Filter dependent BADI TRIP_POST_FI is not calling.

Hello Experts,
I am trying to use the BADI TRIP_POST_FI, this is related to interface IF_EX_TRIP_POST_FI.
But the standard class CL_EX_TRIP_POST_FI is already using this interface, and has imple-mentation for all methods.
So, although I can create a new implementation using definition TRIP_POST_Fi it is never exe-cuted because the system is is using the standard implementation.
What can I do in this case ?
Thanks

Hai,
Try to create new classic BADI implementation for TRIP_POST_FI in SE19 then Z class will be created.
And in SE24 you can go to that class and you can use the method what ever you want.
Thanks

Similar Messages

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

How to Pass Filter value to Filter dependent BADI ?

Hi,
I am having some doubt related to CRM Badi's there are two types of BADI's one is Muliple use badi and other in Filter dependent BADI.
    Incase of filter dependent BADI. when we are creating implentation for filter BADI how to pass this filter value to that new implentation.i.e. if we are going to see the importing parameters for Each method of that Filter Dependent BADI.   the 1st importing parameter for each method is FILTER VALUE for each method in Filter Dependent BADI.
      So my question is that how to map this filer value while creating new implentation for Filter Dependent BADI ?
     It will Automatically get this importing filter value or we have to do any coding for this ????
for this you can refer badi : CRM_ISA_BASKET_HEAD
this Badi defination is filter dependent.
Please let me clarification for this .perfect answer will be rewarded !!!!
Regards,
Amol Tambe
SAP CRM Technical Consultant.

Hi,
If this is the case. Then what is the use of filter in that if it is automaticaaly getting mapped i.e. How the filter will restrict the use for Badi ??
          I am not getting it ??????
Because for every simple badi when we are going to creat the implenation it will work fine without any restrictions by getting all importing values automatically.
And incase of filter depednt Badi also its going in same way it will get its filter value automatically so both the cases are same for Filter dependent badi and simple badi.
Then what is the use of Filter value ????
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

Filter Dependent BADI - All Country codes to be included

Hi,
I am using a BADI 'CMS_RE_LR_DIALOG' which has a filter type 'CMS_RE_DTE_LR_ID'.
This BADI is used in conjunction with a screen field that can take as inputs the 'country codes'. However currently this BADI has only one implementation for the country code 'DE' (Germany) and this is a SAP implementation and should not be modified. The requirement is that I need to include all the country codes in this BADI so that the associated transaction is executed for all country codes.
Could anyone brief me how this could be done? One procedure would be to create an impl each for every country code, however this is not a feasible solution. Is there any other way in which we can pass all values in a structure to the filter type? I tried using the data element LAND1 for this purpose, but not getting the required output with it.
Kindly pitch in your inputs as to how this could be implemented.

filter is implemented in se18 in badi definition.
certain times u may require to implement certain checks based on country so u can specify the country element as key and implementa filter dependant badi.
кu03B1ятu03B9к
Edited by: kartik tarla on Feb 15, 2009 12:46 PM

BAdI HRPAD00INFTYDB is not called

Hi there!
I encountered the problem that the BAdI HRPAD00INFTYDB is not called on any update of infotype 2002. The mentioned infotype is updated by the report RPTARQPOST, after this update I want to have some code executed in th method UPDATE_DB. We are using ERP2005 an EP7.
In addition I implemented my code in BAdI HRPAD00INFTY, too. But this one is not called either.
Maybe somebody could tell me if one of the BAdI are called at all!?
Thanks and best regards,
Michael

Hi,
Have u activated your BADI?
Go to se19 n create implementation for the concerned badi there.
Click on the method in which u want to add ur code..save code and check it.
Go back and then activate the BADI.
Regards,
Manoj.

Filter Dependent BAdI

Assume I have implemented the following BAdI:
BBP_DOC_SAVE_BADI
Furthermore, assume I have defined a single filter value: BUS2200
Does this mean that my BAdI implementation will be called ONLY
when the filter value is BUS2200.
Is it possible that the implementation will be called for other
filters like BUS2121 and BUS2201?
The reason I ask is this:
Do I have to check the filter value in my implementation to make sure
it is being called for BUS2200? If so, what's the purpose of defining
the filter value in the BAdI implementation?

Do I have to check the filter value in my implementation to make sure
it is being called for BUS2200? If so, what's the purpose of defining
the filter value in the BAdI implementation?
In the filter you need to specify the variable which contains the desired value.
Like:
W_BO_TYPE = 'BUS2201'.
GET BADI badi_inst
FILTERS bo_type = W_BO_TYPE.
This code will not get any instance of the BADI as you don't have the implementation for this BUS2201. If your variable W_BO_TYPE contains the value BUS2200 than you would get the BADI instance which contains your implementation.
Regards,
Naimesh Patel

Filter for BAdi CRM_ORDER_STATUS does not work in WebUI

Hello,
we have made an implementation for BAdi CRM_ORDER_STATUS for our sales cycle.
In detail:
The BAdi implementation shall be triggered if the user sets a special user status within an opportunity.
Therefor we have used the standard filter functionality provided by this BAdi (giving the correct header status profile and user status).
Using transaction CRMD_ORDER in SAP GUI, creating an opportunity and setting the special user status -> the BAdi implementation is triggered as expected.
But: If we are using the WebUI the done BAdi implementation is triggered at every roundrip caused by creating/editing an opportunity and not only at setting the user status.
Does anybody of you made similar experiences with using BAdis in WebUI (SAP CRM 7.0)?
Cheers,
André
**EDIT***
It´s possible coding the filter within the BAdi implementation.
But we prefer using the provided SAP standard.
Edited by: Andre Schillack on Apr 23, 2009 8:47 PM

Hi Andre,
I just checked my system CRM2007 and below is what I found in WebUI mode:
During the build of DDLB for Status field, it calls method cl_crm_uiu_status_info=>get_status_info. What it does is:
1. It derives all status codes for the user status profile (based on customizing)
2. And then for each status code, it triggers the BADI based on filter value. In the BADI, customer can decide whether the particular status (filtered value) is allowed to see in the DDLB.
Since it is building the DDLB for Status field every time there is change on the opportunity and therefore DDLB method calls the BADI every time to build the Status code list.
If you want to do further processing based on status change in the method BEFORE_CHANGE, you can try the following code.
if is_status_wrk-active_old = 'X' and
is_status_wrk-user_stat_proc = 'CRMACTIV' and
is_status_wrk-status = 'E0002'.
Do something
endif.
I hope I have not confused you.
I feel that this is standard behaviour in WebUI. You may want to check with SAP OSS also.
Regards,
Paparao Undavali

Need to create a filter in BADI

Hello Experts,
Iu2019ve a requirement and according to it I need to Create a filter BUKRS in the BADI definition which makes the BADI call acceptable only when Company Code is XXXX and XXXX.
Can somebody tell me which BADI I should use?
Thanks,

Hello.
If it is a custom BADI please check the box available in BADI definition (SE18) attributes.
Step1 - Check the check box Filter in BADI attributes. So that I will enables the filter field and there you need to choose BUKRS.
Step2 - By doing step1 system adds one more parameter flt_XX to all the methods available in BADI definition.
Now you need to pass this variable when you are calling the proxy call in the actual application.
If it is standard BADI you need to check the filter dependent BADIs so that you can impliment them for specific Countries.
All the best. Let me know if you need any more help.
- Mohan.

You must specify the a of filter if you want to save you filter- dependent

I get this message when I try to save an implementation for BADI : NOTIF_EVENT_SAVE
Specify filter types
Message no. ENHANCEMENT213
Diagnosis
You must specify the a of filter if you want to save you filter- dependent BAdI implementation.
System Response
Without a filter type, the implementation cannot be saved.
Procedure
Enter a filter type.
The filter type already exists. This is a standard SAP BADI.
There are related notes but not for my ECC 6.0 release.
I am using: SAP_BASIS 700 SAPKB70013
Has anyone had this problem?

I think u have already had ur Document Types.
Now using Tcode Se18 u will goto BADI. There U will Select Implementation --> Change / Display.
Now at below u will see Filter Dependent Check Box Checked which means that the BADI requires a filter.
Below that u can enter Ur document Types as filters for which types only u want the BADI to be processed. If u want all the Types to be entered and as the BADI is Filter Dependent , u have to enter all the Document types. Now the BADI is triggered only for the Documents containgin that Document type u entered in the filter only.
awrd points if useful
Bhupal

Creation of filter dependent Custom BADI defination.

Hello,
How to create a custom BADI definition (ECC 6.0), so that I will be able to make it filter dependent.
I need to create an implementation of the same as per Logical system name filtering for ALE processing.
I tried to create Enhancement Spot and then created BADi but not able to make it filter dependent.
Please suggest.
Thanks.
Edited by: Parthasarathi Mohanty on May 20, 2011 2:46 PM

Hi,
I tried to create an independent custom BADI definition and make it filter Dependant.
So that I can create my own implementation and call that in a Standard BADI method.
Through SE18, it's not allowed to directly create BADI, I created an enhancement spot but while creating BADI in this process, it not giving me the option to make it filter dependent.
Is there any special process to create an independent BADI definition & to make filter dependent in ECC 6.0.
Thanks.

BADI: Diff between Multiuse & Filter Dependent

Hi All,
I would like to know whats the diff between Multiuse and Filter Dependent, Filter Types and Defined Filters.
Thanks,
Santosh

Multiple Use
This property defines whether during the initialization of a BAdI object using GET BADI just one implementation needs to be selected through the specified filter values, or whether an arbitrary number of implementations (or no implementation at all) can be selected.
If more than one implementation is selected at GET BADI for a BAdI provided for single use, the exception cx_badi_multiply_implemented is triggered. If no implementation is found, the exception cx_badi_not_implemented is triggered.
Use
You can define whether a BAdI is to be provided for single or multiple use. In the standard version, a BAdI is provided for single use, but a multiple use can also be selected.
In the case of a multiple use, there is a general restriction in addition to the general restriction regarding variable attributes that the BAdI methods must not have any EXPORTING or RETURNING parameters. The reason for this is that, if you have a call with CALL BADI, the methods of all the object plug-ins referenced by the BAdI object are called and that there is no definition regarding from which of the implementations a returned value will actually come. CHANGING parameters, on the other hand, are allowed since these are changed by all the calling methods, one after the other, so that a method can also access the parameter changed in a previous method.
Regards
- Gopi

Badi Multiple Use and Filter Dependent.

Dear Experts,
i Have enough Documents on Badi.
and My question is If we implement the Multiple Use the program calls all active implementations in Dynamic sequence.
to Call Particular Implmentation do we go for Filter dependent?
or is both concepts are independent .
Let me Know the difference
Regards
Raj.

Yes,Both Concepts are independent.
If the BADI Has checked with Muliple use check box then u can implement multiple implementation for that BADI for example check the BADI ME_PURCHDOC_POSTED Attributes tab.
If the check box is marked with Filter-dependent then u can implement based on the data element.Example check the BADI NOTIF_EVENT_SAVE Attibutes tab.

BADIs are not calling in BUPA_MAIN

Hello Friends,
I need to populate some Z fields when BDOc is flowing. I thought of writing this logic in BADIs (CRMXIF_PARTNER_MAP & CRM_DATAEXCHG_BADI ) . But these BADIs are not calling in debugging to check the data.
Please let me know do i need to do any settings to trigger these BADIs
Thanks & Regards
Dinesh

Hi,
CRMXIF_PARTNER_MAP is good for IDoc fields to be filled in (in or outgoing message).
Instead of thist try maybe with BUPA_GENERAL_UPDATE.
Regards, Robert

HR_IN_LOANS_VALIDATE badi is not called while infotype 45 is changed

Hi all,
I have activated badi:HR_IN_LOANS_VALIDATE implementation: ZHR_VALIDATE and its is working fine for creating Infotype 45 (INS) but when i change(MOD) it is not called. ie it does not enter the badi implementation code.
please see if you can help me.
thanks
Ujjaval

hi IA,
I have tried different combination in SWEHR3
E     Business event     1001     Relationships     A025     Is attended by     INS          0     PDOTYPE_E     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKF     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKP     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     CNOW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     CPRB     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKF     0     PDRELA_025     MODIFIED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKP     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     CNOW     0     PDRELA_025     CREATED
i did same thing in SWEHR2....still no luck...
please guide me if have any alternative options

Difference between multiple use and filter depend in BADis

Dear Experts,
Can u plz tell me the major difference between MULTIPLE USE and FILTER DEPEND types in badi definition.Is it possible to create a BAdi definition without selecting none of them
Thanks & regards,
vineel

You can differentiate between single-use and multiple use Business Add-Ins. The distinction is based on the procedure or event character of an enhancement. In the first case, the program waits for the enhancement to return something, usually a return code. A typical example could be a benefit calculation in HR. Depending on the implementation, alternative calculations can be executed. With multiple use add-ins, an event that may be of interest to other components is processed in program flow. Any number of components could use this event as a hook to hang their own additional actions on to.
Business Add-Ins may be implemented on the basis of a filter value. If an enhancement for country-specific versions is provided for in the standard version, it is likely that different partners will want to implement this enhancement. The individual countries can create and activate their own implementation.
Enter a filter type when defining your enhancement (a country or industry sector, for example). All methods created in the enhancement's interface have filter value FLT_VAL as their importing parameter. The application program provides the filter value for the enhancement method. The method then selects the active implementation for that value.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm

Filter dependent BADI TRIP_POST_FI is not calling.

Similar Messages

Maybe you are looking for