from an external Drive (i.e. delete direct without having to put in trash first)?

Nothing happens on a hard drive that doesn't involve the computer.
Here's a list of all the keyboard shortcuts. I don't see anything such as you have described, so perhaps you once used a keyboard macro or have not described what you mean properly.

Can any one explain the concept of Hash ( # ),

Hi All,
I am generating the report on Billing Cube.. for that cube I have DS 2lis_13_vdhdr, 2lis_13_vditm,
I am executing the report with characteristics Material , Billing Number and Key Figures Billing Value.
For Example : I am seeing the report By Material , in last line it is showing Hash ( # ),
When I am drill down by material by Billing no with Billing value.
Now it is showing the billing value agents the Billing Number and in the same time it is showing hash for the same Billing Number.
Eg:       Material     Billing No     Billing Value
     120          199001     400 USD
     122          199002     500 USD
     125          199003     300 USD
     #          199001     000.00
               199002     000.00
               199003     000.00
Can any one explain the concept of Hash ( # ), and why the Billing No is reputing in Hash..
I have same problem in other Cubes with other Characteristics
<b>How can I permanently Restrict Hash.. my user dont want to see in report..</b>
Regards,
Shaik

Shaik,
since the thread in the Business Explorer forum has been marked as answered , I assume that this thread can also be closed as answered ... please assign points and close as answered..
Arun
other post
How can I permanently Restrict Hash..in Query level ( # )

Filter data on any one of the field in Hirarchical ALV?

Similar Messages

Maybe you are looking for